Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S932840AbbDUPf4 (ORCPT ); Tue, 21 Apr 2015 11:35:56 -0400 Received: from youngberry.canonical.com ([91.189.89.112]:57836 "EHLO youngberry.canonical.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S932744AbbDUPfc (ORCPT ); Tue, 21 Apr 2015 11:35:32 -0400 From: Luis Henriques To: linux-kernel@vger.kernel.org, stable@vger.kernel.org, kernel-team@lists.ubuntu.com Cc: Tomas Henzl , Christoph Hellwig , Masoud Sharbiani , Vinson Lee , Luis Henriques Subject: [PATCH 3.16.y-ckt 137/144] hpsa: refine the pci enable/disable handling Date: Tue, 21 Apr 2015 16:32:02 +0100 Message-Id: <1429630329-21748-138-git-send-email-luis.henriques@canonical.com> X-Mailer: git-send-email 1.9.1 In-Reply-To: <1429630329-21748-1-git-send-email-luis.henriques@canonical.com> References: <1429630329-21748-1-git-send-email-luis.henriques@canonical.com> X-Extended-Stable: 3.16 Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 4278 Lines: 123 3.16.7-ckt10 -stable review patch. If anyone has any objections, please let me know. ------------------ From: Tomas Henzl commit 132aa220b45d60e9b20def1e9d8be9422eed9616 upstream. When a second(kdump) kernel starts and the hard reset method is used the driver calls pci_disable_device without previously enabling it, so the kernel shows a warning - [ 16.876248] WARNING: at drivers/pci/pci.c:1431 pci_disable_device+0x84/0x90() [ 16.882686] Device hpsa disabling already-disabled device ... This patch fixes it, in addition to this I tried to balance also some other pairs of enable/disable device in the driver. Unfortunately I wasn't able to verify the functionality for the case of a sw reset, because of a lack of proper hw. Signed-off-by: Tomas Henzl Reviewed-by: Stephen M. Cameron Signed-off-by: Christoph Hellwig Cc: Masoud Sharbiani Cc: Vinson Lee Signed-off-by: Luis Henriques --- drivers/scsi/hpsa.c | 42 ++++++++++++++++++++++++++++-------------- 1 file changed, 28 insertions(+), 14 deletions(-) diff --git a/drivers/scsi/hpsa.c b/drivers/scsi/hpsa.c index 489e83b6b5e1..67a8dfd9b3f5 100644 --- a/drivers/scsi/hpsa.c +++ b/drivers/scsi/hpsa.c @@ -5972,10 +5972,6 @@ static int hpsa_kdump_hard_reset_controller(struct pci_dev *pdev) /* Save the PCI command register */ pci_read_config_word(pdev, 4, &command_register); - /* Turn the board off. This is so that later pci_restore_state() - * won't turn the board on before the rest of config space is ready. - */ - pci_disable_device(pdev); pci_save_state(pdev); /* find the first memory BAR, so we can find the cfg table */ @@ -6023,11 +6019,6 @@ static int hpsa_kdump_hard_reset_controller(struct pci_dev *pdev) goto unmap_cfgtable; pci_restore_state(pdev); - rc = pci_enable_device(pdev); - if (rc) { - dev_warn(&pdev->dev, "failed to enable device.\n"); - goto unmap_cfgtable; - } pci_write_config_word(pdev, 4, command_register); /* Some devices (notably the HP Smart Array 5i Controller) @@ -6542,6 +6533,23 @@ static int hpsa_init_reset_devices(struct pci_dev *pdev) if (!reset_devices) return 0; + /* kdump kernel is loading, we don't know in which state is + * the pci interface. The dev->enable_cnt is equal zero + * so we call enable+disable, wait a while and switch it on. + */ + rc = pci_enable_device(pdev); + if (rc) { + dev_warn(&pdev->dev, "Failed to enable PCI device\n"); + return -ENODEV; + } + pci_disable_device(pdev); + msleep(260); /* a randomly chosen number */ + rc = pci_enable_device(pdev); + if (rc) { + dev_warn(&pdev->dev, "failed to enable device.\n"); + return -ENODEV; + } + /* Reset the controller with a PCI power-cycle or via doorbell */ rc = hpsa_kdump_hard_reset_controller(pdev); @@ -6550,10 +6558,11 @@ static int hpsa_init_reset_devices(struct pci_dev *pdev) * "performant mode". Or, it might be 640x, which can't reset * due to concerns about shared bbwc between 6402/6404 pair. */ - if (rc == -ENOTSUPP) - return rc; /* just try to do the kdump anyhow. */ - if (rc) - return -ENODEV; + if (rc) { + if (rc != -ENOTSUPP) /* just try to do the kdump anyhow. */ + rc = -ENODEV; + goto out_disable; + } /* Now try to get the controller to respond to a no-op */ dev_warn(&pdev->dev, "Waiting for controller to respond to no-op\n"); @@ -6564,7 +6573,11 @@ static int hpsa_init_reset_devices(struct pci_dev *pdev) dev_warn(&pdev->dev, "no-op failed%s\n", (i < 11 ? "; re-trying" : "")); } - return 0; + +out_disable: + + pci_disable_device(pdev); + return rc; } static int hpsa_allocate_cmd_pool(struct ctlr_info *h) @@ -6744,6 +6757,7 @@ static void hpsa_undo_allocations_after_kdump_soft_reset(struct ctlr_info *h) iounmap(h->transtable); if (h->cfgtable) iounmap(h->cfgtable); + pci_disable_device(h->pdev); pci_release_regions(h->pdev); kfree(h); } -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/