Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1161038AbbEEJ3K (ORCPT ); Tue, 5 May 2015 05:29:10 -0400 Received: from mail-wi0-f172.google.com ([209.85.212.172]:37010 "EHLO mail-wi0-f172.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1031438AbbEEJ03 (ORCPT ); Tue, 5 May 2015 05:26:29 -0400 From: Michal Simek To: netdev@vger.kernel.org Cc: =?UTF-8?q?S=C3=B6ren=20Brinkmann?= , monstr@monstr.eu, John Linn , Anirudha Sarangi , linux-kernel@vger.kernel.org, linux-arm-kernel@lists.infradead.org Subject: [PATCH 07/12] net: axienet: Fix comments blocks Date: Tue, 5 May 2015 11:26:00 +0200 Message-Id: X-Mailer: git-send-email 2.3.5 In-Reply-To: <7fb84f65a61bbe0fdb4b61a871cf4d4f7910955d.1430817941.git.michal.simek@xilinx.com> References: <7fb84f65a61bbe0fdb4b61a871cf4d4f7910955d.1430817941.git.michal.simek@xilinx.com> In-Reply-To: <7fb84f65a61bbe0fdb4b61a871cf4d4f7910955d.1430817941.git.michal.simek@xilinx.com> References: <7fb84f65a61bbe0fdb4b61a871cf4d4f7910955d.1430817941.git.michal.simek@xilinx.com> Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 14759 Lines: 327 There is rule for network drivers with comments blocks which is newly checked by checkpatch.pl script. Let's fix it. Signed-off-by: Michal Simek --- drivers/net/ethernet/xilinx/xilinx_axienet.h | 93 ++++++++++++----------- drivers/net/ethernet/xilinx/xilinx_axienet_main.c | 34 +++++---- drivers/net/ethernet/xilinx/xilinx_axienet_mdio.c | 3 +- 3 files changed, 71 insertions(+), 59 deletions(-) diff --git a/drivers/net/ethernet/xilinx/xilinx_axienet.h b/drivers/net/ethernet/xilinx/xilinx_axienet.h index 4e309440964a..2aa6857f930e 100644 --- a/drivers/net/ethernet/xilinx/xilinx_axienet.h +++ b/drivers/net/ethernet/xilinx/xilinx_axienet.h @@ -38,18 +38,21 @@ #define XAE_OPTION_FLOW_CONTROL (1 << 4) /* Strip FCS and PAD from incoming frames. Note: PAD from VLAN frames is not - * stripped. Default: disabled (set) */ + * stripped. Default: disabled (set) + */ #define XAE_OPTION_FCS_STRIP (1 << 5) /* Generate FCS field and add PAD automatically for outgoing frames. - * Default: enabled (set) */ + * Default: enabled (set) + */ #define XAE_OPTION_FCS_INSERT (1 << 6) /* Enable Length/Type error checking for incoming frames. When this option is * set, the MAC will filter frames that have a mismatched type/length field * and if XAE_OPTION_REPORT_RXERR is set, the user is notified when these * types of frames are encountered. When this option is cleared, the MAC will - * allow these types of frames to be received. Default: enabled (set) */ + * allow these types of frames to be received. Default: enabled (set) + */ #define XAE_OPTION_LENTYPE_ERR (1 << 7) /* Enable the transmitter. Default: enabled (set) */ @@ -159,12 +162,12 @@ #define XAE_MDIO_MWD_OFFSET 0x00000508 /* MII Management Write Data */ #define XAE_MDIO_MRD_OFFSET 0x0000050C /* MII Management Read Data */ #define XAE_MDIO_MIS_OFFSET 0x00000600 /* MII Management Interrupt Status */ -#define XAE_MDIO_MIP_OFFSET 0x00000620 /* MII Mgmt Interrupt Pending - * register offset */ -#define XAE_MDIO_MIE_OFFSET 0x00000640 /* MII Management Interrupt Enable - * register offset */ -#define XAE_MDIO_MIC_OFFSET 0x00000660 /* MII Management Interrupt Clear - * register offset. */ +/* MII Mgmt Interrupt Pending register offset */ +#define XAE_MDIO_MIP_OFFSET 0x00000620 +/* MII Management Interrupt Enable register offset */ +#define XAE_MDIO_MIE_OFFSET 0x00000640 +/* MII Management Interrupt Clear register offset. */ +#define XAE_MDIO_MIC_OFFSET 0x00000660 #define XAE_UAW0_OFFSET 0x00000700 /* Unicast address word 0 */ #define XAE_UAW1_OFFSET 0x00000704 /* Unicast address word 1 */ #define XAE_FMI_OFFSET 0x00000708 /* Filter Mask Index */ @@ -176,18 +179,17 @@ #define XAE_MCAST_TABLE_OFFSET 0x00020000 /* Multicast table address */ /* Bit Masks for Axi Ethernet RAF register */ -#define XAE_RAF_MCSTREJ_MASK 0x00000002 /* Reject receive multicast - * destination address */ -#define XAE_RAF_BCSTREJ_MASK 0x00000004 /* Reject receive broadcast - * destination address */ +/* Reject receive multicast destination address */ +#define XAE_RAF_MCSTREJ_MASK 0x00000002 +/* Reject receive broadcast destination address */ +#define XAE_RAF_BCSTREJ_MASK 0x00000004 #define XAE_RAF_TXVTAGMODE_MASK 0x00000018 /* Tx VLAN TAG mode */ #define XAE_RAF_RXVTAGMODE_MASK 0x00000060 /* Rx VLAN TAG mode */ #define XAE_RAF_TXVSTRPMODE_MASK 0x00000180 /* Tx VLAN STRIP mode */ #define XAE_RAF_RXVSTRPMODE_MASK 0x00000600 /* Rx VLAN STRIP mode */ #define XAE_RAF_NEWFNCENBL_MASK 0x00000800 /* New function mode */ -#define XAE_RAF_EMULTIFLTRENBL_MASK 0x00001000 /* Exteneded Multicast - * Filtering mode - */ +/* Exteneded Multicast Filtering mode */ +#define XAE_RAF_EMULTIFLTRENBL_MASK 0x00001000 #define XAE_RAF_STATSRST_MASK 0x00002000 /* Stats. Counter Reset */ #define XAE_RAF_RXBADFRMEN_MASK 0x00004000 /* Recv Bad Frame Enable */ #define XAE_RAF_TXVTAGMODE_SHIFT 3 /* Tx Tag mode shift bits */ @@ -197,15 +199,16 @@ /* Bit Masks for Axi Ethernet TPF and IFGP registers */ #define XAE_TPF_TPFV_MASK 0x0000FFFF /* Tx pause frame value */ -#define XAE_IFGP0_IFGP_MASK 0x0000007F /* Transmit inter-frame - * gap adjustment value */ +/* Transmit inter-frame gap adjustment value */ +#define XAE_IFGP0_IFGP_MASK 0x0000007F /* Bit Masks for Axi Ethernet IS, IE and IP registers, Same masks apply - * for all 3 registers. */ -#define XAE_INT_HARDACSCMPLT_MASK 0x00000001 /* Hard register access - * complete */ -#define XAE_INT_AUTONEG_MASK 0x00000002 /* Auto negotiation - * complete */ + * for all 3 registers. + */ +/* Hard register access complete */ +#define XAE_INT_HARDACSCMPLT_MASK 0x00000001 +/* Auto negotiation complete */ +#define XAE_INT_AUTONEG_MASK 0x00000002 #define XAE_INT_RXCMPIT_MASK 0x00000004 /* Rx complete */ #define XAE_INT_RXRJECT_MASK 0x00000008 /* Rx frame rejected */ #define XAE_INT_RXFIFOOVR_MASK 0x00000010 /* Rx fifo overrun */ @@ -215,10 +218,9 @@ #define XAE_INT_PHYRSTCMPLT_MASK 0x00000100 /* Phy Reset complete */ #define XAE_INT_ALL_MASK 0x0000003F /* All the ints */ +/* INT bits that indicate receive errors */ #define XAE_INT_RECV_ERROR_MASK \ - (XAE_INT_RXRJECT_MASK | XAE_INT_RXFIFOOVR_MASK) /* INT bits that - * indicate receive - * errors */ + (XAE_INT_RXRJECT_MASK | XAE_INT_RXFIFOOVR_MASK) /* Bit masks for Axi Ethernet VLAN TPID Word 0 register */ #define XAE_TPID_0_MASK 0x0000FFFF /* TPID 0 */ @@ -231,27 +233,28 @@ /* Bit masks for Axi Ethernet RCW1 register */ #define XAE_RCW1_RST_MASK 0x80000000 /* Reset */ #define XAE_RCW1_JUM_MASK 0x40000000 /* Jumbo frame enable */ -#define XAE_RCW1_FCS_MASK 0x20000000 /* In-Band FCS enable - * (FCS not stripped) */ +/* In-Band FCS enable (FCS not stripped) */ +#define XAE_RCW1_FCS_MASK 0x20000000 #define XAE_RCW1_RX_MASK 0x10000000 /* Receiver enable */ #define XAE_RCW1_VLAN_MASK 0x08000000 /* VLAN frame enable */ -#define XAE_RCW1_LT_DIS_MASK 0x02000000 /* Length/type field valid check - * disable */ -#define XAE_RCW1_CL_DIS_MASK 0x01000000 /* Control frame Length check - * disable */ -#define XAE_RCW1_PAUSEADDR_MASK 0x0000FFFF /* Pause frame source address - * bits [47:32]. Bits [31:0] are - * stored in register RCW0 */ +/* Length/type field valid check disable */ +#define XAE_RCW1_LT_DIS_MASK 0x02000000 +/* Control frame Length check disable */ +#define XAE_RCW1_CL_DIS_MASK 0x01000000 +/* Pause frame source address bits [47:32]. Bits [31:0] are + * stored in register RCW0 + */ +#define XAE_RCW1_PAUSEADDR_MASK 0x0000FFFF /* Bit masks for Axi Ethernet TC register */ #define XAE_TC_RST_MASK 0x80000000 /* Reset */ #define XAE_TC_JUM_MASK 0x40000000 /* Jumbo frame enable */ -#define XAE_TC_FCS_MASK 0x20000000 /* In-Band FCS enable - * (FCS not generated) */ +/* In-Band FCS enable (FCS not generated) */ +#define XAE_TC_FCS_MASK 0x20000000 #define XAE_TC_TX_MASK 0x10000000 /* Transmitter enable */ #define XAE_TC_VLAN_MASK 0x08000000 /* VLAN frame enable */ -#define XAE_TC_IFG_MASK 0x02000000 /* Inter-frame gap adjustment - * enable */ +/* Inter-frame gap adjustment enable */ +#define XAE_TC_IFG_MASK 0x02000000 /* Bit masks for Axi Ethernet FCC register */ #define XAE_FCC_FCRX_MASK 0x20000000 /* Rx flow control enable */ @@ -301,10 +304,10 @@ #define XAE_MDIO_INT_MIIM_RDY_MASK 0x00000001 /* MIIM Interrupt */ /* Bit masks for Axi Ethernet UAW1 register */ -#define XAE_UAW1_UNICASTADDR_MASK 0x0000FFFF /* Station address bits - * [47:32]; Station address - * bits [31:0] are stored in - * register UAW0 */ +/* Station address bits [47:32]; Station address + * bits [31:0] are stored in register UAW0 + */ +#define XAE_UAW1_UNICASTADDR_MASK 0x0000FFFF /* Bit masks for Axi Ethernet FMI register */ #define XAE_FMI_PM_MASK 0x80000000 /* Promis. mode enable */ @@ -320,8 +323,8 @@ #define XAE_PHY_TYPE_SGMII 4 #define XAE_PHY_TYPE_1000BASE_X 5 -#define XAE_MULTICAST_CAM_TABLE_NUM 4 /* Total number of entries in the - * hardware multicast table. */ + /* Total number of entries in the hardware multicast table. */ +#define XAE_MULTICAST_CAM_TABLE_NUM 4 /* Axi Ethernet Synthesis features */ #define XAE_FEATURE_PARTIAL_RX_CSUM (1 << 0) diff --git a/drivers/net/ethernet/xilinx/xilinx_axienet_main.c b/drivers/net/ethernet/xilinx/xilinx_axienet_main.c index 39bb2e93cc65..ddaa07a0bf51 100644 --- a/drivers/net/ethernet/xilinx/xilinx_axienet_main.c +++ b/drivers/net/ethernet/xilinx/xilinx_axienet_main.c @@ -198,9 +198,7 @@ static int axienet_dma_bd_init(struct net_device *ndev) lp->tx_bd_tail = 0; lp->rx_bd_ci = 0; - /* - * Allocate the Tx and Rx buffer descriptors. - */ + /* Allocate the Tx and Rx buffer descriptors. */ lp->tx_bd_v = dma_zalloc_coherent(ndev->dev.parent, sizeof(*lp->tx_bd_v) * TX_BD_NUM, &lp->tx_bd_p, GFP_KERNEL); @@ -263,7 +261,8 @@ static int axienet_dma_bd_init(struct net_device *ndev) axienet_dma_out32(lp, XAXIDMA_TX_CR_OFFSET, cr); /* Populate the tail pointer and bring the Rx Axi DMA engine out of - * halted state. This will make the Rx side ready for reception.*/ + * halted state. This will make the Rx side ready for reception. + */ axienet_dma_out32(lp, XAXIDMA_RX_CDESC_OFFSET, lp->rx_bd_p); cr = axienet_dma_in32(lp, XAXIDMA_RX_CR_OFFSET); axienet_dma_out32(lp, XAXIDMA_RX_CR_OFFSET, @@ -273,7 +272,8 @@ static int axienet_dma_bd_init(struct net_device *ndev) /* Write to the RS (Run-stop) bit in the Tx channel control register. * Tx channel is now ready to run. But only after we write to the - * tail pointer register that the Tx channel will start transmitting */ + * tail pointer register that the Tx channel will start transmitting. + */ axienet_dma_out32(lp, XAXIDMA_TX_CDESC_OFFSET, lp->tx_bd_p); cr = axienet_dma_in32(lp, XAXIDMA_TX_CR_OFFSET); axienet_dma_out32(lp, XAXIDMA_TX_CR_OFFSET, @@ -354,7 +354,8 @@ static void axienet_set_multicast_list(struct net_device *ndev) netdev_mc_count(ndev) > XAE_MULTICAST_CAM_TABLE_NUM) { /* We must make the kernel realize we had to move into * promiscuous mode. If it was a promiscuous mode request - * the flag is already set. If not we set it. */ + * the flag is already set. If not we set it. + */ ndev->flags |= IFF_PROMISC; reg = axienet_ior(lp, XAE_FMI_OFFSET); reg |= XAE_FMI_PM_MASK; @@ -438,7 +439,8 @@ static void __axienet_device_reset(struct axienet_local *lp, /* Reset Axi DMA. This would reset Axi Ethernet core as well. The reset * process of Axi DMA takes a while to complete as all pending * commands/transfers will be flushed or completed during this - * reset process. */ + * reset process. + */ axienet_dma_out32(lp, offset, XAXIDMA_CR_RESET_MASK); timeout = DELAY_OF_ONE_MILLISEC; while (axienet_dma_in32(lp, offset) & XAXIDMA_CR_RESET_MASK) { @@ -499,7 +501,8 @@ static void axienet_device_reset(struct net_device *ndev) axienet_iow(lp, XAE_FCC_OFFSET, XAE_FCC_FCRX_MASK); /* Sync default options with HW but leave receiver and - * transmitter disabled.*/ + * transmitter disabled. + */ axienet_setoptions(ndev, lp->options & ~(XAE_OPTION_TXEN | XAE_OPTION_RXEN)); axienet_set_mac_address(ndev, NULL); @@ -919,7 +922,8 @@ static int axienet_open(struct net_device *ndev) /* Disable the MDIO interface till Axi Ethernet Reset is completed. * When we do an Axi Ethernet reset, it resets the complete core * including the MDIO. If MDIO is not disabled when the reset - * process is started, MDIO will be broken afterwards. */ + * process is started, MDIO will be broken afterwards. + */ axienet_iow(lp, XAE_MDIO_MC_OFFSET, (mdio_mcreg & (~XAE_MDIO_MC_MDIOEN_MASK))); axienet_device_reset(ndev); @@ -1365,7 +1369,8 @@ static void axienet_dma_err_handler(unsigned long data) /* Disable the MDIO interface till Axi Ethernet Reset is completed. * When we do an Axi Ethernet reset, it resets the complete core * including the MDIO. So if MDIO is not disabled when the reset - * process is started, MDIO will be broken afterwards. */ + * process is started, MDIO will be broken afterwards. + */ axienet_iow(lp, XAE_MDIO_MC_OFFSET, (mdio_mcreg & ~XAE_MDIO_MC_MDIOEN_MASK)); @@ -1436,7 +1441,8 @@ static void axienet_dma_err_handler(unsigned long data) axienet_dma_out32(lp, XAXIDMA_TX_CR_OFFSET, cr); /* Populate the tail pointer and bring the Rx Axi DMA engine out of - * halted state. This will make the Rx side ready for reception.*/ + * halted state. This will make the Rx side ready for reception. + */ axienet_dma_out32(lp, XAXIDMA_RX_CDESC_OFFSET, lp->rx_bd_p); cr = axienet_dma_in32(lp, XAXIDMA_RX_CR_OFFSET); axienet_dma_out32(lp, XAXIDMA_RX_CR_OFFSET, @@ -1446,7 +1452,8 @@ static void axienet_dma_err_handler(unsigned long data) /* Write to the RS (Run-stop) bit in the Tx channel control register. * Tx channel is now ready to run. But only after we write to the - * tail pointer register that the Tx channel will start transmitting */ + * tail pointer register that the Tx channel will start transmitting + */ axienet_dma_out32(lp, XAXIDMA_TX_CDESC_OFFSET, lp->tx_bd_p); cr = axienet_dma_in32(lp, XAXIDMA_TX_CR_OFFSET); axienet_dma_out32(lp, XAXIDMA_TX_CR_OFFSET, @@ -1462,7 +1469,8 @@ static void axienet_dma_err_handler(unsigned long data) axienet_iow(lp, XAE_FCC_OFFSET, XAE_FCC_FCRX_MASK); /* Sync default options with HW but leave receiver and - * transmitter disabled.*/ + * transmitter disabled. + */ axienet_setoptions(ndev, lp->options & ~(XAE_OPTION_TXEN | XAE_OPTION_RXEN)); axienet_set_mac_address(ndev, NULL); diff --git a/drivers/net/ethernet/xilinx/xilinx_axienet_mdio.c b/drivers/net/ethernet/xilinx/xilinx_axienet_mdio.c index fce557518b7d..315136db37c9 100644 --- a/drivers/net/ethernet/xilinx/xilinx_axienet_mdio.c +++ b/drivers/net/ethernet/xilinx/xilinx_axienet_mdio.c @@ -183,7 +183,8 @@ int axienet_mdio_setup(struct axienet_local *lp, struct device_node *np) clk_div = (host_clock / (MAX_MDIO_FREQ * 2)) - 1; /* If there is any remainder from the division of * fHOST / (MAX_MDIO_FREQ * 2), then we need to add - * 1 to the clock divisor or we will surely be above 2.5 MHz */ + * 1 to the clock divisor or we will surely be above 2.5 MHz + */ if (host_clock % (MAX_MDIO_FREQ * 2)) clk_div++; -- 2.3.5 -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/