Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S932257AbbEKNow (ORCPT ); Mon, 11 May 2015 09:44:52 -0400 Received: from mail-pd0-f178.google.com ([209.85.192.178]:34287 "EHLO mail-pd0-f178.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S932152AbbEKNoc (ORCPT ); Mon, 11 May 2015 09:44:32 -0400 From: Krzysztof Kozlowski To: Kukjin Kim , devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-samsung-soc@vger.kernel.org, linux-kernel@vger.kernel.org Cc: Krzysztof Kozlowski Subject: [PATCH v4 03/13] ARM: dts: exynos4: Use labels for overriding nodes in Exynos4210 Origen Date: Mon, 11 May 2015 22:42:43 +0900 Message-Id: <1431351773-2031-4-git-send-email-k.kozlowski.k@gmail.com> X-Mailer: git-send-email 2.1.4 In-Reply-To: <1431351773-2031-1-git-send-email-k.kozlowski.k@gmail.com> References: <1431351773-2031-1-git-send-email-k.kozlowski.k@gmail.com> Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 10474 Lines: 456 Usage of labels instead of full paths reduces possible mistakes when overriding nodes. Signed-off-by: Krzysztof Kozlowski --- arch/arm/boot/dts/exynos4210-origen.dts | 418 ++++++++++++++++---------------- 1 file changed, 209 insertions(+), 209 deletions(-) diff --git a/arch/arm/boot/dts/exynos4210-origen.dts b/arch/arm/boot/dts/exynos4210-origen.dts index b81146141402..e0abfc3324d1 100644 --- a/arch/arm/boot/dts/exynos4210-origen.dts +++ b/arch/arm/boot/dts/exynos4210-origen.dts @@ -50,209 +50,6 @@ }; }; - watchdog@10060000 { - status = "okay"; - }; - - rtc@10070000 { - status = "okay"; - }; - - tmu@100C0000 { - status = "okay"; - }; - - sdhci@12530000 { - bus-width = <4>; - pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_bus4 &sd2_cd>; - pinctrl-names = "default"; - vmmc-supply = <&mmc_reg>; - status = "okay"; - }; - - sdhci@12510000 { - bus-width = <4>; - pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus4 &sd0_cd>; - pinctrl-names = "default"; - vmmc-supply = <&mmc_reg>; - status = "okay"; - }; - - g2d@12800000 { - status = "okay"; - }; - - codec@13400000 { - samsung,mfc-r = <0x43000000 0x800000>; - samsung,mfc-l = <0x51000000 0x800000>; - status = "okay"; - }; - - serial@13800000 { - status = "okay"; - }; - - serial@13810000 { - status = "okay"; - }; - - serial@13820000 { - status = "okay"; - }; - - serial@13830000 { - status = "okay"; - }; - - i2c@13860000 { - status = "okay"; - samsung,i2c-sda-delay = <100>; - samsung,i2c-max-bus-freq = <20000>; - pinctrl-0 = <&i2c0_bus>; - pinctrl-names = "default"; - - max8997_pmic@66 { - compatible = "maxim,max8997-pmic"; - reg = <0x66>; - interrupt-parent = <&gpx0>; - interrupts = <4 0>, <3 0>; - - max8997,pmic-buck1-dvs-voltage = <1350000>; - max8997,pmic-buck2-dvs-voltage = <1100000>; - max8997,pmic-buck5-dvs-voltage = <1200000>; - - regulators { - ldo1_reg: LDO1 { - regulator-name = "VDD_ABB_3.3V"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - }; - - ldo2_reg: LDO2 { - regulator-name = "VDD_ALIVE_1.1V"; - regulator-min-microvolt = <1100000>; - regulator-max-microvolt = <1100000>; - regulator-always-on; - }; - - ldo3_reg: LDO3 { - regulator-name = "VMIPI_1.1V"; - regulator-min-microvolt = <1100000>; - regulator-max-microvolt = <1100000>; - }; - - ldo4_reg: LDO4 { - regulator-name = "VDD_RTC_1.8V"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - }; - - ldo6_reg: LDO6 { - regulator-name = "VMIPI_1.8V"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - }; - - ldo7_reg: LDO7 { - regulator-name = "VDD_AUD_1.8V"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - ldo8_reg: LDO8 { - regulator-name = "VADC_3.3V"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - }; - - ldo9_reg: LDO9 { - regulator-name = "DVDD_SWB_2.8V"; - regulator-min-microvolt = <2800000>; - regulator-max-microvolt = <2800000>; - regulator-always-on; - }; - - ldo10_reg: LDO10 { - regulator-name = "VDD_PLL_1.1V"; - regulator-min-microvolt = <1100000>; - regulator-max-microvolt = <1100000>; - regulator-always-on; - }; - - ldo11_reg: LDO11 { - regulator-name = "VDD_AUD_3V"; - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3000000>; - }; - - ldo14_reg: LDO14 { - regulator-name = "AVDD18_SWB_1.8V"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - }; - - ldo17_reg: LDO17 { - regulator-name = "VDD_SWB_3.3V"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - }; - - ldo21_reg: LDO21 { - regulator-name = "VDD_MIF_1.2V"; - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - regulator-always-on; - }; - - buck1_reg: BUCK1 { - /* - * HACK: The real name is VDD_ARM_1.2V, - * but exynos-cpufreq does not support - * DT-based regulator lookup yet. - */ - regulator-name = "vdd_arm"; - regulator-min-microvolt = <950000>; - regulator-max-microvolt = <1350000>; - regulator-always-on; - regulator-boot-on; - }; - - buck2_reg: BUCK2 { - regulator-name = "VDD_INT_1.1V"; - regulator-min-microvolt = <900000>; - regulator-max-microvolt = <1100000>; - regulator-always-on; - regulator-boot-on; - }; - - buck3_reg: BUCK3 { - regulator-name = "VDD_G3D_1.1V"; - regulator-min-microvolt = <900000>; - regulator-max-microvolt = <1100000>; - }; - - buck5_reg: BUCK5 { - regulator-name = "VDDQ_M1M2_1.2V"; - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - regulator-always-on; - }; - - buck7_reg: BUCK7 { - regulator-name = "VDD_LCD_3.3V"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-boot-on; - regulator-always-on; - }; - }; - }; - }; - gpio_keys { compatible = "gpio-keys"; #address-cells = <1>; @@ -314,12 +111,6 @@ }; }; - fimd@11c00000 { - pinctrl-0 = <&lcd_en &lcd_clk &lcd_data24 &pwm0_out>; - pinctrl-names = "default"; - status = "okay"; - }; - display-timings { native-mode = <&timing0>; timing0: timing { @@ -335,3 +126,212 @@ }; }; }; + +&fimd { + pinctrl-0 = <&lcd_en &lcd_clk &lcd_data24 &pwm0_out>; + pinctrl-names = "default"; + status = "okay"; +}; + +&g2d { + status = "okay"; +}; + +&i2c_0 { + status = "okay"; + samsung,i2c-sda-delay = <100>; + samsung,i2c-max-bus-freq = <20000>; + pinctrl-0 = <&i2c0_bus>; + pinctrl-names = "default"; + + max8997_pmic@66 { + compatible = "maxim,max8997-pmic"; + reg = <0x66>; + interrupt-parent = <&gpx0>; + interrupts = <4 0>, <3 0>; + + max8997,pmic-buck1-dvs-voltage = <1350000>; + max8997,pmic-buck2-dvs-voltage = <1100000>; + max8997,pmic-buck5-dvs-voltage = <1200000>; + + regulators { + ldo1_reg: LDO1 { + regulator-name = "VDD_ABB_3.3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + ldo2_reg: LDO2 { + regulator-name = "VDD_ALIVE_1.1V"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + regulator-always-on; + }; + + ldo3_reg: LDO3 { + regulator-name = "VMIPI_1.1V"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + }; + + ldo4_reg: LDO4 { + regulator-name = "VDD_RTC_1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + ldo6_reg: LDO6 { + regulator-name = "VMIPI_1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + ldo7_reg: LDO7 { + regulator-name = "VDD_AUD_1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + ldo8_reg: LDO8 { + regulator-name = "VADC_3.3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + ldo9_reg: LDO9 { + regulator-name = "DVDD_SWB_2.8V"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-always-on; + }; + + ldo10_reg: LDO10 { + regulator-name = "VDD_PLL_1.1V"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + regulator-always-on; + }; + + ldo11_reg: LDO11 { + regulator-name = "VDD_AUD_3V"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + }; + + ldo14_reg: LDO14 { + regulator-name = "AVDD18_SWB_1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + ldo17_reg: LDO17 { + regulator-name = "VDD_SWB_3.3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + ldo21_reg: LDO21 { + regulator-name = "VDD_MIF_1.2V"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + }; + + buck1_reg: BUCK1 { + /* + * HACK: The real name is VDD_ARM_1.2V, + * but exynos-cpufreq does not support + * DT-based regulator lookup yet. + */ + regulator-name = "vdd_arm"; + regulator-min-microvolt = <950000>; + regulator-max-microvolt = <1350000>; + regulator-always-on; + regulator-boot-on; + }; + + buck2_reg: BUCK2 { + regulator-name = "VDD_INT_1.1V"; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <1100000>; + regulator-always-on; + regulator-boot-on; + }; + + buck3_reg: BUCK3 { + regulator-name = "VDD_G3D_1.1V"; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <1100000>; + }; + + buck5_reg: BUCK5 { + regulator-name = "VDDQ_M1M2_1.2V"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + }; + + buck7_reg: BUCK7 { + regulator-name = "VDD_LCD_3.3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + }; + }; +}; + +&mfc { + samsung,mfc-r = <0x43000000 0x800000>; + samsung,mfc-l = <0x51000000 0x800000>; + status = "okay"; +}; + +&sdhci_0 { + bus-width = <4>; + pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus4 &sd0_cd>; + pinctrl-names = "default"; + vmmc-supply = <&mmc_reg>; + status = "okay"; +}; + +&sdhci_2 { + bus-width = <4>; + pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_bus4 &sd2_cd>; + pinctrl-names = "default"; + vmmc-supply = <&mmc_reg>; + status = "okay"; +}; + +&serial_0 { + status = "okay"; +}; + +&serial_1 { + status = "okay"; +}; + +&serial_2 { + status = "okay"; +}; + +&serial_3 { + status = "okay"; +}; + +&rtc { + status = "okay"; +}; + +&tmu { + status = "okay"; +}; + +&watchdog { + status = "okay"; +}; -- 2.1.4 -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/