Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1753727AbbEBTMe (ORCPT ); Sat, 2 May 2015 15:12:34 -0400 Received: from mail.linuxfoundation.org ([140.211.169.12]:44535 "EHLO mail.linuxfoundation.org" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1753705AbbEBTMa (ORCPT ); Sat, 2 May 2015 15:12:30 -0400 From: Greg Kroah-Hartman To: linux-kernel@vger.kernel.org Cc: Greg Kroah-Hartman , stable@vger.kernel.org, Felipe Balbi Subject: [PATCH 4.0 072/220] usb: musb: core: fix TX/RX endpoint order Date: Sat, 2 May 2015 20:59:47 +0200 Message-Id: <20150502185857.465417533@linuxfoundation.org> X-Mailer: git-send-email 2.3.7 In-Reply-To: <20150502185854.333748961@linuxfoundation.org> References: <20150502185854.333748961@linuxfoundation.org> User-Agent: quilt/0.64 MIME-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-15 Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 3159 Lines: 116 4.0-stable review patch. If anyone has any objections, please let me know. ------------------ From: Felipe Balbi commit e3c93e1a3f35be4cf1493d3ccfb0c6d9209e4922 upstream. As per Mentor Graphics' documentation, we should always handle TX endpoints before RX endpoints. This patch fixes that error while also updating some hard-to-read comments which were scattered around musb_interrupt(). This patch should be backported as far back as possible since this error has been in the driver since it's conception. Signed-off-by: Felipe Balbi Signed-off-by: Greg Kroah-Hartman --- drivers/usb/musb/musb_core.c | 44 +++++++++++++++++++++++++------------------ 1 file changed, 26 insertions(+), 18 deletions(-) --- a/drivers/usb/musb/musb_core.c +++ b/drivers/usb/musb/musb_core.c @@ -1597,16 +1597,30 @@ irqreturn_t musb_interrupt(struct musb * is_host_active(musb) ? "host" : "peripheral", musb->int_usb, musb->int_tx, musb->int_rx); - /* the core can interrupt us for multiple reasons; docs have - * a generic interrupt flowchart to follow + /** + * According to Mentor Graphics' documentation, flowchart on page 98, + * IRQ should be handled as follows: + * + * . Resume IRQ + * . Session Request IRQ + * . VBUS Error IRQ + * . Suspend IRQ + * . Connect IRQ + * . Disconnect IRQ + * . Reset/Babble IRQ + * . SOF IRQ (we're not using this one) + * . Endpoint 0 IRQ + * . TX Endpoints + * . RX Endpoints + * + * We will be following that flowchart in order to avoid any problems + * that might arise with internal Finite State Machine. */ + if (musb->int_usb) retval |= musb_stage0_irq(musb, musb->int_usb, devctl); - /* "stage 1" is handling endpoint irqs */ - - /* handle endpoint 0 first */ if (musb->int_tx & 1) { if (is_host_active(musb)) retval |= musb_h_ep0_irq(musb); @@ -1614,37 +1628,31 @@ irqreturn_t musb_interrupt(struct musb * retval |= musb_g_ep0_irq(musb); } - /* RX on endpoints 1-15 */ - reg = musb->int_rx >> 1; + reg = musb->int_tx >> 1; ep_num = 1; while (reg) { if (reg & 1) { - /* musb_ep_select(musb->mregs, ep_num); */ - /* REVISIT just retval = ep->rx_irq(...) */ retval = IRQ_HANDLED; if (is_host_active(musb)) - musb_host_rx(musb, ep_num); + musb_host_tx(musb, ep_num); else - musb_g_rx(musb, ep_num); + musb_g_tx(musb, ep_num); } - reg >>= 1; ep_num++; } - /* TX on endpoints 1-15 */ - reg = musb->int_tx >> 1; + reg = musb->int_rx >> 1; ep_num = 1; while (reg) { if (reg & 1) { - /* musb_ep_select(musb->mregs, ep_num); */ - /* REVISIT just retval |= ep->tx_irq(...) */ retval = IRQ_HANDLED; if (is_host_active(musb)) - musb_host_tx(musb, ep_num); + musb_host_rx(musb, ep_num); else - musb_g_tx(musb, ep_num); + musb_g_rx(musb, ep_num); } + reg >>= 1; ep_num++; } -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/