Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1753569AbbEKOiF (ORCPT ); Mon, 11 May 2015 10:38:05 -0400 Received: from comal.ext.ti.com ([198.47.26.152]:58363 "EHLO comal.ext.ti.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1751116AbbEKOiA (ORCPT ); Mon, 11 May 2015 10:38:00 -0400 Message-ID: <5550BE99.40702@ti.com> Date: Mon, 11 May 2015 20:07:13 +0530 From: Kishon Vijay Abraham I User-Agent: Mozilla/5.0 (X11; Linux x86_64; rv:31.0) Gecko/20100101 Thunderbird/31.0 MIME-Version: 1.0 To: Arun Ramamurthy , Rob Herring , Pawel Moll , Mark Rutland , Ian Campbell , Kumar Gala , Russell King , Gregory CLEMENT , Gabriel FERNANDEZ , Jason Cooper , Thomas Petazzoni , Greg Kroah-Hartman , Arnd Bergmann CC: , , , Dmitry Torokhov , Anatol Pomazau , Jonathan Richardson , Scott Branden , Ray Jui , , Dmitry Torokhov Subject: Re: [PATCH v3 3/3] phy: cygnus-usbphy: Add Broadcom Cygnus USB phy driver References: <1429744479-10410-1-git-send-email-arun.ramamurthy@broadcom.com> <1429744479-10410-4-git-send-email-arun.ramamurthy@broadcom.com> In-Reply-To: <1429744479-10410-4-git-send-email-arun.ramamurthy@broadcom.com> Content-Type: text/plain; charset="windows-1252"; format=flowed Content-Transfer-Encoding: 7bit Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 18262 Lines: 564 Hi, On Thursday 23 April 2015 04:44 AM, Arun Ramamurthy wrote: > This driver adds support for USB 2.0 host and device phy for > Broadcom's Cygnus chipset. The host controller is connected to > three separate phys and one of the phys (port 2) is connected to > the device controller > > Signed-off-by: Arun Ramamurthy > Signed-off-by: Dmitry Torokhov > Reviewed-by: Ray Jui > Reviewed-by: Scott Branden > --- > drivers/phy/Kconfig | 12 + > drivers/phy/Makefile | 1 + > drivers/phy/phy-bcm-cygnus-usb.c | 504 +++++++++++++++++++++++++++++++++++++++ > 3 files changed, 517 insertions(+) > create mode 100644 drivers/phy/phy-bcm-cygnus-usb.c > > diff --git a/drivers/phy/Kconfig b/drivers/phy/Kconfig > index 2962de2..0aa62dc 100644 > --- a/drivers/phy/Kconfig > +++ b/drivers/phy/Kconfig > @@ -291,4 +291,16 @@ config PHY_QCOM_UFS > help > Support for UFS PHY on QCOM chipsets. > > +config PHY_BCM_CYGNUS_USB > + tristate "Broadcom Cygnus USB PHY support" > + depends on OF > + depends on ARCH_BCM_CYGNUS || COMPILE_TEST > + select GENERIC_PHY > + default ARCH_BCM_CYGNUS > + help > + Enable this to support the USB PHY in Broadcom's Cygnus chip. > + The phys are capable of supporting host mode for all ports > + and device mode for port 2. The host or device configuration is > + read from the device tree. > + > endmenu > diff --git a/drivers/phy/Makefile b/drivers/phy/Makefile > index f080e1b..47a37fa 100644 > --- a/drivers/phy/Makefile > +++ b/drivers/phy/Makefile > @@ -6,6 +6,7 @@ obj-$(CONFIG_GENERIC_PHY) += phy-core.o > obj-$(CONFIG_PHY_BERLIN_USB) += phy-berlin-usb.o > obj-$(CONFIG_PHY_BERLIN_SATA) += phy-berlin-sata.o > obj-$(CONFIG_ARMADA375_USBCLUSTER_PHY) += phy-armada375-usb2.o > +obj-$(CONFIG_PHY_BCM_CYGNUS_USB) += phy-bcm-cygnus-usb.o > obj-$(CONFIG_BCM_KONA_USB2_PHY) += phy-bcm-kona-usb2.o > obj-$(CONFIG_PHY_EXYNOS_DP_VIDEO) += phy-exynos-dp-video.o > obj-$(CONFIG_PHY_EXYNOS_MIPI_VIDEO) += phy-exynos-mipi-video.o > diff --git a/drivers/phy/phy-bcm-cygnus-usb.c b/drivers/phy/phy-bcm-cygnus-usb.c > new file mode 100644 > index 0000000..e718404 > --- /dev/null > +++ b/drivers/phy/phy-bcm-cygnus-usb.c > @@ -0,0 +1,504 @@ > +/* > + * Copyright (C) 2015 Broadcom Corporation > + * > + * This program is free software; you can redistribute it and/or > + * modify it under the terms of the GNU General Public License as > + * published by the Free Software Foundation version 2. > + * > + * This program is distributed "as is" WITHOUT ANY WARRANTY of any > + * kind, whether express or implied; without even the implied warranty > + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the > + * GNU General Public License for more details. > + */ > + > +#include > +#include > +#include > +#include > +#include > +#include > +#include > + > +#define CDRU_USBPHY_CLK_RST_SEL_OFFSET 0x11b4 > +#define CDRU_USBPHY2_HOST_DEV_SEL_OFFSET 0x11b8 > +#define CDRU_SPARE_REG_0_OFFSET 0x1238 > +#define CRMU_USB_PHY_AON_CTRL_OFFSET 0x00028 > +#define CDRU_USB_DEV_SUSPEND_RESUME_CTRL_OFFSET 0x1210 > +#define CDRU_USBPHY_P0_STATUS_OFFSET 0x11D0 > +#define CDRU_USBPHY_P1_STATUS_OFFSET 0x11E8 > +#define CDRU_USBPHY_P2_STATUS_OFFSET 0x1200 > +#define CDRU_USBPHY_USBPHY_ILDO_ON_FLAG 1 > +#define CDRU_USBPHY_USBPHY_PLL_LOCK 0 > +#define CDRU_USB_DEV_SUSPEND_RESUME_CTRL_DISABLE 0 > +#define PHY2_DEV_HOST_CTRL_SEL_HOST 1 > + > +#define CRMU_USBPHY_P0_AFE_CORERDY_VDDC 1 > +#define CRMU_USBPHY_P0_RESETB 2 > +#define CRMU_USBPHY_P1_AFE_CORERDY_VDDC 9 > +#define CRMU_USBPHY_P1_RESETB 10 > +#define CRMU_USBPHY_P2_AFE_CORERDY_VDDC 17 > +#define CRMU_USBPHY_P2_RESETB 18 > + > +#define USB2_IDM_IDM_IO_CONTROL_DIRECT_OFFSET 0x0408 > +#define USB2_IDM_IDM_IO_CONTROL_DIRECT__clk_enable 0 > +#define USB2_IDM_IDM_RESET_CONTROL_OFFSET 0x0800 > +#define USB2_IDM_IDM_RESET_CONTROL__RESET 0 > + > +#define PLL_LOCK_RETRY_COUNT 1000 > +#define MAX_PHY_PORTS 3 > + > +static int power_bit[] = {CRMU_USBPHY_P0_AFE_CORERDY_VDDC, > + CRMU_USBPHY_P1_AFE_CORERDY_VDDC, > + CRMU_USBPHY_P2_AFE_CORERDY_VDDC}; > +static int reset_bit[] = {CRMU_USBPHY_P0_RESETB, > + CRMU_USBPHY_P1_RESETB, > + CRMU_USBPHY_P2_RESETB}; > +static int status_reg[] = {CDRU_USBPHY_P0_STATUS_OFFSET, > + CDRU_USBPHY_P1_STATUS_OFFSET, > + CDRU_USBPHY_P2_STATUS_OFFSET}; > + > +struct bcm_phy_instance; > + > +struct bcm_phy_driver { > + void __iomem *usbphy_regs; > + void __iomem *usb2h_idm_regs; > + void __iomem *usb2d_idm_regs; > + struct bcm_phy_instance *ports[MAX_PHY_PORTS]; > + spinlock_t lock; > + bool idm_host_enabled; > +}; > + > +struct bcm_phy_instance { > + struct bcm_phy_driver *driver; > + struct phy *generic_phy; > + int port_no; > + bool host_mode; /* true - Host, false - device */ > + bool power; > +}; > + > +static inline int bcm_phy_cdru_usbphy_status_wait(u32 usb_reg, int reg_bit, > + struct bcm_phy_driver *phy_driver) > +{ > + /* Wait for the PLL lock status */ > + int retry = PLL_LOCK_RETRY_COUNT; > + u32 reg_val; > + > + do { > + udelay(1); > + reg_val = readl(phy_driver->usbphy_regs + > + usb_reg); > + if (reg_val & (1 << reg_bit)) > + return 0; > + } while (--retry > 0); > + > + return -EBUSY; > + > +} > + > +static struct phy *bcm_usb_phy_xlate(struct device *dev, > + struct of_phandle_args *args) > +{ > + struct bcm_phy_driver *phy_driver = dev_get_drvdata(dev); > + struct bcm_phy_instance *port = NULL; > + int i; > + > + if (!phy_driver) > + return ERR_PTR(-ENODEV); > + > + if (WARN_ON(args->args_count != 1)) > + return ERR_PTR(-ENODEV); > + > + if (WARN_ON(args->args[0] < 0 || args->args[0] > 1)) > + return ERR_PTR(-ENODEV); > + > + for (i = 0; i < ARRAY_SIZE(phy_driver->ports); i++) { > + struct bcm_phy_instance *p = phy_driver->ports[i]; > + > + if (p && p->generic_phy->dev.of_node == args->np) { > + port = p; > + break; > + } > + } > + > + if (!port) { > + dev_err(dev, "Failed to locate phy %s\n", args->np->name); > + return ERR_PTR(-EINVAL); > + } > + > + port->host_mode = args->args[0]; > + > + return port->generic_phy; > +} > + > +static int bcm_phy_init(struct phy *generic_phy) > +{ > + struct bcm_phy_instance *port = phy_get_drvdata(generic_phy); > + struct bcm_phy_driver *phy_driver = port->driver; > + unsigned long flags; > + u32 reg_val; > + > + spin_lock_irqsave(&phy_driver->lock, flags); > + > + /* > + * Only PORT 2 is capable of being device and host > + * Default setting is device, check if it is set to host. > + */ > + if (port->port_no != 2) { can be a goto here with a label in the end. > + spin_unlock_irqrestore(&phy_driver->lock, flags); > + return 0; > + } > + > + if (port->host_mode) { > + writel(PHY2_DEV_HOST_CTRL_SEL_HOST, > + phy_driver->usbphy_regs + > + CDRU_USBPHY2_HOST_DEV_SEL_OFFSET); > + } else { > + /* > + * Disable suspend/resume signals to device controller > + * when a port is in device mode. > + */ > + reg_val = readl(phy_driver->usbphy_regs + > + CDRU_USB_DEV_SUSPEND_RESUME_CTRL_OFFSET); > + reg_val |= > + 1 << CDRU_USB_DEV_SUSPEND_RESUME_CTRL_DISABLE; > + writel(reg_val, phy_driver->usbphy_regs + > + CDRU_USB_DEV_SUSPEND_RESUME_CTRL_OFFSET); > + } > + > + ^^spurious blank line. > + spin_unlock_irqrestore(&phy_driver->lock, flags); > + return 0; > +} > + > +static int bcm_phy_shutdown(struct phy *generic_phy) > +{ > + struct bcm_phy_instance *port = phy_get_drvdata(generic_phy); > + struct bcm_phy_driver *phy_driver = port->driver; > + unsigned long flags; > + int i; > + u32 reg_val, powered_on_phy; > + bool power_off_flag = true; > + > + spin_lock_irqsave(&phy_driver->lock, flags); > + > + /* power down the phy */ > + reg_val = readl(phy_driver->usbphy_regs + > + CRMU_USB_PHY_AON_CTRL_OFFSET); > + reg_val &= ~(1 << power_bit[port->port_no]); > + reg_val &= ~(1 << reset_bit[port->port_no]); > + writel(reg_val, phy_driver->usbphy_regs + > + CRMU_USB_PHY_AON_CTRL_OFFSET); > + port->power = false; > + > + /* > + * If a port is configured to device and it is being shutdown, > + * turn off the clocks to the usb device controller. > + */ > + if (port->port_no == 2 && !port->host_mode) { > + reg_val = readl(phy_driver->usb2d_idm_regs + > + USB2_IDM_IDM_IO_CONTROL_DIRECT_OFFSET); > + reg_val &= ~(1 << USB2_IDM_IDM_IO_CONTROL_DIRECT__clk_enable); please avoid using camel case.. > + writel(reg_val, phy_driver->usb2d_idm_regs + > + USB2_IDM_IDM_IO_CONTROL_DIRECT_OFFSET); > + > + reg_val = readl(phy_driver->usb2d_idm_regs + > + USB2_IDM_IDM_RESET_CONTROL_OFFSET); > + reg_val |= 1 << USB2_IDM_IDM_RESET_CONTROL__RESET; > + writel(reg_val, phy_driver->usb2d_idm_regs + > + USB2_IDM_IDM_RESET_CONTROL_OFFSET); > + > + spin_unlock_irqrestore(&phy_driver->lock, flags); > + return 0; > + } > + > + /* > + * If the phy being shutdown provides clock and reset to > + * the host controller, change it do a different powered on phy > + * If all phys are powered off, shut of the host controller > + */ > + reg_val = readl(phy_driver->usbphy_regs + > + CDRU_USBPHY_CLK_RST_SEL_OFFSET); > + powered_on_phy = reg_val; The above statement is useless. > + if (reg_val == port->port_no) { > + for (i = 0; i < ARRAY_SIZE(phy_driver->ports); i++) { > + if (phy_driver->ports[i] && > + phy_driver->ports[i]->power && > + phy_driver->ports[i]->host_mode) { > + power_off_flag = false; > + powered_on_phy = i; > + break; > + } > + } > + } > + > + if (power_off_flag) { > + /* > + * Put the host controller into reset state and > + * disable clock. > + */ > + reg_val = readl(phy_driver->usb2h_idm_regs + > + USB2_IDM_IDM_IO_CONTROL_DIRECT_OFFSET); > + reg_val &= > + ~(1 << USB2_IDM_IDM_IO_CONTROL_DIRECT__clk_enable); > + writel(reg_val, phy_driver->usb2h_idm_regs + > + USB2_IDM_IDM_IO_CONTROL_DIRECT_OFFSET); > + > + reg_val = readl(phy_driver->usb2h_idm_regs + > + USB2_IDM_IDM_RESET_CONTROL_OFFSET); > + reg_val |= (1 << USB2_IDM_IDM_RESET_CONTROL__RESET); > + writel(reg_val, phy_driver->usb2h_idm_regs + > + USB2_IDM_IDM_RESET_CONTROL_OFFSET); > + phy_driver->idm_host_enabled = 0; > + } else { > + writel(powered_on_phy, phy_driver->usbphy_regs + > + CDRU_USBPHY_CLK_RST_SEL_OFFSET); > + } > + > + spin_unlock_irqrestore(&phy_driver->lock, flags); > + > + return 0; > +} > + > +static int bcm_phy_poweron(struct phy *generic_phy) > +{ > + struct bcm_phy_instance *port = phy_get_drvdata(generic_phy); > + struct bcm_phy_driver *phy_driver = port->driver; > + unsigned long flags; > + int ret; > + u32 reg_val; > + bool clock_reset_flag = true; > + > + spin_lock_irqsave(&phy_driver->lock, flags); > + > + /* Bring the AFE block out of reset to start powering up the PHY */ > + reg_val = readl(phy_driver->usbphy_regs + CRMU_USB_PHY_AON_CTRL_OFFSET); > + reg_val |= 1 << power_bit[port->port_no]; > + writel(reg_val, phy_driver->usbphy_regs + CRMU_USB_PHY_AON_CTRL_OFFSET); > + > + /* Check for power on and PLL lock */ > + ret = bcm_phy_cdru_usbphy_status_wait(status_reg[port->port_no], > + CDRU_USBPHY_USBPHY_ILDO_ON_FLAG, phy_driver); > + if (ret < 0) { > + dev_err(&generic_phy->dev, > + "Timed out waiting for USBPHY_ILDO_ON_FLAG on port %d", > + port->port_no); > + goto err_shutdown; > + } > + ret = bcm_phy_cdru_usbphy_status_wait(status_reg[port->port_no], > + CDRU_USBPHY_USBPHY_PLL_LOCK, phy_driver); > + if (ret < 0) { > + dev_err(&generic_phy->dev, > + "Timed out waiting for USBPHY_PLL_LOCK on port %d", > + port->port_no); > + goto err_shutdown; > + } > + port->power = true; > + > + /* Check if the port 2 is configured for device */ > + if (port->port_no == 2 && !port->host_mode) { > + /* > + * Enable clock to USB device and get the USB device > + * out of reset. > + */ > + reg_val = readl(phy_driver->usb2d_idm_regs + > + USB2_IDM_IDM_IO_CONTROL_DIRECT_OFFSET); > + reg_val |= 1 << USB2_IDM_IDM_IO_CONTROL_DIRECT__clk_enable; > + writel(reg_val, phy_driver->usb2d_idm_regs + > + USB2_IDM_IDM_IO_CONTROL_DIRECT_OFFSET); > + > + reg_val = readl(phy_driver->usb2d_idm_regs + > + USB2_IDM_IDM_RESET_CONTROL_OFFSET); > + reg_val &= ~(1 << USB2_IDM_IDM_RESET_CONTROL__RESET); > + writel(reg_val, phy_driver->usb2d_idm_regs + > + USB2_IDM_IDM_RESET_CONTROL_OFFSET); > + > + } else { > + reg_val = readl(phy_driver->usbphy_regs + > + CDRU_USBPHY_CLK_RST_SEL_OFFSET); > + > + /* > + * Check if the phy that is configured to provide clock > + * and reset is powered on. > + */ > + if (reg_val >= 0 && reg_val < ARRAY_SIZE(phy_driver->ports)) > + if (phy_driver->ports[reg_val]) > + if (phy_driver->ports[reg_val]->power) > + clock_reset_flag = false; > + > + /* if not set the current phy */ > + if (clock_reset_flag) { > + reg_val = port->port_no; > + writel(reg_val, phy_driver->usbphy_regs + > + CDRU_USBPHY_CLK_RST_SEL_OFFSET); > + } > + } > + > + if (!phy_driver->idm_host_enabled) { > + /* Enable clock to USB and get the USB out of reset */ > + reg_val = readl(phy_driver->usb2h_idm_regs + > + USB2_IDM_IDM_IO_CONTROL_DIRECT_OFFSET); > + reg_val |= 1 << USB2_IDM_IDM_IO_CONTROL_DIRECT__clk_enable; > + writel(reg_val, phy_driver->usb2h_idm_regs + > + USB2_IDM_IDM_IO_CONTROL_DIRECT_OFFSET); > + > + reg_val = readl(phy_driver->usb2h_idm_regs + > + USB2_IDM_IDM_RESET_CONTROL_OFFSET); > + reg_val &= ~(1 << USB2_IDM_IDM_RESET_CONTROL__RESET); > + writel(reg_val, phy_driver->usb2h_idm_regs + > + USB2_IDM_IDM_RESET_CONTROL_OFFSET); > + phy_driver->idm_host_enabled = true; > + } > + > + spin_unlock_irqrestore(&phy_driver->lock, flags); > + return 0; > + > +err_shutdown: > + spin_unlock_irqrestore(&phy_driver->lock, flags); > + bcm_phy_shutdown(generic_phy); Instead of calling the phy_shutdown, you can just power off the PHY. > + return ret; > +} > + > +static struct phy_ops ops = { > + .init = bcm_phy_init, > + .power_on = bcm_phy_poweron, > + .power_off = bcm_phy_shutdown, > +}; > + > +static const struct of_device_id bcm_phy_dt_ids[] = { > + { .compatible = "brcm,cygnus-usb-phy", }, > + { } > +}; > + > +static int bcm_phy_probe(struct platform_device *pdev) > +{ > + struct device *dev = &pdev->dev; > + struct bcm_phy_driver *phy_driver; > + struct phy_provider *phy_provider; > + struct device_node *child; > + struct resource *res; > + int error; > + u32 reg_val; > + > + phy_driver = devm_kzalloc(dev, sizeof(struct bcm_phy_driver), > + GFP_KERNEL); > + if (!phy_driver) > + return -ENOMEM; > + > + spin_lock_init(&phy_driver->lock); > + > + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); > + if (!res) { > + dev_err(&pdev->dev, "missing memory resource usbphy_regs\n"); > + return -EINVAL; > + } > + phy_driver->usbphy_regs = devm_ioremap_nocache(dev, res->start, > + resource_size(res)); > + if (!phy_driver->usbphy_regs) { > + dev_err(dev, "Failed to remap usbphy_regs\n"); > + return -ENOMEM; > + } > + > + res = platform_get_resource(pdev, IORESOURCE_MEM, 1); > + if (!res) { > + dev_err(&pdev->dev, "missing memory resource ubs2h_idm_regs\n"); > + return -EINVAL; > + } > + phy_driver->usb2h_idm_regs = devm_ioremap_nocache(dev, res->start, > + resource_size(res)); > + if (!phy_driver->usb2h_idm_regs) { > + dev_err(dev, "Failed to remap usb2h_idm_regs\n"); > + return -ENOMEM; > + } > + > + res = platform_get_resource(pdev, IORESOURCE_MEM, 2); > + if (!res) { > + dev_err(&pdev->dev, "missing memory resource ubs2d_idm_regs\n"); > + return -EINVAL; > + } > + phy_driver->usb2d_idm_regs = devm_ioremap_nocache(dev, res->start, > + resource_size(res)); > + if (!phy_driver->usb2d_idm_regs) { > + dev_err(dev, "Failed to remap usb2d_idm_regs\n"); > + return -ENOMEM; > + } > + > + dev_set_drvdata(dev, phy_driver); > + > + phy_driver->idm_host_enabled = false; > + > + /* Shut down all ports. They can be powered up as required */ > + reg_val = readl(phy_driver->usbphy_regs + > + CRMU_USB_PHY_AON_CTRL_OFFSET); > + reg_val &= ~(1 << CRMU_USBPHY_P0_AFE_CORERDY_VDDC); > + reg_val &= ~(1 << CRMU_USBPHY_P0_RESETB); > + reg_val &= ~(1 << CRMU_USBPHY_P1_AFE_CORERDY_VDDC); > + reg_val &= ~(1 << CRMU_USBPHY_P1_RESETB); > + reg_val &= ~(1 << CRMU_USBPHY_P2_AFE_CORERDY_VDDC); > + reg_val &= ~(1 << CRMU_USBPHY_P2_RESETB); > + writel(reg_val, phy_driver->usbphy_regs + > + CRMU_USB_PHY_AON_CTRL_OFFSET); > + > + for_each_available_child_of_node(dev->of_node, child) { > + struct bcm_phy_instance *port; > + u32 port_no; > + > + if (of_property_read_u32(child, "reg", &port_no)) { > + dev_err(dev, "missing reg property in node %s\n", > + child->name); > + return -EINVAL; > + } > + > + if (port_no >= ARRAY_SIZE(phy_driver->ports)) { > + dev_err(dev, "invalid reg in node %s: %u\n", > + child->name, port_no); > + return -EINVAL; > + } > + > + port = devm_kzalloc(dev, sizeof(*port), GFP_KERNEL); > + if (!port) > + return -ENOMEM; > + > + port->generic_phy = devm_phy_create(dev, child, &ops); > + if (IS_ERR(port->generic_phy)) { > + error = PTR_ERR(port->generic_phy); > + dev_err(dev, "Failed to create phy %u: %d", > + port_no, error); > + return error; > + } > + > + port->port_no = port_no; > + port->driver = phy_driver; > + phy_set_drvdata(port->generic_phy, port); > + > + phy_driver->ports[port_no] = port; > + } > + > + phy_provider = devm_of_phy_provider_register(dev, bcm_usb_phy_xlate); > + if (IS_ERR(phy_provider)) { > + error = PTR_ERR(phy_provider); > + dev_err(dev, "Failed to register as phy provider: %d\n", > + error); > + return error; > + } > + > + dev_set_drvdata(pdev, phy_driver); dev_set_drvdata is being done multiple times. Please also run checkpatch and fix all the errors and warnings before posting the next version. Thanks Kishon -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/