Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1758255AbbDWDA7 (ORCPT ); Wed, 22 Apr 2015 23:00:59 -0400 Received: from mail-pd0-f180.google.com ([209.85.192.180]:36383 "EHLO mail-pd0-f180.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1756002AbbDWDAx (ORCPT ); Wed, 22 Apr 2015 23:00:53 -0400 From: Brian Norris To: Tejun Heo , Kishon Vijay Abraham I Cc: Rob Herring , Pawel Moll , Mark Rutland , Ian Campbell , Kumar Gala , Brian Norris , Gregory Fong , Florian Fainelli , devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org, linux-ide@vger.kernel.org, Hans de Goede , Subject: [PATCH v2 3/5] ata: add Broadcom AHCI SATA3 driver for STB chips Date: Wed, 22 Apr 2015 19:59:08 -0700 Message-Id: <1429757950-28789-4-git-send-email-computersforpeace@gmail.com> X-Mailer: git-send-email 1.9.1 In-Reply-To: <1429757950-28789-1-git-send-email-computersforpeace@gmail.com> References: <1429757950-28789-1-git-send-email-computersforpeace@gmail.com> MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 10089 Lines: 354 Pretty straightforward driver, using the nice library-ization of the generic ahci_platform driver. Signed-off-by: Brian Norris --- v2: - move port enabling into this driver, since the affected registers are in the SATA_TOP_CTRL block. This means we need to check for the implemented port(s) here. - fix up layering issues with using drvdata (libata expects to use drvdata), similar to this issue: http://marc.info/?l=linux-ide&m=142851961920009&w=2 - trivial fixups drivers/ata/Kconfig | 9 ++ drivers/ata/Makefile | 1 + drivers/ata/sata_brcmstb.c | 285 +++++++++++++++++++++++++++++++++++++++++++++ 3 files changed, 295 insertions(+) create mode 100644 drivers/ata/sata_brcmstb.c diff --git a/drivers/ata/Kconfig b/drivers/ata/Kconfig index 5f601553b9b0..33d4b3031705 100644 --- a/drivers/ata/Kconfig +++ b/drivers/ata/Kconfig @@ -98,6 +98,15 @@ config SATA_AHCI_PLATFORM If unsure, say N. +config SATA_BRCMSTB + tristate "Broadcom STB AHCI SATA support" + depends on ARCH_BRCMSTB + help + This option enables support for the AHCI SATA3 controller found on + STB SoC's. + + If unsure, say N. + config AHCI_DA850 tristate "DaVinci DA850 AHCI SATA support" depends on ARCH_DAVINCI_DA850 diff --git a/drivers/ata/Makefile b/drivers/ata/Makefile index ae41107afc1f..5d1e6a96bc93 100644 --- a/drivers/ata/Makefile +++ b/drivers/ata/Makefile @@ -5,6 +5,7 @@ obj-$(CONFIG_ATA) += libata.o obj-$(CONFIG_SATA_AHCI) += ahci.o libahci.o obj-$(CONFIG_SATA_ACARD_AHCI) += acard-ahci.o libahci.o obj-$(CONFIG_SATA_AHCI_PLATFORM) += ahci_platform.o libahci.o libahci_platform.o +obj-$(CONFIG_SATA_BRCMSTB) += sata_brcmstb.o libahci.o libahci_platform.o obj-$(CONFIG_SATA_FSL) += sata_fsl.o obj-$(CONFIG_SATA_INIC162X) += sata_inic162x.o obj-$(CONFIG_SATA_SIL24) += sata_sil24.o diff --git a/drivers/ata/sata_brcmstb.c b/drivers/ata/sata_brcmstb.c new file mode 100644 index 000000000000..ab8d2261fa96 --- /dev/null +++ b/drivers/ata/sata_brcmstb.c @@ -0,0 +1,285 @@ +/* + * Broadcom SATA3 AHCI Controller Driver + * + * Copyright © 2009-2015 Broadcom Corporation + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "ahci.h" + +#define DRV_NAME "brcm-ahci" + +#define SATA_TOP_CTRL_VERSION 0x0 +#define SATA_TOP_CTRL_BUS_CTRL 0x4 +#define SATA_TOP_CTRL_TP_CTRL 0x8 +#define SATA_TOP_CTRL_PHY_CTRL 0xc + #define SATA_TOP_CTRL_PHY_CTRL_1 0x0 + #define SATA_TOP_CTRL_1_PHY_DEFAULT_POWER_STATE BIT(14) + #define SATA_TOP_CTRL_PHY_CTRL_2 0x4 + #define SATA_TOP_CTRL_2_SW_RST_MDIOREG BIT(0) + #define SATA_TOP_CTRL_2_SW_RST_OOB BIT(1) + #define SATA_TOP_CTRL_2_SW_RST_RX BIT(2) + #define SATA_TOP_CTRL_2_SW_RST_TX BIT(3) + #define SATA_TOP_CTRL_2_PHY_GLOBAL_RESET BIT(14) + #define SATA_TOP_CTRL_PHY_OFFS 0x8 + #define SATA_TOP_MAX_PHYS 2 +#define SATA_TOP_CTRL_SATA_TP_OUT 0x1c +#define SATA_TOP_CTRL_CLIENT_INIT_CTRL 0x20 + +#ifdef __BIG_ENDIAN +#define DATA_ENDIAN 2 /* AHCI->DDR inbound accesses */ +#define MMIO_ENDIAN 2 /* CPU->AHCI outbound accesses */ +#else +#define DATA_ENDIAN 0 +#define MMIO_ENDIAN 0 +#endif + +struct brcm_ahci_priv { + struct device *dev; + void __iomem *top_ctrl; + u32 port_mask; +}; + +static const struct ata_port_info ahci_brcm_port_info = { + .flags = AHCI_FLAG_COMMON, + .pio_mask = ATA_PIO4, + .udma_mask = ATA_UDMA6, + .port_ops = &ahci_platform_ops, +}; + +static void brcm_sata_phy_enable(struct brcm_ahci_priv *priv, int port) +{ + void __iomem *phyctrl = priv->top_ctrl + SATA_TOP_CTRL_PHY_CTRL + + (port * SATA_TOP_CTRL_PHY_OFFS); + void __iomem *p; + u32 reg; + + /* clear PHY_DEFAULT_POWER_STATE */ + p = phyctrl + SATA_TOP_CTRL_PHY_CTRL_1; + reg = __raw_readl(p); + reg &= ~SATA_TOP_CTRL_1_PHY_DEFAULT_POWER_STATE; + __raw_writel(reg, p); + + /* reset the PHY digital logic */ + p = phyctrl + SATA_TOP_CTRL_PHY_CTRL_2; + reg = __raw_readl(p); + reg &= ~(SATA_TOP_CTRL_2_SW_RST_MDIOREG | SATA_TOP_CTRL_2_SW_RST_OOB | + SATA_TOP_CTRL_2_SW_RST_RX); + reg |= SATA_TOP_CTRL_2_SW_RST_TX; + __raw_writel(reg, p); + reg = __raw_readl(p); + reg |= SATA_TOP_CTRL_2_PHY_GLOBAL_RESET; + __raw_writel(reg, p); + reg = __raw_readl(p); + reg &= ~SATA_TOP_CTRL_2_PHY_GLOBAL_RESET; + __raw_writel(reg, p); + (void)__raw_readl(p); +} + +static void brcm_sata_phy_disable(struct brcm_ahci_priv *priv, int port) +{ + void __iomem *phyctrl = priv->top_ctrl + SATA_TOP_CTRL_PHY_CTRL + + (port * SATA_TOP_CTRL_PHY_OFFS); + void __iomem *p; + u32 reg; + + /* power-off the PHY digital logic */ + p = phyctrl + SATA_TOP_CTRL_PHY_CTRL_2; + reg = __raw_readl(p); + reg |= (SATA_TOP_CTRL_2_SW_RST_MDIOREG | SATA_TOP_CTRL_2_SW_RST_OOB | + SATA_TOP_CTRL_2_SW_RST_RX | SATA_TOP_CTRL_2_SW_RST_TX | + SATA_TOP_CTRL_2_PHY_GLOBAL_RESET); + __raw_writel(reg, p); + + /* set PHY_DEFAULT_POWER_STATE */ + p = phyctrl + SATA_TOP_CTRL_PHY_CTRL_1; + reg = __raw_readl(p); + reg |= SATA_TOP_CTRL_1_PHY_DEFAULT_POWER_STATE; + __raw_writel(reg, p); +} + +static void brcm_sata_phys_enable(struct brcm_ahci_priv *priv) +{ + int i; + + for (i = 0; i < SATA_TOP_MAX_PHYS; i++) + if (priv->port_mask & BIT(i)) + brcm_sata_phy_enable(priv, i); +} + +static void brcm_sata_phys_disable(struct brcm_ahci_priv *priv) +{ + int i; + + for (i = 0; i < SATA_TOP_MAX_PHYS; i++) + if (priv->port_mask & BIT(i)) + brcm_sata_phy_disable(priv, i); +} + +static u32 brcm_ahci_get_portmask(struct platform_device *pdev, + struct brcm_ahci_priv *priv) +{ + void __iomem *ahci; + struct resource *res; + u32 impl; + + res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "ahci"); + ahci = devm_ioremap_resource(&pdev->dev, res); + if (IS_ERR(ahci)) + return 0; + + impl = readl(ahci + HOST_PORTS_IMPL); + + if (fls(impl) > SATA_TOP_MAX_PHYS) + dev_warn(priv->dev, "warning: more ports than PHYs (%#x)\n", + impl); + else if (!impl) + dev_info(priv->dev, "no ports found\n"); + + devm_iounmap(&pdev->dev, ahci); + devm_release_mem_region(&pdev->dev, res->start, resource_size(res)); + + return impl; +} + +static void brcm_sata_init(struct brcm_ahci_priv *priv) +{ + /* Configure endianness */ + __raw_writel((DATA_ENDIAN << 4) | (DATA_ENDIAN << 2) | + (MMIO_ENDIAN << 0), + priv->top_ctrl + SATA_TOP_CTRL_BUS_CTRL); +} + +static int brcm_ahci_suspend(struct device *dev) +{ + struct ata_host *host = dev_get_drvdata(dev); + struct ahci_host_priv *hpriv = host->private_data; + struct brcm_ahci_priv *priv = hpriv->plat_data; + int ret; + + ret = ahci_platform_suspend(dev); + brcm_sata_phys_disable(priv); + return ret; +} + +static int brcm_ahci_resume(struct device *dev) +{ + struct ata_host *host = dev_get_drvdata(dev); + struct ahci_host_priv *hpriv = host->private_data; + struct brcm_ahci_priv *priv = hpriv->plat_data; + + brcm_sata_init(priv); + brcm_sata_phys_enable(priv); + return ahci_platform_resume(dev); +} + +static struct scsi_host_template ahci_platform_sht = { + AHCI_SHT(DRV_NAME), +}; + +static int brcm_ahci_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct brcm_ahci_priv *priv; + struct ahci_host_priv *hpriv; + struct resource *res; + int ret; + + priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL); + if (!priv) + return -ENOMEM; + priv->dev = dev; + + res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "top-ctrl"); + priv->top_ctrl = devm_ioremap_resource(dev, res); + if (IS_ERR(priv->top_ctrl)) + return PTR_ERR(priv->top_ctrl); + + brcm_sata_init(priv); + + priv->port_mask = brcm_ahci_get_portmask(pdev, priv); + if (!priv->port_mask) + return -ENODEV; + + brcm_sata_phys_enable(priv); + + hpriv = ahci_platform_get_resources(pdev); + if (IS_ERR(hpriv)) + return PTR_ERR(hpriv); + hpriv->plat_data = priv; + + ret = ahci_platform_enable_resources(hpriv); + if (ret) + return ret; + + ret = ahci_platform_init_host(pdev, hpriv, &ahci_brcm_port_info, + &ahci_platform_sht); + if (ret) + return ret; + + dev_info(dev, "Broadcom AHCI SATA3 registered\n"); + + return 0; +} + +static int brcm_ahci_remove(struct platform_device *pdev) +{ + struct ata_host *host = dev_get_drvdata(&pdev->dev); + struct ahci_host_priv *hpriv = host->private_data; + struct brcm_ahci_priv *priv = hpriv->plat_data; + int ret; + + ret = ata_platform_remove_one(pdev); + if (ret) + return ret; + + brcm_sata_phys_disable(priv); + + return 0; +} + +static const struct of_device_id ahci_of_match[] = { + {.compatible = "brcm,sata3-ahci"}, + {}, +}; +MODULE_DEVICE_TABLE(of, ahci_of_match); + +static SIMPLE_DEV_PM_OPS(ahci_brcm_pm_ops, brcm_ahci_suspend, brcm_ahci_resume); + +static struct platform_driver brcm_ahci_driver = { + .probe = brcm_ahci_probe, + .remove = brcm_ahci_remove, + .driver = { + .name = DRV_NAME, + .of_match_table = ahci_of_match, + .pm = &ahci_brcm_pm_ops, + }, +}; +module_platform_driver(brcm_ahci_driver); + +MODULE_DESCRIPTION("Broadcom SATA3 AHCI Controller Driver"); +MODULE_AUTHOR("Brian Norris"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:sata-brcmstb"); -- 1.9.1 -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/