Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1754616AbbDTHrA (ORCPT ); Mon, 20 Apr 2015 03:47:00 -0400 Received: from mail-wi0-f169.google.com ([209.85.212.169]:35245 "EHLO mail-wi0-f169.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1754084AbbDTHp5 (ORCPT ); Mon, 20 Apr 2015 03:45:57 -0400 From: "Ivan T. Ivanov" To: Kumar Gala Cc: Rob Herring , Pawel Moll , Mark Rutland , Ian Campbell , Russell King , Catalin Marinas , Will Deacon , devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org, linux-arm-msm@vger.kernel.org Subject: [PATCH v2 5/7] arm64: dts: qcom: Add 8x16 chipset SPMI PMIC's nodes Date: Mon, 20 Apr 2015 10:45:39 +0300 Message-Id: <1429515941-15334-6-git-send-email-ivan.ivanov@linaro.org> X-Mailer: git-send-email 1.9.1 In-Reply-To: <1429515941-15334-1-git-send-email-ivan.ivanov@linaro.org> References: <1429515941-15334-1-git-send-email-ivan.ivanov@linaro.org> Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 4186 Lines: 160 PM9816 has 2 SPMI devices per physical package. Add PMIC configuration nodes including sub-function device nodes and include them in boards, which are using 8x16 based chipset. PM9816 sub-function devices include: * GPIO block, with 4 pins * MPP block, with 4 pins * Volatage ADC (VADC), with multiple inputs * Thermal sensor device, which is using on chip VADC channel report PMIC die temperature. * Power key device, which is responsible for clean system reboot or shutdown * RTC device Signed-off-by: Ivan T. Ivanov --- arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi | 1 + arch/arm64/boot/dts/qcom/msm8916-mtp.dtsi | 1 + arch/arm64/boot/dts/qcom/pm8916.dtsi | 99 +++++++++++++++++++++++++++++++ 3 files changed, 101 insertions(+) create mode 100644 arch/arm64/boot/dts/qcom/pm8916.dtsi diff --git a/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi b/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi index 703a4f1..58f0055f 100644 --- a/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi +++ b/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi @@ -12,6 +12,7 @@ */ #include "msm8916.dtsi" +#include "pm8916.dtsi" / { aliases { diff --git a/arch/arm64/boot/dts/qcom/msm8916-mtp.dtsi b/arch/arm64/boot/dts/qcom/msm8916-mtp.dtsi index bea871b..a1aa0b2 100644 --- a/arch/arm64/boot/dts/qcom/msm8916-mtp.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8916-mtp.dtsi @@ -12,6 +12,7 @@ */ #include "msm8916.dtsi" +#include "pm8916.dtsi" / { aliases { diff --git a/arch/arm64/boot/dts/qcom/pm8916.dtsi b/arch/arm64/boot/dts/qcom/pm8916.dtsi new file mode 100644 index 0000000..b222ece --- /dev/null +++ b/arch/arm64/boot/dts/qcom/pm8916.dtsi @@ -0,0 +1,99 @@ +#include +#include +#include + +&spmi_bus { + + usid0: pm8916@0 { + compatible = "qcom,spmi-pmic"; + reg = <0x0 SPMI_USID>; + #address-cells = <1>; + #size-cells = <0>; + + rtc@6000 { + compatible = "qcom,pm8941-rtc"; + reg = <0x6000 0x6100>; + reg-names = "rtc", "alarm"; + interrupts = <0x0 0x61 0x1 IRQ_TYPE_EDGE_RISING>; + }; + + pwrkey@800 { + compatible = "qcom,pm8941-pwrkey"; + reg = <0x800>; + interrupts = <0x0 0x8 0 IRQ_TYPE_EDGE_BOTH>; + debounce = <15625>; + bias-pull-up; + }; + + pm8916_gpios: gpios@c000 { + compatible = "qcom,pm8916-gpio"; + reg = <0xc000 0x400>; + gpio-controller; + #gpio-cells = <2>; + interrupts = <0 0xc0 0 IRQ_TYPE_NONE>, + <0 0xc1 0 IRQ_TYPE_NONE>, + <0 0xc2 0 IRQ_TYPE_NONE>, + <0 0xc3 0 IRQ_TYPE_NONE>; + }; + + pm8916_mpps: mpps@a000 { + compatible = "qcom,pm8916-mpp"; + reg = <0xa000 0x400>; + gpio-controller; + #gpio-cells = <2>; + interrupts = <0 0xa0 0 IRQ_TYPE_NONE>, + <0 0xa1 0 IRQ_TYPE_NONE>, + <0 0xa2 0 IRQ_TYPE_NONE>, + <0 0xa3 0 IRQ_TYPE_NONE>; + }; + + pm8916_temp: temp-alarm@2400 { + compatible = "qcom,spmi-temp-alarm"; + reg = <0x2400 0x100>; + interrupts = <0 0x24 0 IRQ_TYPE_EDGE_RISING>; + io-channels = <&pm8916_vadc VADC_DIE_TEMP>; + io-channel-names = "thermal"; + #thermal-sensor-cells = <0>; + }; + + pm8916_vadc: vadc@3100 { + compatible = "qcom,spmi-vadc"; + reg = <0x3100 0x100>; + interrupts = <0x0 0x31 0x0 IRQ_TYPE_EDGE_RISING>; + #address-cells = <1>; + #size-cells = <0>; + #io-channel-cells = <1>; + + usb_in { + reg = ; + qcom,pre-scaling = <1 10>; + }; + vph_pwr { + reg = ; + qcom,pre-scaling = <1 3>; + }; + die_temp { + reg = ; + }; + ref_625mv { + reg = ; + }; + ref_1250v { + reg = ; + }; + ref_gnd { + reg = ; + }; + ref_vdd { + reg = ; + }; + }; + }; + + usid1: pm8916@1 { + compatible = "qcom,spmi-pmic"; + reg = <0x1 SPMI_USID>; + #address-cells = <1>; + #size-cells = <0>; + }; +}; -- 1.9.1 -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/