Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1753011AbbEKJPV (ORCPT ); Mon, 11 May 2015 05:15:21 -0400 Received: from eusmtp01.atmel.com ([212.144.249.242]:34565 "EHLO eusmtp01.atmel.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1752386AbbEKJPQ (ORCPT ); Mon, 11 May 2015 05:15:16 -0400 Message-ID: <555072EC.3040406@atmel.com> Date: Mon, 11 May 2015 11:14:20 +0200 From: Nicolas Ferre Organization: atmel User-Agent: Mozilla/5.0 (X11; Linux x86_64; rv:31.0) Gecko/20100101 Thunderbird/31.6.0 MIME-Version: 1.0 To: =?UTF-8?B?R2HDq2wgUE9SVEFZ?= , Boris Brezillon , Alexandre Belloni , Jean-Christophe PLAGNIOL-VILLARD CC: , Subject: Re: [PATCH v4] ARM: at91/dt: add support for kizbox2 References: <1430755197-12193-1-git-send-email-g.portay@overkiz.com> In-Reply-To: <1430755197-12193-1-git-send-email-g.portay@overkiz.com> Content-Type: text/plain; charset="utf-8" Content-Transfer-Encoding: 8bit X-Originating-IP: [10.161.30.18] Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 6688 Lines: 279 Le 04/05/2015 17:59, Gaël PORTAY a écrit : > Add DT file for Kizbox 2 board. > This board is based on Atmel's SAMA5D31 Cortex-A5 SoC. > > Signed-off-by: Gaël PORTAY > Acked-by: Boris Brezillon > Acked-by: Alexandre Belloni Acked-by: Nicolas Ferre (little fix applied: see below). > --- > Changes since v1: > - drop ek boards from compatible machine > - drop useless pmc node > > Changes since v2: > - update to v4.0 > - fix alphabetical order between gpio_keys and pwm_leds > > Changes since v3: > - update to v4.0.1 > - update "Acked-by" list > > arch/arm/boot/dts/Makefile | 1 + > arch/arm/boot/dts/at91-kizbox2.dts | 217 +++++++++++++++++++++++++++++++++++++ > 2 files changed, 218 insertions(+) > create mode 100644 arch/arm/boot/dts/at91-kizbox2.dts > > diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile > index 21726fd..375f81aa 100644 > --- a/arch/arm/boot/dts/Makefile > +++ b/arch/arm/boot/dts/Makefile > @@ -36,6 +36,7 @@ dtb-$(CONFIG_SOC_SAM_V4_V5) += \ > at91sam9x25ek.dtb \ > at91sam9x35ek.dtb > dtb-$(CONFIG_SOC_SAM_V7) += \ > + at91-kizbox2.dtb \ > at91-sama5d3_xplained.dtb \ > sama5d31ek.dtb \ > sama5d33ek.dtb \ > diff --git a/arch/arm/boot/dts/at91-kizbox2.dts b/arch/arm/boot/dts/at91-kizbox2.dts > new file mode 100644 > index 0000000..a0f2003 > --- /dev/null > +++ b/arch/arm/boot/dts/at91-kizbox2.dts > @@ -0,0 +1,217 @@ > +/* > + * at91-kizbox2.dts - Device Tree file for Overkiz Kizbox 2 board > + * > + * Copyright (C) 2014 Gaël PORTAY > + * > + * Licensed under GPLv2 or later. > + */ > +/dts-v1/; > +#include "sama5d31.dtsi" > +#include "sama5d3_emac.dtsi" Not needed: it is already included in sama5d31.dtsi: I remove it before applying the patch. > +#include > + > +/ { > + model = "Overkiz Kizbox 2"; > + compatible = "overkiz,kizbox2", "atmel,sama5d31", "atmel,sama5d3", "atmel,sama5"; > + > + chosen { > + bootargs = "ubi.mtd=ubi"; > + linux,stdout-path = &dbgu; > + }; > + > + memory { > + reg = <0x20000000 0x10000000>; > + }; > + > + clocks { > + slow_xtal { > + clock-frequency = <32768>; > + }; > + > + main_xtal { > + clock-frequency = <12000000>; > + }; > + }; > + > + ahb { > + apb { > + i2c1: i2c@f0018000 { > + status = "okay"; > + > + pmic: act8865@5b { > + compatible = "active-semi,act8865"; > + reg = <0x5b>; > + status = "okay"; > + > + regulators { > + vcc_1v8_reg: DCDC_REG1 { > + regulator-name = "VCC_1V8"; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1800000>; > + regulator-always-on; > + }; > + > + vcc_1v2_reg: DCDC_REG2 { > + regulator-name = "VCC_1V2"; > + regulator-min-microvolt = <1200000>; > + regulator-max-microvolt = <1200000>; > + regulator-always-on; > + }; > + > + vcc_3v3_reg: DCDC_REG3 { > + regulator-name = "VCC_3V3"; > + regulator-min-microvolt = <3300000>; > + regulator-max-microvolt = <3300000>; > + regulator-always-on; > + }; > + > + vddfuse_reg: LDO_REG1 { > + regulator-name = "FUSE_2V5"; > + regulator-min-microvolt = <2500000>; > + regulator-max-microvolt = <2500000>; > + }; > + > + vddana_reg: LDO_REG2 { > + regulator-name = "VDDANA"; > + regulator-min-microvolt = <3300000>; > + regulator-max-microvolt = <3300000>; > + regulator-always-on; > + }; > + > + vled_reg: LDO_REG3 { > + regulator-name = "VLED"; > + regulator-min-microvolt = <3300000>; > + regulator-max-microvolt = <3300000>; > + regulator-always-on; > + }; > + > + v3v8_rf_reg: LDO_REG4 { > + regulator-name = "V3V8_RF"; > + regulator-min-microvolt = <3800000>; > + regulator-max-microvolt = <3800000>; > + regulator-always-on; > + }; > + }; > + }; > + }; > + > + usart0: serial@f001c000 { > + status = "okay"; > + }; > + > + usart1: serial@f0020000 { > + status = "okay"; > + }; > + > + pwm0: pwm@f002c000 { > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_pwm0_pwmh0_1 > + &pinctrl_pwm0_pwmh1_1 > + &pinctrl_pwm0_pwmh2_0>; > + status = "okay"; > + }; > + > + adc0: adc@f8018000 { > + atmel,adc-vref = <3333>; > + status = "okay"; > + }; > + > + usart2: serial@f8020000 { > + status = "okay"; > + }; > + > + macb1: ethernet@f802c000 { > + phy-mode = "rmii"; > + status = "okay"; > + }; > + > + dbgu: serial@ffffee00 { > + status = "okay"; > + }; > + > + watchdog@fffffe40 { > + status = "okay"; > + }; > + }; > + > + usb1: ohci@00600000 { > + status = "okay"; > + }; > + > + usb2: ehci@00700000 { > + status = "okay"; > + }; > + > + nand0: nand@60000000 { > + nand-bus-width = <8>; > + nand-ecc-mode = "hw"; > + atmel,has-pmecc; > + atmel,pmecc-cap = <4>; > + atmel,pmecc-sector-size = <512>; > + nand-on-flash-bbt; > + status = "okay"; > + > + bootstrap@0 { > + label = "bootstrap"; > + reg = <0x0 0x20000>; > + }; > + > + ubi@20000 { > + label = "ubi"; > + reg = <0x20000 0x7fe0000>; > + }; > + }; > + }; > + > + gpio_keys { > + compatible = "gpio-keys"; > + #address-cells = <1>; > + #size-cells = <0>; > + > + prog { > + label = "PB_PROG"; > + gpios = <&pioE 27 GPIO_ACTIVE_LOW>; > + linux,code = <0x102>; > + gpio-key,wakeup; > + }; > + > + reset { > + label = "PB_RST"; > + gpios = <&pioE 29 GPIO_ACTIVE_LOW>; > + linux,code = <0x100>; > + gpio-key,wakeup; > + }; > + > + user { > + label = "PB_USER"; > + gpios = <&pioE 31 GPIO_ACTIVE_HIGH>; > + linux,code = <0x101>; > + gpio-key,wakeup; > + }; > + }; > + > + pwm_leds { > + compatible = "pwm-leds"; > + > + blue { > + label = "pwm:blue:user"; > + pwms = <&pwm0 2 10000000 0>; > + max-brightness = <255>; > + linux,default-trigger = "default-on"; > + }; > + > + green { > + label = "pwm:green:user"; > + pwms = <&pwm0 1 10000000 0>; > + max-brightness = <255>; > + linux,default-trigger = "default-on"; > + }; > + > + red { > + label = "pwm:red:user"; > + pwms = <&pwm0 0 10000000 0>; > + max-brightness = <255>; > + linux,default-trigger = "default-on"; > + }; > + }; > +}; > -- Nicolas Ferre -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/