Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1752217AbbDTFDL (ORCPT ); Mon, 20 Apr 2015 01:03:11 -0400 Received: from down.free-electrons.com ([37.187.137.238]:50888 "EHLO mail.free-electrons.com" rhost-flags-OK-OK-OK-FAIL) by vger.kernel.org with ESMTP id S1750703AbbDTFC7 (ORCPT ); Mon, 20 Apr 2015 01:02:59 -0400 From: Michael Opdenacker To: torvalds@linux-foundation.org, jkosina@suse.cz Cc: edubezval@gmail.com, rdunlap@infradead.org, joe@perches.com, akpm@linux-foundation.org, arend@broadcom.com, gregkh@linuxfoundation.org, linux-kernel@vger.kernel.org, Michael Opdenacker Subject: [PATCH] [RESEND][TRIVIAL] treewide: fix occurrences of "the the " Date: Mon, 20 Apr 2015 07:02:31 +0200 Message-Id: <1429506151-21356-1-git-send-email-michael.opdenacker@free-electrons.com> X-Mailer: git-send-email 2.1.0 In-Reply-To: <553486C9.4040700@free-electrons.com> References: <553486C9.4040700@free-electrons.com> Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 179682 Lines: 3745 Fix all occurrences of "the the ", and occasionally "in in ", in the source code, comments and documentation. The replacement couldn't be automated because sometimes the first "the" was meant to be another word. Example: "according the the" meaning: "according to the" Note that I sometimes took the opportunity to fix other spelling issues or typos in the same sentences, and to reformat some comments impacted by the changes. I also fixed a few checkpatch errors in the same lines, but not all of them (should be addressed by separate patches). Signed-off-by: Michael Opdenacker Reviewed-by: rdunlap@infradead.org Acked-by: Eduardo Valentin --- Documentation/ABI/testing/sysfs-class-cxl | 4 ++-- Documentation/ABI/testing/sysfs-devices-memory | 2 +- Documentation/ABI/testing/sysfs-devices-soc | 2 +- Documentation/ABI/testing/sysfs-wusb_cbaf | 2 +- Documentation/DocBook/crypto-API.tmpl | 2 +- Documentation/DocBook/media/v4l/controls.xml | 2 +- Documentation/DocBook/media/v4l/vidioc-g-parm.xml | 2 +- Documentation/PCI/pci-error-recovery.txt | 4 ++-- Documentation/devicetree/bindings/arm/arm-boards | 2 +- .../devicetree/bindings/power/rockchip-io-domain.txt | 2 +- Documentation/filesystems/autofs4-mount-control.txt | 4 ++-- Documentation/filesystems/overlayfs.txt | 2 +- Documentation/filesystems/sysfs-tagging.txt | 2 +- Documentation/hwmon/lm93 | 2 +- Documentation/i2c/dev-interface | 2 +- Documentation/kernel-parameters.txt | 2 +- Documentation/networking/rxrpc.txt | 2 +- Documentation/networking/vxlan.txt | 2 +- Documentation/phy.txt | 2 +- Documentation/sysfs-rules.txt | 4 ++-- Documentation/vm/ksm.txt | 2 +- Documentation/vm/unevictable-lru.txt | 2 +- Documentation/xillybus.txt | 2 +- arch/arm/Kconfig | 2 +- arch/arm/include/asm/unwind.h | 2 +- arch/arm/mach-omap2/omap_hwmod.c | 6 +++--- arch/arm/mach-pxa/stargate2.c | 2 +- arch/arm64/crypto/aes-neon.S | 2 +- arch/blackfin/mach-common/entry.S | 2 +- arch/c6x/platforms/cache.c | 2 +- arch/ia64/include/asm/spinlock.h | 2 +- arch/ia64/include/asm/uv/uv_hub.h | 2 +- arch/m68k/coldfire/intc-2.c | 2 +- arch/metag/kernel/process.c | 2 +- arch/microblaze/kernel/entry.S | 2 +- arch/mips/alchemy/devboards/pm.c | 2 +- arch/mips/cavium-octeon/Kconfig | 2 +- arch/mips/include/asm/octeon/cvmx-pip.h | 2 +- arch/mips/include/asm/spinlock.h | 2 +- arch/mips/kvm/mips.c | 2 +- arch/mips/mm/c-octeon.c | 4 ++-- arch/mips/netlogic/xlr/fmn.c | 2 +- arch/powerpc/include/asm/cache.h | 2 +- arch/powerpc/include/asm/epapr_hcalls.h | 2 +- arch/powerpc/include/asm/hw_breakpoint.h | 2 +- arch/powerpc/kernel/head_64.S | 2 +- arch/powerpc/mm/hugetlbpage.c | 2 +- arch/powerpc/platforms/52xx/mpc52xx_gpt.c | 2 +- arch/powerpc/platforms/chrp/setup.c | 2 +- arch/powerpc/platforms/powernv/pci-ioda.c | 2 +- arch/powerpc/xmon/xmon.c | 2 +- arch/s390/kernel/perf_cpum_sf.c | 2 +- arch/s390/mm/gup.c | 2 +- arch/sparc/kernel/pci.c | 2 +- arch/sparc/mm/gup.c | 2 +- arch/tile/Kconfig | 2 +- arch/tile/include/asm/irqflags.h | 2 +- arch/tile/include/gxio/trio.h | 2 +- arch/tile/kernel/single_step.c | 2 +- arch/x86/Kconfig | 2 +- arch/x86/include/asm/spinlock.h | 2 +- arch/x86/include/asm/uv/uv_hub.h | 2 +- arch/x86/kernel/cpu/perf_event_intel_cqm.c | 2 +- arch/x86/kvm/x86.c | 2 +- arch/x86/mm/gup.c | 4 ++-- arch/x86/platform/efi/efi_thunk_64.S | 2 +- arch/x86/xen/setup.c | 2 +- arch/xtensa/include/asm/initialize_mmu.h | 2 +- arch/xtensa/kernel/entry.S | 12 ++++++------ crypto/asymmetric_keys/pkcs7_parser.h | 2 +- drivers/acpi/acpica/accommon.h | 2 +- drivers/acpi/acpica/tbfadt.c | 2 +- drivers/char/apm-emulation.c | 2 +- drivers/char/xilinx_hwicap/fifo_icap.c | 2 +- drivers/cpuidle/driver.c | 2 +- drivers/crypto/picoxcell_crypto.c | 2 +- drivers/crypto/ux500/hash/hash_core.c | 2 +- drivers/firmware/efi/runtime-wrappers.c | 2 +- drivers/gpio/gpio-ich.c | 2 +- drivers/gpio/gpio-sch.c | 2 +- drivers/gpu/drm/amd/amdkfd/kfd_device_queue_manager.h | 2 +- drivers/gpu/drm/drm_crtc.c | 2 +- drivers/gpu/drm/drm_mm.c | 4 ++-- drivers/gpu/drm/i915/i915_gem.c | 2 +- drivers/gpu/drm/i915/i915_gem_userptr.c | 2 +- drivers/gpu/drm/i915/intel_display.c | 4 ++-- drivers/gpu/drm/radeon/atombios.h | 4 ++-- drivers/gpu/drm/radeon/r300_reg.h | 2 +- drivers/gpu/drm/radeon/radeon_device.c | 2 +- drivers/gpu/drm/radeon/radeon_fence.c | 2 +- drivers/gpu/drm/radeon/radeon_vm.c | 4 ++-- drivers/hv/channel.c | 4 ++-- drivers/hv/vmbus_drv.c | 4 ++-- drivers/hwmon/pmbus/ucd9200.c | 2 +- drivers/infiniband/hw/ipath/ipath_common.h | 2 +- drivers/infiniband/hw/qib/qib.h | 2 +- drivers/input/mouse/gpio_mouse.c | 2 +- drivers/isdn/hardware/mISDN/hfcsusb.c | 2 +- drivers/lguest/core.c | 2 +- drivers/media/dvb-frontends/tda1002x.h | 2 +- drivers/media/dvb-frontends/tda10048.c | 2 +- drivers/media/pci/cx88/cx88-dsp.c | 2 +- drivers/media/pci/ivtv/ivtv-yuv.c | 2 +- drivers/media/pci/saa7164/saa7164-core.c | 2 +- drivers/media/platform/davinci/vpbe.c | 2 +- drivers/media/platform/exynos4-is/fimc-capture.c | 2 +- drivers/media/platform/omap3isp/isp.c | 2 +- drivers/media/usb/dvb-usb/friio-fe.c | 2 +- drivers/media/usb/dvb-usb/friio.c | 2 +- drivers/media/usb/dvb-usb/friio.h | 2 +- drivers/media/usb/gspca/finepix.c | 2 +- drivers/media/usb/tm6000/tm6000-cards.c | 2 +- drivers/media/usb/uvc/uvc_video.c | 2 +- drivers/media/v4l2-core/v4l2-ioctl.c | 2 +- drivers/memory/emif.c | 2 +- drivers/message/fusion/mptspi.c | 2 +- drivers/mfd/db8500-prcmu.c | 2 +- drivers/misc/mic/bus/mic_bus.c | 2 +- drivers/misc/sgi-gru/grukservices.c | 2 +- drivers/misc/sgi-xp/xpc_uv.c | 2 +- drivers/mmc/host/dw_mmc.c | 2 +- drivers/mtd/nand/gpmi-nand/gpmi-nand.c | 2 +- drivers/mtd/ubi/ubi.h | 4 ++-- drivers/mtd/ubi/wl.c | 2 +- drivers/net/can/xilinx_can.c | 2 +- drivers/net/ethernet/agere/et131x.c | 2 +- drivers/net/ethernet/calxeda/xgmac.c | 2 +- drivers/net/ethernet/emulex/benet/be_main.c | 2 +- drivers/net/ethernet/fujitsu/Kconfig | 2 +- drivers/net/ethernet/intel/e1000/e1000_hw.c | 2 +- drivers/net/ethernet/intel/e1000e/ich8lan.c | 2 +- drivers/net/ethernet/intel/fm10k/fm10k_mbx.c | 2 +- drivers/net/ethernet/intel/igb/e1000_82575.c | 2 +- drivers/net/ethernet/intel/ixgbe/ixgbe_main.c | 2 +- drivers/net/ethernet/neterion/s2io.c | 2 +- drivers/net/ethernet/rdc/Kconfig | 2 +- drivers/net/ethernet/xilinx/xilinx_axienet_mdio.c | 2 +- drivers/net/wimax/i2400m/i2400m.h | 4 ++-- drivers/net/wimax/i2400m/rx.c | 2 +- drivers/net/wimax/i2400m/tx.c | 2 +- drivers/net/wireless/ath/ath10k/rx_desc.h | 2 +- drivers/net/wireless/ath/ath6kl/hif.h | 2 +- drivers/net/wireless/ath/ath6kl/sdio.c | 2 +- drivers/net/wireless/ath/ath9k/ar9002_phy.c | 2 +- drivers/net/wireless/ath/ath9k/ar9003_phy.c | 2 +- drivers/net/wireless/ath/wcn36xx/hal.h | 8 ++++---- drivers/net/wireless/brcm80211/brcmsmac/main.c | 2 +- drivers/net/wireless/iwlwifi/mvm/fw-api-tx.h | 4 ++-- drivers/net/wireless/iwlwifi/mvm/phy-ctxt.c | 2 +- drivers/net/wireless/mwifiex/debugfs.c | 2 +- drivers/net/wireless/mwifiex/sdio.c | 2 +- drivers/net/wireless/rsi/rsi_91x_sdio.c | 4 ++-- drivers/net/wireless/ti/wl1251/acx.h | 2 +- drivers/pci/hotplug/acpiphp_glue.c | 2 +- drivers/pcmcia/pxa2xx_hx4700.c | 2 +- drivers/pinctrl/nomadik/pinctrl-nomadik.c | 2 +- drivers/pinctrl/pinctrl-at91.c | 2 +- drivers/power/power_supply_sysfs.c | 5 +++-- drivers/rtc/rtc-rs5c372.c | 2 +- drivers/s390/net/qeth_core_main.c | 2 +- drivers/scsi/aacraid/aachba.c | 2 +- drivers/scsi/bfa/bfa_fcs_rport.c | 2 +- drivers/scsi/fcoe/fcoe.c | 6 +++--- drivers/scsi/fcoe/fcoe_ctlr.c | 4 ++-- drivers/scsi/isci/host.h | 2 +- drivers/scsi/isci/remote_device.h | 2 +- drivers/scsi/isci/remote_node_context.h | 2 +- drivers/scsi/isci/task.c | 2 +- drivers/scsi/lpfc/lpfc_attr.c | 8 ++++---- drivers/scsi/lpfc/lpfc_els.c | 2 +- drivers/scsi/lpfc/lpfc_hbadisc.c | 4 ++-- drivers/scsi/lpfc/lpfc_init.c | 2 +- drivers/scsi/lpfc/lpfc_mbox.c | 2 +- drivers/scsi/lpfc/lpfc_sli.c | 2 +- drivers/scsi/pm8001/pm8001_hwi.c | 2 +- drivers/spi/spi-ppc4xx.c | 2 +- drivers/staging/iio/magnetometer/hmc5843_core.c | 2 +- drivers/staging/rtl8192u/ieee80211/ieee80211_rx.c | 2 +- drivers/staging/rtl8723au/core/rtw_cmd.c | 2 +- drivers/target/target_core_alua.c | 2 +- drivers/thunderbolt/ctl.h | 2 +- drivers/tty/hvc/Kconfig | 2 +- drivers/usb/host/max3421-hcd.c | 3 +-- drivers/usb/host/xhci-ring.c | 2 +- drivers/usb/serial/cypress_m8.c | 2 +- drivers/usb/serial/mos7720.c | 2 +- drivers/usb/wusbcore/devconnect.c | 2 +- drivers/uwb/drp-ie.c | 2 +- drivers/video/fbdev/omap/sossi.c | 2 +- drivers/video/fbdev/sis/sis_accel.c | 2 +- fs/autofs4/dev-ioctl.c | 2 +- fs/btrfs/dev-replace.c | 2 +- fs/btrfs/send.c | 2 +- fs/btrfs/tree-log.c | 2 +- fs/dcache.c | 4 ++-- fs/ecryptfs/keystore.c | 2 +- fs/ext2/ext2.h | 2 +- fs/ext4/inline.c | 4 ++-- fs/f2fs/segment.h | 2 +- fs/kernfs/file.c | 2 +- fs/ocfs2/localalloc.c | 2 +- fs/xfs/xfs_export.c | 2 +- include/drm/drm_rect.h | 2 +- include/linux/ieee80211.h | 2 +- include/linux/mic_bus.h | 2 +- include/linux/mm.h | 2 +- include/linux/moduleparam.h | 2 +- include/linux/skbuff.h | 2 +- include/media/v4l2-subdev.h | 4 ++-- include/net/caif/caif_layer.h | 2 +- include/net/ip6_fib.h | 2 +- include/net/wimax.h | 2 +- include/uapi/asm-generic/fcntl.h | 2 +- include/uapi/linux/android/binder.h | 2 +- init/Kconfig | 4 ++-- init/main.c | 2 +- kernel/jump_label.c | 2 +- kernel/printk/printk.c | 2 +- kernel/smp.c | 2 +- kernel/time/timekeeping.c | 2 +- kernel/trace/ring_buffer.c | 2 +- lib/Kconfig.debug | 2 +- lib/dynamic_queue_limits.c | 2 +- lib/earlycpio.c | 2 +- lib/syscall.c | 2 +- mm/hugetlb.c | 2 +- mm/page_alloc.c | 2 +- net/bluetooth/hci_conn.c | 2 +- net/bluetooth/hci_core.c | 2 +- net/ethernet/eth.c | 2 +- net/sctp/associola.c | 2 +- net/sctp/chunk.c | 2 +- net/sunrpc/auth_generic.c | 2 +- net/wimax/op-rfkill.c | 2 +- scripts/coccinelle/misc/badty.cocci | 2 +- scripts/tracing/draw_functrace.py | 2 +- security/apparmor/context.c | 2 +- security/keys/keyctl.c | 2 +- sound/pci/hda/hda_codec.c | 2 +- sound/pci/hda/hda_generic.c | 2 +- sound/pci/hda/patch_sigmatel.c | 2 +- sound/pci/ice1712/prodigy192.c | 2 +- sound/soc/codecs/wm9713.c | 2 +- sound/soc/fsl/fsl_dma.c | 2 +- sound/sparc/dbri.c | 2 +- tools/perf/Documentation/perf-diff.txt | 2 +- tools/thermal/tmon/pid.c | 2 +- 247 files changed, 286 insertions(+), 286 deletions(-) diff --git a/Documentation/ABI/testing/sysfs-class-cxl b/Documentation/ABI/testing/sysfs-class-cxl index d46bba801aac..c2a3e2ed8bac 100644 --- a/Documentation/ABI/testing/sysfs-class-cxl +++ b/Documentation/ABI/testing/sysfs-class-cxl @@ -77,8 +77,8 @@ What: /sys/class/cxl//api_version_compatible Date: September 2014 Contact: linuxppc-dev@lists.ozlabs.org Description: read only - Decimal value of the the lowest version of the userspace API - this this kernel supports. + Decimal value of the lowest version of the userspace API + this kernel supports. AFU configuration records (eg. /sys/class/cxl/afu0.0/cr0): diff --git a/Documentation/ABI/testing/sysfs-devices-memory b/Documentation/ABI/testing/sysfs-devices-memory index deef3b5723cf..9767745b99bd 100644 --- a/Documentation/ABI/testing/sysfs-devices-memory +++ b/Documentation/ABI/testing/sysfs-devices-memory @@ -45,7 +45,7 @@ Description: The file /sys/devices/system/memory/memoryX/state is read-write. When read, its contents show the online/offline state of the memory section. When written, - root can toggle the the online/offline state of a removable + root can toggle the online/offline state of a removable memory section (see removable file description above) using the following commands. # echo online > /sys/devices/system/memory/memoryX/state diff --git a/Documentation/ABI/testing/sysfs-devices-soc b/Documentation/ABI/testing/sysfs-devices-soc index 6d9cc253f2b2..331d8a12d506 100644 --- a/Documentation/ABI/testing/sysfs-devices-soc +++ b/Documentation/ABI/testing/sysfs-devices-soc @@ -44,7 +44,7 @@ What: /sys/devices/socX/process Date: January 2012 contact: Lee Jones Description: - Read-only attribute supported ST-Ericsson's silicon. Contains the + Read-only attribute supported ST-Ericsson's silicon. Contains the process by which the silicon chip was manufactured. What: /sys/bus/soc diff --git a/Documentation/ABI/testing/sysfs-wusb_cbaf b/Documentation/ABI/testing/sysfs-wusb_cbaf index a99c5f86a37a..0f3cf35d6cd8 100644 --- a/Documentation/ABI/testing/sysfs-wusb_cbaf +++ b/Documentation/ABI/testing/sysfs-wusb_cbaf @@ -58,7 +58,7 @@ Description: hex octets. Writes fetches device's supported band groups and the - the CDID for any existing association with this host. + CDID for any existing association with this host. What: /sys/bus/usb/drivers/wusb_cbaf/.../wusb_host_name Date: August 2008 diff --git a/Documentation/DocBook/crypto-API.tmpl b/Documentation/DocBook/crypto-API.tmpl index efc8d90a9a3f..0b05cd0d646f 100644 --- a/Documentation/DocBook/crypto-API.tmpl +++ b/Documentation/DocBook/crypto-API.tmpl @@ -443,7 +443,7 @@ The type flag specifies the type of the cipher algorithm. The caller usually provides a 0 when the caller wants the default handling. Otherwise, the caller may provide the - following selections which match the the aforementioned + following selections which match the aforementioned cipher types: diff --git a/Documentation/DocBook/media/v4l/controls.xml b/Documentation/DocBook/media/v4l/controls.xml index 4e9462f1ab4c..b018892f56da 100644 --- a/Documentation/DocBook/media/v4l/controls.xml +++ b/Documentation/DocBook/media/v4l/controls.xml @@ -3414,7 +3414,7 @@ giving priority to the center of the metered area. V4L2_EXPOSURE_METERING_MATRIX  A multi-zone metering. The light intensity is measured -in several points of the frame and the the results are combined. The +in several points of the frame and the results are combined. The algorithm of the zones selection and their significance in calculating the final value is device dependent. diff --git a/Documentation/DocBook/media/v4l/vidioc-g-parm.xml b/Documentation/DocBook/media/v4l/vidioc-g-parm.xml index f4e28e7d4751..721728745407 100644 --- a/Documentation/DocBook/media/v4l/vidioc-g-parm.xml +++ b/Documentation/DocBook/media/v4l/vidioc-g-parm.xml @@ -267,7 +267,7 @@ is intended for still imaging applications. The idea is to get the best possible image quality that the hardware can deliver. It is not defined how the driver writer may achieve that; it will depend on the hardware and the ingenuity of the driver writer. High quality mode is -a different mode from the the regular motion video capture modes. In +a different mode from the regular motion video capture modes. In high quality mode: The driver may be able to capture higher diff --git a/Documentation/PCI/pci-error-recovery.txt b/Documentation/PCI/pci-error-recovery.txt index ac26869c7db4..19c3fc5a7c67 100644 --- a/Documentation/PCI/pci-error-recovery.txt +++ b/Documentation/PCI/pci-error-recovery.txt @@ -255,8 +255,8 @@ The platform then proceeds to either STEP 4 (Slot Reset) or STEP 5 STEP 4: Slot Reset ------------------ -In response to a return value of PCI_ERS_RESULT_NEED_RESET, the -the platform will perform a slot reset on the requesting PCI device(s). +In response to a return value of PCI_ERS_RESULT_NEED_RESET, +the platform will perform a slot reset on the requesting PCI device(s). The actual steps taken by a platform to perform a slot reset will be platform-dependent. Upon completion of slot reset, the platform will call the device slot_reset() callback. diff --git a/Documentation/devicetree/bindings/arm/arm-boards b/Documentation/devicetree/bindings/arm/arm-boards index b78564b2b201..3c473ec1c885 100644 --- a/Documentation/devicetree/bindings/arm/arm-boards +++ b/Documentation/devicetree/bindings/arm/arm-boards @@ -113,7 +113,7 @@ Required properties (in root node): Required nodes: - soc: some node of the RealView platforms must be the SoC - node that contain the SoC-specific devices, withe the compatible + node that contain the SoC-specific devices, with the compatible string set to one of these tuples: "arm,realview-eb-soc", "simple-bus" "arm,realview-pb1176-soc", "simple-bus" diff --git a/Documentation/devicetree/bindings/power/rockchip-io-domain.txt b/Documentation/devicetree/bindings/power/rockchip-io-domain.txt index 8b70db103ca7..4679bde972c6 100644 --- a/Documentation/devicetree/bindings/power/rockchip-io-domain.txt +++ b/Documentation/devicetree/bindings/power/rockchip-io-domain.txt @@ -37,7 +37,7 @@ Required properties: You specify supplies using the standard regulator bindings by including -a phandle the relevant regulator. All specified supplies must be able +a phandle to the relevant regulator. All specified supplies must be able to report their voltage. The IO Voltage Domain for any non-specified supplies will be not be touched. diff --git a/Documentation/filesystems/autofs4-mount-control.txt b/Documentation/filesystems/autofs4-mount-control.txt index aff22113a986..e54896427b4a 100644 --- a/Documentation/filesystems/autofs4-mount-control.txt +++ b/Documentation/filesystems/autofs4-mount-control.txt @@ -373,7 +373,7 @@ variation uses the path and optionally arg1 set to an autofs mount type. The call returns 1 if this is a mount point and sets arg1 to the device number of the mount and field arg2 to the relevant super block magic number (described below) or 0 if it isn't a mountpoint. In both cases -the the device number (as returned by new_encode_dev()) is returned +the device number (as returned by new_encode_dev()) is returned in field arg1. If supplied with a file descriptor we're looking for a specific mount, @@ -387,7 +387,7 @@ is one or 0 if it isn't a mountpoint. If a path is supplied (and the ioctlfd field is set to -1) then the path is looked up and is checked to see if it is the root of a mount. If a type is also given we are looking for a particular autofs mount and if -a match isn't found a fail is returned. If the the located path is the +a match isn't found a fail is returned. If the located path is the root of a mount 1 is returned along with the super magic of the mount or 0 otherwise. diff --git a/Documentation/filesystems/overlayfs.txt b/Documentation/filesystems/overlayfs.txt index 6db0e5d1da07..570ab727b379 100644 --- a/Documentation/filesystems/overlayfs.txt +++ b/Documentation/filesystems/overlayfs.txt @@ -162,7 +162,7 @@ rename or unlink will of course be noticed and handled). Multiple lower layers --------------------- -Multiple lower layers can now be given using the the colon (":") as a +Multiple lower layers can now be given using the colon (":") as a separator character between the directory names. For example: mount -t overlay overlay -olowerdir=/lower1:/lower2:/lower3 /merged diff --git a/Documentation/filesystems/sysfs-tagging.txt b/Documentation/filesystems/sysfs-tagging.txt index eb843e49c5a3..72f1e2709049 100644 --- a/Documentation/filesystems/sysfs-tagging.txt +++ b/Documentation/filesystems/sysfs-tagging.txt @@ -12,7 +12,7 @@ To avoid that problem and allow existing applications in network namespaces to see the same interface that is currently presented in sysfs, sysfs now has tagging directory support. -By using the network namespace pointers as tags to separate out the +By using the network namespace pointers as tags to separate out the sysfs directory entries we ensure that we don't have conflicts in the directories and applications only see a limited set of the network devices. diff --git a/Documentation/hwmon/lm93 b/Documentation/hwmon/lm93 index f3b2ad2ceb01..29323ecb6b68 100644 --- a/Documentation/hwmon/lm93 +++ b/Documentation/hwmon/lm93 @@ -122,7 +122,7 @@ Smart Tach Mode: achieved despite the signal corruption. In smart tach mode all four signals are measured within 4 seconds. -Smart tach mode is enabled by the driver by writing 1 or 2 (associating the +Smart tach mode is enabled by the driver by writing 1 or 2 (associating the fan tachometer with a pwm) to the sysfs file fan_smart_tach. A zero will disable the function for that fan. Note that Smart tach mode cannot be enabled if the PWM output frequency is 22500 Hz (see below). diff --git a/Documentation/i2c/dev-interface b/Documentation/i2c/dev-interface index 2ac78ae1039d..259dd4ee064d 100644 --- a/Documentation/i2c/dev-interface +++ b/Documentation/i2c/dev-interface @@ -113,7 +113,7 @@ ioctl(file, I2C_TENBIT, long select) ioctl(file, I2C_PEC, long select) Selects SMBus PEC (packet error checking) generation and verification if select not equals 0, disables if select equals 0. Default 0. - Used only for SMBus transactions. This request only has an effect if the + Used only for SMBus transactions. This request only has an effect if the adapter has I2C_FUNC_SMBUS_PEC; it is still safe if not, it just doesn't have any effect. diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt index 274252f205b7..c94b7d35fb6b 100644 --- a/Documentation/kernel-parameters.txt +++ b/Documentation/kernel-parameters.txt @@ -2755,7 +2755,7 @@ bytes respectively. Such letter suffixes can also be entirely omitted. windows need to be expanded. ecrc= Enable/disable PCIe ECRC (transaction layer end-to-end CRC checking). - bios: Use BIOS/firmware settings. This is the + bios: Use BIOS/firmware settings. This is the default. off: Turn ECRC off on: Turn ECRC on. diff --git a/Documentation/networking/rxrpc.txt b/Documentation/networking/rxrpc.txt index 16a924c486bf..369deeb194e7 100644 --- a/Documentation/networking/rxrpc.txt +++ b/Documentation/networking/rxrpc.txt @@ -233,7 +233,7 @@ Interaction with the user of the RxRPC socket: without fear of interference. (*) In the server, a request is received with one or more recvmsgs, then the - the reply is transmitted with one or more sendmsgs, and then the final ACK + reply is transmitted with one or more sendmsgs, and then the final ACK is received with a last recvmsg. (*) When sending data for a call, sendmsg is given MSG_MORE if there's more diff --git a/Documentation/networking/vxlan.txt b/Documentation/networking/vxlan.txt index 6d993510f091..8c95975dc898 100644 --- a/Documentation/networking/vxlan.txt +++ b/Documentation/networking/vxlan.txt @@ -25,7 +25,7 @@ where VXLAN was first merged upstream. # ip li add vxlan0 type vxlan id 42 group 239.1.1.1 dev eth1 This creates a new device (vxlan0). The device uses the -the multicast group 239.1.1.1 over eth1 to handle packets where +multicast group 239.1.1.1 over eth1 to handle packets where no entry is in the forwarding table. 2. Delete vxlan device diff --git a/Documentation/phy.txt b/Documentation/phy.txt index 371361c69a4b..6bce2443f9fc 100644 --- a/Documentation/phy.txt +++ b/Documentation/phy.txt @@ -83,7 +83,7 @@ should contain the phy name as given in the dt data and in the case of non-dt boot, it should contain the label of the PHY. The two devm_phy_get associates the device with the PHY using devres on successful PHY get. On driver detach, release function is invoked on -the the devres data and devres data is freed. phy_optional_get and +the devres data and devres data is freed. phy_optional_get and devm_phy_optional_get should be used when the phy is optional. These two functions will never return -ENODEV, but instead returns NULL when the phy cannot be found. diff --git a/Documentation/sysfs-rules.txt b/Documentation/sysfs-rules.txt index ce60ffa94d2d..9243d0498b2d 100644 --- a/Documentation/sysfs-rules.txt +++ b/Documentation/sysfs-rules.txt @@ -176,8 +176,8 @@ versions of the sysfs interface. -ENXIO: The read or store operation failed Error codes will not be changed without good reason, and should a change - to error codes result in user-space breakage, it will be fixed, or the - the offending change will be reverted. + to error codes result in user-space breakage, it will be fixed, + or the offending change will be reverted. Userspace applications can, however, expect the format and contents of the attribute files to remain consistent in the absence of a version diff --git a/Documentation/vm/ksm.txt b/Documentation/vm/ksm.txt index f34a8ee6f860..f0a536cfc0fb 100644 --- a/Documentation/vm/ksm.txt +++ b/Documentation/vm/ksm.txt @@ -33,7 +33,7 @@ probably arousing the Out-Of-Memory killer. If KSM is not configured into the running kernel, madvise MADV_MERGEABLE and MADV_UNMERGEABLE simply fail with EINVAL. If the running kernel was built with CONFIG_KSM=y, those calls will normally succeed: even if the -the KSM daemon is not currently running, MADV_MERGEABLE still registers +KSM daemon is not currently running, MADV_MERGEABLE still registers the range for whenever the KSM daemon is started; even if the range cannot contain any pages which KSM could actually merge; even if MADV_UNMERGEABLE is applied to a range which was never MADV_MERGEABLE. diff --git a/Documentation/vm/unevictable-lru.txt b/Documentation/vm/unevictable-lru.txt index 3be0bfc4738d..823ad88908f3 100644 --- a/Documentation/vm/unevictable-lru.txt +++ b/Documentation/vm/unevictable-lru.txt @@ -465,7 +465,7 @@ MLOCKED PAGES will apply. mmap(MAP_LOCKED) SYSTEM CALL HANDLING ------------------------------------- -In addition the mlock()/mlockall() system calls, an application can request +In addition to the mlock()/mlockall() system calls, an application can request that a region of memory be mlocked supplying the MAP_LOCKED flag to the mmap() call. Furthermore, any mmap() call or brk() call that expands the heap by a task that has previously called mlockall() with the MCL_FUTURE flag will result diff --git a/Documentation/xillybus.txt b/Documentation/xillybus.txt index 81d111b4dc28..7cc1ea9a4215 100644 --- a/Documentation/xillybus.txt +++ b/Documentation/xillybus.txt @@ -274,7 +274,7 @@ buffer is full, the FPGA informs the host about that (appending a XILLYMSG_OPCODE_RELEASEBUF message channel 0 and sending an interrupt if necessary). The host responds by making the data available for reading through the character device. When all data has been read, the host writes on the -the FPGA's buffer control register, allowing the buffer's overwriting. Flow +FPGA's buffer control register, allowing the buffer's overwriting. Flow control mechanisms exist on both sides to prevent underflows and overflows. This is not good enough for creating a TCP/IP-like stream: If the data flow diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 392e7ae69452..36f36818288f 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -1932,7 +1932,7 @@ config ARM_ATAG_DTB_COMPAT_CMDLINE_EXTEND bool "Extend with bootloader kernel arguments" help The command-line arguments provided by the boot loader will be - appended to the the device tree bootargs property. + appended to the device tree bootargs property. endchoice diff --git a/arch/arm/include/asm/unwind.h b/arch/arm/include/asm/unwind.h index d1c3f3a71c94..4f697edd0bad 100644 --- a/arch/arm/include/asm/unwind.h +++ b/arch/arm/include/asm/unwind.h @@ -22,7 +22,7 @@ #ifndef __ASSEMBLY__ -/* Unwind reason code according the the ARM EABI documents */ +/* Unwind reason code according to the ARM EABI documents */ enum unwind_reason_code { URC_OK = 0, /* operation completed successfully */ URC_CONTINUE_UNWIND = 8, diff --git a/arch/arm/mach-omap2/omap_hwmod.c b/arch/arm/mach-omap2/omap_hwmod.c index 355b08936871..2a7ffd01065e 100644 --- a/arch/arm/mach-omap2/omap_hwmod.c +++ b/arch/arm/mach-omap2/omap_hwmod.c @@ -752,7 +752,7 @@ static int _del_initiator_dep(struct omap_hwmod *oh, struct omap_hwmod *init_oh) } /** - * _init_main_clk - get a struct clk * for the the hwmod's main functional clk + * _init_main_clk - get a struct clk * for the hwmod's main functional clk * @oh: struct omap_hwmod * * * Called from _init_clocks(). Populates the @oh _clk (main @@ -790,7 +790,7 @@ static int _init_main_clk(struct omap_hwmod *oh) } /** - * _init_interface_clks - get a struct clk * for the the hwmod's interface clks + * _init_interface_clks - get a struct clk * for the hwmod's interface clks * @oh: struct omap_hwmod * * * Called from _init_clocks(). Populates the @oh OCP slave interface @@ -834,7 +834,7 @@ static int _init_interface_clks(struct omap_hwmod *oh) } /** - * _init_opt_clk - get a struct clk * for the the hwmod's optional clocks + * _init_opt_clk - get a struct clk * for the hwmod's optional clocks * @oh: struct omap_hwmod * * * Called from _init_clocks(). Populates the @oh omap_hwmod_opt_clk diff --git a/arch/arm/mach-pxa/stargate2.c b/arch/arm/mach-pxa/stargate2.c index 01de542432a6..6f92e75b6c35 100644 --- a/arch/arm/mach-pxa/stargate2.c +++ b/arch/arm/mach-pxa/stargate2.c @@ -423,7 +423,7 @@ static void __init imote2_stargate2_init(void) } #ifdef CONFIG_MACH_INTELMOTE2 -/* As the the imote2 doesn't currently have a conventional SD slot +/* As the imote2 doesn't currently have a conventional SD slot * there is no option to hotplug cards, making all this rather simple */ static int imote2_mci_get_ro(struct device *dev) diff --git a/arch/arm64/crypto/aes-neon.S b/arch/arm64/crypto/aes-neon.S index b93170e1cc93..d0f01cff23b3 100644 --- a/arch/arm64/crypto/aes-neon.S +++ b/arch/arm64/crypto/aes-neon.S @@ -47,7 +47,7 @@ prepare .LReverse_Sbox, .LReverse_ShiftRows, \temp .endm - /* apply SubBytes transformation using the the preloaded Sbox */ + /* apply SubBytes transformation using the preloaded Sbox */ .macro sub_bytes, in sub v9.16b, \in\().16b, v12.16b tbl \in\().16b, {v16.16b-v19.16b}, \in\().16b diff --git a/arch/blackfin/mach-common/entry.S b/arch/blackfin/mach-common/entry.S index 86b5a095c5a1..9c8612385e00 100644 --- a/arch/blackfin/mach-common/entry.S +++ b/arch/blackfin/mach-common/entry.S @@ -480,7 +480,7 @@ ENTRY(_trap) /* Exception: 4th entry into system event table(supervisor mode)*/ #ifdef CONFIG_EXACT_HWERR /* Make sure all pending read/writes complete. This will ensure any * accesses which could cause hardware errors completes, and signal - * the the hardware before we do something silly, like crash the + * the hardware before we do something silly, like crash the * kernel. We don't need to work around anomaly 05000312, since * we are already atomic */ diff --git a/arch/c6x/platforms/cache.c b/arch/c6x/platforms/cache.c index 46fd2d530271..2853e4fc2fdf 100644 --- a/arch/c6x/platforms/cache.c +++ b/arch/c6x/platforms/cache.c @@ -439,7 +439,7 @@ void __init c6x_cache_init(void) if (!cache_base) return; - /* Set L2 caches on the the whole L2 SRAM memory */ + /* Set L2 caches on the whole L2 SRAM memory */ L2_cache_set_mode(L2MODE_SIZE); /* Enable L1 */ diff --git a/arch/ia64/include/asm/spinlock.h b/arch/ia64/include/asm/spinlock.h index 45698cd15b7b..bd6ea40f3ef9 100644 --- a/arch/ia64/include/asm/spinlock.h +++ b/arch/ia64/include/asm/spinlock.h @@ -23,7 +23,7 @@ * the queue, and the other indicating the current tail. The lock is acquired * by atomically noting the tail and incrementing it by one (thus adding * ourself to the queue and noting our position), then waiting until the head - * becomes equal to the the initial value of the tail. + * becomes equal to the initial value of the tail. * The pad bits in the middle are used to prevent the next_ticket number * overflowing into the now_serving number. * diff --git a/arch/ia64/include/asm/uv/uv_hub.h b/arch/ia64/include/asm/uv/uv_hub.h index 2a88c7204e52..809ddb6896db 100644 --- a/arch/ia64/include/asm/uv/uv_hub.h +++ b/arch/ia64/include/asm/uv/uv_hub.h @@ -257,7 +257,7 @@ static inline int uv_numa_blade_id(void) return 0; } -/* Convert a cpu number to the the UV blade number */ +/* Convert a cpu number to the UV blade number */ static inline int uv_cpu_to_blade_id(int cpu) { return 0; diff --git a/arch/m68k/coldfire/intc-2.c b/arch/m68k/coldfire/intc-2.c index 995093357c59..f74f0e473119 100644 --- a/arch/m68k/coldfire/intc-2.c +++ b/arch/m68k/coldfire/intc-2.c @@ -7,7 +7,7 @@ * family, the 5270, 5271, 5274, 5275, and the 528x family which have two such * controllers, and the 547x and 548x families which have only one of them. * - * The external 7 fixed interrupts are part the the Edge Port unit of these + * The external 7 fixed interrupts are part of the Edge Port unit of these * ColdFire parts. They can be configured as level or edge triggered. * * (C) Copyright 2009-2011, Greg Ungerer diff --git a/arch/metag/kernel/process.c b/arch/metag/kernel/process.c index 483dff986a23..30052da1f1a4 100644 --- a/arch/metag/kernel/process.c +++ b/arch/metag/kernel/process.c @@ -211,7 +211,7 @@ int copy_thread(unsigned long clone_flags, unsigned long usp, /* * Get a pointer to where the new child's register block should have * been pushed. - * The Meta's stack grows upwards, and the context is the the first + * The Meta's stack grows upwards, and the context is the first * thing to be pushed by TBX (phew) */ *childregs = *current_pt_regs(); diff --git a/arch/microblaze/kernel/entry.S b/arch/microblaze/kernel/entry.S index ef548510b951..d0c28f6863b4 100644 --- a/arch/microblaze/kernel/entry.S +++ b/arch/microblaze/kernel/entry.S @@ -446,7 +446,7 @@ TRAP_return: /* Make global symbol for debugging */ /* This the initial entry point for a new child thread, with an appropriate - stack in place that makes it look the the child is in the middle of an + stack in place that makes it look like the child is in the middle of an syscall. This function is actually `returned to' from switch_thread (copy_thread makes ret_from_fork the return address in each new thread's saved context). */ diff --git a/arch/mips/alchemy/devboards/pm.c b/arch/mips/alchemy/devboards/pm.c index bfeb8f3c0be6..203767dbeb64 100644 --- a/arch/mips/alchemy/devboards/pm.c +++ b/arch/mips/alchemy/devboards/pm.c @@ -16,7 +16,7 @@ * Generic suspend userspace interface for Alchemy development boards. * This code exports a few sysfs nodes under /sys/power/db1x/ which * can be used by userspace to en/disable all au1x-provided wakeup - * sources and configure the timeout after which the the TOYMATCH2 irq + * sources and configure the timeout after which the TOYMATCH2 irq * is to trigger a wakeup. */ diff --git a/arch/mips/cavium-octeon/Kconfig b/arch/mips/cavium-octeon/Kconfig index c370426a7322..7f122c1d5d0e 100644 --- a/arch/mips/cavium-octeon/Kconfig +++ b/arch/mips/cavium-octeon/Kconfig @@ -90,7 +90,7 @@ config OCTEON_ILM tristate "Module to measure interrupt latency using Octeon CIU Timer" help This driver is a module to measure interrupt latency using the - the CIU Timers on Octeon. + CIU Timers on Octeon. To compile this driver as a module, choose M here. The module will be called octeon-ilm diff --git a/arch/mips/include/asm/octeon/cvmx-pip.h b/arch/mips/include/asm/octeon/cvmx-pip.h index df69bfd2b006..4ec669f5b0d4 100644 --- a/arch/mips/include/asm/octeon/cvmx-pip.h +++ b/arch/mips/include/asm/octeon/cvmx-pip.h @@ -503,7 +503,7 @@ static inline void cvmx_pip_tag_mask_clear(uint64_t mask_index) * offsetof() to determine the offsets into packet headers. * For example, offsetof(ethhdr, protocol) returns the offset * of the ethernet protocol field. The bitmask selects which - * bytes to include the the tag, with bit offset X selecting + * bytes to include in the tag, with bit offset X selecting * byte at offset X from the beginning of the packet data. * @len: Number of bytes to include. Usually this is the sizeof() * the field. diff --git a/arch/mips/include/asm/spinlock.h b/arch/mips/include/asm/spinlock.h index 1fca2e0793dc..fe0c7bbf4d5f 100644 --- a/arch/mips/include/asm/spinlock.h +++ b/arch/mips/include/asm/spinlock.h @@ -32,7 +32,7 @@ * the queue, and the other indicating the current tail. The lock is acquired * by atomically noting the tail and incrementing it by one (thus adding * ourself to the queue and noting our position), then waiting until the head - * becomes equal to the the initial value of the tail. + * becomes equal to the initial value of the tail. */ static inline int arch_spin_is_locked(arch_spinlock_t *lock) diff --git a/arch/mips/kvm/mips.c b/arch/mips/kvm/mips.c index bb68e8d520e8..ad1ba911a158 100644 --- a/arch/mips/kvm/mips.c +++ b/arch/mips/kvm/mips.c @@ -1629,7 +1629,7 @@ int __init kvm_mips_init(void) * requires TLBs. The TLB handling code is statically linked with * the rest of the kernel (tlb.c) to avoid the possibility of * double faulting. The issue is that the TLB code references - * routines that are part of the the KVM module, which are only + * routines that are part of the KVM module, which are only * available once the module is loaded. */ kvm_mips_gfn_to_pfn = gfn_to_pfn; diff --git a/arch/mips/mm/c-octeon.c b/arch/mips/mm/c-octeon.c index 05b1d7cf9514..1647426364b9 100644 --- a/arch/mips/mm/c-octeon.c +++ b/arch/mips/mm/c-octeon.c @@ -350,7 +350,7 @@ static void co_cache_error_call_notifiers(unsigned long val) } /* - * Called when the the exception is recoverable + * Called when the exception is recoverable */ asmlinkage void cache_parity_error_octeon_recoverable(void) @@ -359,7 +359,7 @@ asmlinkage void cache_parity_error_octeon_recoverable(void) } /** - * Called when the the exception is not recoverable + * Called when the exception is not recoverable */ asmlinkage void cache_parity_error_octeon_non_recoverable(void) diff --git a/arch/mips/netlogic/xlr/fmn.c b/arch/mips/netlogic/xlr/fmn.c index d428e8471eec..1d1eb1e10ae2 100644 --- a/arch/mips/netlogic/xlr/fmn.c +++ b/arch/mips/netlogic/xlr/fmn.c @@ -144,7 +144,7 @@ void xlr_percpu_fmn_init(void) * For sending FMN messages, we need credits on the destination * bucket. Program the credits this core has on the 128 possible * destination buckets. - * We cannot use a loop here, because the the first argument has + * We cannot use a loop here, because the first argument has * to be a constant integer value. */ COP2_CC_INIT_CPU_DEST(0, cpu_fmn_info->credit_config); diff --git a/arch/powerpc/include/asm/cache.h b/arch/powerpc/include/asm/cache.h index 0dc42c5082b7..04b90ad406b4 100644 --- a/arch/powerpc/include/asm/cache.h +++ b/arch/powerpc/include/asm/cache.h @@ -52,7 +52,7 @@ static inline void logmpp(u64 x) /* * For a snooping icache, we still need a dummy icbi to purge all the * prefetched instructions from the ifetch buffers. We also need a sync - * before the icbi to order the the actual stores to memory that might + * before the icbi to order the actual stores to memory that might * have modified instructions with the icbi. */ #define PURGE_PREFETCHED_INS \ diff --git a/arch/powerpc/include/asm/epapr_hcalls.h b/arch/powerpc/include/asm/epapr_hcalls.h index 334459ad145b..b3219b0ca2c4 100644 --- a/arch/powerpc/include/asm/epapr_hcalls.h +++ b/arch/powerpc/include/asm/epapr_hcalls.h @@ -246,7 +246,7 @@ static inline unsigned int ev_int_get_mask(unsigned int interrupt, * ev_int_eoi - signal the end of interrupt processing * @interrupt: the interrupt number * - * This function signals the end of processing for the the specified + * This function signals the end of processing for the specified * interrupt, which must be the interrupt currently in service. By * definition, this is also the highest-priority interrupt. * diff --git a/arch/powerpc/include/asm/hw_breakpoint.h b/arch/powerpc/include/asm/hw_breakpoint.h index ac6432d9be46..a18702780733 100644 --- a/arch/powerpc/include/asm/hw_breakpoint.h +++ b/arch/powerpc/include/asm/hw_breakpoint.h @@ -30,7 +30,7 @@ struct arch_hw_breakpoint { u16 len; /* length of the target data symbol */ }; -/* Note: Don't change the the first 6 bits below as they are in the same order +/* Note: Don't change the first 6 bits below as they are in the same order * as the dabr and dabrx. */ #define HW_BRK_TYPE_READ 0x01 diff --git a/arch/powerpc/kernel/head_64.S b/arch/powerpc/kernel/head_64.S index d48125d0c048..01ecece4ca83 100644 --- a/arch/powerpc/kernel/head_64.S +++ b/arch/powerpc/kernel/head_64.S @@ -94,7 +94,7 @@ __secondary_hold_acknowledge: #ifdef CONFIG_RELOCATABLE /* This flag is set to 1 by a loader if the kernel should run * at the loaded address instead of the linked address. This - * is used by kexec-tools to keep the the kdump kernel in the + * is used by kexec-tools to keep the kdump kernel in the * crash_kernel region. The loader is responsible for * observing the alignment requirement. */ diff --git a/arch/powerpc/mm/hugetlbpage.c b/arch/powerpc/mm/hugetlbpage.c index fa9d5c238d22..ffb5c0fd38b0 100644 --- a/arch/powerpc/mm/hugetlbpage.c +++ b/arch/powerpc/mm/hugetlbpage.c @@ -948,7 +948,7 @@ void flush_dcache_icache_hugepage(struct page *page) * (4) hugepd pointer, bottom two bits == 00, next 4 bits indicate size of table * * So long as we atomically load page table pointers we are safe against teardown, - * we can follow the address down to the the page and take a ref on it. + * we can follow the address down to the page and take a ref on it. */ pte_t *find_linux_pte_or_hugepte(pgd_t *pgdir, unsigned long ea, unsigned *shift) diff --git a/arch/powerpc/platforms/52xx/mpc52xx_gpt.c b/arch/powerpc/platforms/52xx/mpc52xx_gpt.c index c949ca055712..27cc1a222295 100644 --- a/arch/powerpc/platforms/52xx/mpc52xx_gpt.c +++ b/arch/powerpc/platforms/52xx/mpc52xx_gpt.c @@ -9,7 +9,7 @@ * Free Software Foundation; either version 2 of the License, or (at your * option) any later version. * - * This file is a driver for the the General Purpose Timer (gpt) devices + * This file is a driver for the General Purpose Timer (gpt) devices * found on the MPC5200 SoC. Each timer has an IO pin which can be used * for GPIO or can be used to raise interrupts. The timer function can * be used independently from the IO pin, or it can be used to control diff --git a/arch/powerpc/platforms/chrp/setup.c b/arch/powerpc/platforms/chrp/setup.c index 15ebc4e8a151..6a0866904818 100644 --- a/arch/powerpc/platforms/chrp/setup.c +++ b/arch/powerpc/platforms/chrp/setup.c @@ -251,7 +251,7 @@ static void briq_restart(char *cmd) * Per default, input/output-device points to the keyboard/screen * If no card is installed, the built-in serial port is used as a fallback. * But unfortunately, the firmware does not connect /chosen/{stdin,stdout} - * the the built-in serial node. Instead, a /failsafe node is created. + * to the built-in serial node. Instead, a /failsafe node is created. */ static __init void chrp_init_early(void) { diff --git a/arch/powerpc/platforms/powernv/pci-ioda.c b/arch/powerpc/platforms/powernv/pci-ioda.c index 920c252d1f49..c72ecc21f8f4 100644 --- a/arch/powerpc/platforms/powernv/pci-ioda.c +++ b/arch/powerpc/platforms/powernv/pci-ioda.c @@ -2418,7 +2418,7 @@ static void pnv_pci_ioda_fixup_iov_resources(struct pci_dev *pdev) /* * This function is supposed to be called on basis of PE from top - * to bottom style. So the the I/O or MMIO segment assigned to + * to bottom style. So the I/O or MMIO segment assigned to * parent PE could be overrided by its child PEs if necessary. */ static void pnv_ioda_setup_pe_seg(struct pci_controller *hose, diff --git a/arch/powerpc/xmon/xmon.c b/arch/powerpc/xmon/xmon.c index e599259d84fc..e1766153202e 100644 --- a/arch/powerpc/xmon/xmon.c +++ b/arch/powerpc/xmon/xmon.c @@ -293,7 +293,7 @@ static void write_ciabr(unsigned long ciabr) * set_ciabr() - set the CIABR * @addr: The value to set. * - * This function sets the correct privilege value into the the HW + * This function sets the correct privilege value into the HW * breakpoint address before writing it up in the CIABR register. */ static void set_ciabr(unsigned long addr) diff --git a/arch/s390/kernel/perf_cpum_sf.c b/arch/s390/kernel/perf_cpum_sf.c index e6a1578fc000..c14898e820ba 100644 --- a/arch/s390/kernel/perf_cpum_sf.c +++ b/arch/s390/kernel/perf_cpum_sf.c @@ -1128,7 +1128,7 @@ static void debug_sample_entry(struct hws_combined_entry *sample, * combined-sampling data entry consists of a basic- and a diagnostic-sampling * data entry. The sampling function is determined by the flags in the perf * event hardware structure. The function always works with a combined-sampling - * data entry but ignores the the diagnostic portion if it is not available. + * data entry but ignores the diagnostic portion if it is not available. * * Note that the implementation focuses on basic-sampling data entries and, if * such an entry is not valid, the entire combined-sampling data entry is diff --git a/arch/s390/mm/gup.c b/arch/s390/mm/gup.c index 1eb41bb3010c..d56b7ddc651d 100644 --- a/arch/s390/mm/gup.c +++ b/arch/s390/mm/gup.c @@ -183,7 +183,7 @@ int __get_user_pages_fast(unsigned long start, int nr_pages, int write, * prevent the pagetables from being freed on s390. * * So long as we atomically load page table pointers versus teardown, - * we can follow the address down to the the page and take a ref on it. + * we can follow the address down to the page and take a ref on it. */ local_irq_save(flags); pgdp = pgd_offset(mm, addr); diff --git a/arch/sparc/kernel/pci.c b/arch/sparc/kernel/pci.c index 6f7251fd2eab..f9baa6852bd2 100644 --- a/arch/sparc/kernel/pci.c +++ b/arch/sparc/kernel/pci.c @@ -306,7 +306,7 @@ static struct pci_dev *of_create_pci_dev(struct pci_pbm_info *pbm, /* We can't actually use the firmware value, we have * to read what is in the register right now. One * reason is that in the case of IDE interfaces the - * firmware can sample the value before the the IDE + * firmware can sample the value before the IDE * interface is programmed into native mode. */ pci_read_config_dword(dev, PCI_CLASS_REVISION, &class); diff --git a/arch/sparc/mm/gup.c b/arch/sparc/mm/gup.c index 2e5c4fc2daa9..d2154ab0bfe2 100644 --- a/arch/sparc/mm/gup.c +++ b/arch/sparc/mm/gup.c @@ -219,7 +219,7 @@ int get_user_pages_fast(unsigned long start, int nr_pages, int write, * the pagetables from being freed on sparc. * * So long as we atomically load page table pointers versus teardown, - * we can follow the address down to the the page and take a ref on it. + * we can follow the address down to the page and take a ref on it. */ local_irq_disable(); diff --git a/arch/tile/Kconfig b/arch/tile/Kconfig index a07e31b50d3f..85abaa483bcf 100644 --- a/arch/tile/Kconfig +++ b/arch/tile/Kconfig @@ -339,7 +339,7 @@ config CMDLINE_BOOL To compile command line arguments into the kernel, set this option to 'Y', then fill in the - the boot arguments in CONFIG_CMDLINE. + boot arguments in CONFIG_CMDLINE. Systems with fully functional boot loaders (e.g. mboot, or if booting over PCI) should leave this option set to 'N'. diff --git a/arch/tile/include/asm/irqflags.h b/arch/tile/include/asm/irqflags.h index 60d62a292fce..a9554b167e96 100644 --- a/arch/tile/include/asm/irqflags.h +++ b/arch/tile/include/asm/irqflags.h @@ -116,7 +116,7 @@ * Note that in particular, the tile timer interrupt comes and goes * from this set, since we have no other way to turn off the timer. * Likewise, INTCTRL_K is removed and re-added during device - * interrupts, as is the the hardwall UDN_FIREWALL interrupt. + * interrupts, as is the hardwall UDN_FIREWALL interrupt. * We use a low bit (MEM_ERROR) as our sentinel value and make sure it * is always claimed as an "active interrupt" so we can query that bit * to know our current state. diff --git a/arch/tile/include/gxio/trio.h b/arch/tile/include/gxio/trio.h index df10a662cc25..50a3d5cbad20 100644 --- a/arch/tile/include/gxio/trio.h +++ b/arch/tile/include/gxio/trio.h @@ -206,7 +206,7 @@ typedef struct { /* Initialize a TRIO context. * * This function allocates a TRIO "service domain" and maps the MMIO - * registers into the the caller's VA space. + * registers into the caller's VA space. * * @param trio_index Which TRIO shim; Gx36 must pass 0. * @param context Context object to be initialized. diff --git a/arch/tile/kernel/single_step.c b/arch/tile/kernel/single_step.c index 53f7b9def07b..ea5e7e84fcf0 100644 --- a/arch/tile/kernel/single_step.c +++ b/arch/tile/kernel/single_step.c @@ -276,7 +276,7 @@ P("\n"); /* * Called after execve() has started the new image. This allows us - * to reset the info state. Note that the the mmap'ed memory, if there + * to reset the info state. Note that the mmap'ed memory, if there * was any, has already been unmapped by the exec. */ void single_step_execve(void) diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig index 6049d587599e..9cc08595528c 100644 --- a/arch/x86/Kconfig +++ b/arch/x86/Kconfig @@ -2013,7 +2013,7 @@ config CMDLINE_BOOL To compile command line arguments into the kernel, set this option to 'Y', then fill in the - the boot arguments in CONFIG_CMDLINE. + boot arguments in CONFIG_CMDLINE. Systems with fully functional boot loaders (i.e. non-embedded) should leave this option set to 'N'. diff --git a/arch/x86/include/asm/spinlock.h b/arch/x86/include/asm/spinlock.h index cf87de3fc390..15d1b0a8eff8 100644 --- a/arch/x86/include/asm/spinlock.h +++ b/arch/x86/include/asm/spinlock.h @@ -91,7 +91,7 @@ static __always_inline int arch_spin_value_unlocked(arch_spinlock_t lock) * the queue, and the other indicating the current tail. The lock is acquired * by atomically noting the tail and incrementing it by one (thus adding * ourself to the queue and noting our position), then waiting until the head - * becomes equal to the the initial value of the tail. + * becomes equal to the initial value of the tail. * * We use an xadd covering *both* parts of the lock, to increment the tail and * also load the position of the head, which takes care of memory ordering diff --git a/arch/x86/include/asm/uv/uv_hub.h b/arch/x86/include/asm/uv/uv_hub.h index a00ad8f2a657..3260b75fd427 100644 --- a/arch/x86/include/asm/uv/uv_hub.h +++ b/arch/x86/include/asm/uv/uv_hub.h @@ -512,7 +512,7 @@ static inline int uv_numa_blade_id(void) return uv_hub_info->numa_blade_id; } -/* Convert a cpu number to the the UV blade number */ +/* Convert a cpu number to the UV blade number */ static inline int uv_cpu_to_blade_id(int cpu) { return uv_cpu_to_blade[cpu]; diff --git a/arch/x86/kernel/cpu/perf_event_intel_cqm.c b/arch/x86/kernel/cpu/perf_event_intel_cqm.c index e4d1b8b738fa..e7ef624e4f47 100644 --- a/arch/x86/kernel/cpu/perf_event_intel_cqm.c +++ b/arch/x86/kernel/cpu/perf_event_intel_cqm.c @@ -567,7 +567,7 @@ static bool intel_cqm_rmid_stabilize(unsigned int *available) /* * The rotation RMID gets priority if it's * currently invalid. In which case, skip adding - * the RMID to the the free lru. + * the RMID to the free lru. */ if (!__rmid_valid(intel_cqm_rotation_rmid)) { intel_cqm_rotation_rmid = entry->rmid; diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c index e1a81267f3f6..8ee569ae7bff 100644 --- a/arch/x86/kvm/x86.c +++ b/arch/x86/kvm/x86.c @@ -7446,7 +7446,7 @@ void kvm_arch_destroy_vm(struct kvm *kvm) if (current->mm == kvm->mm) { /* * Free memory regions allocated on behalf of userspace, - * unless the the memory map has changed due to process exit + * unless the memory map has changed due to process exit * or fd copying. */ struct kvm_userspace_memory_region mem; diff --git a/arch/x86/mm/gup.c b/arch/x86/mm/gup.c index 81bf3d2af3eb..5862a503e0fa 100644 --- a/arch/x86/mm/gup.c +++ b/arch/x86/mm/gup.c @@ -288,7 +288,7 @@ int __get_user_pages_fast(unsigned long start, int nr_pages, int write, * * So long as we atomically load page table pointers versus teardown * (which we do on x86, with the above PAE exception), we can follow the - * address down to the the page and take a ref on it. + * address down to the page and take a ref on it. */ local_irq_save(flags); pgdp = pgd_offset(mm, addr); @@ -360,7 +360,7 @@ int get_user_pages_fast(unsigned long start, int nr_pages, int write, * * So long as we atomically load page table pointers versus teardown * (which we do on x86, with the above PAE exception), we can follow the - * address down to the the page and take a ref on it. + * address down to the page and take a ref on it. */ local_irq_disable(); pgdp = pgd_offset(mm, addr); diff --git a/arch/x86/platform/efi/efi_thunk_64.S b/arch/x86/platform/efi/efi_thunk_64.S index ff85d28c50f2..13f24526ccd0 100644 --- a/arch/x86/platform/efi/efi_thunk_64.S +++ b/arch/x86/platform/efi/efi_thunk_64.S @@ -7,7 +7,7 @@ * The below thunking functions are only used after ExitBootServices() * has been called. This simplifies things considerably as compared with * the early EFI thunking because we can leave all the kernel state - * intact (GDT, IDT, etc) and simply invoke the the 32-bit EFI runtime + * intact (GDT, IDT, etc) and simply invoke the 32-bit EFI runtime * services from __KERNEL32_CS. This means we can continue to service * interrupts across an EFI mixed mode call. * diff --git a/arch/x86/xen/setup.c b/arch/x86/xen/setup.c index 55f388ef481a..e0adc53e9645 100644 --- a/arch/x86/xen/setup.c +++ b/arch/x86/xen/setup.c @@ -689,7 +689,7 @@ char * __init xen_memory_setup(void) * - mfn_list * - xen_start_info * See comment above "struct start_info" in - * We tried to make the the memblock_reserve more selective so + * We tried to make the memblock_reserve more selective so * that it would be clear what region is reserved. Sadly we ran * in the problem wherein on a 64-bit hypervisor with a 32-bit * initial domain, the pt_base has the cr3 value which is not diff --git a/arch/xtensa/include/asm/initialize_mmu.h b/arch/xtensa/include/asm/initialize_mmu.h index e256f2270ec9..23f291682f84 100644 --- a/arch/xtensa/include/asm/initialize_mmu.h +++ b/arch/xtensa/include/asm/initialize_mmu.h @@ -6,7 +6,7 @@ * For the new V3 MMU we remap the TLB from virtual == physical * to the standard Linux mapping used in earlier MMU's. * - * The the MMU we also support a new configuration register that + * In the MMU we also support a new configuration register that * specifies how the S32C1I instruction operates with the cache * controller. * diff --git a/arch/xtensa/kernel/entry.S b/arch/xtensa/kernel/entry.S index 82bbfa5a05b3..94044cc958c2 100644 --- a/arch/xtensa/kernel/entry.S +++ b/arch/xtensa/kernel/entry.S @@ -384,7 +384,7 @@ common_exception: /* Save optional registers. */ save_xtregs_opt a1 a2 a4 a5 a6 a7 PT_XTREGS_OPT - + #ifdef CONFIG_TRACE_IRQFLAGS l32i a4, a1, PT_DEPC /* Double exception means we came here with an exception @@ -433,7 +433,7 @@ common_exception_return: * We need to check some flags for signal handling and rescheduling, * and have to restore WB and WS, extra states, and all registers * in the register file that were in use in the user task. - * Note that we don't disable interrupts here. + * Note that we don't disable interrupts here. */ _bbsi.l a4, TIF_NEED_RESCHED, 3f @@ -830,14 +830,14 @@ ENDPROC(unrecoverable_exception) * of the proper size instead. * * This algorithm simply backs out the register changes started by the user - * excpetion handler, makes it appear that we have started a window underflow + * exception handler, makes it appear that we have started a window underflow * by rotating the window back and then setting the old window base (OWB) in * the 'ps' register with the rolled back window base. The 'movsp' instruction * will be re-executed and this time since the next window frames is in the * active AR registers it won't cause an exception. * * If the WindowUnderflow code gets a TLB miss the page will get mapped - * the the partial windeowUnderflow will be handeled in the double exception + * and the partial window underflow will be handled in the double exception * handler. * * Entry condition: @@ -1567,8 +1567,8 @@ ENTRY(fast_second_level_miss) 2: /* Special case for cache aliasing. * We (should) only get here if a clear_user_page, copy_user_page - * or the aliased cache flush functions got preemptively interrupted - * by another task. Re-establish temporary mapping to the + * or the aliased cache flush functions got preemptively interrupted + * by another task. Re-establish temporary mapping to the * TLBTEMP_BASE areas. */ diff --git a/crypto/asymmetric_keys/pkcs7_parser.h b/crypto/asymmetric_keys/pkcs7_parser.h index efc7dc9b8f9c..0e51bec18672 100644 --- a/crypto/asymmetric_keys/pkcs7_parser.h +++ b/crypto/asymmetric_keys/pkcs7_parser.h @@ -40,7 +40,7 @@ struct pkcs7_signed_info { * * This contains the generated digest of _either_ the Content Data or * the Authenticated Attributes [RFC2315 9.3]. If the latter, one of - * the attributes contains the digest of the the Content Data within + * the attributes contains the digest of the Content Data within * it. */ struct public_key_signature sig; diff --git a/drivers/acpi/acpica/accommon.h b/drivers/acpi/acpica/accommon.h index 853aa2dbdb61..898c59164ec6 100644 --- a/drivers/acpi/acpica/accommon.h +++ b/drivers/acpi/acpica/accommon.h @@ -47,7 +47,7 @@ /* * Common set of includes for all ACPICA source files. * We put them here because we don't want to duplicate them - * in the the source code again and again. + * in the source code again and again. * * Note: The order of these include files is important. */ diff --git a/drivers/acpi/acpica/tbfadt.c b/drivers/acpi/acpica/tbfadt.c index 7d2486005e3f..b9b082980926 100644 --- a/drivers/acpi/acpica/tbfadt.c +++ b/drivers/acpi/acpica/tbfadt.c @@ -435,7 +435,7 @@ void acpi_tb_create_local_fadt(struct acpi_table_header *table, u32 length) * The 64-bit X fields are optional extensions to the original 32-bit FADT * V1.0 fields. Even if they are present in the FADT, they are optional and * are unused if the BIOS sets them to zero. Therefore, we must copy/expand - * 32-bit V1.0 fields to the 64-bit X fields if the the 64-bit X field is + * 32-bit V1.0 fields to the 64-bit X fields if the 64-bit X field is * originally zero. * * For ACPI 1.0 FADTs (that contain no 64-bit addresses), all 32-bit address diff --git a/drivers/char/apm-emulation.c b/drivers/char/apm-emulation.c index dd9dfa15e9d1..d086acf9562f 100644 --- a/drivers/char/apm-emulation.c +++ b/drivers/char/apm-emulation.c @@ -563,7 +563,7 @@ static int apm_suspend_notifier(struct notifier_block *nb, wake_up_interruptible(&apm_waitqueue); /* - * Wait for the the suspend_acks_pending variable to drop to + * Wait for the suspend_acks_pending variable to drop to * zero, meaning everybody acked the suspend event (or the * process was killed.) * diff --git a/drivers/char/xilinx_hwicap/fifo_icap.c b/drivers/char/xilinx_hwicap/fifo_icap.c index 02225eb19cf6..619f3a30ec55 100644 --- a/drivers/char/xilinx_hwicap/fifo_icap.c +++ b/drivers/char/xilinx_hwicap/fifo_icap.c @@ -111,7 +111,7 @@ static inline u32 fifo_icap_fifo_read(struct hwicap_drvdata *drvdata) } /** - * fifo_icap_set_read_size - Set the the size register. + * fifo_icap_set_read_size - Set the size register. * @drvdata: a pointer to the drvdata. * @data: the size of the following read transaction, in words. **/ diff --git a/drivers/cpuidle/driver.c b/drivers/cpuidle/driver.c index 5db147859b90..803e5b5536f5 100644 --- a/drivers/cpuidle/driver.c +++ b/drivers/cpuidle/driver.c @@ -167,7 +167,7 @@ static void __cpuidle_driver_init(struct cpuidle_driver *drv) /* * Look for the timer stop flag in the different states, so that we know * if the broadcast timer has to be set up. The loop is in the reverse - * order, because usually one of the deeper states have this flag set. + * order, because usually one of the deeper states has this flag set. */ for (i = drv->state_count - 1; i >= 0 ; i--) { if (drv->states[i].flags & CPUIDLE_FLAG_TIMER_STOP) { diff --git a/drivers/crypto/picoxcell_crypto.c b/drivers/crypto/picoxcell_crypto.c index 5da5b98b8f29..60f2267c1350 100644 --- a/drivers/crypto/picoxcell_crypto.c +++ b/drivers/crypto/picoxcell_crypto.c @@ -53,7 +53,7 @@ #define CMD0_IRQ_THRESHOLD 1 /* - * The timeout period (in jiffies) for a PDU. When the the number of PDUs in + * The timeout period (in jiffies) for a PDU. When the number of PDUs in * flight is greater than the STAT_IRQ_THRESHOLD or 0 the timer is disabled. * When there are packets in flight but lower than the threshold, we enable * the timer and at expiry, attempt to remove any processed packets from the diff --git a/drivers/crypto/ux500/hash/hash_core.c b/drivers/crypto/ux500/hash/hash_core.c index 5f5f360628fc..f7a8f80b40d7 100644 --- a/drivers/crypto/ux500/hash/hash_core.c +++ b/drivers/crypto/ux500/hash/hash_core.c @@ -435,7 +435,7 @@ static int hash_get_device_data(struct hash_ctx *ctx, * @keylen: The lengt of the key. * * Note! This function DOES NOT write to the NBLW registry, even though - * specified in the the hw design spec. Either due to incorrect info in the + * specified in the hw design spec. Either due to incorrect info in the * spec or due to a bug in the hw. */ static void hash_hw_write_key(struct hash_device_data *device_data, diff --git a/drivers/firmware/efi/runtime-wrappers.c b/drivers/firmware/efi/runtime-wrappers.c index 228bbf910461..d028f44916cc 100644 --- a/drivers/firmware/efi/runtime-wrappers.c +++ b/drivers/firmware/efi/runtime-wrappers.c @@ -82,7 +82,7 @@ static DEFINE_SPINLOCK(efi_runtime_lock); * In order to prevent deadlocks under NMI, the wrappers for these functions * may only grab the efi_runtime_lock or rtc_lock spinlocks if !efi_in_nmi(). * However, not all of the services listed are reachable through NMI code paths, - * so the the special handling as suggested by the UEFI spec is only implemented + * so the special handling as suggested by the UEFI spec is only implemented * for QueryVariableInfo() and SetVariable(), as these can be reached in NMI * context through efi_pstore_write(). */ diff --git a/drivers/gpio/gpio-ich.c b/drivers/gpio/gpio-ich.c index 4ba7ed502131..1b6a13e37ffa 100644 --- a/drivers/gpio/gpio-ich.c +++ b/drivers/gpio/gpio-ich.c @@ -477,7 +477,7 @@ static int ichx_gpio_probe(struct platform_device *pdev) /* * If necessary, determine the I/O address of ACPI/power management - * registers which are needed to read the the GPE0 register for GPI pins + * registers which are needed to read the GPE0 register for GPI pins * 0 - 15 on some chipsets. */ if (!ichx_priv.desc->uses_gpe0) diff --git a/drivers/gpio/gpio-sch.c b/drivers/gpio/gpio-sch.c index b72906f5b999..1c24057610c3 100644 --- a/drivers/gpio/gpio-sch.c +++ b/drivers/gpio/gpio-sch.c @@ -131,7 +131,7 @@ static int sch_gpio_direction_out(struct gpio_chip *gc, unsigned gpio_num, /* * according to the datasheet, writing to the level register has no * effect when GPIO is programmed as input. - * Actually the the level register is read-only when configured as input. + * Actually the level register is read-only when configured as input. * Thus presetting the output level before switching to output is _NOT_ possible. * Hence we set the level after configuring the GPIO as output. * But we cannot prevent a short low pulse if direction is set to high diff --git a/drivers/gpu/drm/amd/amdkfd/kfd_device_queue_manager.h b/drivers/gpu/drm/amd/amdkfd/kfd_device_queue_manager.h index 488f51d19427..96e6f204f66c 100644 --- a/drivers/gpu/drm/amd/amdkfd/kfd_device_queue_manager.h +++ b/drivers/gpu/drm/amd/amdkfd/kfd_device_queue_manager.h @@ -64,7 +64,7 @@ struct device_process_node { * * @initialize: Initializes the pipelines and memory module for that device. * - * @start: Initializes the resources/modules the the device needs for queues + * @start: Initializes the resources/modules that the device needs for queues * execution. This function is called on device initialization and after the * system woke up after suspension. * diff --git a/drivers/gpu/drm/drm_crtc.c b/drivers/gpu/drm/drm_crtc.c index b6f076b213bc..92e267558dff 100644 --- a/drivers/gpu/drm/drm_crtc.c +++ b/drivers/gpu/drm/drm_crtc.c @@ -1623,7 +1623,7 @@ EXPORT_SYMBOL(drm_mode_create_dirty_info_property); * drm_mode_create_suggested_offset_properties - create suggests offset properties * @dev: DRM device * - * Create the the suggested x/y offset property for connectors. + * Create the suggested x/y offset property for connectors. */ int drm_mode_create_suggested_offset_properties(struct drm_device *dev) { diff --git a/drivers/gpu/drm/drm_mm.c b/drivers/gpu/drm/drm_mm.c index 1134526286c8..8fbb82448a16 100644 --- a/drivers/gpu/drm/drm_mm.c +++ b/drivers/gpu/drm/drm_mm.c @@ -537,12 +537,12 @@ EXPORT_SYMBOL(drm_mm_replace_node); * * The DRM range allocator supports this use-case through the scanning * interfaces. First a scan operation needs to be initialized with - * drm_mm_init_scan() or drm_mm_init_scan_with_range(). The the driver adds + * drm_mm_init_scan() or drm_mm_init_scan_with_range(). The driver adds * objects to the roaster (probably by walking an LRU list, but this can be * freely implemented) until a suitable hole is found or there's no further * evitable object. * - * The the driver must walk through all objects again in exactly the reverse + * The driver must walk through all objects again in exactly the reverse * order to restore the allocator state. Note that while the allocator is used * in the scan mode no other operation is allowed. * diff --git a/drivers/gpu/drm/i915/i915_gem.c b/drivers/gpu/drm/i915/i915_gem.c index 27ea6bdebce7..085b6edba9ed 100644 --- a/drivers/gpu/drm/i915/i915_gem.c +++ b/drivers/gpu/drm/i915/i915_gem.c @@ -2465,7 +2465,7 @@ int __i915_add_request(struct intel_engine_cs *ring, /* Whilst this request exists, batch_obj will be on the * active_list, and so will hold the active reference. Only when this - * request is retired will the the batch_obj be moved onto the + * request is retired will the batch_obj be moved onto the * inactive_list and lose its active reference. Hence we do not need * to explicitly hold another reference here. */ diff --git a/drivers/gpu/drm/i915/i915_gem_userptr.c b/drivers/gpu/drm/i915/i915_gem_userptr.c index 1719078c763a..9f61665e9cb1 100644 --- a/drivers/gpu/drm/i915/i915_gem_userptr.c +++ b/drivers/gpu/drm/i915/i915_gem_userptr.c @@ -241,7 +241,7 @@ i915_mmu_notifier_add(struct drm_device *dev, * either has cancelled gup work queued and we need to * return back to the user to give time for the gup-workers * to flush their object references upon which the object will - * be removed from the interval-tree, or the the range is + * be removed from the interval-tree, or the range is * still in use by another client and the overlap is invalid. * * If we do have an overlap, we cannot use the interval tree diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c index f75173c20f47..30702cd7a74d 100644 --- a/drivers/gpu/drm/i915/intel_display.c +++ b/drivers/gpu/drm/i915/intel_display.c @@ -2915,7 +2915,7 @@ void intel_finish_reset(struct drm_device *dev) /* * Flips in the rings have been nuked by the reset, * so update the base address of all primary - * planes to the the last fb to make sure we're + * planes to the last fb to make sure we're * showing the correct fb after a reset. */ intel_update_primary_planes(dev); @@ -11170,7 +11170,7 @@ static int __intel_set_mode(struct drm_crtc *crtc, } /* Only after disabling all output pipelines that will be changed can we - * update the the output configuration. */ + * update the output configuration. */ intel_modeset_update_state(dev, prepare_pipes); modeset_update_crtc_power_domains(dev); diff --git a/drivers/gpu/drm/radeon/atombios.h b/drivers/gpu/drm/radeon/atombios.h index 92be50c39ffd..2be3040b28f1 100644 --- a/drivers/gpu/drm/radeon/atombios.h +++ b/drivers/gpu/drm/radeon/atombios.h @@ -2802,8 +2802,8 @@ ucMaxNBVoltageHigh: Voltage regulator dependent PWM value. High 8 bits of t ucMinNBVoltageHigh: Voltage regulator dependent PWM value. High 8 bits of the value for the min voltage.Set this one to 0x00 if VC without PWM or no VC at all. -usInterNBVoltageLow: Voltage regulator dependent PWM value. The value makes the the voltage >=Min NB voltage but <=InterNBVoltageHigh. Set this to 0x0000 if VC without PWM or no VC at all. -usInterNBVoltageHigh: Voltage regulator dependent PWM value. The value makes the the voltage >=InterNBVoltageLow but <=Max NB voltage.Set this to 0x0000 if VC without PWM or no VC at all. +usInterNBVoltageLow: Voltage regulator dependent PWM value. The value makes the voltage >=Min NB voltage but <=InterNBVoltageHigh. Set this to 0x0000 if VC without PWM or no VC at all. +usInterNBVoltageHigh: Voltage regulator dependent PWM value. The value makes the voltage >=InterNBVoltageLow but <=Max NB voltage.Set this to 0x0000 if VC without PWM or no VC at all. */ diff --git a/drivers/gpu/drm/radeon/r300_reg.h b/drivers/gpu/drm/radeon/r300_reg.h index 00c0d2ba22d3..36af5f14f622 100644 --- a/drivers/gpu/drm/radeon/r300_reg.h +++ b/drivers/gpu/drm/radeon/r300_reg.h @@ -353,7 +353,7 @@ # define R300_PVS_CNTL_1_PROGRAM_START_SHIFT 0 # define R300_PVS_CNTL_1_POS_END_SHIFT 10 # define R300_PVS_CNTL_1_PROGRAM_END_SHIFT 20 -/* Addresses are relative the the vertex program parameters area. */ +/* Addresses are relative to the vertex program parameters area. */ #define R300_VAP_PVS_CNTL_2 0x22D4 # define R300_PVS_CNTL_2_PARAM_OFFSET_SHIFT 0 # define R300_PVS_CNTL_2_PARAM_COUNT_SHIFT 16 diff --git a/drivers/gpu/drm/radeon/radeon_device.c b/drivers/gpu/drm/radeon/radeon_device.c index bd7519fdd3f4..fa3512763c50 100644 --- a/drivers/gpu/drm/radeon/radeon_device.c +++ b/drivers/gpu/drm/radeon/radeon_device.c @@ -410,7 +410,7 @@ void radeon_doorbell_get_kfd_info(struct radeon_device *rdev, /* * radeon_wb_*() - * Writeback is the the method by which the the GPU updates special pages + * Writeback is the method by which the GPU updates special pages * in memory with the status of certain GPU events (fences, ring pointers, * etc.). */ diff --git a/drivers/gpu/drm/radeon/radeon_fence.c b/drivers/gpu/drm/radeon/radeon_fence.c index df09ca7c4889..98311ab2b5ba 100644 --- a/drivers/gpu/drm/radeon/radeon_fence.c +++ b/drivers/gpu/drm/radeon/radeon_fence.c @@ -45,7 +45,7 @@ * for GPU/CPU synchronization. When the fence is written, * it is expected that all buffers associated with that fence * are no longer in use by the associated ring on the GPU and - * that the the relevant GPU caches have been flushed. Whether + * that the relevant GPU caches have been flushed. Whether * we use a scratch register or memory location depends on the asic * and whether writeback is enabled. */ diff --git a/drivers/gpu/drm/radeon/radeon_vm.c b/drivers/gpu/drm/radeon/radeon_vm.c index 2a5a4a9e772d..9c987173cd81 100644 --- a/drivers/gpu/drm/radeon/radeon_vm.c +++ b/drivers/gpu/drm/radeon/radeon_vm.c @@ -40,8 +40,8 @@ * can be mapped as snooped (cached system pages) or unsnooped * (uncached system pages). * Each VM has an ID associated with it and there is a page table - * associated with each VMID. When execting a command buffer, - * the kernel tells the the ring what VMID to use for that command + * associated with each VMID. When executing a command buffer, + * the kernel tells the ring what VMID to use for that command * buffer. VMIDs are allocated dynamically as commands are submitted. * The userspace drivers maintain their own address space and the kernel * sets up their pages tables accordingly when they submit their diff --git a/drivers/hv/channel.c b/drivers/hv/channel.c index 2978f5ee8d2a..865ad3093211 100644 --- a/drivers/hv/channel.c +++ b/drivers/hv/channel.c @@ -573,7 +573,7 @@ EXPORT_SYMBOL_GPL(vmbus_close); * vmbus_sendpacket() - Send the specified buffer on the given channel * @channel: Pointer to vmbus_channel structure. * @buffer: Pointer to the buffer you want to receive the data into. - * @bufferlen: Maximum size of what the the buffer will hold + * @bufferlen: Maximum size of what the buffer will hold * @requestid: Identifier of the request * @type: Type of packet that is being send e.g. negotiate, time * packet etc. @@ -794,7 +794,7 @@ EXPORT_SYMBOL_GPL(vmbus_sendpacket_multipagebuffer); * vmbus_recvpacket() - Retrieve the user packet on the specified channel * @channel: Pointer to vmbus_channel structure. * @buffer: Pointer to the buffer you want to receive the data into. - * @bufferlen: Maximum size of what the the buffer will hold + * @bufferlen: Maximum size of what the buffer will hold * @buffer_actual_len: The actual size of the data after it was received * @requestid: Identifier of the request * diff --git a/drivers/hv/vmbus_drv.c b/drivers/hv/vmbus_drv.c index f518b8d7a5b5..f9196aabf890 100644 --- a/drivers/hv/vmbus_drv.c +++ b/drivers/hv/vmbus_drv.c @@ -882,8 +882,8 @@ void vmbus_device_unregister(struct hv_device *device_obj) /* - * VMBUS is an acpi enumerated device. Get the the information we - * need from DSDT. + * VMBUS is an acpi enumerated device. Get the IRQ information + * from DSDT. */ static acpi_status vmbus_walk_resources(struct acpi_resource *res, void *ctx) diff --git a/drivers/hwmon/pmbus/ucd9200.c b/drivers/hwmon/pmbus/ucd9200.c index 033d6aca47d3..d41d7e3bf31c 100644 --- a/drivers/hwmon/pmbus/ucd9200.c +++ b/drivers/hwmon/pmbus/ucd9200.c @@ -117,7 +117,7 @@ static int ucd9200_probe(struct i2c_client *client, * This only affects the READ_IOUT and READ_TEMPERATURE2 registers. * READ_IOUT will return the sum of currents of all phases of a rail, * and READ_TEMPERATURE2 will return the maximum temperature detected - * for the the phases of the rail. + * for the phases of the rail. */ for (i = 0; i < info->pages; i++) { /* diff --git a/drivers/infiniband/hw/ipath/ipath_common.h b/drivers/infiniband/hw/ipath/ipath_common.h index 28cfe97cf1e9..231b54591e2b 100644 --- a/drivers/infiniband/hw/ipath/ipath_common.h +++ b/drivers/infiniband/hw/ipath/ipath_common.h @@ -87,7 +87,7 @@ * These 3 values (SDR and DDR may be ORed for auto-speed * negotiation) are used for the 3rd argument to path_f_set_ib_cfg * with cmd IPATH_IB_CFG_SPD_ENB, by direct calls or via sysfs. They - * are also the the possible values for ipath_link_speed_enabled and active + * are also the possible values for ipath_link_speed_enabled and active * The values were chosen to match values used within the IB spec. */ #define IPATH_IB_SDR 1 diff --git a/drivers/infiniband/hw/qib/qib.h b/drivers/infiniband/hw/qib/qib.h index ffd48bfc4923..43b6e64411d1 100644 --- a/drivers/infiniband/hw/qib/qib.h +++ b/drivers/infiniband/hw/qib/qib.h @@ -333,7 +333,7 @@ struct qib_verbs_txreq { * These 7 values (SDR, DDR, and QDR may be ORed for auto-speed * negotiation) are used for the 3rd argument to path_f_set_ib_cfg * with cmd QIB_IB_CFG_SPD_ENB, by direct calls or via sysfs. They - * are also the the possible values for qib_link_speed_enabled and active + * are also the possible values for qib_link_speed_enabled and active * The values were chosen to match values used within the IB spec. */ #define QIB_IB_SDR 1 diff --git a/drivers/input/mouse/gpio_mouse.c b/drivers/input/mouse/gpio_mouse.c index ced07391304b..a4ab4452e19b 100644 --- a/drivers/input/mouse/gpio_mouse.c +++ b/drivers/input/mouse/gpio_mouse.c @@ -17,7 +17,7 @@ /* * Timer function which is run every scan_ms ms when the device is opened. - * The dev input variable is set to the the input_dev pointer. + * The dev input variable is set to the input_dev pointer. */ static void gpio_mouse_scan(struct input_polled_dev *dev) { diff --git a/drivers/isdn/hardware/mISDN/hfcsusb.c b/drivers/isdn/hardware/mISDN/hfcsusb.c index 114f3bcba1b0..24c15bfb2199 100644 --- a/drivers/isdn/hardware/mISDN/hfcsusb.c +++ b/drivers/isdn/hardware/mISDN/hfcsusb.c @@ -1566,7 +1566,7 @@ reset_hfcsusb(struct hfcsusb *hw) write_reg(hw, HFCUSB_USB_SIZE, (hw->packet_size / 8) | ((hw->packet_size / 8) << 4)); - /* set USB_SIZE_I to match the the wMaxPacketSize for ISO transfers */ + /* set USB_SIZE_I to match the wMaxPacketSize for ISO transfers */ write_reg(hw, HFCUSB_USB_SIZE_I, hw->iso_packet_size); /* enable PCM/GCI master mode */ diff --git a/drivers/lguest/core.c b/drivers/lguest/core.c index 7dc93aa004c8..ff8e9a523b64 100644 --- a/drivers/lguest/core.c +++ b/drivers/lguest/core.c @@ -202,7 +202,7 @@ void __lgwrite(struct lg_cpu *cpu, unsigned long addr, const void *b, /*:*/ /*H:030 - * Let's jump straight to the the main loop which runs the Guest. + * Let's jump straight to the main loop which runs the Guest. * Remember, this is called by the Launcher reading /dev/lguest, and we keep * going around and around until something interesting happens. */ diff --git a/drivers/media/dvb-frontends/tda1002x.h b/drivers/media/dvb-frontends/tda1002x.h index e404b6e44802..ce0fb855c705 100644 --- a/drivers/media/dvb-frontends/tda1002x.h +++ b/drivers/media/dvb-frontends/tda1002x.h @@ -1,6 +1,6 @@ /* TDA10021/TDA10023 - Single Chip Cable Channel Receiver driver module - used on the the Siemens DVB-C cards + used on the Siemens DVB-C cards Copyright (C) 1999 Convergence Integrated Media GmbH Copyright (C) 2004 Markus Schulz diff --git a/drivers/media/dvb-frontends/tda10048.c b/drivers/media/dvb-frontends/tda10048.c index 71fb63299de7..17534ff576ca 100644 --- a/drivers/media/dvb-frontends/tda10048.c +++ b/drivers/media/dvb-frontends/tda10048.c @@ -1134,7 +1134,7 @@ struct dvb_frontend *tda10048_attach(const struct tda10048_config *config, state->pll_pfactor = 0; } - /* Establish any defaults the the user didn't pass */ + /* Establish any defaults the user didn't pass */ tda10048_establish_defaults(&state->frontend); /* Set the xtal and freq defaults */ diff --git a/drivers/media/pci/cx88/cx88-dsp.c b/drivers/media/pci/cx88/cx88-dsp.c index a9907265ff66..1f8820f5f8c0 100644 --- a/drivers/media/pci/cx88/cx88-dsp.c +++ b/drivers/media/pci/cx88/cx88-dsp.c @@ -37,7 +37,7 @@ (compat_remainder(carrier + tone, srate)) / srate * 2 * INT_PI)) /* We calculate the baseband frequencies of the carrier and the pilot tones - * based on the the sampling rate of the audio rds fifo. */ + * based on the sampling rate of the audio rds fifo. */ #define FREQ_A2_CARRIER baseband_freq(54687.5, 2689.36, 0.0) #define FREQ_A2_DUAL baseband_freq(54687.5, 2689.36, 274.1) diff --git a/drivers/media/pci/ivtv/ivtv-yuv.c b/drivers/media/pci/ivtv/ivtv-yuv.c index 2ad65eb29832..00e0818abfc9 100644 --- a/drivers/media/pci/ivtv/ivtv-yuv.c +++ b/drivers/media/pci/ivtv/ivtv-yuv.c @@ -555,7 +555,7 @@ static void ivtv_yuv_handle_vertical(struct ivtv *itv, struct yuv_frame_info *f) reg_2964 = (reg_2964 << 16) + reg_2964 + (reg_2964 * 46 / 94); /* Okay, we've wasted time working out the correct value, - but if we use it, it fouls the the window alignment. + but if we use it, it fouls the window alignment. Fudge it to what we want... */ reg_2964 = 0x00010001 + ((reg_2964 & 0x0000FFFF) - (reg_2964 >> 16)); reg_2968 = 0x00010001 + ((reg_2968 & 0x0000FFFF) - (reg_2968 >> 16)); diff --git a/drivers/media/pci/saa7164/saa7164-core.c b/drivers/media/pci/saa7164/saa7164-core.c index 4b0bec3766ed..100d81e1b770 100644 --- a/drivers/media/pci/saa7164/saa7164-core.c +++ b/drivers/media/pci/saa7164/saa7164-core.c @@ -635,7 +635,7 @@ static irqreturn_t saa7164_irq(int irq, void *dev_id) } /* Check that the hardware is accessible. If the status bytes are - * 0xFF then the device is not accessible, the the IRQ belongs + * 0xFF then the device is not accessible, the IRQ belongs * to another driver. * 4 x u32 interrupt registers. */ diff --git a/drivers/media/platform/davinci/vpbe.c b/drivers/media/platform/davinci/vpbe.c index 9a6c2cc38acb..add8613b4e05 100644 --- a/drivers/media/platform/davinci/vpbe.c +++ b/drivers/media/platform/davinci/vpbe.c @@ -316,7 +316,7 @@ static int vpbe_set_default_output(struct vpbe_device *vpbe_dev) * vpbe_get_output - Get output * @vpbe_dev - vpbe device ptr * - * return current vpbe output to the the index + * return current vpbe output to the index */ static unsigned int vpbe_get_output(struct vpbe_device *vpbe_dev) { diff --git a/drivers/media/platform/exynos4-is/fimc-capture.c b/drivers/media/platform/exynos4-is/fimc-capture.c index 8a2fd8c33d42..d92eb5634d04 100644 --- a/drivers/media/platform/exynos4-is/fimc-capture.c +++ b/drivers/media/platform/exynos4-is/fimc-capture.c @@ -505,7 +505,7 @@ static int fimc_capture_open(struct file *file) if (ret == 0 && vc->user_subdev_api && vc->inh_sensor_ctrls) { /* - * Recreate controls of the the video node to drop + * Recreate controls of the video node to drop * any controls inherited from the sensor subdev. */ fimc_ctrls_delete(vc->ctx); diff --git a/drivers/media/platform/omap3isp/isp.c b/drivers/media/platform/omap3isp/isp.c index deca80903c3a..27b8c49da605 100644 --- a/drivers/media/platform/omap3isp/isp.c +++ b/drivers/media/platform/omap3isp/isp.c @@ -1701,7 +1701,7 @@ void omap3isp_print_status(struct isp_device *isp) * To solve this problem power management support is split into prepare/complete * and suspend/resume operations. The pipelines are stopped in prepare() and the * ISP clocks get disabled in suspend(). Similarly, the clocks are reenabled in - * resume(), and the the pipelines are restarted in complete(). + * resume(), and the pipelines are restarted in complete(). * * TODO: PM dependencies between the ISP and sensors are not modelled explicitly * yet. diff --git a/drivers/media/usb/dvb-usb/friio-fe.c b/drivers/media/usb/dvb-usb/friio-fe.c index d56f927fc31a..b5d2e805380d 100644 --- a/drivers/media/usb/dvb-usb/friio-fe.c +++ b/drivers/media/usb/dvb-usb/friio-fe.c @@ -2,7 +2,7 @@ * * Copyright (C) 2009 Akihiro Tsukada * - * This module is based off the the gl861 and vp702x modules. + * This module is based off the gl861 and vp702x modules. * * This program is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License as published by the Free diff --git a/drivers/media/usb/dvb-usb/friio.c b/drivers/media/usb/dvb-usb/friio.c index 474a17e4db0c..4c7f8fed8046 100644 --- a/drivers/media/usb/dvb-usb/friio.c +++ b/drivers/media/usb/dvb-usb/friio.c @@ -2,7 +2,7 @@ * * Copyright (C) 2009 Akihiro Tsukada * - * This module is based off the the gl861 and vp702x modules. + * This module is based off the gl861 and vp702x modules. * * This program is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License as published by the Free diff --git a/drivers/media/usb/dvb-usb/friio.h b/drivers/media/usb/dvb-usb/friio.h index 0f461ca10cb9..82d19dcdebc0 100644 --- a/drivers/media/usb/dvb-usb/friio.h +++ b/drivers/media/usb/dvb-usb/friio.h @@ -2,7 +2,7 @@ * * Copyright (C) 2009 Akihiro Tsukada * - * This module is based off the the gl861 and vp702x modules. + * This module is based off the gl861 and vp702x modules. * * This program is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License as published by the Free diff --git a/drivers/media/usb/gspca/finepix.c b/drivers/media/usb/gspca/finepix.c index 52bdb569760b..414c1b752911 100644 --- a/drivers/media/usb/gspca/finepix.c +++ b/drivers/media/usb/gspca/finepix.c @@ -143,7 +143,7 @@ again: * for, then it's the end of the * frame. Sometimes the jpeg is not complete, * but there's nothing we can do. We also end - * here if the the jpeg ends right at the end + * here if the jpeg ends right at the end * of the frame. */ gspca_frame_add(gspca_dev, LAST_PACKET, data, len); diff --git a/drivers/media/usb/tm6000/tm6000-cards.c b/drivers/media/usb/tm6000/tm6000-cards.c index 2e8c3afe4ec4..b7b5a1f630af 100644 --- a/drivers/media/usb/tm6000/tm6000-cards.c +++ b/drivers/media/usb/tm6000/tm6000-cards.c @@ -1313,7 +1313,7 @@ static int tm6000_usb_probe(struct usb_interface *interface, le16_to_cpu(dev->udev->descriptor.idProduct), interface->altsetting->desc.bInterfaceNumber); -/* check if the the device has the iso in endpoint at the correct place */ +/* check if the device has the iso in endpoint at the correct place */ if (!dev->isoc_in.endp) { printk(KERN_ERR "tm6000: probing error: no IN ISOC endpoint!\n"); rc = -ENODEV; diff --git a/drivers/media/usb/uvc/uvc_video.c b/drivers/media/usb/uvc/uvc_video.c index 20ccc9d315dc..9ababe952b56 100644 --- a/drivers/media/usb/uvc/uvc_video.c +++ b/drivers/media/usb/uvc/uvc_video.c @@ -1000,7 +1000,7 @@ static int uvc_video_decode_start(struct uvc_streaming *stream, } /* Synchronize to the input stream by waiting for the FID bit to be - * toggled when the the buffer state is not UVC_BUF_STATE_ACTIVE. + * toggled when the buffer state is not UVC_BUF_STATE_ACTIVE. * stream->last_fid is initialized to -1, so the first isochronous * frame will always be in sync. * diff --git a/drivers/media/v4l2-core/v4l2-ioctl.c b/drivers/media/v4l2-core/v4l2-ioctl.c index b08407225db1..2c8ce861e6ea 100644 --- a/drivers/media/v4l2-core/v4l2-ioctl.c +++ b/drivers/media/v4l2-core/v4l2-ioctl.c @@ -984,7 +984,7 @@ static void v4l_sanitize_format(struct v4l2_format *fmt) /* * The v4l2_pix_format structure has been extended with fields that were * not previously required to be set to zero by applications. The priv - * field, when set to a magic value, indicates the the extended fields + * field, when set to a magic value, indicates that the extended fields * are valid. Otherwise they will contain undefined values. To simplify * the API towards drivers zero the extended fields and set the priv * field to the magic value when the extended pixel format structure diff --git a/drivers/memory/emif.c b/drivers/memory/emif.c index 04644e7b42b1..303b322756c7 100644 --- a/drivers/memory/emif.c +++ b/drivers/memory/emif.c @@ -373,7 +373,7 @@ static const struct lpddr2_addressing *get_addressing_table( } /* - * Find the the right timing table from the array of timing + * Find the right timing table from the array of timing * tables of the device using DDR clock frequency */ static const struct lpddr2_timings *get_timings_table(struct emif_data *emif, diff --git a/drivers/message/fusion/mptspi.c b/drivers/message/fusion/mptspi.c index 613231c16194..4591bd235a00 100644 --- a/drivers/message/fusion/mptspi.c +++ b/drivers/message/fusion/mptspi.c @@ -101,7 +101,7 @@ static u8 mptspiInternalCtx = MPT_MAX_PROTOCOL_DRIVERS; /* Used only for interna * @target: per target private data * @sdev: SCSI device * - * Update the target negotiation parameters based on the the Inquiry + * Update the target negotiation parameters based on the Inquiry * data, adapter capabilities, and NVRAM settings. **/ static void diff --git a/drivers/mfd/db8500-prcmu.c b/drivers/mfd/db8500-prcmu.c index cc1a404328c2..69f256d6a3ed 100644 --- a/drivers/mfd/db8500-prcmu.c +++ b/drivers/mfd/db8500-prcmu.c @@ -889,7 +889,7 @@ void db8500_prcmu_get_abb_event_buffer(void __iomem **buf) * @opp: The new ARM operating point to which transition is to be made * Returns: 0 on success, non-zero on failure * - * This function sets the the operating point of the ARM. + * This function sets the operating point of the ARM. */ int db8500_prcmu_set_arm_opp(u8 opp) { diff --git a/drivers/misc/mic/bus/mic_bus.c b/drivers/misc/mic/bus/mic_bus.c index 961ae90aae47..1b15af8c5101 100644 --- a/drivers/misc/mic/bus/mic_bus.c +++ b/drivers/misc/mic/bus/mic_bus.c @@ -17,7 +17,7 @@ * * Intel MIC Bus driver. * - * This implementation is very similar to the the virtio bus driver + * This implementation is very similar to the virtio bus driver * implementation @ drivers/virtio/virtio.c */ #include diff --git a/drivers/misc/sgi-gru/grukservices.c b/drivers/misc/sgi-gru/grukservices.c index 913de07e577c..6482a9c4eb44 100644 --- a/drivers/misc/sgi-gru/grukservices.c +++ b/drivers/misc/sgi-gru/grukservices.c @@ -48,7 +48,7 @@ * kernel/user requirements. * * Blade percpu resources reserved for kernel use. These resources are - * reserved whenever the the kernel context for the blade is loaded. Note + * reserved whenever the kernel context for the blade is loaded. Note * that the kernel context is not guaranteed to be always available. It is * loaded on demand & can be stolen by a user if the user demand exceeds the * kernel demand. The kernel can always reload the kernel context but diff --git a/drivers/misc/sgi-xp/xpc_uv.c b/drivers/misc/sgi-xp/xpc_uv.c index 95c894482fdd..f87520cfb787 100644 --- a/drivers/misc/sgi-xp/xpc_uv.c +++ b/drivers/misc/sgi-xp/xpc_uv.c @@ -1594,7 +1594,7 @@ out_2: * by xpc_notify_senders_of_disconnect_uv(), and to also get an * error returned here will confuse them. Additionally, since * in this case the channel is being disconnected we don't need - * to put the the msg_slot back on the free list. + * to put the msg_slot back on the free list. */ if (cmpxchg(&msg_slot->func, func, NULL) != func) { ret = xpSuccess; diff --git a/drivers/mmc/host/dw_mmc.c b/drivers/mmc/host/dw_mmc.c index 38b29265cc7c..be08822335d5 100644 --- a/drivers/mmc/host/dw_mmc.c +++ b/drivers/mmc/host/dw_mmc.c @@ -1032,7 +1032,7 @@ static void __dw_mci_start_request(struct dw_mci *host, * is just about to roll over. * * We do this whole thing under spinlock and only if the - * command hasn't already completed (indicating the the irq + * command hasn't already completed (indicating that the irq * already ran so we don't want the timeout). */ spin_lock_irqsave(&host->irq_lock, irqflags); diff --git a/drivers/mtd/nand/gpmi-nand/gpmi-nand.c b/drivers/mtd/nand/gpmi-nand/gpmi-nand.c index 33f3c3c54dbc..6429d9cc6aa1 100644 --- a/drivers/mtd/nand/gpmi-nand/gpmi-nand.c +++ b/drivers/mtd/nand/gpmi-nand/gpmi-nand.c @@ -946,7 +946,7 @@ static uint8_t gpmi_read_byte(struct mtd_info *mtd) /* * Handles block mark swapping. * It can be called in swapping the block mark, or swapping it back, - * because the the operations are the same. + * because the operations are the same. */ static void block_mark_swapping(struct gpmi_nand_data *this, void *payload, void *auxiliary) diff --git a/drivers/mtd/ubi/ubi.h b/drivers/mtd/ubi/ubi.h index c998212fc680..ac6426820b53 100644 --- a/drivers/mtd/ubi/ubi.h +++ b/drivers/mtd/ubi/ubi.h @@ -264,7 +264,7 @@ struct ubi_fm_pool { /** * struct ubi_volume - UBI volume description data structure. - * @dev: device object to make use of the the Linux device model + * @dev: device object to make use of the Linux device model * @cdev: character device object to create character device * @ubi: reference to the UBI device description object * @vol_id: volume ID @@ -413,7 +413,7 @@ struct ubi_debug_info { /** * struct ubi_device - UBI device description structure - * @dev: UBI device object to use the the Linux device model + * @dev: UBI device object to use for the Linux device model * @cdev: character device object to create character device * @ubi_num: UBI device number * @ubi_name: UBI device name diff --git a/drivers/mtd/ubi/wl.c b/drivers/mtd/ubi/wl.c index 16214d3d57a4..5db925061538 100644 --- a/drivers/mtd/ubi/wl.c +++ b/drivers/mtd/ubi/wl.c @@ -429,7 +429,7 @@ static int prot_queue_del(struct ubi_device *ubi, int pnum) /** * sync_erase - synchronously erase a physical eraseblock. * @ubi: UBI device description object - * @e: the the physical eraseblock to erase + * @e: the physical eraseblock to erase * @torture: if the physical eraseblock has to be tortured * * This function returns zero in case of success and a negative error code in diff --git a/drivers/net/can/xilinx_can.c b/drivers/net/can/xilinx_can.c index 6bddfe062b51..4da461614f82 100644 --- a/drivers/net/can/xilinx_can.c +++ b/drivers/net/can/xilinx_can.c @@ -533,7 +533,7 @@ static int xcan_rx(struct net_device *ndev) * @isr: interrupt status register value * * This is the CAN error interrupt and it will - * check the the type of error and forward the error + * check the type of error and forward the error * frame to upper layers. */ static void xcan_err_interrupt(struct net_device *ndev, u32 isr) diff --git a/drivers/net/ethernet/agere/et131x.c b/drivers/net/ethernet/agere/et131x.c index e0f3d197e7f2..e02ffda21bce 100644 --- a/drivers/net/ethernet/agere/et131x.c +++ b/drivers/net/ethernet/agere/et131x.c @@ -1109,7 +1109,7 @@ static void et1310_config_rxmac_regs(struct et131x_adapter *adapter) writel(0, &rxmac->mif_ctrl); writel(0, &rxmac->space_avail); - /* Initialize the the mif_ctrl register + /* Initialize the mif_ctrl register * bit 3: Receive code error. One or more nibbles were signaled as * errors during the reception of the packet. Clear this * bit in Gigabit, set it in 100Mbit. This was derived diff --git a/drivers/net/ethernet/calxeda/xgmac.c b/drivers/net/ethernet/calxeda/xgmac.c index 63efa0dc45ba..1c29e795b320 100644 --- a/drivers/net/ethernet/calxeda/xgmac.c +++ b/drivers/net/ethernet/calxeda/xgmac.c @@ -1234,7 +1234,7 @@ static int xgmac_rx(struct xgmac_priv *priv, int limit) * @budget : maximum number of packets that the current CPU can receive from * all interfaces. * Description : - * This function implements the the reception process. + * This function implements the reception process. * Also it runs the TX completion thread */ static int xgmac_poll(struct napi_struct *napi, int budget) diff --git a/drivers/net/ethernet/emulex/benet/be_main.c b/drivers/net/ethernet/emulex/benet/be_main.c index fb0bc3c3620e..0ce057fa573f 100644 --- a/drivers/net/ethernet/emulex/benet/be_main.c +++ b/drivers/net/ethernet/emulex/benet/be_main.c @@ -2575,7 +2575,7 @@ static irqreturn_t be_intx(int irq, void *dev) } be_eq_notify(adapter, eqo->q.id, false, true, num_evts); - /* Return IRQ_HANDLED only for the the first spurious intr + /* Return IRQ_HANDLED only for the first spurious intr * after a valid intr to stop the kernel from branding * this irq as a bad one! */ diff --git a/drivers/net/ethernet/fujitsu/Kconfig b/drivers/net/ethernet/fujitsu/Kconfig index 1085257385d2..7063fa533732 100644 --- a/drivers/net/ethernet/fujitsu/Kconfig +++ b/drivers/net/ethernet/fujitsu/Kconfig @@ -12,7 +12,7 @@ config NET_VENDOR_FUJITSU . Note that the answer to this question doesn't directly affect the - the questions about Fujitsu cards. If you say Y, you will be asked for + questions about Fujitsu cards. If you say Y, you will be asked for your specific card in the following questions. if NET_VENDOR_FUJITSU diff --git a/drivers/net/ethernet/intel/e1000/e1000_hw.c b/drivers/net/ethernet/intel/e1000/e1000_hw.c index 45c8c864104e..960e5fa4fb7b 100644 --- a/drivers/net/ethernet/intel/e1000/e1000_hw.c +++ b/drivers/net/ethernet/intel/e1000/e1000_hw.c @@ -3986,7 +3986,7 @@ static s32 e1000_do_read_eeprom(struct e1000_hw *hw, u16 offset, u16 words, * @hw: Struct containing variables accessed by shared code * * Reads the first 64 16 bit words of the EEPROM and sums the values read. - * If the the sum of the 64 16 bit words is 0xBABA, the EEPROM's checksum is + * If the sum of the 64 16 bit words is 0xBABA, the EEPROM's checksum is * valid. */ s32 e1000_validate_eeprom_checksum(struct e1000_hw *hw) diff --git a/drivers/net/ethernet/intel/e1000e/ich8lan.c b/drivers/net/ethernet/intel/e1000e/ich8lan.c index 9d81c0317433..7b96336f5771 100644 --- a/drivers/net/ethernet/intel/e1000e/ich8lan.c +++ b/drivers/net/ethernet/intel/e1000e/ich8lan.c @@ -4493,7 +4493,7 @@ static s32 e1000_id_led_init_pchlan(struct e1000_hw *hw) * @hw: pointer to the HW structure * * ICH8 use the PCI Express bus, but does not contain a PCI Express Capability - * register, so the the bus width is hard coded. + * register, so the bus width is hard coded. **/ static s32 e1000_get_bus_info_ich8lan(struct e1000_hw *hw) { diff --git a/drivers/net/ethernet/intel/fm10k/fm10k_mbx.c b/drivers/net/ethernet/intel/fm10k/fm10k_mbx.c index 1b2738380518..9c5e3a334724 100644 --- a/drivers/net/ethernet/intel/fm10k/fm10k_mbx.c +++ b/drivers/net/ethernet/intel/fm10k/fm10k_mbx.c @@ -820,7 +820,7 @@ static s32 fm10k_mbx_read(struct fm10k_hw *hw, struct fm10k_mbx_info *mbx) * @hw: pointer to hardware structure * @mbx: pointer to mailbox * - * This function copies the message from the the message array to mbmem + * This function copies the message from the message array to mbmem **/ static void fm10k_mbx_write(struct fm10k_hw *hw, struct fm10k_mbx_info *mbx) { diff --git a/drivers/net/ethernet/intel/igb/e1000_82575.c b/drivers/net/ethernet/intel/igb/e1000_82575.c index 0f69ef81751a..b8c3e7880e23 100644 --- a/drivers/net/ethernet/intel/igb/e1000_82575.c +++ b/drivers/net/ethernet/intel/igb/e1000_82575.c @@ -2166,7 +2166,7 @@ out: * igb_reset_mdicnfg_82580 - Reset MDICNFG destination and com_mdio bits * @hw: pointer to the HW structure * - * This resets the the MDICNFG.Destination and MDICNFG.Com_MDIO bits based on + * This resets the MDICNFG.Destination and MDICNFG.Com_MDIO bits based on * the values found in the EEPROM. This addresses an issue in which these * bits are not restored from EEPROM after reset. **/ diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c index d3f4b0ceb3f7..0ce0c83246a7 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c @@ -245,7 +245,7 @@ static void ixgbe_check_minimum_link(struct ixgbe_adapter *adapter, enum pcie_link_width width = PCIE_LNK_WIDTH_UNKNOWN; struct pci_dev *pdev; - /* determine whether to use the the parent device + /* determine whether to use the parent device */ if (ixgbe_pcie_from_parent(&adapter->hw)) pdev = adapter->pdev->bus->parent->self; diff --git a/drivers/net/ethernet/neterion/s2io.c b/drivers/net/ethernet/neterion/s2io.c index 1e0f72b65459..9670e6257b1f 100644 --- a/drivers/net/ethernet/neterion/s2io.c +++ b/drivers/net/ethernet/neterion/s2io.c @@ -2158,7 +2158,7 @@ static int verify_xena_quiescence(struct s2io_nic *sp) /* * In PCI 33 mode, the P_PLL is not used, and therefore, - * the the P_PLL_LOCK bit in the adapter_status register will + * the P_PLL_LOCK bit in the adapter_status register will * not be asserted. */ if (!(val64 & ADAPTER_STATUS_P_PLL_LOCK) && diff --git a/drivers/net/ethernet/rdc/Kconfig b/drivers/net/ethernet/rdc/Kconfig index 2055f7eb2ba9..ca81037ab80c 100644 --- a/drivers/net/ethernet/rdc/Kconfig +++ b/drivers/net/ethernet/rdc/Kconfig @@ -26,7 +26,7 @@ config R6040 select PHYLIB ---help--- This is a driver for the R6040 Fast Ethernet MACs found in the - the RDC R-321x System-on-chips. + RDC R-321x System-on-chips. To compile this driver as a module, choose M here: the module will be called r6040. This is recommended. diff --git a/drivers/net/ethernet/xilinx/xilinx_axienet_mdio.c b/drivers/net/ethernet/xilinx/xilinx_axienet_mdio.c index 3b67d60d4378..b8da6e89059a 100644 --- a/drivers/net/ethernet/xilinx/xilinx_axienet_mdio.c +++ b/drivers/net/ethernet/xilinx/xilinx_axienet_mdio.c @@ -83,7 +83,7 @@ static int axienet_mdio_read(struct mii_bus *bus, int phy_id, int reg) * returns: 0 on success, -ETIMEDOUT on a timeout * * Writes the value to the requested register by first writing the value - * into MWD register. The the MCR register is then appropriately setup + * into MWD register. The MCR register is then appropriately setup * to finish the write operation. */ static int axienet_mdio_write(struct mii_bus *bus, int phy_id, int reg, diff --git a/drivers/net/wimax/i2400m/i2400m.h b/drivers/net/wimax/i2400m/i2400m.h index 5a34e72bab9a..6113a29f01bc 100644 --- a/drivers/net/wimax/i2400m/i2400m.h +++ b/drivers/net/wimax/i2400m/i2400m.h @@ -250,14 +250,14 @@ struct i2400m_barker_db; * * @bus_setup: [optional fill] Function called by the bus-generic code * [i2400m_setup()] to setup the basic bus-specific communications - * to the the device needed to load firmware. See LIFE CYCLE above. + * to the device needed to load firmware. See LIFE CYCLE above. * * NOTE: Doesn't need to upload the firmware, as that is taken * care of by the bus-generic code. * * @bus_release: [optional fill] Function called by the bus-generic * code [i2400m_release()] to shutdown the basic bus-specific - * communications to the the device needed to load firmware. See + * communications to the device needed to load firmware. See * LIFE CYCLE above. * * This function does not need to reset the device, just tear down diff --git a/drivers/net/wimax/i2400m/rx.c b/drivers/net/wimax/i2400m/rx.c index 0b602951ff6b..4466ee71d1e4 100644 --- a/drivers/net/wimax/i2400m/rx.c +++ b/drivers/net/wimax/i2400m/rx.c @@ -693,7 +693,7 @@ void __i2400m_roq_queue(struct i2400m *i2400m, struct i2400m_roq *roq, * right spot where to insert the packet; we know the queue is * not empty, so we are not the first ones; we also know we * are not going to be the last ones. The list is sorted, so - * we have to insert before the the first guy with an nsn_itr + * we have to insert before the first guy with an nsn_itr * greater that our nsn. */ skb_queue_walk(&roq->queue, skb_itr) { roq_data_itr = (struct i2400m_roq_data *) &skb_itr->cb; diff --git a/drivers/net/wimax/i2400m/tx.c b/drivers/net/wimax/i2400m/tx.c index f20886ade1cc..1f7b2b922fae 100644 --- a/drivers/net/wimax/i2400m/tx.c +++ b/drivers/net/wimax/i2400m/tx.c @@ -233,7 +233,7 @@ * i2400m_tx_skip_tail() Marks unusable FIFO tail space * i2400m->bus_tx_kick() * - * Now i2400m->bus_tx_kick() is the the bus-specific driver backend + * Now i2400m->bus_tx_kick() is the bus-specific driver backend * implementation; that would do: * * i2400m->bus_tx_kick() diff --git a/drivers/net/wireless/ath/ath10k/rx_desc.h b/drivers/net/wireless/ath/ath10k/rx_desc.h index e9cc7787bf5f..fab813d0d6cb 100644 --- a/drivers/net/wireless/ath/ath10k/rx_desc.h +++ b/drivers/net/wireless/ath/ath10k/rx_desc.h @@ -77,7 +77,7 @@ struct rx_attention { * first_msdu is set. * * peer_idx_invalid - * Indicates no matching entries within the the max search + * Indicates no matching entries within the max search * count. Only set when first_msdu is set. * * peer_idx_timeout diff --git a/drivers/net/wireless/ath/ath6kl/hif.h b/drivers/net/wireless/ath/ath6kl/hif.h index dc6bd8cd9b83..e32154fe1732 100644 --- a/drivers/net/wireless/ath/ath6kl/hif.h +++ b/drivers/net/wireless/ath/ath6kl/hif.h @@ -98,7 +98,7 @@ struct bus_request { * emode - This indicates the whether the command is to be executed in a * blocking or non-blocking fashion (HIF_SYNCHRONOUS/ * HIF_ASYNCHRONOUS). The read/write data paths in HTC have been - * implemented using the asynchronous mode allowing the the bus + * implemented using the asynchronous mode allowing the bus * driver to indicate the completion of operation through the * registered callback routine. The requirement primarily comes * from the contexts these operations get called from (a driver's diff --git a/drivers/net/wireless/ath/ath6kl/sdio.c b/drivers/net/wireless/ath/ath6kl/sdio.c index eab0ab976af2..9963faaa465f 100644 --- a/drivers/net/wireless/ath/ath6kl/sdio.c +++ b/drivers/net/wireless/ath/ath6kl/sdio.c @@ -1173,7 +1173,7 @@ static int ath6kl_sdio_bmi_read(struct ath6kl *ar, u8 *buf, u32 len) * Wait for first 4 bytes to be in FIFO * If CONSERVATIVE_BMI_READ is enabled, also wait for * a BMI command credit, which indicates that the ENTIRE - * response is available in the the FIFO + * response is available in the FIFO * * CASE 3: length > 128 * Wait for the first 4 bytes to be in FIFO diff --git a/drivers/net/wireless/ath/ath9k/ar9002_phy.c b/drivers/net/wireless/ath/ath9k/ar9002_phy.c index fc08162b5820..68a96e3a0044 100644 --- a/drivers/net/wireless/ath/ath9k/ar9002_phy.c +++ b/drivers/net/wireless/ath/ath9k/ar9002_phy.c @@ -638,7 +638,7 @@ static void ar9002_hw_spectral_scan_config(struct ath_hw *ah, REG_CLR_BIT(ah, AR_PHY_SPECTRAL_SCAN, AR_PHY_SPECTRAL_SCAN_SHORT_REPEAT); - /* on AR92xx, the highest bit of count will make the the chip send + /* on AR92xx, the highest bit of count will make the chip send * spectral samples endlessly. Check if this really was intended, * and fix otherwise. */ diff --git a/drivers/net/wireless/ath/ath9k/ar9003_phy.c b/drivers/net/wireless/ath/ath9k/ar9003_phy.c index 1ad66b76749b..c559e7576141 100644 --- a/drivers/net/wireless/ath/ath9k/ar9003_phy.c +++ b/drivers/net/wireless/ath/ath9k/ar9003_phy.c @@ -1766,7 +1766,7 @@ static void ar9003_hw_spectral_scan_config(struct ath_hw *ah, REG_SET_BIT(ah, AR_PHY_RADAR_0, AR_PHY_RADAR_0_FFT_ENA); REG_SET_BIT(ah, AR_PHY_SPECTRAL_SCAN, AR_PHY_SPECTRAL_SCAN_ENABLE); - /* on AR93xx and newer, count = 0 will make the the chip send + /* on AR93xx and newer, count = 0 will make the chip send * spectral samples endlessly. Check if this really was intended, * and fix otherwise. */ diff --git a/drivers/net/wireless/ath/wcn36xx/hal.h b/drivers/net/wireless/ath/wcn36xx/hal.h index a1f1127d7808..24cce9db3ce0 100644 --- a/drivers/net/wireless/ath/wcn36xx/hal.h +++ b/drivers/net/wireless/ath/wcn36xx/hal.h @@ -1609,7 +1609,7 @@ struct wcn36xx_hal_config_bss_params { /* HAL should update the existing BSS entry, if this flag is set. * UMAC will set this flag in case of reassoc, where we want to - * resue the the old BSSID and still return success 0 = Add, 1 = + * reuse the old BSSID and still return success 0 = Add, 1 = * Update */ u8 action; @@ -1746,7 +1746,7 @@ struct wcn36xx_hal_config_bss_params_v1 { /* HAL should update the existing BSS entry, if this flag is set. * UMAC will set this flag in case of reassoc, where we want to - * resue the the old BSSID and still return success 0 = Add, 1 = + * reuse the old BSSID and still return success 0 = Add, 1 = * Update */ u8 action; @@ -3736,10 +3736,10 @@ struct wcn36xx_hal_dump_cmd_rsp_msg { /* success or failure */ u32 status; - /* Length of the responce message */ + /* Length of the response message */ u32 rsp_length; - /* FIXME: Currently considering the the responce will be less than + /* FIXME: Currently considering that the response will be less than * 100bytes */ u8 rsp_buffer[DUMPCMD_RSP_BUFFER]; } __packed; diff --git a/drivers/net/wireless/brcm80211/brcmsmac/main.c b/drivers/net/wireless/brcm80211/brcmsmac/main.c index 369527e27689..d5132651847e 100644 --- a/drivers/net/wireless/brcm80211/brcmsmac/main.c +++ b/drivers/net/wireless/brcm80211/brcmsmac/main.c @@ -3818,7 +3818,7 @@ static void brcms_b_set_shortslot(struct brcms_hardware *wlc_hw, bool shortslot) } /* - * Suspend the the MAC and update the slot timing + * Suspend the MAC and update the slot timing * for standard 11b/g (20us slots) or shortslot 11g (9us slots). */ static void brcms_c_switch_shortslot(struct brcms_c_info *wlc, bool shortslot) diff --git a/drivers/net/wireless/iwlwifi/mvm/fw-api-tx.h b/drivers/net/wireless/iwlwifi/mvm/fw-api-tx.h index 81c4ea3c6958..be4f3ade1ae8 100644 --- a/drivers/net/wireless/iwlwifi/mvm/fw-api-tx.h +++ b/drivers/net/wireless/iwlwifi/mvm/fw-api-tx.h @@ -191,7 +191,7 @@ enum iwl_tx_flags { * cleared. Combination of RATE_MCS_* * @sta_id: index of destination station in FW station table * @sec_ctl: security control, TX_CMD_SEC_* - * @initial_rate_index: index into the the rate table for initial TX attempt. + * @initial_rate_index: index into the rate table for initial TX attempt. * Applied if TX_CMD_FLG_STA_RATE_MSK is set, normally 0 for data frames. * @key: security key * @next_frame_flags: TX_CMD_SEC_* and TX_CMD_NEXT_FRAME_* @@ -554,7 +554,7 @@ struct iwl_extended_beacon_notif { /** * enum iwl_dump_control - dump (flush) control flags - * @DUMP_TX_FIFO_FLUSH: Dump MSDUs until the the FIFO is empty + * @DUMP_TX_FIFO_FLUSH: Dump MSDUs until the FIFO is empty * and the TFD queues are empty. */ enum iwl_dump_control { diff --git a/drivers/net/wireless/iwlwifi/mvm/phy-ctxt.c b/drivers/net/wireless/iwlwifi/mvm/phy-ctxt.c index e68a475e3071..56a34ac65cbe 100644 --- a/drivers/net/wireless/iwlwifi/mvm/phy-ctxt.c +++ b/drivers/net/wireless/iwlwifi/mvm/phy-ctxt.c @@ -88,7 +88,7 @@ u8 iwl_mvm_get_channel_width(struct cfg80211_chan_def *chandef) /* * Maps the driver specific control channel position (relative to the center - * freq) definitions to the the fw values + * freq) definitions to the fw values */ u8 iwl_mvm_get_ctrl_pos(struct cfg80211_chan_def *chandef) { diff --git a/drivers/net/wireless/mwifiex/debugfs.c b/drivers/net/wireless/mwifiex/debugfs.c index 1fb329dc6744..8462076cf744 100644 --- a/drivers/net/wireless/mwifiex/debugfs.c +++ b/drivers/net/wireless/mwifiex/debugfs.c @@ -157,7 +157,7 @@ free_and_exit: * This function is called when the 'fw_dump' file is opened for * reading. * This function dumps firmware memory in different files - * (ex. DTCM, ITCM, SQRAM etc.) based on the the segments for + * (ex. DTCM, ITCM, SQRAM etc.) based on the segments for * debugging. */ static ssize_t diff --git a/drivers/net/wireless/mwifiex/sdio.c b/drivers/net/wireless/mwifiex/sdio.c index d10320f89bc1..7dda52bfdaff 100644 --- a/drivers/net/wireless/mwifiex/sdio.c +++ b/drivers/net/wireless/mwifiex/sdio.c @@ -1044,7 +1044,7 @@ static int mwifiex_check_fw_status(struct mwifiex_adapter *adapter, /* * This function decode sdio aggreation pkt. * - * Based on the the data block size and pkt_len, + * Based on the data block size and pkt_len, * skb data will be decoded to few packets. */ static void mwifiex_deaggr_sdio_pkt(struct mwifiex_adapter *adapter, diff --git a/drivers/net/wireless/rsi/rsi_91x_sdio.c b/drivers/net/wireless/rsi/rsi_91x_sdio.c index 8428858204a6..e1f05ad89d9e 100644 --- a/drivers/net/wireless/rsi/rsi_91x_sdio.c +++ b/drivers/net/wireless/rsi/rsi_91x_sdio.c @@ -596,7 +596,7 @@ static int rsi_sdio_host_intf_write_pkt(struct rsi_hw *adapter, * rsi_sdio_host_intf_read_pkt() - This function reads the packet from the device. * @adapter: Pointer to the adapter data structure. - * @pkt: Pointer to the packet data to be read from the the device. + * @pkt: Pointer to the packet data to be read from the device. * @length: Length of the data to be read from the device. * * Return: 0 on success, -1 on failure. @@ -627,7 +627,7 @@ int rsi_sdio_host_intf_read_pkt(struct rsi_hw *adapter, * rsi_init_sdio_interface() - This function does init specific to SDIO. * * @adapter: Pointer to the adapter data structure. - * @pkt: Pointer to the packet data to be read from the the device. + * @pkt: Pointer to the packet data to be read from the device. * * Return: 0 on success, -1 on failure. */ diff --git a/drivers/net/wireless/ti/wl1251/acx.h b/drivers/net/wireless/ti/wl1251/acx.h index 2bdec38699f4..bfe998947957 100644 --- a/drivers/net/wireless/ti/wl1251/acx.h +++ b/drivers/net/wireless/ti/wl1251/acx.h @@ -1243,7 +1243,7 @@ struct wl1251_acx_arp_filter { u8 address[16]; /* The IP address used to filter ARP packets. ARP packets that do not match this address are dropped. When the IP Version is 4, the last 12 - bytes of the the address are ignored. */ + bytes of the address are ignored. */ } __attribute__((packed)); struct wl1251_acx_ac_cfg { diff --git a/drivers/pci/hotplug/acpiphp_glue.c b/drivers/pci/hotplug/acpiphp_glue.c index bcb90e4888dd..c1dc11893cea 100644 --- a/drivers/pci/hotplug/acpiphp_glue.c +++ b/drivers/pci/hotplug/acpiphp_glue.c @@ -36,7 +36,7 @@ * when the bridge is scanned and it loses a refcount when the bridge * is removed. * - When a P2P bridge is present, we elevate the refcount on the subordinate - * bus. It loses the refcount when the the driver unloads. + * bus. It loses the refcount when the driver unloads. */ #define pr_fmt(fmt) "acpiphp_glue: " fmt diff --git a/drivers/pcmcia/pxa2xx_hx4700.c b/drivers/pcmcia/pxa2xx_hx4700.c index 7dfef3ee5b53..40511e39cea5 100644 --- a/drivers/pcmcia/pxa2xx_hx4700.c +++ b/drivers/pcmcia/pxa2xx_hx4700.c @@ -33,7 +33,7 @@ static int hx4700_pcmcia_hw_init(struct soc_pcmcia_socket *skt) /* * IRQ type must be set before soc_pcmcia_hw_init() calls request_irq(). * The asic3 default IRQ type is level trigger low level detect, exactly - * the the signal present on GPIOD4_CF_nCD when a CF card is inserted. + * the signal present on GPIOD4_CF_nCD when a CF card is inserted. * If the IRQ type is not changed, the asic3 interrupt handler will loop * repeatedly because it is unable to clear the level trigger interrupt. */ diff --git a/drivers/pinctrl/nomadik/pinctrl-nomadik.c b/drivers/pinctrl/nomadik/pinctrl-nomadik.c index a6a22054c0ba..ff28b7bce456 100644 --- a/drivers/pinctrl/nomadik/pinctrl-nomadik.c +++ b/drivers/pinctrl/nomadik/pinctrl-nomadik.c @@ -1265,7 +1265,7 @@ static int nmk_gpio_probe(struct platform_device *dev) platform_set_drvdata(dev, nmk_chip); /* - * Let the generic code handle this edge IRQ, the the chained + * Let the generic code handle this edge IRQ, the chained * handler will perform the actual work of handling the parent * interrupt. */ diff --git a/drivers/pinctrl/pinctrl-at91.c b/drivers/pinctrl/pinctrl-at91.c index 2f797cb7e205..a3f00a93a6b0 100644 --- a/drivers/pinctrl/pinctrl-at91.c +++ b/drivers/pinctrl/pinctrl-at91.c @@ -1632,7 +1632,7 @@ static int at91_gpio_of_irq_setup(struct platform_device *pdev, writel_relaxed(~0, at91_gpio->regbase + PIO_IDR); /* - * Let the generic code handle this edge IRQ, the the chained + * Let the generic code handle this edge IRQ, the chained * handler will perform the actual work of handling the parent * interrupt. */ diff --git a/drivers/power/power_supply_sysfs.c b/drivers/power/power_supply_sysfs.c index 9134e3d2d95e..f215c66ac0fc 100644 --- a/drivers/power/power_supply_sysfs.c +++ b/drivers/power/power_supply_sysfs.c @@ -302,8 +302,9 @@ int power_supply_uevent(struct device *dev, struct kobj_uevent_env *env) ret = power_supply_show_property(dev, attr, prop_buf); if (ret == -ENODEV || ret == -ENODATA) { - /* When a battery is absent, we expect -ENODEV. Don't abort; - send the uevent with at least the the PRESENT=0 property */ + /* When a battery is absent, we expect -ENODEV. + * Don't abort; send the uevent with at least + * the PRESENT=0 property */ ret = 0; continue; } diff --git a/drivers/rtc/rtc-rs5c372.c b/drivers/rtc/rtc-rs5c372.c index 28871cd7e3b5..f224020e14d8 100644 --- a/drivers/rtc/rtc-rs5c372.c +++ b/drivers/rtc/rtc-rs5c372.c @@ -122,7 +122,7 @@ static int rs5c_get_regs(struct rs5c372 *rs5c) * least 80219 chips; this works around that bug. * * The third method on the other hand doesn't work for the SMBus-only - * configurations, so we use the the first method there, stripping off + * configurations, so we use the first method there, stripping off * the extra register in the process. */ if (rs5c->smbus) { diff --git a/drivers/s390/net/qeth_core_main.c b/drivers/s390/net/qeth_core_main.c index 3466d3cb7647..c40b7359ce63 100644 --- a/drivers/s390/net/qeth_core_main.c +++ b/drivers/s390/net/qeth_core_main.c @@ -3519,7 +3519,7 @@ static void qeth_flush_buffers(struct qeth_qdio_out_q *queue, int index, if (!atomic_read(&queue->set_pci_flags_count)) { /* * there's no outstanding PCI any more, so we - * have to request a PCI to be sure the the PCI + * have to request a PCI to be sure that the PCI * will wake at some time in the future then we * can flush packed buffers that might still be * hanging around, which can happen if no diff --git a/drivers/scsi/aacraid/aachba.c b/drivers/scsi/aacraid/aachba.c index 9b3dd6ef6a0b..28a834c9e8b0 100644 --- a/drivers/scsi/aacraid/aachba.c +++ b/drivers/scsi/aacraid/aachba.c @@ -975,7 +975,7 @@ static void get_container_serial_callback(void *context, struct fib * fibptr) VPDPage83Data.IdDescriptorType1.ProductId)); /* Convert to ascii based serial number. - * The LSB is the the end. + * The LSB is at the end. */ for (i = 0; i < 8; i++) { u8 temp = diff --git a/drivers/scsi/bfa/bfa_fcs_rport.c b/drivers/scsi/bfa/bfa_fcs_rport.c index 2035b0d64351..e62a7346428a 100644 --- a/drivers/scsi/bfa/bfa_fcs_rport.c +++ b/drivers/scsi/bfa/bfa_fcs_rport.c @@ -1983,7 +1983,7 @@ bfa_fcs_rport_gidpn_response(void *fcsarg, struct bfa_fcxp_s *fcxp, void *cbarg, /* * Device's PID has changed. We need to cleanup * and re-login. If there is another device with - * the the newly discovered pid, send an scn notice + * the newly discovered pid, send an scn notice * so that its new pid can be discovered. */ list_for_each(qe, &rport->port->rport_q) { diff --git a/drivers/scsi/fcoe/fcoe.c b/drivers/scsi/fcoe/fcoe.c index ec193a8357d7..8dd83bca7d8f 100644 --- a/drivers/scsi/fcoe/fcoe.c +++ b/drivers/scsi/fcoe/fcoe.c @@ -511,7 +511,7 @@ static void fcoe_interface_cleanup(struct fcoe_interface *fcoe) * @skb: The receive skb * @netdev: The associated net device * @ptype: The packet_type structure which was used to register this handler - * @orig_dev: The original net_device the the skb was received on. + * @orig_dev: The original net_device that the skb was received on. * (in case dev is a bond) * * Returns: 0 for success @@ -2725,7 +2725,7 @@ module_exit(fcoe_exit); * fcoe_flogi_resp() - FCoE specific FLOGI and FDISC response handler * @seq: active sequence in the FLOGI or FDISC exchange * @fp: response frame, or error encoded in a pointer (timeout) - * @arg: pointer the the fcoe_ctlr structure + * @arg: pointer to the fcoe_ctlr structure * * This handles MAC address management for FCoE, then passes control on to * the libfc FLOGI response handler. @@ -2754,7 +2754,7 @@ done: * fcoe_logo_resp() - FCoE specific LOGO response handler * @seq: active sequence in the LOGO exchange * @fp: response frame, or error encoded in a pointer (timeout) - * @arg: pointer the the fcoe_ctlr structure + * @arg: pointer to the fcoe_ctlr structure * * This handles MAC address management for FCoE, then passes control on to * the libfc LOGO response handler. diff --git a/drivers/scsi/fcoe/fcoe_ctlr.c b/drivers/scsi/fcoe/fcoe_ctlr.c index 34a1b1f333b4..65a53a9eb059 100644 --- a/drivers/scsi/fcoe/fcoe_ctlr.c +++ b/drivers/scsi/fcoe/fcoe_ctlr.c @@ -213,7 +213,7 @@ static int fcoe_sysfs_fcf_add(struct fcoe_fcf *new) * that doesn't have a priv (fcf was deleted). However, * libfcoe will always delete FCFs before trying to add * them. This is ensured because both recv_adv and - * age_fcfs are protected by the the fcoe_ctlr's mutex. + * age_fcfs are protected by the fcoe_ctlr's mutex. * This means that we should never get a FCF with a * non-NULL priv pointer. */ @@ -694,7 +694,7 @@ static int fcoe_ctlr_encaps(struct fcoe_ctlr *fip, struct fc_lport *lport, * * The caller must check that the length is a multiple of 4. * The SKB must have enough headroom (28 bytes) and tailroom (8 bytes). - * The the skb must also be an fc_frame. + * The skb must also be an fc_frame. * * This is called from the lower-level driver with spinlocks held, * so we must not take a mutex here. diff --git a/drivers/scsi/isci/host.h b/drivers/scsi/isci/host.h index 22a9bb1abae1..025ec5c10978 100644 --- a/drivers/scsi/isci/host.h +++ b/drivers/scsi/isci/host.h @@ -244,7 +244,7 @@ enum sci_controller_states { SCIC_INITIALIZED, /** - * This state indicates the the controller is in the process of becoming + * This state indicates that the controller is in the process of becoming * ready (i.e. starting). In this state no new IO operations are permitted. * This state is entered from the INITIALIZED state. */ diff --git a/drivers/scsi/isci/remote_device.h b/drivers/scsi/isci/remote_device.h index 47a013fffae7..07af745220eb 100644 --- a/drivers/scsi/isci/remote_device.h +++ b/drivers/scsi/isci/remote_device.h @@ -198,7 +198,7 @@ enum sci_status sci_remote_device_reset_complete( * permitted. This state is entered from the INITIAL state. This state * is entered from the STOPPING state. * - * @SCI_DEV_STARTING: This state indicates the the remote device is in + * @SCI_DEV_STARTING: This state indicates that the remote device is in * the process of becoming ready (i.e. starting). In this state no new * IO operations are permitted. This state is entered from the STOPPED * state. diff --git a/drivers/scsi/isci/remote_node_context.h b/drivers/scsi/isci/remote_node_context.h index c7ee81d01125..f22950b12b8b 100644 --- a/drivers/scsi/isci/remote_node_context.h +++ b/drivers/scsi/isci/remote_node_context.h @@ -154,7 +154,7 @@ enum sci_remote_node_context_destination_state { /** * struct sci_remote_node_context - This structure contains the data * associated with the remote node context object. The remote node context - * (RNC) object models the the remote device information necessary to manage + * (RNC) object models the remote device information necessary to manage * the silicon RNC. */ struct sci_remote_node_context { diff --git a/drivers/scsi/isci/task.c b/drivers/scsi/isci/task.c index 6dcaed0c1fc8..53f17367fd71 100644 --- a/drivers/scsi/isci/task.c +++ b/drivers/scsi/isci/task.c @@ -67,7 +67,7 @@ /** * isci_task_refuse() - complete the request to the upper layer driver in * the case where an I/O needs to be completed back in the submit path. -* @ihost: host on which the the request was queued +* @ihost: host on which the request was queued * @task: request to complete * @response: response code for the completed task. * @status: status code for the completed task. diff --git a/drivers/scsi/lpfc/lpfc_attr.c b/drivers/scsi/lpfc/lpfc_attr.c index d65bd178d131..61dc552a2097 100644 --- a/drivers/scsi/lpfc/lpfc_attr.c +++ b/drivers/scsi/lpfc/lpfc_attr.c @@ -1685,7 +1685,7 @@ lpfc_##attr##_show(struct device *dev, struct device_attribute *attr, \ * takes a default argument, a minimum and maximum argument. * * lpfc_##attr##_init: Initializes an attribute. - * @phba: pointer the the adapter structure. + * @phba: pointer to the adapter structure. * @val: integer attribute value. * * Validates the min and max values then sets the adapter config field @@ -1718,7 +1718,7 @@ lpfc_##attr##_init(struct lpfc_hba *phba, uint val) \ * into a function with the name lpfc_hba_queue_depth_set * * lpfc_##attr##_set: Sets an attribute value. - * @phba: pointer the the adapter structure. + * @phba: pointer to the adapter structure. * @val: integer attribute value. * * Description: @@ -1851,7 +1851,7 @@ lpfc_##attr##_show(struct device *dev, struct device_attribute *attr, \ * lpfc_##attr##_init: validates the min and max values then sets the * adapter config field accordingly, or uses the default if out of range * and prints an error message. - * @phba: pointer the the adapter structure. + * @phba: pointer to the adapter structure. * @val: integer attribute value. * * Returns: @@ -1883,7 +1883,7 @@ lpfc_##attr##_init(struct lpfc_vport *vport, uint val) \ * lpfc_##attr##_set: validates the min and max values then sets the * adapter config field if in the valid range. prints error message * and does not set the parameter if invalid. - * @phba: pointer the the adapter structure. + * @phba: pointer to the adapter structure. * @val: integer attribute value. * * Returns: diff --git a/drivers/scsi/lpfc/lpfc_els.c b/drivers/scsi/lpfc/lpfc_els.c index 851e8efe364e..c4a37ee39a6b 100644 --- a/drivers/scsi/lpfc/lpfc_els.c +++ b/drivers/scsi/lpfc/lpfc_els.c @@ -5822,7 +5822,7 @@ reject_out: * @rrq: Pointer to the rrq struct. * * Build a ELS RRQ command and send it to the target. If the issue_iocb is - * Successful the the completion handler will clear the RRQ. + * successful, the completion handler will clear the RRQ. * * Return codes * 0 - Successfully sent rrq els iocb. diff --git a/drivers/scsi/lpfc/lpfc_hbadisc.c b/drivers/scsi/lpfc/lpfc_hbadisc.c index 2500f15d437f..b2997a427b82 100644 --- a/drivers/scsi/lpfc/lpfc_hbadisc.c +++ b/drivers/scsi/lpfc/lpfc_hbadisc.c @@ -2040,7 +2040,7 @@ static void lpfc_sli4_fcf_pri_list_del(struct lpfc_hba *phba, * @phba: pointer to lpfc hba data structure. * @fcf_index the index of the fcf record to update * This routine acquires the hbalock and then set the LPFC_FCF_FLOGI_FAILED - * flag so the the round robin slection for the particular priority level + * flag so that the round robin selection for the particular priority level * will try a different fcf record that does not have this bit set. * If the fcf record is re-read for any reason this flag is cleared brfore * adding it to the priority list. @@ -5790,7 +5790,7 @@ lpfc_nlp_get(struct lpfc_nodelist *ndlp) } /* This routine decrements the reference count for a ndlp structure. If the - * count goes to 0, this indicates the the associated nodelist should be + * count goes to 0, this indicates that the associated nodelist should be * freed. Returning 1 indicates the ndlp resource has been released; on the * other hand, returning 0 indicates the ndlp resource has not been released * yet. diff --git a/drivers/scsi/lpfc/lpfc_init.c b/drivers/scsi/lpfc/lpfc_init.c index e8c8c1ecc1f5..ebf956761d12 100644 --- a/drivers/scsi/lpfc/lpfc_init.c +++ b/drivers/scsi/lpfc/lpfc_init.c @@ -3972,7 +3972,7 @@ lpfc_sli4_async_link_evt(struct lpfc_hba *phba, bf_set(lpfc_mbx_read_top_link_spd, la, lpfc_sli4_parse_latt_link_speed(phba, acqe_link)); - /* Fake the the following irrelvant fields */ + /* Fake the following irrelevant fields */ bf_set(lpfc_mbx_read_top_topology, la, LPFC_TOPOLOGY_PT_PT); bf_set(lpfc_mbx_read_top_alpa_granted, la, 0); bf_set(lpfc_mbx_read_top_il, la, 0); diff --git a/drivers/scsi/lpfc/lpfc_mbox.c b/drivers/scsi/lpfc/lpfc_mbox.c index 816f596cda60..fe2856ee2db8 100644 --- a/drivers/scsi/lpfc/lpfc_mbox.c +++ b/drivers/scsi/lpfc/lpfc_mbox.c @@ -2265,7 +2265,7 @@ lpfc_sli4_dump_cfg_rg23(struct lpfc_hba *phba, struct lpfcMboxq *mbox) * information via a READ_FCF mailbox command. This mailbox command also is used * to indicate where received unsolicited frames from this FCF will be sent. By * default this routine will set up the FCF to forward all unsolicited frames - * the the RQ ID passed in the @phba. This can be overridden by the caller for + * that the RQ ID passed in the @phba. This can be overridden by the caller for * more complicated setups. **/ void diff --git a/drivers/scsi/lpfc/lpfc_sli.c b/drivers/scsi/lpfc/lpfc_sli.c index 56f73682d4bd..5b6bb7132703 100644 --- a/drivers/scsi/lpfc/lpfc_sli.c +++ b/drivers/scsi/lpfc/lpfc_sli.c @@ -16787,7 +16787,7 @@ out: * the offset after the write object mailbox has completed. @size is used to * determine the end of the object and whether the eof bit should be set. * - * Return 0 is successful and offset will contain the the new offset to use + * Return 0 is successful and offset will contain the new offset to use * for the next write. * Return negative value for error cases. **/ diff --git a/drivers/scsi/pm8001/pm8001_hwi.c b/drivers/scsi/pm8001/pm8001_hwi.c index 96dcc097a463..bea660c7fba6 100644 --- a/drivers/scsi/pm8001/pm8001_hwi.c +++ b/drivers/scsi/pm8001/pm8001_hwi.c @@ -3220,7 +3220,7 @@ int pm8001_mpi_local_phy_ctl(struct pm8001_hba_info *pm8001_ha, void *piomb) * * when HBA driver received the identify done event or initiate FIS received * event(for SATA), it will invoke this function to notify the sas layer that - * the sas toplogy has formed, please discover the the whole sas domain, + * the sas toplogy has formed, please discover the whole sas domain, * while receive a broadcast(change) primitive just tell the sas * layer to discover the changed domain rather than the whole domain. */ diff --git a/drivers/spi/spi-ppc4xx.c b/drivers/spi/spi-ppc4xx.c index 54fb984a3e17..87d239240463 100644 --- a/drivers/spi/spi-ppc4xx.c +++ b/drivers/spi/spi-ppc4xx.c @@ -354,7 +354,7 @@ static void spi_ppc4xx_enable(struct ppc4xx_spi *hw) { /* * On all 4xx PPC's the SPI bus is shared/multiplexed with - * the 2nd I2C bus. We need to enable the the SPI bus before + * the 2nd I2C bus. We need to enable the SPI bus before * using it. */ diff --git a/drivers/staging/iio/magnetometer/hmc5843_core.c b/drivers/staging/iio/magnetometer/hmc5843_core.c index fffca3a9f637..3af540417a8b 100644 --- a/drivers/staging/iio/magnetometer/hmc5843_core.c +++ b/drivers/staging/iio/magnetometer/hmc5843_core.c @@ -1,5 +1,5 @@ /* - * Device driver for the the HMC5843 multi-chip module designed + * Device driver for the HMC5843 multi-chip module designed * for low field magnetic sensing. * * Copyright (C) 2010 Texas Instruments diff --git a/drivers/staging/rtl8192u/ieee80211/ieee80211_rx.c b/drivers/staging/rtl8192u/ieee80211/ieee80211_rx.c index 9fbb53d8c6bf..a476a9f8fac0 100644 --- a/drivers/staging/rtl8192u/ieee80211/ieee80211_rx.c +++ b/drivers/staging/rtl8192u/ieee80211/ieee80211_rx.c @@ -920,7 +920,7 @@ int ieee80211_rx(struct ieee80211_device *ieee, struct sk_buff *skb, int i; struct ieee80211_rxb *rxb = NULL; - // cheat the the hdr type + /* cheat the hdr type */ hdr = (struct ieee80211_hdr_4addr *)skb->data; stats = &ieee->stats; diff --git a/drivers/staging/rtl8723au/core/rtw_cmd.c b/drivers/staging/rtl8723au/core/rtw_cmd.c index 46aea16cbf78..408888ea6f5c 100644 --- a/drivers/staging/rtl8723au/core/rtw_cmd.c +++ b/drivers/staging/rtl8723au/core/rtw_cmd.c @@ -507,7 +507,7 @@ int rtw_joinbss_cmd23a(struct rtw_adapter *padapter, psecnetwork->IELength = 0; /* Added by Albert 2009/02/18 */ - /* If the the driver wants to use the bssid to create the + /* If the driver wants to use the bssid to create the * connection. If not, we have to copy the connecting AP's * MAC address to it so that the driver just has the bssid * information for PMKIDList searching. */ diff --git a/drivers/target/target_core_alua.c b/drivers/target/target_core_alua.c index 75cbde1f7c5b..caa782ca2456 100644 --- a/drivers/target/target_core_alua.c +++ b/drivers/target/target_core_alua.c @@ -409,7 +409,7 @@ target_emulate_set_target_port_groups(struct se_cmd *cmd) } else { /* * Extract the RELATIVE TARGET PORT IDENTIFIER to identify - * the Target Port in question for the the incoming + * the Target Port in question for the incoming * SET_TARGET_PORT_GROUPS op. */ rtpi = get_unaligned_be16(ptr + 2); diff --git a/drivers/thunderbolt/ctl.h b/drivers/thunderbolt/ctl.h index ba87d6e731dd..1a4ba247f160 100644 --- a/drivers/thunderbolt/ctl.h +++ b/drivers/thunderbolt/ctl.h @@ -44,7 +44,7 @@ struct tb_cfg_result { * If err = 1 then this is the port that send the * error. * If err = 0 and if this was a cfg_read/write then - * this is the the upstream port of the responding + * this is the upstream port of the responding * switch. * Otherwise the field is set to zero. */ diff --git a/drivers/tty/hvc/Kconfig b/drivers/tty/hvc/Kconfig index 8902f9b4df71..c1bcc11633f1 100644 --- a/drivers/tty/hvc/Kconfig +++ b/drivers/tty/hvc/Kconfig @@ -101,7 +101,7 @@ config HVC_BFIN_JTAG select HVC_DRIVER help This console uses the Blackfin JTAG to create a console under the - the HVC driver. If you don't have JTAG, then you probably don't + HVC driver. If you don't have JTAG, then you probably don't want this option. config HVCS diff --git a/drivers/usb/host/max3421-hcd.c b/drivers/usb/host/max3421-hcd.c index fc1fd403973a..0a5fb52f6d4a 100644 --- a/drivers/usb/host/max3421-hcd.c +++ b/drivers/usb/host/max3421-hcd.c @@ -314,8 +314,7 @@ static const int hrsl_to_error[] = { /* * See http://www.beyondlogic.org/usbnutshell/usb4.shtml#Control for a - * reasonable overview of how control transfers use the the IN/OUT - * tokens. + * reasonable overview of how control transfers use the IN/OUT tokens. */ #define MAX3421_HXFR_BULK_IN(ep) (0x00 | (ep)) /* bulk or interrupt */ #define MAX3421_HXFR_SETUP 0x10 diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c index f5397a517c54..9a380d2755e3 100644 --- a/drivers/usb/host/xhci-ring.c +++ b/drivers/usb/host/xhci-ring.c @@ -1610,7 +1610,7 @@ static void handle_port_status(struct xhci_hcd *xhci, /* * Check to see if xhci-hub.c is waiting on RExit to U0 transition (or - * RExit to a disconnect state). If so, let the the driver know it's + * RExit to a disconnect state). If so, let the driver know it's * out of the RExit state. */ if (!DEV_SUPERSPEED(temp) && diff --git a/drivers/usb/serial/cypress_m8.c b/drivers/usb/serial/cypress_m8.c index 01bf53392819..1b99a08ca2de 100644 --- a/drivers/usb/serial/cypress_m8.c +++ b/drivers/usb/serial/cypress_m8.c @@ -261,7 +261,7 @@ static int analyze_baud_rate(struct usb_serial_port *port, speed_t new_rate) /* * Mike Isely 2-Feb-2008: The * Cypress app note that describes this mechanism - * states the the low-speed part can't handle more + * states that the low-speed part can't handle more * than 800 bytes/sec, in which case 4800 baud is the * safest speed for a part like that. */ diff --git a/drivers/usb/serial/mos7720.c b/drivers/usb/serial/mos7720.c index 4f70df33975a..fe5e40b8141a 100644 --- a/drivers/usb/serial/mos7720.c +++ b/drivers/usb/serial/mos7720.c @@ -429,7 +429,7 @@ static int write_parport_reg_nonblock(struct mos7715_parport *mos_parport, } /* - * This is the the common top part of all parallel port callback operations that + * This is the common top part of all parallel port callback operations that * send synchronous messages to the device. This implements convoluted locking * that avoids two scenarios: (1) a port operation is called after usbserial * has called our release function, at which point struct mos7715_parport has diff --git a/drivers/usb/wusbcore/devconnect.c b/drivers/usb/wusbcore/devconnect.c index 3f4f5fbded55..fe4447f3f2ea 100644 --- a/drivers/usb/wusbcore/devconnect.c +++ b/drivers/usb/wusbcore/devconnect.c @@ -46,7 +46,7 @@ * * ASSUMPTIONS: * - * - We use the the as device address the port number where it is + * - We use as device address the port number where it is * connected (port 0 doesn't exist). For unauth, it is 128 + that. * * ROADMAP: diff --git a/drivers/uwb/drp-ie.c b/drivers/uwb/drp-ie.c index b7d4f6b75eef..caa4cb40334d 100644 --- a/drivers/uwb/drp-ie.c +++ b/drivers/uwb/drp-ie.c @@ -262,7 +262,7 @@ int uwb_drp_ie_update(struct uwb_rsv *rsv) * We are given a zone id and the MAS bitmap of bits that need to be set in * this zone. Note that this zone may already have bits set and this only * adds settings - we cannot simply assign the MAS bitmap contents to the - * zone contents. We iterate over the the bits (MAS) in the zone and set the + * zone contents. We iterate over the bits (MAS) in the zone and set the * bits that are set in the given MAS bitmap. */ static diff --git a/drivers/video/fbdev/omap/sossi.c b/drivers/video/fbdev/omap/sossi.c index d4e7684e7045..501bc08dc125 100644 --- a/drivers/video/fbdev/omap/sossi.c +++ b/drivers/video/fbdev/omap/sossi.c @@ -370,7 +370,7 @@ static void sossi_set_bits_per_cycle(int bpc) int bus_pick_count, bus_pick_width; /* - * We set explicitly the the bus_pick_count as well, although + * We set explicitly the bus_pick_count as well, although * with remapping/reordering disabled it will be calculated by HW * as (32 / bus_pick_width). */ diff --git a/drivers/video/fbdev/sis/sis_accel.c b/drivers/video/fbdev/sis/sis_accel.c index ceb434c95c0d..9177b8056356 100644 --- a/drivers/video/fbdev/sis/sis_accel.c +++ b/drivers/video/fbdev/sis/sis_accel.c @@ -215,7 +215,7 @@ SiS310SubsequentScreenToScreenCopy(struct sis_video_info *ivideo, int src_x, int * and destination blitting areas overlap and * adapt the bitmap addresses synchronously * if the coordinates exceed the valid range. - * The the areas do not overlap, we do our + * If the areas do not overlap, we do our * normal check. */ if((mymax - mymin) < height) { diff --git a/fs/autofs4/dev-ioctl.c b/fs/autofs4/dev-ioctl.c index ac7d921ed984..b3179b482529 100644 --- a/fs/autofs4/dev-ioctl.c +++ b/fs/autofs4/dev-ioctl.c @@ -511,7 +511,7 @@ static int autofs_dev_ioctl_askumount(struct file *fp, * located path is the root of a mount we return 1 along with * the super magic of the mount or 0 otherwise. * - * In both cases the the device number (as returned by + * In both cases the device number (as returned by * new_encode_dev()) is also returned. */ static int autofs_dev_ioctl_ismountpoint(struct file *fp, diff --git a/fs/btrfs/dev-replace.c b/fs/btrfs/dev-replace.c index 5ec03d999c37..b7173d53ca8b 100644 --- a/fs/btrfs/dev-replace.c +++ b/fs/btrfs/dev-replace.c @@ -854,7 +854,7 @@ int btrfs_dev_replace_is_ongoing(struct btrfs_dev_replace *dev_replace) * something that can happen if the dev_replace * procedure is suspended by an umount and then * the tgtdev is missing (or "btrfs dev scan") was - * not called and the the filesystem is remounted + * not called and the filesystem is remounted * in degraded state. This does not stop the * dev_replace procedure. It needs to be canceled * manually if the cancelation is wanted. diff --git a/fs/btrfs/send.c b/fs/btrfs/send.c index d6033f540cc7..141ab13a538c 100644 --- a/fs/btrfs/send.c +++ b/fs/btrfs/send.c @@ -3555,7 +3555,7 @@ verbose_printk("btrfs: process_recorded_refs %llu\n", sctx->cur_ino); /* * We may have refs where the parent directory does not exist * yet. This happens if the parent directories inum is higher - * the the current inum. To handle this case, we create the + * than the current inum. To handle this case, we create the * parent directory out of order. But we need to check if this * did already happen before due to other refs in the same dir. */ diff --git a/fs/btrfs/tree-log.c b/fs/btrfs/tree-log.c index c5b8ba37f88e..8f22f791cff9 100644 --- a/fs/btrfs/tree-log.c +++ b/fs/btrfs/tree-log.c @@ -2710,7 +2710,7 @@ int btrfs_sync_log(struct btrfs_trans_handle *trans, mutex_unlock(&log_root_tree->log_mutex); /* - * nobody else is going to jump in and write the the ctree + * nobody else is going to jump in and write the ctree * super here because the log_commit atomic below is protecting * us. We must be called with a transaction handle pinning * the running transaction open, so a full commit can't hop diff --git a/fs/dcache.c b/fs/dcache.c index 656ce522a218..3d4f029c6ce0 100644 --- a/fs/dcache.c +++ b/fs/dcache.c @@ -2042,8 +2042,8 @@ EXPORT_SYMBOL(d_obtain_root); * same inode, only the actual correct case is stored in the dcache for * case-insensitive filesystems. * - * For a case-insensitive lookup match and if the the case-exact dentry - * already exists in in the dcache, use it and return it. + * For a case-insensitive lookup match and if the case-exact dentry + * already exists in the dcache, use it and return it. * * If no entry exists with the exact case name, allocate new dentry with * the exact case, and return the spliced entry. diff --git a/fs/ecryptfs/keystore.c b/fs/ecryptfs/keystore.c index 6bd67e2011f0..70a39a6e0bc7 100644 --- a/fs/ecryptfs/keystore.c +++ b/fs/ecryptfs/keystore.c @@ -899,7 +899,7 @@ struct ecryptfs_parse_tag_70_packet_silly_stack { * @filename: This function kmalloc's the memory for the filename * @filename_size: This function sets this to the amount of memory * kmalloc'd for the filename - * @packet_size: This function sets this to the the number of octets + * @packet_size: This function sets this to the number of octets * in the packet parsed * @mount_crypt_stat: The mount-wide cryptographic context * @data: The memory location containing the start of the tag 70 diff --git a/fs/ext2/ext2.h b/fs/ext2/ext2.h index 8d15febd0aa3..3c4bdea67343 100644 --- a/fs/ext2/ext2.h +++ b/fs/ext2/ext2.h @@ -51,7 +51,7 @@ struct ext2_block_alloc_info { /* * Was i_next_alloc_goal in ext2_inode_info * is the *physical* companion to i_next_alloc_block. - * it the the physical block number of the block which was most-recentl + * it is the physical block number of the block which was most-recently * allocated to this file. This give us the goal (target) for the next * allocation when we detect linearly ascending requests. */ diff --git a/fs/ext4/inline.c b/fs/ext4/inline.c index feb2cafbeace..8999acdd830d 100644 --- a/fs/ext4/inline.c +++ b/fs/ext4/inline.c @@ -273,7 +273,7 @@ static int ext4_create_inline_data(handle_t *handle, len = 0; } - /* Insert the the xttr entry. */ + /* Insert the xttr entry. */ i.value = value; i.value_len = len; @@ -836,7 +836,7 @@ out: /* * Prepare the write for the inline data. - * If the the data can be written into the inode, we just read + * If the data can be written into the inode, we just read * the page and make it uptodate, and start the journal. * Otherwise read the page, makes it dirty so that it can be * handle in writepages(the i_disksize update is left to the diff --git a/fs/f2fs/segment.h b/fs/f2fs/segment.h index 85d7fa7514b2..e3fa631beb74 100644 --- a/fs/f2fs/segment.h +++ b/fs/f2fs/segment.h @@ -158,7 +158,7 @@ struct seg_entry { unsigned short valid_blocks; /* # of valid blocks */ unsigned char *cur_valid_map; /* validity bitmap of blocks */ /* - * # of valid blocks and the validity bitmap stored in the the last + * # of valid blocks and the validity bitmap stored in the last * checkpoint pack. This information is used by the SSR mode. */ unsigned short ckpt_valid_blocks; diff --git a/fs/kernfs/file.c b/fs/kernfs/file.c index 2bacb9988566..5a46b04f071a 100644 --- a/fs/kernfs/file.c +++ b/fs/kernfs/file.c @@ -264,7 +264,7 @@ static ssize_t kernfs_fop_read(struct file *file, char __user *user_buf, * There is no easy way for us to know if userspace is only doing a partial * write, so we don't support them. We expect the entire buffer to come on * the first write. Hint: if you're writing a value, first read the file, - * modify only the the value you're changing, then write entire buffer + * modify only the value you're changing, then write entire buffer * back. */ static ssize_t kernfs_fop_write(struct file *file, const char __user *user_buf, diff --git a/fs/ocfs2/localalloc.c b/fs/ocfs2/localalloc.c index 857bbbcd39f3..51125321f21a 100644 --- a/fs/ocfs2/localalloc.c +++ b/fs/ocfs2/localalloc.c @@ -690,7 +690,7 @@ int ocfs2_reserve_local_alloc_bits(struct ocfs2_super *osb, /* * Under certain conditions, the window slide code * might have reduced the number of bits available or - * disabled the the local alloc entirely. Re-check + * disabled the local alloc entirely. Re-check * here and return -ENOSPC if necessary. */ status = -ENOSPC; diff --git a/fs/xfs/xfs_export.c b/fs/xfs/xfs_export.c index b97359ba2648..e05c80d4705d 100644 --- a/fs/xfs/xfs_export.c +++ b/fs/xfs/xfs_export.c @@ -71,7 +71,7 @@ xfs_fs_encode_fh( fileid_type = FILEID_INO32_GEN_PARENT; /* - * If the the filesystem may contain 64bit inode numbers, we need + * If the filesystem may contain 64bit inode numbers, we need * to use larger file handles that can represent them. * * While we only allocate inodes that do not fit into 32 bits any diff --git a/include/drm/drm_rect.h b/include/drm/drm_rect.h index 26bb55e9e8b6..37cdb83e1e24 100644 --- a/include/drm/drm_rect.h +++ b/include/drm/drm_rect.h @@ -120,7 +120,7 @@ static inline int drm_rect_height(const struct drm_rect *r) } /** - * drm_rect_visible - determine if the the rectangle is visible + * drm_rect_visible - determine if the rectangle is visible * @r: rectangle whose visibility is returned * * RETURNS: diff --git a/include/linux/ieee80211.h b/include/linux/ieee80211.h index b9c7897dc566..c871164f6c89 100644 --- a/include/linux/ieee80211.h +++ b/include/linux/ieee80211.h @@ -2056,7 +2056,7 @@ enum ieee80211_tdls_actioncode { */ #define WLAN_EXT_CAPA1_EXT_CHANNEL_SWITCHING BIT(2) -/* TDLS capabilities in the the 4th byte of @WLAN_EID_EXT_CAPABILITY */ +/* TDLS capabilities in the 4th byte of @WLAN_EID_EXT_CAPABILITY */ #define WLAN_EXT_CAPA4_TDLS_BUFFER_STA BIT(4) #define WLAN_EXT_CAPA4_TDLS_PEER_PSM BIT(5) #define WLAN_EXT_CAPA4_TDLS_CHAN_SWITCH BIT(6) diff --git a/include/linux/mic_bus.h b/include/linux/mic_bus.h index d5b5f76d57ef..91c32b80c6d1 100644 --- a/include/linux/mic_bus.h +++ b/include/linux/mic_bus.h @@ -17,7 +17,7 @@ * * Intel MIC Bus driver. * - * This implementation is very similar to the the virtio bus driver + * This implementation is very similar to the virtio bus driver * implementation @ include/linux/virtio.h. */ #ifndef _MIC_BUS_H_ diff --git a/include/linux/mm.h b/include/linux/mm.h index 8b086070c3a5..216390d7aaa9 100644 --- a/include/linux/mm.h +++ b/include/linux/mm.h @@ -213,7 +213,7 @@ extern pgprot_t protection_map[16]; #define FAULT_FLAG_USER 0x40 /* The fault originated in userspace */ /* - * vm_fault is filled by the the pagefault handler and passed to the vma's + * vm_fault is filled by the pagefault handler and passed to the vma's * ->fault function. The vma's ->fault is responsible for returning a bitmask * of VM_FAULT_xxx flags that give details about how the fault was handled. * diff --git a/include/linux/moduleparam.h b/include/linux/moduleparam.h index 1c9effa25e26..85a8edc122bf 100644 --- a/include/linux/moduleparam.h +++ b/include/linux/moduleparam.h @@ -106,7 +106,7 @@ struct kparam_array * ".") the kernel commandline parameter. Note that - is changed to _, so * the user can use "foo-bar=1" even for variable "foo_bar". * - * @perm is 0 if the the variable is not to appear in sysfs, or 0444 + * @perm is 0 if the variable is not to appear in sysfs, or 0444 * for world-readable, 0644 for root-writable, etc. Note that if it * is writable, you may need to use kparam_block_sysfs_write() around * accesses (esp. charp, which can be kfreed when it changes). diff --git a/include/linux/skbuff.h b/include/linux/skbuff.h index 0991259643d6..300289fe21a1 100644 --- a/include/linux/skbuff.h +++ b/include/linux/skbuff.h @@ -2865,7 +2865,7 @@ static inline bool skb_defer_rx_timestamp(struct sk_buff *skb) * must call this function to return the skb back to the stack, with * or without a timestamp. * - * @skb: clone of the the original outgoing packet + * @skb: clone of the original outgoing packet * @hwtstamps: hardware time stamps, may be NULL if not available * */ diff --git a/include/media/v4l2-subdev.h b/include/media/v4l2-subdev.h index 5beeb8744fd1..e51a94b97b30 100644 --- a/include/media/v4l2-subdev.h +++ b/include/media/v4l2-subdev.h @@ -412,10 +412,10 @@ struct v4l2_subdev_sensor_ops { /* [rt]x_g_parameters: Get the current operating parameters and state of the - the IR receiver or transmitter. + IR receiver or transmitter. [rt]x_s_parameters: Set the current operating parameters and state of the - the IR receiver or transmitter. It is recommended to call + IR receiver or transmitter. It is recommended to call [rt]x_g_parameters first to fill out the current state, and only change the fields that need to be changed. Upon return, the actual device operating parameters and state will be returned. Note that hardware diff --git a/include/net/caif/caif_layer.h b/include/net/caif/caif_layer.h index 94e5ed64dc6d..e9a8d524ab06 100644 --- a/include/net/caif/caif_layer.h +++ b/include/net/caif/caif_layer.h @@ -184,7 +184,7 @@ struct cflayer { * CAIF packet downwards in the stack. * Packet handling rules: * - The CAIF packet (cfpkt) ownership is passed to the - * transmit function. This means that the the packet + * transmit function. This means that the packet * cannot be accessed after passing it to the below * layer using dn->transmit(). * diff --git a/include/net/ip6_fib.h b/include/net/ip6_fib.h index 20e80fa7bbdd..a99fdfcc894d 100644 --- a/include/net/ip6_fib.h +++ b/include/net/ip6_fib.h @@ -105,7 +105,7 @@ struct rt6_info { struct in6_addr rt6i_gateway; /* Multipath routes: - * siblings is a list of rt6_info that have the the same metric/weight, + * siblings is a list of rt6_info that have the same metric/weight, * destination, but not the same gateway. nsiblings is just a cache * to speed up lookup. */ diff --git a/include/net/wimax.h b/include/net/wimax.h index c52b68577cb0..c9705a3eb3b7 100644 --- a/include/net/wimax.h +++ b/include/net/wimax.h @@ -43,7 +43,7 @@ * * USAGE * - * Embed a `struct wimax_dev` at the beginning of the the device's + * Embed a `struct wimax_dev` at the beginning of the device's * private structure, initialize and register it. For details, see * `struct wimax_dev`s documentation. * diff --git a/include/uapi/asm-generic/fcntl.h b/include/uapi/asm-generic/fcntl.h index e063effe0cc1..04616a36f82a 100644 --- a/include/uapi/asm-generic/fcntl.h +++ b/include/uapi/asm-generic/fcntl.h @@ -142,7 +142,7 @@ * record locks, but are "owned" by the open file description, not the * process. This means that they are inherited across fork() like BSD (flock) * locks, and they are only released automatically when the last reference to - * the the open file against which they were acquired is put. + * the open file against which they were acquired is put. */ #define F_OFD_GETLK 36 #define F_OFD_SETLK 37 diff --git a/include/uapi/linux/android/binder.h b/include/uapi/linux/android/binder.h index 41420e341e75..92d7f52ddb10 100644 --- a/include/uapi/linux/android/binder.h +++ b/include/uapi/linux/android/binder.h @@ -266,7 +266,7 @@ enum binder_driver_return_protocol { BR_FAILED_REPLY = _IO('r', 17), /* - * The the last transaction (either a bcTRANSACTION or + * The last transaction (either a bcTRANSACTION or * a bcATTEMPT_ACQUIRE) failed (e.g. out of memory). No parameters. */ }; diff --git a/init/Kconfig b/init/Kconfig index dc24dec60232..5397983bc85c 100644 --- a/init/Kconfig +++ b/init/Kconfig @@ -876,8 +876,8 @@ config LOG_CPU_MAX_BUF_SHIFT used as it forces an exact (power of two) size of the ring buffer. The number of possible CPUs is used for this computation ignoring - hotplugging making the compuation optimal for the the worst case - scenerio while allowing a simple algorithm to be used from bootup. + hotplugging making the computation optimal for the worst case + scenario while allowing a simple algorithm to be used from bootup. Examples shift values and their meaning: 17 => 128 KB for each CPU diff --git a/init/main.c b/init/main.c index 2115055faeac..683d230aa564 100644 --- a/init/main.c +++ b/init/main.c @@ -504,7 +504,7 @@ asmlinkage __visible void __init start_kernel(void) debug_objects_early_init(); /* - * Set up the the initial canary ASAP: + * Set up the initial canary ASAP: */ boot_init_stack_canary(); diff --git a/kernel/jump_label.c b/kernel/jump_label.c index 9019f15deab2..6e82ca9e2735 100644 --- a/kernel/jump_label.c +++ b/kernel/jump_label.c @@ -17,7 +17,7 @@ #ifdef HAVE_JUMP_LABEL -/* mutex to protect coming/going of the the jump_label table */ +/* mutex to protect coming/going of the jump_label table */ static DEFINE_MUTEX(jump_label_mutex); void jump_label_lock(void) diff --git a/kernel/printk/printk.c b/kernel/printk/printk.c index 879edfc5ee52..c28d374307b1 100644 --- a/kernel/printk/printk.c +++ b/kernel/printk/printk.c @@ -2897,7 +2897,7 @@ EXPORT_SYMBOL_GPL(kmsg_dump_get_line); * @len: length of line placed into buffer * * Start at the end of the kmsg buffer and fill the provided buffer - * with as many of the the *youngest* kmsg records that fit into it. + * with as many of the *youngest* kmsg records that fit into it. * If the buffer is large enough, all available kmsg records will be * copied with a single call. * diff --git a/kernel/smp.c b/kernel/smp.c index 07854477c164..1af465316b19 100644 --- a/kernel/smp.c +++ b/kernel/smp.c @@ -641,7 +641,7 @@ EXPORT_SYMBOL(on_each_cpu_mask); * for all the required CPUs to finish. This may include the local * processor. * @cond_func: A callback function that is passed a cpu id and - * the the info parameter. The function is called + * the info parameter. The function is called * with preemption disabled. The function should * return a blooean value indicating whether to IPI * the specified CPU. diff --git a/kernel/time/timekeeping.c b/kernel/time/timekeeping.c index 946acb72179f..71c3e019103a 100644 --- a/kernel/time/timekeeping.c +++ b/kernel/time/timekeeping.c @@ -143,7 +143,7 @@ static void timekeeping_check_update(struct timekeeper *tk, cycle_t offset) printk_deferred(" timekeeping: Your kernel is sick, but tries to cope by capping time updates\n"); } else { if (offset > (max_cycles >> 1)) { - printk_deferred("INFO: timekeeping: Cycle offset (%lld) is larger than the the '%s' clock's 50%% safety margin (%lld)\n", + printk_deferred("INFO: timekeeping: Cycle offset (%lld) is larger than the '%s' clock's 50%% safety margin (%lld)\n", offset, name, max_cycles >> 1); printk_deferred(" timekeeping: Your kernel is still fine, but is feeling a bit nervous\n"); } diff --git a/kernel/trace/ring_buffer.c b/kernel/trace/ring_buffer.c index 0315d43176d8..c30179b361b0 100644 --- a/kernel/trace/ring_buffer.c +++ b/kernel/trace/ring_buffer.c @@ -2929,7 +2929,7 @@ rb_decrement_entry(struct ring_buffer_per_cpu *cpu_buffer, * This function lets the user discard an event in the ring buffer * and then that event will not be read later. * - * This function only works if it is called before the the item has been + * This function only works if it is called before the item has been * committed. It will try to free the event from the ring buffer * if another event has not been added behind it. * diff --git a/lib/Kconfig.debug b/lib/Kconfig.debug index 17670573dda8..d642228e5c3b 100644 --- a/lib/Kconfig.debug +++ b/lib/Kconfig.debug @@ -827,7 +827,7 @@ config PANIC_TIMEOUT int "panic timeout" default 0 help - Set the timeout value (in seconds) until a reboot occurs when the + Set the timeout value (in seconds) until a reboot occurs when the kernel panics. If n = 0, then we wait forever. A timeout value n > 0 will wait n seconds before rebooting, while a timeout value n < 0 will reboot immediately. diff --git a/lib/dynamic_queue_limits.c b/lib/dynamic_queue_limits.c index f346715e2255..3b9f82164f7d 100644 --- a/lib/dynamic_queue_limits.c +++ b/lib/dynamic_queue_limits.c @@ -60,7 +60,7 @@ void dql_completed(struct dql *dql, unsigned int count) * the whole interval (the check above). * * If there is slack, the amount of execess data queued above - * the the amount needed to prevent starvation, the queue limit + * the amount needed to prevent starvation, the queue limit * can be decreased. To avoid hysteresis we consider the * minimum amount of slack found over several iterations of the * completion routine. diff --git a/lib/earlycpio.c b/lib/earlycpio.c index 3eb3e4722b8e..9d4da0a6a6ed 100644 --- a/lib/earlycpio.c +++ b/lib/earlycpio.c @@ -50,7 +50,7 @@ enum cpio_fields { /** * cpio_data find_cpio_data - Search for files in an uncompressed cpio * @path: The directory to search for, including a slash at the end - * @data: Pointer to the the cpio archive or a header inside + * @data: Pointer to the cpio archive or a header inside * @len: Remaining length of the cpio based on data pointer * @nextoff: When a matching file is found, this is the offset from the * beginning of the cpio to the beginning of the next file, not the diff --git a/lib/syscall.c b/lib/syscall.c index e30e03932480..624d80430969 100644 --- a/lib/syscall.c +++ b/lib/syscall.c @@ -31,7 +31,7 @@ static int collect_syscall(struct task_struct *target, long *callno, * @pc: filled with user PC * * If @target is blocked in a system call, returns zero with *@callno - * set to the the call's number and @args filled in with its arguments. + * set to the call's number and @args filled in with its arguments. * Registers not used for system call arguments may not be available and * it is not kosher to use &struct user_regset calls while the system * call is still in progress. Note we may get this result if @target diff --git a/mm/hugetlb.c b/mm/hugetlb.c index 271e4432734c..d05f33efcf70 100644 --- a/mm/hugetlb.c +++ b/mm/hugetlb.c @@ -1412,7 +1412,7 @@ static void return_unused_surplus_pages(struct hstate *h, * evenly across all nodes with memory. Iterate across these nodes * until we can no longer free unreserved surplus pages. This occurs * when the nodes with surplus pages have no free pages. - * free_pool_huge_page() will balance the the freed pages across the + * free_pool_huge_page() will balance the freed pages across the * on-line nodes with memory and will handle the hstate accounting. */ while (nr_pages--) { diff --git a/mm/page_alloc.c b/mm/page_alloc.c index ebffa0e4a9c0..33c34fb38700 100644 --- a/mm/page_alloc.c +++ b/mm/page_alloc.c @@ -4294,7 +4294,7 @@ static int zone_batchsize(struct zone *zone) * locking. * * Any new users of pcp->batch and pcp->high should ensure they can cope with - * those fields changing asynchronously (acording the the above rule). + * those fields changing asynchronously (according to the above rule). * * mutex_is_locked(&pcp_batch_high_lock) required when calling this function * outside of boot time (or some other assurance that no concurrent updaters diff --git a/net/bluetooth/hci_conn.c b/net/bluetooth/hci_conn.c index ee5e59839b02..f0de3d20e304 100644 --- a/net/bluetooth/hci_conn.c +++ b/net/bluetooth/hci_conn.c @@ -993,7 +993,7 @@ static int hci_conn_auth(struct hci_conn *conn, __u8 sec_level, __u8 auth_type) return 0; } -/* Encrypt the the link */ +/* Encrypt the link */ static void hci_conn_encrypt(struct hci_conn *conn) { BT_DBG("hcon %p", conn); diff --git a/net/bluetooth/hci_core.c b/net/bluetooth/hci_core.c index 476709bd068a..342ef7fbccbf 100644 --- a/net/bluetooth/hci_core.c +++ b/net/bluetooth/hci_core.c @@ -801,7 +801,7 @@ static void hci_init4_req(struct hci_request *req, unsigned long opt) * Delete Stored Link Key command. They are clearly indicating its * absence in the bit mask of supported commands. * - * Check the supported commands and only if the the command is marked + * Check the supported commands and only if the command is marked * as supported send it. If not supported assume that the controller * does not have actual support for stored link keys which makes this * command redundant anyway. diff --git a/net/ethernet/eth.c b/net/ethernet/eth.c index f3bad41d725f..2de5e4914bc1 100644 --- a/net/ethernet/eth.c +++ b/net/ethernet/eth.c @@ -113,7 +113,7 @@ int eth_header(struct sk_buff *skb, struct net_device *dev, EXPORT_SYMBOL(eth_header); /** - * eth_get_headlen - determine the the length of header for an ethernet frame + * eth_get_headlen - determine the length of header for an ethernet frame * @data: pointer to start of frame * @len: total length of frame * diff --git a/net/sctp/associola.c b/net/sctp/associola.c index 197c3f59ecbf..545f842eb4ab 100644 --- a/net/sctp/associola.c +++ b/net/sctp/associola.c @@ -1347,7 +1347,7 @@ static void sctp_select_active_and_retran_path(struct sctp_association *asoc) } /* We did not find anything useful for a possible retransmission - * path; either primary path that we found is the the same as + * path; either primary path that we found is the same as * the current one, or we didn't generally find an active one. */ if (trans_sec == NULL) diff --git a/net/sctp/chunk.c b/net/sctp/chunk.c index a3380917f197..a31060a7f3cc 100644 --- a/net/sctp/chunk.c +++ b/net/sctp/chunk.c @@ -200,7 +200,7 @@ struct sctp_datamsg *sctp_datamsg_from_user(struct sctp_association *asoc, sizeof(struct sctphdr) - sizeof(struct sctp_data_chunk)) & ~3; max = asoc->frag_point; - /* If the the peer requested that we authenticate DATA chunks + /* If the peer requested that we authenticate DATA chunks * we need to account for bundling of the AUTH chunks along with * DATA. */ diff --git a/net/sunrpc/auth_generic.c b/net/sunrpc/auth_generic.c index 41248b1820c7..507ee9d91bd1 100644 --- a/net/sunrpc/auth_generic.c +++ b/net/sunrpc/auth_generic.c @@ -190,7 +190,7 @@ void rpc_destroy_generic_auth(void) } /* - * Test the the current time (now) against the underlying credential key expiry + * Test the current time (now) against the underlying credential key expiry * minus a timeout and setup notification. * * The normal case: diff --git a/net/wimax/op-rfkill.c b/net/wimax/op-rfkill.c index 7d730543f243..53d5e7a8753b 100644 --- a/net/wimax/op-rfkill.c +++ b/net/wimax/op-rfkill.c @@ -135,7 +135,7 @@ EXPORT_SYMBOL_GPL(wimax_report_rfkill_hw); * @state: New state of the RF kill switch. %WIMAX_RF_ON radio on, * %WIMAX_RF_OFF radio off. * - * Reports changes in the software RF switch state to the the WiMAX + * Reports changes in the software RF switch state to the WiMAX * stack. * * The main use is during initialization, so the driver can query the diff --git a/scripts/coccinelle/misc/badty.cocci b/scripts/coccinelle/misc/badty.cocci index 2fc06fc71927..7bde383f577b 100644 --- a/scripts/coccinelle/misc/badty.cocci +++ b/scripts/coccinelle/misc/badty.cocci @@ -3,7 +3,7 @@ //# This makes an effort to find cases where the argument to sizeof is wrong //# in memory allocation functions by checking the type of the allocated memory //# when it is a double pointer and ensuring the sizeof argument takes a pointer -//# to the the memory being allocated. There are false positives in cases the +//# to the memory being allocated. There are false positives in cases the //# sizeof argument is not used in constructing the return value. The result //# may need some reformatting. // diff --git a/scripts/tracing/draw_functrace.py b/scripts/tracing/draw_functrace.py index db40fa04cd51..9eb8c74b69a1 100755 --- a/scripts/tracing/draw_functrace.py +++ b/scripts/tracing/draw_functrace.py @@ -8,7 +8,7 @@ This script parses a trace provided by the function tracer in kernel/trace/trace_functions.c The resulted trace is processed into a tree to produce a more human view of the call stack by drawing textual but hierarchical tree of -calls. Only the functions's names and the the call time are provided. +calls. Only the functions's names and the call time are provided. Usage: Be sure that you have CONFIG_FUNCTION_TRACER diff --git a/security/apparmor/context.c b/security/apparmor/context.c index 3064c6ced87c..7b9769e7985a 100644 --- a/security/apparmor/context.c +++ b/security/apparmor/context.c @@ -13,7 +13,7 @@ * License. * * - * AppArmor sets confinement on every task, via the the aa_task_cxt and + * AppArmor sets confinement on every task, via the aa_task_cxt and * the aa_task_cxt.profile, both of which are required and are not allowed * to be NULL. The aa_task_cxt is not reference counted and is unique * to each cred (which is reference count). The profile pointed to by diff --git a/security/keys/keyctl.c b/security/keys/keyctl.c index 0b9ec78a7a7a..9f7bba09a692 100644 --- a/security/keys/keyctl.c +++ b/security/keys/keyctl.c @@ -478,7 +478,7 @@ error: * keyring, otherwise replace the link to the matching key with a link to the * new key. * - * The key must grant the caller Link permission and the the keyring must grant + * The key must grant the caller Link permission and the keyring must grant * the caller Write permission. Furthermore, if an additional link is created, * the keyring's quota will be extended. * diff --git a/sound/pci/hda/hda_codec.c b/sound/pci/hda/hda_codec.c index e70a7fb393dd..945cdd8aae87 100644 --- a/sound/pci/hda/hda_codec.c +++ b/sound/pci/hda/hda_codec.c @@ -3922,7 +3922,7 @@ EXPORT_SYMBOL_GPL(snd_hda_set_power_save); * @nid: NID to check / update * * Check whether the given NID is in the amp list. If it's in the list, - * check the current AMP status, and update the the power-status according + * check the current AMP status, and update the power-status according * to the mute status. * * This function is supposed to be set or called from the check_power_status diff --git a/sound/pci/hda/hda_generic.c b/sound/pci/hda/hda_generic.c index 3d2597b7037b..a56718dafeea 100644 --- a/sound/pci/hda/hda_generic.c +++ b/sound/pci/hda/hda_generic.c @@ -822,7 +822,7 @@ static void activate_amp_in(struct hda_codec *codec, struct nid_path *path, } } -/* sync power of each widget in the the given path */ +/* sync power of each widget in the given path */ static hda_nid_t path_power_update(struct hda_codec *codec, struct nid_path *path, bool allow_powerdown) diff --git a/sound/pci/hda/patch_sigmatel.c b/sound/pci/hda/patch_sigmatel.c index 43c99ce4a520..f9052d0cd432 100644 --- a/sound/pci/hda/patch_sigmatel.c +++ b/sound/pci/hda/patch_sigmatel.c @@ -859,7 +859,7 @@ static int stac_auto_create_beep_ctls(struct hda_codec *codec, static struct snd_kcontrol_new beep_vol_ctl = HDA_CODEC_VOLUME(NULL, 0, 0, 0); - /* check for mute support for the the amp */ + /* check for mute support for the amp */ if ((caps & AC_AMPCAP_MUTE) >> AC_AMPCAP_MUTE_SHIFT) { const struct snd_kcontrol_new *temp; if (spec->anabeep_nid == nid) diff --git a/sound/pci/ice1712/prodigy192.c b/sound/pci/ice1712/prodigy192.c index 3919aed39ca0..5e52086d7b98 100644 --- a/sound/pci/ice1712/prodigy192.c +++ b/sound/pci/ice1712/prodigy192.c @@ -31,7 +31,7 @@ * Experimentally I found out that only a combination of * OCKS0=1, OCKS1=1 (128fs, 64fs output) and ice1724 - * VT1724_MT_I2S_MCLK_128X=0 (256fs input) yields correct - * sampling rate. That means the the FPGA doubles the + * sampling rate. That means that the FPGA doubles the * MCK01 rate. * * Copyright (c) 2003 Takashi Iwai diff --git a/sound/soc/codecs/wm9713.c b/sound/soc/codecs/wm9713.c index 79552953e1bd..ec5624bf1e13 100644 --- a/sound/soc/codecs/wm9713.c +++ b/sound/soc/codecs/wm9713.c @@ -725,7 +725,7 @@ static void pll_factors(struct snd_soc_codec *codec, u64 Kpart; unsigned int K, Ndiv, Nmod, target; - /* The the PLL output is always 98.304MHz. */ + /* The PLL output is always 98.304MHz. */ target = 98304000; /* If the input frequency is over 14.4MHz then scale it down. */ diff --git a/sound/soc/fsl/fsl_dma.c b/sound/soc/fsl/fsl_dma.c index 93d7e56c6066..37100b38b377 100644 --- a/sound/soc/fsl/fsl_dma.c +++ b/sound/soc/fsl/fsl_dma.c @@ -157,7 +157,7 @@ static void fsl_dma_abort_stream(struct snd_pcm_substream *substream) /** * fsl_dma_update_pointers - update LD pointers to point to the next period * - * As each period is completed, this function changes the the link + * As each period is completed, this function changes the link * descriptor pointers for that period to point to the next period. */ static void fsl_dma_update_pointers(struct fsl_dma_private *dma_private) diff --git a/sound/sparc/dbri.c b/sound/sparc/dbri.c index 0190cb6332f2..635b5cc6b56d 100644 --- a/sound/sparc/dbri.c +++ b/sound/sparc/dbri.c @@ -615,7 +615,7 @@ A circular command buffer is used here. A new command is being added while another can be executed. The scheme works by adding two WAIT commands after each sent batch of commands. When the next batch is prepared it is added after the WAIT commands then the WAITs are replaced with single JUMP -command to the new batch. The the DBRI is forced to reread the last WAIT +command to the new batch. The DBRI is forced to reread the last WAIT command (replaced by the JUMP by then). If the DBRI is still executing previous commands the request to reread the WAIT command is ignored. diff --git a/tools/perf/Documentation/perf-diff.txt b/tools/perf/Documentation/perf-diff.txt index d1deb573877f..11e718d6510c 100644 --- a/tools/perf/Documentation/perf-diff.txt +++ b/tools/perf/Documentation/perf-diff.txt @@ -204,7 +204,7 @@ If specified the 'Weighted diff' column is displayed with value 'd' computed as: - period being the hist entry period value - - WEIGHT-A/WEIGHT-B being user supplied weights in the the '-c' option + - WEIGHT-A/WEIGHT-B being user supplied weights in the '-c' option behind ':' separator like '-c wdiff:1,2'. - WEIGHT-A being the weight of the data file - WEIGHT-B being the weight of the baseline data file diff --git a/tools/thermal/tmon/pid.c b/tools/thermal/tmon/pid.c index fd7e9e9d6f4a..1aa7faa0e0e0 100644 --- a/tools/thermal/tmon/pid.c +++ b/tools/thermal/tmon/pid.c @@ -38,7 +38,7 @@ /************************************************************************** * PID (Proportional-Integral-Derivative) controller is commonly used in - * linear control system, consider the the process. + * linear control system, consider the process. * G(s) = U(s)/E(s) * kp = proportional gain * ki = integral gain -- 2.1.0 -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/