Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S932323AbbEHSad (ORCPT ); Fri, 8 May 2015 14:30:33 -0400 Received: from saturn.retrosnub.co.uk ([178.18.118.26]:52549 "EHLO saturn.retrosnub.co.uk" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S932137AbbEHSaY (ORCPT ); Fri, 8 May 2015 14:30:24 -0400 Message-ID: <554CCE59.4000903@kernel.org> Date: Fri, 08 May 2015 10:55:21 -0400 From: Jonathan Cameron User-Agent: Mozilla/5.0 (X11; Linux x86_64; rv:31.0) Gecko/20100101 Thunderbird/31.6.0 MIME-Version: 1.0 To: Tomasz Duszynski CC: knaack.h@gmx.de, lars@metafoo.de, pmeerw@pmeerw.net, linux-kernel@vger.kernel.org, linux-iio@vger.kernel.org Subject: Re: [PATCH v4] iio: light: add support for ROHM BH1710/BH1715/BH1721/BH1750/BH1751 ambient light sensors References: <1430678241-19651-1-git-send-email-tduszyns@gmail.com> In-Reply-To: <1430678241-19651-1-git-send-email-tduszyns@gmail.com> Content-Type: text/plain; charset=windows-1252 Content-Transfer-Encoding: 7bit Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 12329 Lines: 419 On 03/05/15 14:37, Tomasz Duszynski wrote: > Add support for ROHM BH1710/BH1715/BH1721/BH1750/BH1751 ambient light > sensors. > > Signed-off-by: Tomasz Duszynski Applied to the togreg branch of iio.git which will be pushed out as testing when I have an internet connection that does more than https... Anyhow, nice driver, thanks! > --- > Changes in v4: > - Minor changes in module documentation > - Use be16_to_cpu instead of swab16 for clarity > > Changes in v3: > - Do some code cleanup > - Add comments to clarify non-intuitive driver parts > - Return proper scale value [lx / count] to userspace. In previous > patches scale inverse was returned. > > Changes in v2: > - Store chip-dependent values in chip_info structure > - Add bh1750_remove to power down chip (necessary for BH1721) > - Use one time mode for chips that have support for that > - Use IIO_LIGHT instead of IIO_INTENSITY for channel type > > drivers/iio/light/Kconfig | 10 ++ > drivers/iio/light/Makefile | 1 + > drivers/iio/light/bh1750.c | 334 +++++++++++++++++++++++++++++++++++++++++++++ > 3 files changed, 345 insertions(+) > create mode 100644 drivers/iio/light/bh1750.c > > diff --git a/drivers/iio/light/Kconfig b/drivers/iio/light/Kconfig > index 5a3237b..ebc578a 100644 > --- a/drivers/iio/light/Kconfig > +++ b/drivers/iio/light/Kconfig > @@ -37,6 +37,16 @@ config APDS9300 > To compile this driver as a module, choose M here: the > module will be called apds9300. > > +config BH1750 > + tristate "ROHM BH1750 ambient light sensor" > + depends on I2C > + help > + Say Y here to build support for the ROHM BH1710, BH1715, BH1721, > + BH1750, BH1751 ambient light sensors. > + > + To compile this driver as a module, choose M here: the module will > + be called bh1750. > + > config CM32181 > depends on I2C > tristate "CM32181 driver" > diff --git a/drivers/iio/light/Makefile b/drivers/iio/light/Makefile > index 74656c1..1a13184 100644 > --- a/drivers/iio/light/Makefile > +++ b/drivers/iio/light/Makefile > @@ -6,6 +6,7 @@ > obj-$(CONFIG_ADJD_S311) += adjd_s311.o > obj-$(CONFIG_AL3320A) += al3320a.o > obj-$(CONFIG_APDS9300) += apds9300.o > +obj-$(CONFIG_BH1750) += bh1750.o > obj-$(CONFIG_CM32181) += cm32181.o > obj-$(CONFIG_CM36651) += cm36651.o > obj-$(CONFIG_GP2AP020A00F) += gp2ap020a00f.o > diff --git a/drivers/iio/light/bh1750.c b/drivers/iio/light/bh1750.c > new file mode 100644 > index 0000000..564c2b3 > --- /dev/null > +++ b/drivers/iio/light/bh1750.c > @@ -0,0 +1,334 @@ > +/* > + * ROHM BH1710/BH1715/BH1721/BH1750/BH1751 ambient light sensor driver > + * > + * Copyright (c) Tomasz Duszynski > + * > + * This program is free software; you can redistribute it and/or modify > + * it under the terms of the GNU General Public License version 2 as > + * published by the Free Software Foundation. > + * > + * Data sheets: > + * http://rohmfs.rohm.com/en/products/databook/datasheet/ic/sensor/light/bh1710fvc-e.pdf > + * http://rohmfs.rohm.com/en/products/databook/datasheet/ic/sensor/light/bh1715fvc-e.pdf > + * http://rohmfs.rohm.com/en/products/databook/datasheet/ic/sensor/light/bh1721fvc-e.pdf > + * http://rohmfs.rohm.com/en/products/databook/datasheet/ic/sensor/light/bh1750fvi-e.pdf > + * http://rohmfs.rohm.com/en/products/databook/datasheet/ic/sensor/light/bh1751fvi-e.pdf > + * > + * 7-bit I2C slave addresses: > + * 0x23 (ADDR pin low) > + * 0x5C (ADDR pin high) > + * > + */ > + > +#include > +#include > +#include > +#include > +#include > + > +#define BH1750_POWER_DOWN 0x00 > +#define BH1750_ONE_TIME_H_RES_MODE 0x20 /* auto-mode for BH1721 */ > +#define BH1750_CHANGE_INT_TIME_H_BIT 0x40 > +#define BH1750_CHANGE_INT_TIME_L_BIT 0x60 > + > +enum { > + BH1710, > + BH1721, > + BH1750, > +}; > + > +struct bh1750_chip_info; > +struct bh1750_data { > + struct i2c_client *client; > + struct mutex lock; > + const struct bh1750_chip_info *chip_info; > + u16 mtreg; > +}; > + > +struct bh1750_chip_info { > + u16 mtreg_min; > + u16 mtreg_max; > + u16 mtreg_default; > + int mtreg_to_usec; > + int mtreg_to_scale; > + > + /* > + * For BH1710/BH1721 all possible integration time values won't fit > + * into one page so displaying is limited to every second one. > + * Note, that user can still write proper values which were not > + * listed. > + */ > + int inc; > + > + u16 int_time_low_mask; > + u16 int_time_high_mask; > +} > + > +static const bh1750_chip_info_tbl[] = { > + [BH1710] = { 140, 1022, 300, 400, 250000000, 2, 0x001F, 0x03E0 }, > + [BH1721] = { 140, 1020, 300, 400, 250000000, 2, 0x0010, 0x03E0 }, > + [BH1750] = { 31, 254, 69, 1740, 57500000, 1, 0x001F, 0x00E0 }, > +}; > + > +static int bh1750_change_int_time(struct bh1750_data *data, int usec) > +{ > + int ret; > + u16 val; > + u8 regval; > + const struct bh1750_chip_info *chip_info = data->chip_info; > + > + if ((usec % chip_info->mtreg_to_usec) != 0) > + return -EINVAL; > + > + val = usec / chip_info->mtreg_to_usec; > + if (val < chip_info->mtreg_min || val > chip_info->mtreg_max) > + return -EINVAL; > + > + ret = i2c_smbus_write_byte(data->client, BH1750_POWER_DOWN); > + if (ret < 0) > + return ret; > + > + regval = (val & chip_info->int_time_high_mask) >> 5; > + ret = i2c_smbus_write_byte(data->client, > + BH1750_CHANGE_INT_TIME_H_BIT | regval); > + if (ret < 0) > + return ret; > + > + regval = val & chip_info->int_time_low_mask; > + ret = i2c_smbus_write_byte(data->client, > + BH1750_CHANGE_INT_TIME_L_BIT | regval); > + if (ret < 0) > + return ret; > + > + data->mtreg = val; > + > + return 0; > +} > + > +static int bh1750_read(struct bh1750_data *data, int *val) > +{ > + int ret; > + __be16 result; > + const struct bh1750_chip_info *chip_info = data->chip_info; > + unsigned long delay = chip_info->mtreg_to_usec * data->mtreg; > + > + /* > + * BH1721 will enter continuous mode on receiving this command. > + * Note, that this eliminates need for bh1750_resume(). > + */ > + ret = i2c_smbus_write_byte(data->client, BH1750_ONE_TIME_H_RES_MODE); > + if (ret < 0) > + return ret; > + > + usleep_range(delay + 15000, delay + 40000); > + > + ret = i2c_master_recv(data->client, (char *)&result, 2); > + if (ret < 0) > + return ret; > + > + *val = be16_to_cpu(result); > + > + return 0; > +} > + > +static int bh1750_read_raw(struct iio_dev *indio_dev, > + struct iio_chan_spec const *chan, > + int *val, int *val2, long mask) > +{ > + int ret, tmp; > + struct bh1750_data *data = iio_priv(indio_dev); > + const struct bh1750_chip_info *chip_info = data->chip_info; > + > + switch (mask) { > + case IIO_CHAN_INFO_RAW: > + switch (chan->type) { > + case IIO_LIGHT: > + mutex_lock(&data->lock); > + ret = bh1750_read(data, val); > + mutex_unlock(&data->lock); > + if (ret < 0) > + return ret; > + > + return IIO_VAL_INT; > + default: > + return -EINVAL; > + } > + case IIO_CHAN_INFO_SCALE: > + tmp = chip_info->mtreg_to_scale / data->mtreg; > + *val = tmp / 1000000; > + *val2 = tmp % 1000000; > + return IIO_VAL_INT_PLUS_MICRO; > + case IIO_CHAN_INFO_INT_TIME: > + *val = 0; > + *val2 = chip_info->mtreg_to_usec * data->mtreg; > + return IIO_VAL_INT_PLUS_MICRO; > + default: > + return -EINVAL; > + } > +} > + > +static int bh1750_write_raw(struct iio_dev *indio_dev, > + struct iio_chan_spec const *chan, > + int val, int val2, long mask) > +{ > + int ret; > + struct bh1750_data *data = iio_priv(indio_dev); > + > + switch (mask) { > + case IIO_CHAN_INFO_INT_TIME: > + if (val != 0) > + return -EINVAL; > + > + mutex_lock(&data->lock); > + ret = bh1750_change_int_time(data, val2); > + mutex_unlock(&data->lock); > + return ret; > + default: > + return -EINVAL; > + } > +} > + > +static ssize_t bh1750_show_int_time_available(struct device *dev, > + struct device_attribute *attr, char *buf) > +{ > + int i; > + size_t len = 0; > + struct bh1750_data *data = iio_priv(dev_to_iio_dev(dev)); > + const struct bh1750_chip_info *chip_info = data->chip_info; > + > + for (i = chip_info->mtreg_min; i <= chip_info->mtreg_max; i += chip_info->inc) > + len += scnprintf(buf + len, PAGE_SIZE - len, "0.%06d ", > + chip_info->mtreg_to_usec * i); > + > + buf[len - 1] = '\n'; > + > + return len; > +} > + > +static IIO_DEV_ATTR_INT_TIME_AVAIL(bh1750_show_int_time_available); > + > +static struct attribute *bh1750_attributes[] = { > + &iio_dev_attr_integration_time_available.dev_attr.attr, > + NULL, > +}; > + > +static struct attribute_group bh1750_attribute_group = { > + .attrs = bh1750_attributes, > +}; > + > +static const struct iio_info bh1750_info = { > + .driver_module = THIS_MODULE, > + .attrs = &bh1750_attribute_group, > + .read_raw = bh1750_read_raw, > + .write_raw = bh1750_write_raw, > +}; > + > +static const struct iio_chan_spec bh1750_channels[] = { > + { > + .type = IIO_LIGHT, > + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | > + BIT(IIO_CHAN_INFO_SCALE) | > + BIT(IIO_CHAN_INFO_INT_TIME) > + } > +}; > + > +static int bh1750_probe(struct i2c_client *client, > + const struct i2c_device_id *id) > +{ > + int ret, usec; > + struct bh1750_data *data; > + struct iio_dev *indio_dev; > + > + if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C | > + I2C_FUNC_SMBUS_WRITE_BYTE)) > + return -ENODEV; > + > + indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*data)); > + if (!indio_dev) > + return -ENOMEM; > + > + data = iio_priv(indio_dev); > + i2c_set_clientdata(client, indio_dev); > + data->client = client; > + data->chip_info = &bh1750_chip_info_tbl[id->driver_data]; > + > + usec = data->chip_info->mtreg_to_usec * data->chip_info->mtreg_default; > + ret = bh1750_change_int_time(data, usec); > + if (ret < 0) > + return ret; > + > + mutex_init(&data->lock); > + indio_dev->dev.parent = &client->dev; > + indio_dev->info = &bh1750_info; > + indio_dev->name = id->name; > + indio_dev->channels = bh1750_channels; > + indio_dev->num_channels = ARRAY_SIZE(bh1750_channels); > + indio_dev->modes = INDIO_DIRECT_MODE; > + > + return iio_device_register(indio_dev); > +} > + > +static int bh1750_remove(struct i2c_client *client) > +{ > + struct iio_dev *indio_dev = i2c_get_clientdata(client); > + struct bh1750_data *data = iio_priv(indio_dev); > + > + iio_device_unregister(indio_dev); > + > + mutex_lock(&data->lock); > + i2c_smbus_write_byte(client, BH1750_POWER_DOWN); > + mutex_unlock(&data->lock); > + > + return 0; > +} > + > +#ifdef CONFIG_PM_SLEEP > +static int bh1750_suspend(struct device *dev) > +{ > + int ret; > + struct bh1750_data *data = > + iio_priv(i2c_get_clientdata(to_i2c_client(dev))); > + > + /* > + * This is mainly for BH1721 which doesn't enter power down > + * mode automatically. > + */ > + mutex_lock(&data->lock); > + ret = i2c_smbus_write_byte(data->client, BH1750_POWER_DOWN); > + mutex_unlock(&data->lock); > + > + return ret; > +} > + > +static SIMPLE_DEV_PM_OPS(bh1750_pm_ops, bh1750_suspend, NULL); > +#define BH1750_PM_OPS (&bh1750_pm_ops) > +#else > +#define BH1750_PM_OPS NULL > +#endif > + > +static const struct i2c_device_id bh1750_id[] = { > + { "bh1710", BH1710 }, > + { "bh1715", BH1750 }, > + { "bh1721", BH1721 }, > + { "bh1750", BH1750 }, > + { "bh1751", BH1750 }, > + { } > +}; > +MODULE_DEVICE_TABLE(i2c, bh1750_id); > + > +static struct i2c_driver bh1750_driver = { > + .driver = { > + .name = "bh1750", > + .owner = THIS_MODULE, > + .pm = BH1750_PM_OPS, > + }, > + .probe = bh1750_probe, > + .remove = bh1750_remove, > + .id_table = bh1750_id, > + > +}; > +module_i2c_driver(bh1750_driver); > + > +MODULE_AUTHOR("Tomasz Duszynski "); > +MODULE_DESCRIPTION("ROHM BH1710/BH1715/BH1721/BH1750/BH1751 als driver"); > +MODULE_LICENSE("GPL v2"); > -- > 2.3.6 > > -- > To unsubscribe from this list: send the line "unsubscribe linux-iio" in > the body of a message to majordomo@vger.kernel.org > More majordomo info at http://vger.kernel.org/majordomo-info.html > -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/