Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S965813AbbD0Woh (ORCPT ); Mon, 27 Apr 2015 18:44:37 -0400 Received: from mail-qg0-f73.google.com ([209.85.192.73]:33274 "EHLO mail-qg0-f73.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S965158AbbD0Wod (ORCPT ); Mon, 27 Apr 2015 18:44:33 -0400 From: Andrew Bresticker To: Stephen Warren , Thierry Reding , Alexandre Courbot Cc: linux-tegra@vger.kernel.org, linux-usb@vger.kernel.org, devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org, Andrew Bresticker , Rob Herring , Pawel Moll , Mark Rutland , Ian Campbell , Kumar Gala , Mathias Nyman , Greg Kroah-Hartman Subject: [PATCH V7 8/9] usb: Add NVIDIA Tegra xHCI controller binding Date: Mon, 27 Apr 2015 15:37:21 -0700 Message-Id: <1430174242-29465-9-git-send-email-abrestic@chromium.org> X-Mailer: git-send-email 2.2.0.rc0.207.ga3a616c In-Reply-To: <1430174242-29465-1-git-send-email-abrestic@chromium.org> References: <1430174242-29465-1-git-send-email-abrestic@chromium.org> Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 5463 Lines: 135 Add device-tree binding documentation for the xHCI controller present on Tegra124 and later SoCs. Signed-off-by: Andrew Bresticker Cc: Rob Herring Cc: Pawel Moll Cc: Mark Rutland Cc: Ian Campbell Cc: Kumar Gala Cc: Mathias Nyman Cc: Greg Kroah-Hartman --- Changes from v6: - Removed XUSB_DEV related clocks/resets. They will be consumed by a separate driver and binding. - Removed reg/interrupts properties. No changes from v5. Changes from v4: - Updated regulator names, as suggested by Thierry. No changes from v3. Changes from v2: - Added mbox-names property. Changes from v1: - Updated to use common mailbox bindings. - Added remaining XUSB-related clocks and resets. - Updated list of power supplies to be more accurate wrt to the hardware. --- .../bindings/usb/nvidia,tegra124-xhci.txt | 90 ++++++++++++++++++++++ 1 file changed, 90 insertions(+) create mode 100644 Documentation/devicetree/bindings/usb/nvidia,tegra124-xhci.txt diff --git a/Documentation/devicetree/bindings/usb/nvidia,tegra124-xhci.txt b/Documentation/devicetree/bindings/usb/nvidia,tegra124-xhci.txt new file mode 100644 index 0000000..5c980b0 --- /dev/null +++ b/Documentation/devicetree/bindings/usb/nvidia,tegra124-xhci.txt @@ -0,0 +1,90 @@ +NVIDIA Tegra xHCI controller +============================ + +The Tegra xHCI controller supports both USB2 and USB3 interfaces exposed +by the Tegra XUSB pad controller. + +Required properties: +-------------------- + - compatible: For Tegra124, must contain "nvidia,tegra124-xhci". + Otherwise, must contain '"nvidia,-xhci", "nvidia,tegra124-xhci"' + where is tegra132. + - clocks: Must contain an entry for each entry in clock-names. + See ../clock/clock-bindings.txt for details. + - clock-names: Must include the following entries: + - xusb_host + - xusb_host_src + - xusb_falcon_src + - xusb_ss + - xusb_ss_src + - xusb_ss_div2 + - xusb_hs_src + - xusb_fs_src + - pll_u_480m + - clk_m + - pll_e + - resets: Must contain an entry for each entry in reset-names. + See ../reset/reset.txt for details. + - reset-names: Must include the following entries: + - xusb_host + - xusb_ss + - xusb_src + Note that xusb_src is the shared reset for xusb_{ss,hs,fs,falcon,host}_src. + - mboxes: Must contain an entry for the XUSB mailbox channel. + See ../mailbox/mailbox.txt for details. + - mbox-names: Must include the following entries: + - xusb + - avddio-pex-supply: PCIe/USB3 analog logic power supply. Must supply 1.05V. + - dvddio-pex-supply: PCIe/USB3 digital logic power supply. Must supply 1.05V. + - avdd-usb-supply: USB controller power supply. Must supply 3.3V. + - avdd-pll-utmip-supply: UTMI PLL power supply. Must supply 1.8V. + - avdd-pll-erefe-supply: PLLE reference PLL power supply. Must supply 1.05V. + - avdd-usb-ss-pll-supply: PCIe/USB3 PLL power supply. Must supply 1.05V. + - hvdd-usb-ss-supply: High-voltage PCIe/USB3 power supply. Must supply 3.3V. + - hvdd-usb-ss-pll-e-supply: High-voltage PLLE power supply. Must supply 3.3V. + +Optional properties: +-------------------- + - phys: Must contain an entry for each entry in phy-names. + See ../phy/phy-bindings.txt for details. + - phy-names: Should include an entry for each PHY used by the controller. + Names must be of the form "-" where is one of "utmi", + "hsic", or "usb3" and is a 0-based index. On Tegra124, there may + be up to 3 UTMI, 2 HSIC, and 2 USB3 PHYs. + +Example: +-------- + usb-host { + compatible = "nvidia,tegra124-xhci"; + clocks = <&tegra_car TEGRA124_CLK_XUSB_HOST>, + <&tegra_car TEGRA124_CLK_XUSB_HOST_SRC>, + <&tegra_car TEGRA124_CLK_XUSB_FALCON_SRC>, + <&tegra_car TEGRA124_CLK_XUSB_SS>, + <&tegra_car TEGRA124_CLK_XUSB_SS_DIV2>, + <&tegra_car TEGRA124_CLK_XUSB_SS_SRC>, + <&tegra_car TEGRA124_CLK_XUSB_HS_SRC>, + <&tegra_car TEGRA124_CLK_XUSB_FS_SRC>, + <&tegra_car TEGRA124_CLK_PLL_U_480M>, + <&tegra_car TEGRA124_CLK_CLK_M>, + <&tegra_car TEGRA124_CLK_PLL_E>; + clock-names = "xusb_host", "xusb_host_src", "xusb_falcon_src", + "xusb_ss", "xusb_ss_div2", "xusb_ss_src", + "xusb_hs_src", "xusb_fs_src", "pll_u_480m", + "clk_m", "pll_e"; + resets = <&tegra_car 89>, <&tegra_car 156>, <&tegra_car 143>; + reset-names = "xusb_host", "xusb_ss", "xusb_src"; + mboxes = <&xusb_mbox>; + mbox-names = "xusb"; + phys = <&padctl TEGRA_XUSB_PADCTL_UTMI_P1>, /* mini-PCIe USB */ + <&padctl TEGRA_XUSB_PADCTL_UTMI_P2>, /* USB A */ + <&padctl TEGRA_XUSB_PADCTL_USB3_P0>; /* USB A */ + phy-names = "utmi-1", "utmi-2", "usb3-0"; + avddio-pex-supply = <&vdd_1v05_run>; + dvddio-pex-supply = <&vdd_1v05_run>; + avdd-usb-supply = <&vdd_3v3_lp0>; + avdd-pll-utmip-supply = <&vddio_1v8>; + avdd-pll-erefe-supply = <&avdd_1v05_run>; + avdd-usb-ss-pll-supply = <&vdd_1v05_run>; + hvdd-usb-ss-supply = <&vdd_3v3_lp0>; + hvdd-usb-ss-pll-e-supply = <&vdd_3v3_lp0>; + }; -- 2.2.0.rc0.207.ga3a616c -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/