MIME-version: 1.0
Content-type: text/plain; charset=utf-8
Content-transfer-encoding: 8BIT
Message-id: <553DD81A.1030504@samsung.com>
Date: Mon, 27 Apr 2015 15:32:58 +0900
From: Ingi Kim <ingi2.kim@samsung.com>
User-Agent: Mozilla/5.0 (X11; Linux x86_64; rv:31.0) Gecko/20100101
 Thunderbird/31.6.0
To: Jacek Anaszewski <j.anaszewski81@gmail.com>
Cc: sakari.ailus@iki.fi, j.anaszewski@samsung.com, varkabhadram@gmail.com,
        joe@perches.com, sw0312.kim@samsung.com, cw00.choi@samsung.com,
        jh80.chung@samsung.com, ideal.song@samsung.com,
        devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
        linux-leds@vger.kernel.org
Subject: Re: [PATCH v7 2/3] leds: ktd2692: add device tree bindings for ktd2692
References: <1429795085-22171-1-git-send-email-ingi2.kim@samsung.com>
 <1429795085-22171-3-git-send-email-ingi2.kim@samsung.com>
 <20150424152936.7e0b101a@ja.home>
In-reply-to: <20150424152936.7e0b101a@ja.home>
DLP-Filter: Pass
Sender: linux-kernel-owner@vger.kernel.org
Content-Length: 3309
Lines: 97

Hi Jacek,

Thanks for the review.


On 2015년 04월 24일 22:29, Jacek Anaszewski wrote:
> On Thu, 23 Apr 2015 22:18:04 +0900
> Hi Ingi,
> 
> Ingi Kim <ingi2.kim@samsung.com> wrote:
> 
>> This patch adds the device tree bindings for ktd2692 flash LEDs.
>> Add Optional properties of child node for Flash LED
>>
>> Signed-off-by: Ingi Kim <ingi2.kim@samsung.com>
>> Acked-by: Seung-Woo Kim <sw0312.kim@samsung.com>
>> ---
>>  .../devicetree/bindings/leds/leds-ktd2692.txt      | 47
>> ++++++++++++++++++++++ 1 file changed, 47 insertions(+)
>>  create mode 100644
>> Documentation/devicetree/bindings/leds/leds-ktd2692.txt
>>
>> diff --git a/Documentation/devicetree/bindings/leds/leds-ktd2692.txt
>> b/Documentation/devicetree/bindings/leds/leds-ktd2692.txt new file
>> mode 100644 index 0000000..708f2d4
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/leds/leds-ktd2692.txt
>> @@ -0,0 +1,47 @@
>> +* Kinetic Technologies - KTD2692 Flash LED Driver
>> +
>> +KTD2692 is the ideal power solution for high-power flash LEDs.
>> +It uses ExpressWire single-wire programming for maximum flexibility.
>> +
>> +The ExpressWire interface through CTRL pin can control LED on/off and
>> +enable/disable the IC, Movie(max 1/3 of Flash current) / Flash mode
>> current, +Flash timeout, LVP(low voltage protection).
>> +
>> +Also, When the AUX pin is pulled high while CTRL pin is high,
>> +LED current will be ramped up to the flash-mode current level.
>> +
>> +Required properties:
>> +- compatible: "kinetic,ktd2692"
>> +- ctrl-gpio : gpio pin in order control CTRL pin
>> +- aux-gpio : gpio pin in order control AUX pin
>> +
>> +Optional properties:
>> +- vin-supply : "vin" LED supply (2.7V to 5.5V)
>> +  See Documentation/devicetree/bindings/regulator/regulator.txt
>> +
>> +A discrete LED element connected to the device must be represented
>> by a child +node - see
>> Documentation/devicetree/bindings/leds/common.txt. +
>> +Required properties for flash LED child nodes:
>> +  See Documentation/devicetree/bindings/leds/common.txt
>> +- flash-max-microamp : Flash LED maximum current
>> +  Formula : I(mA) = 15000 / Rset
>> +- flash-max-timeout-us : Flash LED maximum timeout
> 
> Patch [1] makes the led-max-microamp property mandatory for
> the LEDs with configurable current for non-flash modes.
> 
> It hasn't been merged yet as we are waiting for ack from DT maintainer.
> 
> 

Ok, I'll add it.

I saw discussion about introduction of new properties for Flash LED,
I also hope that patch[1] would be merged as soon as possible :)

>> +
>> +Optional properties for flash LED child nodes:
>> +- label : see Documentation/devicetree/bindings/leds/common.txt
>> +
>> +Example:
>> +
>> +ktd2692 {
>> +	compatible = "kinetic,ktd2692";
>> +	ctrl-gpio = <&gpc0 1 0>;
>> +	aux-gpio = <&gpc0 2 0>;
>> +	vin-supply = <&vbat>;
>> +
>> +	flash-led {
>> +		label = "ktd2692-flash";
>> +		flash-max-microamp = <1500000>;
>> +		flash-max-timeout-us = <1835000>;
>> +	};
>> +};
> 
> [1] [PATCH v6] DT: leds: Improve description of flash LEDs related
> properties
> 
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/