Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1751643AbbEGOKD (ORCPT ); Thu, 7 May 2015 10:10:03 -0400 Received: from mx2.parallels.com ([199.115.105.18]:44296 "EHLO mx2.parallels.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1751294AbbEGOJ6 (ORCPT ); Thu, 7 May 2015 10:09:58 -0400 From: Vladimir Davydov To: Andrew Morton CC: Minchan Kim , Johannes Weiner , Michal Hocko , Greg Thelen , Michel Lespinasse , David Rientjes , Pavel Emelyanov , Cyrill Gorcunov , Jonathan Corbet , , , , , Subject: [PATCH v4 0/3] idle memory tracking Date: Thu, 7 May 2015 17:09:39 +0300 Message-ID: X-Mailer: git-send-email 1.7.10.4 MIME-Version: 1.0 Content-Type: text/plain Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 9351 Lines: 255 Hi, This patch set introduces a new user API for tracking user memory pages that have not been used for a given period of time. The purpose of this is to provide the userspace with the means of tracking a workload's working set, i.e. the set of pages that are actively used by the workload. Knowing the working set size can be useful for partitioning the system more efficiently, e.g. by tuning memory cgroup limits appropriately, or for job placement within a compute cluster. ---- USE CASES ---- The unified cgroup hierarchy has memory.low and memory.high knobs, which are defined as the low and high boundaries for the workload working set size. However, the working set size of a workload may be unknown or change in time. With this patch set, one can periodically estimate the amount of memory unused by each cgroup and tune their memory.low and memory.high parameters accordingly, therefore optimizing the overall memory utilization. Another use case is balancing workloads within a compute cluster. Knowing how much memory is not really used by a workload unit may help take a more optimal decision when considering migrating the unit to another node within the cluster. Also, as noted by Minchan, this would be useful for per-process reclaim (https://lwn.net/Articles/545668/). With idle tracking, we could reclaim idle pages only by smart user memory manager. ---- USER API ---- The user API consists of two new proc files: * /proc/kpageidle. This file implements a bitmap where each bit corresponds to a page, indexed by PFN. When the bit is set, the corresponding page is idle. A page is considered idle if it has not been accessed since it was marked idle. To mark a page idle one should set the bit corresponding to the page by writing to the file. A value written to the file is OR-ed with the current bitmap value. Only user memory pages can be marked idle, for other page types input is silently ignored. Writing to this file beyond max PFN results in the ENXIO error. Only available when CONFIG_IDLE_PAGE_TRACKING is set. This file can be used to estimate the amount of pages that are not used by a particular workload as follows: 1. mark all pages of interest idle by setting corresponding bits in the /proc/kpageidle bitmap 2. wait until the workload accesses its working set 3. read /proc/kpageidle and count the number of bits set * /proc/kpagecgroup. This file contains a 64-bit inode number of the memory cgroup each page is charged to, indexed by PFN. Only available when CONFIG_MEMCG is set. This file can be used to find all pages (including unmapped file pages) accounted to a particular cgroup. Using /proc/kpageidle, one can then estimate the cgroup working set size. For an example of using these files for estimating the amount of unused memory pages per each memory cgroup, please see the script attached below. ---- REASONING ---- The reason to introduce the new user API instead of using /proc/PID/{clear_refs,smaps} is that the latter has two serious drawbacks: - it does not count unmapped file pages - it affects the reclaimer logic The new API attempts to overcome them both. For more details on how it is achieved, please see the comment to patch 3. ---- CHANGE LOG ---- Changes in v4: This iteration primarily addresses Minchan's comments to v3: - Implement /proc/kpageidle as a bitmap instead of using u64 per each page, because there does not seem to be any future uses for the other 63 bits. - Do not double-increase pra->referenced in page_referenced_one() if the page was young and referenced recently. - Remove the pointless (page_count == 0) check from kpageidle_get_page(). - Rename kpageidle_clear_refs() to kpageidle_clear_pte_refs(). - Improve comments to kpageidle-related functions. - Rebase on top of 4.1-rc2. Note it does not address Minchan's concern of possible __page_set_anon_rmap vs page_referenced race (see https://lkml.org/lkml/2015/5/3/220) since it is still unclear if this race can really happen (see https://lkml.org/lkml/2015/5/4/160) Changes in v3: - Enable CONFIG_IDLE_PAGE_TRACKING for 32 bit. Since this feature requires two extra page flags and there is no space for them on 32 bit, page ext is used (thanks to Minchan Kim). - Minor code cleanups and comments improved. - Rebase on top of 4.1-rc1. Changes in v2: - The main difference from v1 is the API change. In v1 the user can only set the idle flag for all pages at once, and for clearing the Idle flag on pages accessed via page tables /proc/PID/clear_refs should be used. The main drawback of the v1 approach, as noted by Minchan, is that on big machines setting the idle flag for each pages can result in CPU bursts, which would be especially frustrating if the user only wanted to estimate the amount of idle pages for a particular process or VMA. With the new API a more fine-grained approach is possible: one can read a process's /proc/PID/pagemap and set/check the Idle flag only for those pages of the process's address space he or she is interested in. Another good point about the v2 API is that it is possible to limit /proc/kpage* scanning rate when the user wants to estimate the total number of idle pages, which is unachievable with the v1 approach. - Make /proc/kpagecgroup return the ino of the closest online ancestor in case the cgroup a page is charged to is offline. - Fix /proc/PID/clear_refs not clearing Young page flag. - Rebase on top of v4.0-rc6-mmotm-2015-04-01-14-54 v3: https://lkml.org/lkml/2015/4/28/224 v2: https://lkml.org/lkml/2015/4/7/260 v1: https://lkml.org/lkml/2015/3/18/794 ---- PATCH SET STRUCTURE ---- The patch set is organized as follows: - patch 1 adds page_cgroup_ino() helper for the sake of /proc/kpagecgroup - patch 2 adds /proc/kpagecgroup, which reports cgroup ino each page is charged to - patch 3 implements the idle page tracking feature, including the userspace API, /proc/kpageidle ---- SIMILAR WORKS ---- Originally, the patch for tracking idle memory was proposed back in 2011 by Michel Lespinasse (see http://lwn.net/Articles/459269/). The main difference between Michel's patch and this one is that Michel implemented a kernel space daemon for estimating idle memory size per cgroup while this patch only provides the userspace with the minimal API for doing the job, leaving the rest up to the userspace. However, they both share the same idea of Idle/Young page flags to avoid affecting the reclaimer logic. ---- SCRIPT FOR COUNTING IDLE PAGES PER CGROUP ---- #! /usr/bin/python # import os import stat import errno import struct CGROUP_MOUNT = "/sys/fs/cgroup/memory" def set_idle(): f = open("/proc/kpageidle", "wb") while True: try: f.write(struct.pack("Q", pow(2, 64) - 1)) except IOError as err: if err.errno == errno.ENXIO: break raise f.close() def count_idle(): f_idle = open("/proc/kpageidle", "rb") f_flags = open("/proc/kpageflags", "rb") f_cgroup = open("/proc/kpagecgroup", "rb") pfn = 0 nr_idle = {} while True: if not pfn % 64: s = f_idle.read(8) if not s: break idle_bitmap = struct.unpack('Q', s)[0] idle = idle_bitmap & 1 idle_bitmap >>= 1 pfn += 1 flags = struct.unpack('Q', f_flags.read(8))[0] cgino = struct.unpack('Q', f_cgroup.read(8))[0] unevictable = flags >> 18 & 1 huge = flags >> 22 & 1 if idle and not unevictable: nr_idle[cgino] = nr_idle.get(cgino, 0) + (512 if huge else 1) f_flags.close() f_cgroup.close() f_idle.close() return nr_idle print "Setting the idle flag for each page..." set_idle() raw_input("Wait until the workload accesses its working set, then press Enter") print "Counting idle pages..." nr_idle = count_idle() for dir, subdirs, files in os.walk(CGROUP_MOUNT): ino = os.stat(dir)[stat.ST_INO] print dir + ": " + str(nr_idle.get(ino, 0) * 4) + " KB" ---- END SCRIPT ---- Comments are more than welcome. Thanks, Vladimir Davydov (3): memcg: add page_cgroup_ino helper proc: add kpagecgroup file proc: add kpageidle file Documentation/vm/pagemap.txt | 16 ++- fs/proc/Kconfig | 5 +- fs/proc/page.c | 224 ++++++++++++++++++++++++++++++++++++++++++ fs/proc/task_mmu.c | 4 +- include/linux/memcontrol.h | 8 +- include/linux/mm.h | 88 +++++++++++++++++ include/linux/page-flags.h | 9 ++ include/linux/page_ext.h | 4 + mm/Kconfig | 12 +++ mm/debug.c | 4 + mm/hwpoison-inject.c | 5 +- mm/memcontrol.c | 73 +++++++------- mm/memory-failure.c | 16 +-- mm/page_ext.c | 3 + mm/rmap.c | 8 ++ mm/swap.c | 2 + 16 files changed, 417 insertions(+), 64 deletions(-) -- 1.7.10.4 -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/