Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S932350AbbEHPIM (ORCPT ); Fri, 8 May 2015 11:08:12 -0400 Received: from mail1.asahi-net.or.jp ([202.224.39.197]:53464 "EHLO mail1.asahi-net.or.jp" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1752883AbbEHPEx (ORCPT ); Fri, 8 May 2015 11:04:53 -0400 From: Yoshinori Sato To: linux-kernel@vger.kernel.org, linux-arch@vger.kernel.org Cc: Yoshinori Sato Subject: [PATCH v11 09/19] h8300: kernel booting Date: Sat, 9 May 2015 00:04:29 +0900 Message-Id: <1431097479-21101-10-git-send-email-ysato@users.sourceforge.jp> X-Mailer: git-send-email 2.1.4 In-Reply-To: <1431097479-21101-1-git-send-email-ysato@users.sourceforge.jp> References: <1431097479-21101-1-git-send-email-ysato@users.sourceforge.jp> Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 16371 Lines: 712 zImage startup / kernel entry point / arch depend startup Signed-off-by: Yoshinori Sato --- arch/h8300/boot/Makefile | 26 ++++ arch/h8300/boot/compressed/Makefile | 37 ++++++ arch/h8300/boot/compressed/head.S | 48 +++++++ arch/h8300/boot/compressed/misc.c | 74 +++++++++++ arch/h8300/boot/compressed/vmlinux.lds | 32 +++++ arch/h8300/boot/compressed/vmlinux.scr | 9 ++ arch/h8300/kernel/head_ram.S | 60 +++++++++ arch/h8300/kernel/head_rom.S | 110 ++++++++++++++++ arch/h8300/kernel/setup.c | 230 +++++++++++++++++++++++++++++++++ 9 files changed, 626 insertions(+) create mode 100644 arch/h8300/boot/Makefile create mode 100644 arch/h8300/boot/compressed/Makefile create mode 100644 arch/h8300/boot/compressed/head.S create mode 100644 arch/h8300/boot/compressed/misc.c create mode 100644 arch/h8300/boot/compressed/vmlinux.lds create mode 100644 arch/h8300/boot/compressed/vmlinux.scr create mode 100644 arch/h8300/kernel/head_ram.S create mode 100644 arch/h8300/kernel/head_rom.S create mode 100644 arch/h8300/kernel/setup.c diff --git a/arch/h8300/boot/Makefile b/arch/h8300/boot/Makefile new file mode 100644 index 0000000..2f6393a --- /dev/null +++ b/arch/h8300/boot/Makefile @@ -0,0 +1,26 @@ +# arch/h8300/boot/Makefile + +targets := vmlinux.srec vmlinux.bin zImage +subdir- := compressed + +OBJCOPYFLAGS_vmlinux.srec := -Osrec +OBJCOPYFLAGS_vmlinux.bin := -Obinary +OBJCOPYFLAGS_zImage := -O binary -R .note -R .comment -R .stab -R .stabstr -S + +UIMAGE_LOADADDR = $(CONFIG_RAMBASE) +UIMAGE_ENTRYADDR = $(shell /bin/bash -c 'printf "0x%08x" \ + $$[$(CONFIG_RAMBASE) + $(CONFIG_OFFSET)]') + +$(obj)/vmlinux.srec $(obj)/vmlinux.bin: vmlinux FORCE + $(call if_changed,objcopy) + +$(obj)/zImage: $(obj)/compressed/vmlinux FORCE + $(call if_changed,objcopy) + +$(obj)/compressed/vmlinux: FORCE + $(Q)$(MAKE) $(build)=$(obj)/compressed $@ + +$(obj)/uImage.bin: $(obj)/vmlinux.bin + $(call if_changed,uimage,none) + +CLEAN_FILES += arch/$(ARCH)/vmlinux.bin arch/$(ARCH)/vmlinux.srec arch/$(ARCH)/uImage.bin diff --git a/arch/h8300/boot/compressed/Makefile b/arch/h8300/boot/compressed/Makefile new file mode 100644 index 0000000..87d03b7 --- /dev/null +++ b/arch/h8300/boot/compressed/Makefile @@ -0,0 +1,37 @@ +# +# linux/arch/sh/boot/compressed/Makefile +# +# create a compressed vmlinux image from the original vmlinux +# + +targets := vmlinux vmlinux.bin vmlinux.bin.gz head.o misc.o piggy.o + +OBJECTS = $(obj)/head.o $(obj)/misc.o + +# +# IMAGE_OFFSET is the load offset of the compression loader +# Assign dummy values if these 2 variables are not defined, +# in order to suppress error message. +# +CONFIG_MEMORY_START ?= 0x00400000 +CONFIG_BOOT_LINK_OFFSET ?= 0x00140000 +IMAGE_OFFSET := $(shell printf "0x%08x" $$(($(CONFIG_MEMORY_START)+$(CONFIG_BOOT_LINK_OFFSET)))) + +LIBGCC := $(shell $(CROSS-COMPILE)$(CC) $(KBUILD_CFLAGS) -print-libgcc-file-name) +LDFLAGS_vmlinux := -Ttext $(IMAGE_OFFSET) -estartup $(obj)/vmlinux.lds + +$(obj)/vmlinux: $(OBJECTS) $(obj)/piggy.o $(LIBGCC) FORCE + $(call if_changed,ld) + @: + +$(obj)/vmlinux.bin: vmlinux FORCE + $(call if_changed,objcopy) + +$(obj)/vmlinux.bin.gz: $(obj)/vmlinux.bin FORCE + $(call if_changed,gzip) + +LDFLAGS_piggy.o := -r --format binary --oformat elf32-h8300-linux -T +OBJCOPYFLAGS := -O binary + +$(obj)/piggy.o: $(obj)/vmlinux.scr $(obj)/vmlinux.bin.gz FORCE + $(call if_changed,ld) diff --git a/arch/h8300/boot/compressed/head.S b/arch/h8300/boot/compressed/head.S new file mode 100644 index 0000000..74c0d8cc --- /dev/null +++ b/arch/h8300/boot/compressed/head.S @@ -0,0 +1,48 @@ +/* + * linux/arch/h8300/boot/compressed/head.S + * + * Copyright (C) 2006 Yoshinori Sato + */ + +#include + + .section .text..startup,"ax" + .global startup +startup: + mov.l er0, er4 + mov.l er0, sp + mov.l #__sbss, er0 + mov.l #__ebss, er1 + sub.l er0, er1 + shlr er1 + shlr er1 + sub.l er2, er2 +1: + mov.l er2, @er0 + adds #4, er0 + dec.l #1, er1 + bne 1b + jsr @decompress_kernel + mov.l er4, er0 + jmp @0x400000 + + .align 9 +fake_headers_as_bzImage: + .word 0 + .ascii "HdrS" ; header signature + .word 0x0202 ; header version number (>= 0x0105) + ; or else old loadlin-1.5 will fail) + .word 0 ; default_switch + .word 0 ; SETUPSEG + .word 0x1000 + .word 0 ; pointing to kernel version string + .byte 0 ; = 0, old one (LILO, Loadlin, + ; 0xTV: T=0 for LILO + ; V = version + .byte 1 ; Load flags bzImage=1 + .word 0x8000 ; size to move, when setup is not + .long 0x100000 ; 0x100000 = default for big kernel + .long 0 ; address of loaded ramdisk image + .long 0 ; its size in bytes + + .end diff --git a/arch/h8300/boot/compressed/misc.c b/arch/h8300/boot/compressed/misc.c new file mode 100644 index 0000000..7042741 --- /dev/null +++ b/arch/h8300/boot/compressed/misc.c @@ -0,0 +1,74 @@ +/* + * arch/h8300/boot/compressed/misc.c + * + * This is a collection of several routines from gzip-1.0.3 + * adapted for Linux. + * + * malloc by Hannu Savolainen 1993 and Matthias Urlichs 1994 + * + * Adapted for h8300 by Yoshinori Sato 2006 + */ + +#include + +/* + * gzip declarations + */ + +#define OF(args) args +#define STATIC static + +#undef memset +#undef memcpy +#define memzero(s, n) memset((s), (0), (n)) + +extern int _end; +static unsigned long free_mem_ptr; +static unsigned long free_mem_end_ptr; + +extern char input_data[]; +extern int input_len; +static unsigned char *output; + +#define HEAP_SIZE 0x10000 + +#include "../../../../lib/decompress_inflate.c" + +void *memset(void *s, int c, size_t n) +{ + int i; + char *ss = (char *)s; + + for (i = 0; i < n; i++) + ss[i] = c; + return s; +} + +void *memcpy(void *dest, const void *src, size_t n) +{ + int i; + char *d = (char *)dest, *s = (char *)src; + + for (i = 0; i < n; i++) + d[i] = s[i]; + return dest; +} + +static void error(char *x) +{ + + while (1) + ; /* Halt */ +} + +#define STACK_SIZE (4096) +long user_stack[STACK_SIZE]; +long *stack_start = &user_stack[STACK_SIZE]; + +void decompress_kernel(void) +{ + free_mem_ptr = (unsigned long)&_end; + free_mem_end_ptr = free_mem_ptr + HEAP_SIZE; + + decompress(input_data, input_len, NULL, NULL, output, NULL, error); +} diff --git a/arch/h8300/boot/compressed/vmlinux.lds b/arch/h8300/boot/compressed/vmlinux.lds new file mode 100644 index 0000000..a0a3a0e --- /dev/null +++ b/arch/h8300/boot/compressed/vmlinux.lds @@ -0,0 +1,32 @@ +SECTIONS +{ + .text : + { + __stext = . ; + __text = .; + *(.text..startup) + *(.text) + __etext = . ; + } + + .rodata : + { + *(.rodata) + } + .data : + + { + __sdata = . ; + ___data_start = . ; + *(.data.*) + } + .bss : + { + . = ALIGN(0x4) ; + __sbss = . ; + *(.bss*) + . = ALIGN(0x4) ; + __ebss = . ; + __end = . ; + } +} diff --git a/arch/h8300/boot/compressed/vmlinux.scr b/arch/h8300/boot/compressed/vmlinux.scr new file mode 100644 index 0000000..a0849036 --- /dev/null +++ b/arch/h8300/boot/compressed/vmlinux.scr @@ -0,0 +1,9 @@ +SECTIONS +{ + .data : { + input_len = .; + LONG(input_data_end - input_data) input_data = .; + *(.data) + input_data_end = .; + } +} diff --git a/arch/h8300/kernel/head_ram.S b/arch/h8300/kernel/head_ram.S new file mode 100644 index 0000000..84ac5c3 --- /dev/null +++ b/arch/h8300/kernel/head_ram.S @@ -0,0 +1,60 @@ + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#if defined(CONFIG_CPU_H8300H) + .h8300h +#define SYSCR 0xfee012 +#define IRAMTOP 0xffff20 +#endif +#if defined(CONFIG_CPU_H8S) + .h8300s +#define INTCR 0xffff31 +#define IRAMTOP 0xffc000 +#endif + + __HEAD + .global _start +_start: + mov.l #IRAMTOP,sp + /* .bss clear */ + mov.l #_sbss,er5 + mov.l #_ebss,er4 + sub.l er5,er4 + shlr er4 + shlr er4 + sub.l er2,er2 +1: + mov.l er2,@er5 + adds #4,er5 + dec.l #1,er4 + bne 1b + jsr @h8300_fdt_init + + /* linux kernel start */ +#if defined(CONFIG_CPU_H8300H) + ldc #0xd0,ccr /* running kernel */ + mov.l #SYSCR,er0 + bclr #3,@er0 +#endif +#if defined(CONFIG_CPU_H8S) + ldc #0x07,exr + bclr #4,@INTCR:8 + bset #5,@INTCR:8 /* Interrupt mode 2 */ + ldc #0x90,ccr /* running kernel */ +#endif + mov.l #init_thread_union,sp + add.l #0x2000,sp + jsr @start_kernel + +1: + bra 1b + + .end diff --git a/arch/h8300/kernel/head_rom.S b/arch/h8300/kernel/head_rom.S new file mode 100644 index 0000000..9868a41 --- /dev/null +++ b/arch/h8300/kernel/head_rom.S @@ -0,0 +1,110 @@ +#include +#include + +#if defined(CONFIG_CPU_H8300H) + .h8300h +#define SYSCR 0xfee012 +#define IRAMTOP 0xffff20 +#define NR_INT 64 +#endif +#if defined(CONFIG_CPU_H8S) + .h8300s +#define INTCR 0xffff31 +#define IRAMTOP 0xffc000 +#define NR_INT 128 +#endif + + __HEAD + .global _start +_start: + mov.l #IRAMTOP,sp +#if !defined(CONFIG_H8300H_SIM) && \ + !defined(CONFIG_H8S_SIM) + jsr @lowlevel_init + + /* copy .data */ + mov.l #_begin_data,er5 + mov.l #_sdata,er6 + mov.l #_edata,er4 + sub.l er6,er4 + shlr.l er4 + shlr.l er4 +1: + mov.l @er5+,er0 + mov.l er0,@er6 + adds #4,er6 + dec.l #1,er4 + bne 1b + /* .bss clear */ + mov.l #_sbss,er5 + mov.l #_ebss,er4 + sub.l er5,er4 + shlr er4 + shlr er4 + sub.l er0,er0 +1: + mov.l er0,@er5 + adds #4,er5 + dec.l #1,er4 + bne 1b +#else + /* get cmdline from gdb */ + jsr @0xcc + ;; er0 - argc + ;; er1 - argv + mov.l #command_line,er3 + adds #4,er1 + dec.l #1,er0 + beq 4f +1: + mov.l @er1+,er2 +2: + mov.b @er2+,r4l + beq 3f + mov.b r4l,@er3 + adds #1,er3 + bra 2b +3: + mov.b #' ',r4l + mov.b r4l,@er3 + adds #1,er3 + dec.l #1,er0 + bne 1b + subs #1,er3 + mov.b #0,r4l + mov.b r4l,@er3 +4: +#endif + sub.l er0,er0 + jsr @h8300_fdt_init + /* linux kernel start */ +#if defined(CONFIG_CPU_H8300H) + ldc #0xd0,ccr /* running kernel */ + mov.l #SYSCR,er0 + bclr #3,@er0 +#endif +#if defined(CONFIG_CPU_H8S) + ldc #0x07,exr + bclr #4,@INTCR:8 + bset #5,@INTCR:8 /* Interrupt mode 2 */ + ldc #0x90,ccr /* running kernel */ +#endif + mov.l #init_thread_union,sp + add.l #0x2000,sp + jsr @start_kernel + +1: + bra 1b + +#if defined(CONFIG_ROMKERNEL) + /* interrupt vector */ + .section .vectors,"ax" + .long _start + .long _start +vector = 2 + .rept NR_INT - 2 + .long _interrupt_redirect_table+vector*4 +vector = vector + 1 + .endr +#endif + .end diff --git a/arch/h8300/kernel/setup.c b/arch/h8300/kernel/setup.c new file mode 100644 index 0000000..93e410a --- /dev/null +++ b/arch/h8300/kernel/setup.c @@ -0,0 +1,230 @@ +/* + * linux/arch/h8300/kernel/setup.c + * + * Copyright (C) 2001-2014 Yoshinori Sato + */ + +/* + * This file handles the architecture-dependent parts of system setup + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include + +#if defined(CONFIG_CPU_H8300H) +#define CPU "H8/300H" +#elif defined(CONFIG_CPU_H8S) +#define CPU "H8S" +#else +#define CPU "Unknown" +#endif + +unsigned long memory_start; +unsigned long memory_end; +EXPORT_SYMBOL(memory_end); +static unsigned long freq; +extern char __dtb_start[]; + +#ifdef CONFIG_VT +struct screen_info screen_info; +#endif + +char __initdata command_line[COMMAND_LINE_SIZE]; + +void sim_console_register(void); + +void __init h8300_fdt_init(void *fdt, char *bootargs) +{ + if (!fdt) + fdt = __dtb_start; + else + strcpy(command_line, bootargs); + + early_init_dt_scan(fdt); + memblock_allow_resize(); +} + +static void __init bootmem_init(void) +{ + int bootmap_size; + unsigned long ram_start_pfn; + unsigned long free_ram_start_pfn; + unsigned long ram_end_pfn; + struct memblock_region *region; + + memory_end = memory_start = 0; + + /* Find main memory where is the kernel */ + for_each_memblock(memory, region) { + memory_start = region->base; + memory_end = region->base + region->size; + } + + if (!memory_end) + panic("No memory!"); + + ram_start_pfn = PFN_UP(memory_start); + /* free_ram_start_pfn is first page after kernel */ + free_ram_start_pfn = PFN_UP(__pa(_end)); + ram_end_pfn = PFN_DOWN(memblock_end_of_DRAM()); + + max_pfn = ram_end_pfn; + + /* + * give all the memory to the bootmap allocator, tell it to put the + * boot mem_map at the start of memory + */ + bootmap_size = init_bootmem_node(NODE_DATA(0), + free_ram_start_pfn, + 0, + ram_end_pfn); + /* + * free the usable memory, we have to make sure we do not free + * the bootmem bitmap so we then reserve it after freeing it :-) + */ + free_bootmem(PFN_PHYS(free_ram_start_pfn), + (ram_end_pfn - free_ram_start_pfn) << PAGE_SHIFT); + reserve_bootmem(PFN_PHYS(free_ram_start_pfn), bootmap_size, + BOOTMEM_DEFAULT); + + for_each_memblock(reserved, region) { + reserve_bootmem(region->base, region->size, BOOTMEM_DEFAULT); + } +} + +void __init setup_arch(char **cmdline_p) +{ + unflatten_and_copy_device_tree(); + + init_mm.start_code = (unsigned long) _stext; + init_mm.end_code = (unsigned long) _etext; + init_mm.end_data = (unsigned long) _edata; + init_mm.brk = (unsigned long) 0; + + pr_notice("\r\n\nuClinux " CPU "\n"); + pr_notice("Flat model support (C) 1998,1999 Kenneth Albanowski, D. Jeff Dionne\n"); + + if (*command_line) + strcpy(boot_command_line, command_line); + *cmdline_p = boot_command_line; + + parse_early_param(); + + bootmem_init(); +#if defined(CONFIG_H8300H_SIM) || defined(CONFIG_H8S_SIM) + sim_console_register(); +#endif + + early_platform_driver_probe("earlyprintk", 1, 0); + /* + * get kmalloc into gear + */ + paging_init(); +} + +/* + * Get CPU information for use by the procfs. + */ + +static int show_cpuinfo(struct seq_file *m, void *v) +{ + char *cpu; + + cpu = CPU; + + seq_printf(m, "CPU:\t\t%s\n" + "Clock:\t\t%lu.%1luMHz\n" + "BogoMips:\t%lu.%02lu\n" + "Calibration:\t%lu loops\n", + cpu, + freq/1000, freq%1000, + (loops_per_jiffy*HZ)/500000, + ((loops_per_jiffy*HZ)/5000)%100, + (loops_per_jiffy*HZ)); + + return 0; +} + +static void *c_start(struct seq_file *m, loff_t *pos) +{ + return *pos < num_possible_cpus() ? + ((void *) 0x12345678) : NULL; +} + +static void *c_next(struct seq_file *m, void *v, loff_t *pos) +{ + ++*pos; + return c_start(m, pos); +} + +static void c_stop(struct seq_file *m, void *v) +{ +} + +const struct seq_operations cpuinfo_op = { + .start = c_start, + .next = c_next, + .stop = c_stop, + .show = show_cpuinfo, +}; + +static int __init device_probe(void) +{ + of_platform_populate(NULL, NULL, NULL, NULL); + + return 0; +} + +device_initcall(device_probe); + +void __init calibrate_delay(void) +{ + struct device_node *cpu; + const int *val; + int freq; + int bus; + + cpu = of_find_compatible_node(NULL, NULL, "renesas,h8300"); + val = of_get_property(cpu, "clock-frequency", NULL); + if (!val) + panic("no cpu 'clock-frequency' parameter in device tree"); + freq = *val; + val = of_get_property(cpu, "renesas,bus-width", NULL); + if (!val) + panic("no cpu 'renesas,bus-width' parameter in device tree"); + bus = *val / 8; + loops_per_jiffy = freq / HZ / 6 / (3 - bus); + pr_cont("%lu.%02lu BogoMIPS (lpj=%lu)\n", + loops_per_jiffy / (500000 / HZ), + (loops_per_jiffy / (5000 / HZ)) % 100, loops_per_jiffy); +} + + +void __init time_init(void) +{ + of_clk_init(NULL); +} -- 2.1.4 -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/