Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1752207AbbD0FPm (ORCPT ); Mon, 27 Apr 2015 01:15:42 -0400 Received: from mail-ob0-f178.google.com ([209.85.214.178]:35091 "EHLO mail-ob0-f178.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1751182AbbD0FPi (ORCPT ); Mon, 27 Apr 2015 01:15:38 -0400 MIME-Version: 1.0 In-Reply-To: <1429622278-12216-2-git-send-email-b.zolnierkie@samsung.com> References: <1429622278-12216-1-git-send-email-b.zolnierkie@samsung.com> <1429622278-12216-2-git-send-email-b.zolnierkie@samsung.com> Date: Mon, 27 Apr 2015 10:45:37 +0530 Message-ID: Subject: Re: [PATCH 1/8] cpufreq: arm_big_little: add cluster regulator support From: Viresh Kumar To: Bartlomiej Zolnierkiewicz Cc: Thomas Abraham , Sylwester Nawrocki , Mike Turquette , Kukjin Kim , Kukjin Kim , Tomasz Figa , Lukasz Majewski , Heiko Stuebner , Chanwoo Choi , Kevin Hilman , Javier Martinez Canillas , linux-samsung-soc , "linux-pm@vger.kernel.org" , "linux-arm-kernel@lists.infradead.org" , Linux Kernel Mailing List , Doug Anderson , Andreas Faerber , Sachin Kamat Content-Type: text/plain; charset=UTF-8 Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 12550 Lines: 304 On 21 April 2015 at 18:47, Bartlomiej Zolnierkiewicz wrote: > Add cluster regulator support as a preparation to adding > generic arm_big_little_dt cpufreq_dt driver support for > ODROID-XU3 board. This allows arm_big_little[_dt] driver This is irrelevant here, its not about XU3 but any board that wants to use it.. > to set not only the frequency but also the voltage (which > is obtained from operating point's voltage value) for CPU > clusters. > > Cc: Kukjin Kim > Cc: Doug Anderson > Cc: Javier Martinez Canillas > Cc: Andreas Faerber > Cc: Sachin Kamat > Cc: Thomas Abraham > Signed-off-by: Bartlomiej Zolnierkiewicz > --- > .../bindings/cpufreq/arm_big_little_dt.txt | 4 + > drivers/cpufreq/arm_big_little.c | 153 +++++++++++++++++--- > 2 files changed, 139 insertions(+), 18 deletions(-) > > diff --git a/Documentation/devicetree/bindings/cpufreq/arm_big_little_dt.txt b/Documentation/devicetree/bindings/cpufreq/arm_big_little_dt.txt > index 0715695..8ca4a12 100644 > --- a/Documentation/devicetree/bindings/cpufreq/arm_big_little_dt.txt > +++ b/Documentation/devicetree/bindings/cpufreq/arm_big_little_dt.txt > @@ -18,6 +18,10 @@ Required properties: > Optional properties: > - clock-latency: Specify the possible maximum transition latency for clock, > in unit of nanoseconds. > +- cpu-cluster.0-supply: Provides the regulator node supplying voltage to CPU > + cluster 0. > +- cpu-cluster.1-supply: Provides the regulator node supplying voltage to CPU > + cluster 1. I don't think you need these.. http://permalink.gmane.org/gmane.linux.power-management.general/58548 > Examples: > > diff --git a/drivers/cpufreq/arm_big_little.c b/drivers/cpufreq/arm_big_little.c > index e1a6ba6..edb461b 100644 > --- a/drivers/cpufreq/arm_big_little.c > +++ b/drivers/cpufreq/arm_big_little.c > @@ -31,6 +31,7 @@ > #include > #include > #include > +#include > #include > > #include "arm_big_little.h" > @@ -54,6 +55,9 @@ static bool bL_switching_enabled; > > static struct cpufreq_arm_bL_ops *arm_bL_ops; > static struct clk *clk[MAX_CLUSTERS]; > +static struct regulator *reg[MAX_CLUSTERS]; > +static struct device *cpu_devs[MAX_CLUSTERS]; > +static int transition_latencies[MAX_CLUSTERS]; > static struct cpufreq_frequency_table *freq_table[MAX_CLUSTERS + 1]; > static atomic_t cluster_usage[MAX_CLUSTERS + 1]; > > @@ -122,7 +126,76 @@ static unsigned int bL_cpufreq_get_rate(unsigned int cpu) > } > } > > -static unsigned int > +static int > +bL_cpufreq_set_rate_cluster(u32 cpu, u32 cluster, u32 new_rate) > +{ > + unsigned long volt = 0, volt_old = 0; > + long freq_Hz; > + u32 old_rate; > + int ret; > + > + freq_Hz = new_rate * 1000; > + old_rate = clk_get_rate(clk[cluster]) / 1000; > + > + if (!IS_ERR(reg[cluster])) { > + struct dev_pm_opp *opp; > + unsigned long opp_freq; > + > + rcu_read_lock(); > + opp = dev_pm_opp_find_freq_ceil(cpu_devs[cluster], &freq_Hz); > + if (IS_ERR(opp)) { > + rcu_read_unlock(); > + pr_err("%s: cpu %d, cluster: %d, failed to find OPP for %ld\n", > + __func__, cpu, cluster, freq_Hz); > + return PTR_ERR(opp); > + } > + volt = dev_pm_opp_get_voltage(opp); > + opp_freq = dev_pm_opp_get_freq(opp); > + rcu_read_unlock(); > + volt_old = regulator_get_voltage(reg[cluster]); > + pr_debug("%s: cpu %d, cluster: %d, Found OPP: %ld kHz, %ld uV\n", > + __func__, cpu, cluster, opp_freq / 1000, volt); > + } > + > + pr_debug("%s: cpu %d, cluster: %d, %u MHz, %ld mV --> %u MHz, %ld mV\n", > + __func__, cpu, cluster, > + old_rate / 1000, (volt_old > 0) ? volt_old / 1000 : -1, > + new_rate / 1000, volt ? volt / 1000 : -1); > + > + /* scaling up? scale voltage before frequency */ > + if (!IS_ERR(reg[cluster]) && new_rate > old_rate) { > + ret = regulator_set_voltage_tol(reg[cluster], volt, 0); > + if (ret) { > + pr_err("%s: cpu: %d, cluster: %d, failed to scale voltage up: %d\n", > + __func__, cpu, cluster, ret); > + return ret; > + } > + } > + > + ret = clk_set_rate(clk[cluster], new_rate * 1000); > + if (WARN_ON(ret)) { > + pr_err("%s: clk_set_rate failed: %d, cluster: %d\n", > + __func__, cluster, ret); > + if (!IS_ERR(reg[cluster]) && volt_old > 0) > + regulator_set_voltage_tol(reg[cluster], volt_old, 0); > + return ret; > + } > + > + /* scaling down? scale voltage after frequency */ > + if (!IS_ERR(reg[cluster]) && new_rate < old_rate) { > + ret = regulator_set_voltage_tol(reg[cluster], volt, 0); > + if (ret) { > + pr_err("%s: cpu: %d, cluster: %d, failed to scale voltage down: %d\n", > + __func__, cpu, cluster, ret); > + clk_set_rate(clk[cluster], old_rate * 1000); > + return ret; > + } > + } > + > + return 0; > +} > + > +static int If you want to make such fixes, please add them separately. > bL_cpufreq_set_rate(u32 cpu, u32 old_cluster, u32 new_cluster, u32 rate) > { > u32 new_rate, prev_rate; > @@ -145,22 +218,17 @@ bL_cpufreq_set_rate(u32 cpu, u32 old_cluster, u32 new_cluster, u32 rate) > pr_debug("%s: cpu: %d, old cluster: %d, new cluster: %d, freq: %d\n", > __func__, cpu, old_cluster, new_cluster, new_rate); > > - ret = clk_set_rate(clk[new_cluster], new_rate * 1000); > - if (WARN_ON(ret)) { > - pr_err("clk_set_rate failed: %d, new cluster: %d\n", ret, > - new_cluster); > - if (bLs) { > - per_cpu(cpu_last_req_freq, cpu) = prev_rate; > - per_cpu(physical_cluster, cpu) = old_cluster; > - } > - > - mutex_unlock(&cluster_lock[new_cluster]); > - > - return ret; > + ret = bL_cpufreq_set_rate_cluster(cpu, new_cluster, new_rate); > + if (ret && bLs) { > + per_cpu(cpu_last_req_freq, cpu) = prev_rate; > + per_cpu(physical_cluster, cpu) = old_cluster; > } > > mutex_unlock(&cluster_lock[new_cluster]); > > + if (ret) > + return ret; > + > /* Recalc freq for old cluster when switching clusters */ > if (old_cluster != new_cluster) { > pr_debug("%s: cpu: %d, old cluster: %d, new cluster: %d\n", > @@ -174,14 +242,11 @@ bL_cpufreq_set_rate(u32 cpu, u32 old_cluster, u32 new_cluster, u32 rate) > /* Set freq of old cluster if there are cpus left on it */ > new_rate = find_cluster_maxfreq(old_cluster); > new_rate = ACTUAL_FREQ(old_cluster, new_rate); > - ?? > if (new_rate) { > pr_debug("%s: Updating rate of old cluster: %d, to freq: %d\n", > __func__, old_cluster, new_rate); > > - if (clk_set_rate(clk[old_cluster], new_rate * 1000)) > - pr_err("%s: clk_set_rate failed: %d, old cluster: %d\n", > - __func__, ret, old_cluster); > + bL_cpufreq_set_rate_cluster(cpu, old_cluster, new_rate); > } > mutex_unlock(&cluster_lock[old_cluster]); > } > @@ -288,6 +353,8 @@ static void _put_cluster_clk_and_freq_table(struct device *cpu_dev) > return; > > clk_put(clk[cluster]); > + if (!IS_ERR(reg[cluster])) > + regulator_put(reg[cluster]); > dev_pm_opp_free_cpufreq_table(cpu_dev, &freq_table[cluster]); > if (arm_bL_ops->free_opp_table) > arm_bL_ops->free_opp_table(cpu_dev); > @@ -321,6 +388,7 @@ static void put_cluster_clk_and_freq_table(struct device *cpu_dev) > > static int _get_cluster_clk_and_freq_table(struct device *cpu_dev) > { > + unsigned long min_uV = ~0, max_uV = 0; > u32 cluster = raw_cpu_to_cluster(cpu_dev->id); > char name[14] = "cpu-cluster."; > int ret; > @@ -335,6 +403,51 @@ static int _get_cluster_clk_and_freq_table(struct device *cpu_dev) > goto out; > } > > + name[12] = cluster + '0'; > + reg[cluster] = regulator_get_optional(cpu_dev, name); Just pass NULL instead of name. > + if (!IS_ERR(reg[cluster])) { > + unsigned long opp_freq = 0; > + > + dev_dbg(cpu_dev, "%s: reg: %p, cluster: %d\n", > + __func__, reg[cluster], cluster); > + cpu_devs[cluster] = cpu_dev; If you want to save cpu_dev for further use, save it in bL_cpufreq_init() not here. > + /* > + * Disable any OPPs where the connected regulator isn't able to > + * provide the specified voltage and record minimum and maximum > + * voltage levels. > + */ > + while (1) { > + struct dev_pm_opp *opp; > + unsigned long opp_uV; > + > + rcu_read_lock(); > + opp = dev_pm_opp_find_freq_ceil(cpu_dev, &opp_freq); > + if (IS_ERR(opp)) { > + rcu_read_unlock(); > + break; > + } > + opp_uV = dev_pm_opp_get_voltage(opp); > + rcu_read_unlock(); > + > + if (regulator_is_supported_voltage(reg[cluster], opp_uV, > + opp_uV)) { > + if (opp_uV < min_uV) > + min_uV = opp_uV; > + if (opp_uV > max_uV) > + max_uV = opp_uV; > + } else { > + dev_pm_opp_disable(cpu_dev, opp_freq); > + } > + > + opp_freq++; > + } > + > + ret = regulator_set_voltage_time(reg[cluster], min_uV, max_uV); > + if (ret > 0) > + transition_latencies[cluster] = ret * 1000; > + } > + > ret = dev_pm_opp_init_cpufreq_table(cpu_dev, &freq_table[cluster]); > if (ret) { > dev_err(cpu_dev, "%s: failed to init cpufreq table, cpu: %d, err: %d\n", > @@ -342,7 +455,6 @@ static int _get_cluster_clk_and_freq_table(struct device *cpu_dev) > goto free_opp_table; > } > > - name[12] = cluster + '0'; > clk[cluster] = clk_get(cpu_dev, name); > if (!IS_ERR(clk[cluster])) { > dev_dbg(cpu_dev, "%s: clk: %p & freq table: %p, cluster: %d\n", > @@ -469,6 +581,11 @@ static int bL_cpufreq_init(struct cpufreq_policy *policy) > else > policy->cpuinfo.transition_latency = CPUFREQ_ETERNAL; > > + if (cur_cluster < MAX_CLUSTERS && > + policy->cpuinfo.transition_latency != CPUFREQ_ETERNAL) > + policy->cpuinfo.transition_latency > + += transition_latencies[cur_cluster]; Instead of the crap here + a global array for transition latencies, pass 'policy' to _get_cluster_clk_and_freq_table() and add it directly to policy. > + > if (is_bL_switching_enabled()) > per_cpu(cpu_last_req_freq, policy->cpu) = clk_get_cpu_rate(policy->cpu); > > -- > 1.7.9.5 > -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/