Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1946814AbbEBTcp (ORCPT ); Sat, 2 May 2015 15:32:45 -0400 Received: from mail.linuxfoundation.org ([140.211.169.12]:45713 "EHLO mail.linuxfoundation.org" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1946768AbbEBTcm (ORCPT ); Sat, 2 May 2015 15:32:42 -0400 From: Greg Kroah-Hartman To: linux-kernel@vger.kernel.org Cc: Greg Kroah-Hartman , stable@vger.kernel.org, Ulrik De Bie , Dmitry Torokhov Subject: [PATCH 3.19 085/177] Input: elantech - fix absolute mode setting on some ASUS laptops Date: Sat, 2 May 2015 21:01:47 +0200 Message-Id: <20150502190123.317075232@linuxfoundation.org> X-Mailer: git-send-email 2.3.7 In-Reply-To: <20150502190119.666291882@linuxfoundation.org> References: <20150502190119.666291882@linuxfoundation.org> User-Agent: quilt/0.64 MIME-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-15 Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 3509 Lines: 92 3.19-stable review patch. If anyone has any objections, please let me know. ------------------ From: Ulrik De Bie commit bd884149aca61de269fd9bad83fe2a4232ffab21 upstream. On ASUS TP500LN and X750JN, the touchpad absolute mode is reset each time set_rate is done. In order to fix this, we will verify the firmware version, and if it matches the one in those laptops, the set_rate function is overloaded with a function elantech_set_rate_restore_reg_07 that performs the set_rate with the original function, followed by a restore of reg_07 (the register that sets the absolute mode on elantech v4 hardware). Also the ASUS TP500LN and X750JN firmware version, capabilities, and button constellation is added to elantech.c Reported-and-tested-by: George Moutsopoulos Signed-off-by: Ulrik De Bie Signed-off-by: Dmitry Torokhov Signed-off-by: Greg Kroah-Hartman --- drivers/input/mouse/elantech.c | 22 ++++++++++++++++++++++ drivers/input/mouse/elantech.h | 1 + 2 files changed, 23 insertions(+) --- a/drivers/input/mouse/elantech.c +++ b/drivers/input/mouse/elantech.c @@ -893,6 +893,21 @@ static psmouse_ret_t elantech_process_by } /* + * This writes the reg_07 value again to the hardware at the end of every + * set_rate call because the register loses its value. reg_07 allows setting + * absolute mode on v4 hardware + */ +static void elantech_set_rate_restore_reg_07(struct psmouse *psmouse, + unsigned int rate) +{ + struct elantech_data *etd = psmouse->private; + + etd->original_set_rate(psmouse, rate); + if (elantech_write_reg(psmouse, 0x07, etd->reg_07)) + psmouse_err(psmouse, "restoring reg_07 failed\n"); +} + +/* * Put the touchpad into absolute mode */ static int elantech_set_absolute_mode(struct psmouse *psmouse) @@ -1094,6 +1109,8 @@ static int elantech_get_resolution_v4(st * Asus K53SV 0x450f01 78, 15, 0c 2 hw buttons * Asus G46VW 0x460f02 00, 18, 0c 2 hw buttons * Asus G750JX 0x360f00 00, 16, 0c 2 hw buttons + * Asus TP500LN 0x381f17 10, 14, 0e clickpad + * Asus X750JN 0x381f17 10, 14, 0e clickpad * Asus UX31 0x361f00 20, 15, 0e clickpad * Asus UX32VD 0x361f02 00, 15, 0e clickpad * Avatar AVIU-145A2 0x361f00 ? clickpad @@ -1635,6 +1652,11 @@ int elantech_init(struct psmouse *psmous goto init_fail; } + if (etd->fw_version == 0x381f17) { + etd->original_set_rate = psmouse->set_rate; + psmouse->set_rate = elantech_set_rate_restore_reg_07; + } + if (elantech_set_input_params(psmouse)) { psmouse_err(psmouse, "failed to query touchpad range.\n"); goto init_fail; --- a/drivers/input/mouse/elantech.h +++ b/drivers/input/mouse/elantech.h @@ -142,6 +142,7 @@ struct elantech_data { struct finger_pos mt[ETP_MAX_FINGERS]; unsigned char parity[256]; int (*send_cmd)(struct psmouse *psmouse, unsigned char c, unsigned char *param); + void (*original_set_rate)(struct psmouse *psmouse, unsigned int rate); }; #ifdef CONFIG_MOUSE_PS2_ELANTECH -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/