Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S965303AbbEMR1V (ORCPT ); Wed, 13 May 2015 13:27:21 -0400 Received: from fw-tnat.cambridge.arm.com ([217.140.96.140]:41189 "EHLO cam-smtp0.cambridge.arm.com" rhost-flags-OK-OK-OK-FAIL) by vger.kernel.org with ESMTP id S965249AbbEMR1R (ORCPT ); Wed, 13 May 2015 13:27:17 -0400 X-Greylist: delayed 888 seconds by postgrey-1.27 at vger.kernel.org; Wed, 13 May 2015 13:26:58 EDT From: Liviu Dudau To: Arnd Bergmann , Olof Johansson , Rob Herring , Mark Rutland , Ian Campbell , Marc Zyngier , Catalin Marinas , Will Deacon , Sudeep Holla , devicetree , LAKML , LKML Subject: [PATCH 2/5] arm64: Juno: Split juno.dts into juno-base.dtsi and juno.dts. Date: Wed, 13 May 2015 18:11:29 +0100 Message-Id: <1431537092-19597-3-git-send-email-Liviu.Dudau@arm.com> X-Mailer: git-send-email 2.3.6 In-Reply-To: <1431537092-19597-1-git-send-email-Liviu.Dudau@arm.com> References: <1431537092-19597-1-git-send-email-Liviu.Dudau@arm.com> Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 8807 Lines: 286 Prepare the device tree for adding more boards based on Juno r0. Signed-off-by: Liviu Dudau --- arch/arm64/boot/dts/arm/juno-base.dtsi | 125 +++++++++++++++++++++++++++++++++ arch/arm64/boot/dts/arm/juno.dts | 122 +------------------------------- 2 files changed, 126 insertions(+), 121 deletions(-) create mode 100644 arch/arm64/boot/dts/arm/juno-base.dtsi diff --git a/arch/arm64/boot/dts/arm/juno-base.dtsi b/arch/arm64/boot/dts/arm/juno-base.dtsi new file mode 100644 index 0000000..2faa68a --- /dev/null +++ b/arch/arm64/boot/dts/arm/juno-base.dtsi @@ -0,0 +1,125 @@ + /* + * Devices shared by all Juno boards + */ + + gic: interrupt-controller@2c010000 { + compatible = "arm,gic-400", "arm,cortex-a15-gic"; + reg = <0x0 0x2c010000 0 0x1000>, + <0x0 0x2c02f000 0 0x2000>, + <0x0 0x2c04f000 0 0x2000>, + <0x0 0x2c06f000 0 0x2000>; + #address-cells = <0>; + #interrupt-cells = <3>; + interrupt-controller; + interrupts = ; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupts = , + , + , + ; + }; + + /include/ "juno-clocks.dtsi" + + dma@7ff00000 { + compatible = "arm,pl330", "arm,primecell"; + reg = <0x0 0x7ff00000 0 0x1000>; + #dma-cells = <1>; + #dma-channels = <8>; + #dma-requests = <32>; + interrupts = , + , + , + , + , + , + , + ; + clocks = <&soc_faxiclk>; + clock-names = "apb_pclk"; + }; + + soc_uart0: uart@7ff80000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0x0 0x7ff80000 0x0 0x1000>; + interrupts = ; + clocks = <&soc_uartclk>, <&soc_refclk100mhz>; + clock-names = "uartclk", "apb_pclk"; + }; + + i2c@7ffa0000 { + compatible = "snps,designware-i2c"; + reg = <0x0 0x7ffa0000 0x0 0x1000>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = ; + clock-frequency = <400000>; + i2c-sda-hold-time-ns = <500>; + clocks = <&soc_smc50mhz>; + + dvi0: dvi-transmitter@70 { + compatible = "nxp,tda998x"; + reg = <0x70>; + }; + + dvi1: dvi-transmitter@71 { + compatible = "nxp,tda998x"; + reg = <0x71>; + }; + }; + + ohci@7ffb0000 { + compatible = "generic-ohci"; + reg = <0x0 0x7ffb0000 0x0 0x10000>; + interrupts = ; + clocks = <&soc_usb48mhz>; + }; + + ehci@7ffc0000 { + compatible = "generic-ehci"; + reg = <0x0 0x7ffc0000 0x0 0x10000>; + interrupts = ; + clocks = <&soc_usb48mhz>; + }; + + memory-controller@7ffd0000 { + compatible = "arm,pl354", "arm,primecell"; + reg = <0 0x7ffd0000 0 0x1000>; + interrupts = , + ; + clocks = <&soc_smc50mhz>; + clock-names = "apb_pclk"; + }; + + smb { + compatible = "simple-bus"; + #address-cells = <2>; + #size-cells = <1>; + ranges = <0 0 0 0x08000000 0x04000000>, + <1 0 0 0x14000000 0x04000000>, + <2 0 0 0x18000000 0x04000000>, + <3 0 0 0x1c000000 0x04000000>, + <4 0 0 0x0c000000 0x04000000>, + <5 0 0 0x10000000 0x04000000>; + + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 15>; + interrupt-map = <0 0 0 &gic 0 68 IRQ_TYPE_LEVEL_HIGH>, + <0 0 1 &gic 0 69 IRQ_TYPE_LEVEL_HIGH>, + <0 0 2 &gic 0 70 IRQ_TYPE_LEVEL_HIGH>, + <0 0 3 &gic 0 160 IRQ_TYPE_LEVEL_HIGH>, + <0 0 4 &gic 0 161 IRQ_TYPE_LEVEL_HIGH>, + <0 0 5 &gic 0 162 IRQ_TYPE_LEVEL_HIGH>, + <0 0 6 &gic 0 163 IRQ_TYPE_LEVEL_HIGH>, + <0 0 7 &gic 0 164 IRQ_TYPE_LEVEL_HIGH>, + <0 0 8 &gic 0 165 IRQ_TYPE_LEVEL_HIGH>, + <0 0 9 &gic 0 166 IRQ_TYPE_LEVEL_HIGH>, + <0 0 10 &gic 0 167 IRQ_TYPE_LEVEL_HIGH>, + <0 0 11 &gic 0 168 IRQ_TYPE_LEVEL_HIGH>, + <0 0 12 &gic 0 169 IRQ_TYPE_LEVEL_HIGH>; + + /include/ "juno-motherboard.dtsi" + }; diff --git a/arch/arm64/boot/dts/arm/juno.dts b/arch/arm64/boot/dts/arm/juno.dts index 7ab0713..60e8928 100644 --- a/arch/arm64/boot/dts/arm/juno.dts +++ b/arch/arm64/boot/dts/arm/juno.dts @@ -98,26 +98,6 @@ <0x00000008 0x80000000 0x1 0x80000000>; }; - gic: interrupt-controller@2c010000 { - compatible = "arm,gic-400", "arm,cortex-a15-gic"; - reg = <0x0 0x2c010000 0 0x1000>, - <0x0 0x2c02f000 0 0x2000>, - <0x0 0x2c04f000 0 0x2000>, - <0x0 0x2c06f000 0 0x2000>; - #address-cells = <0>; - #interrupt-cells = <3>; - interrupt-controller; - interrupts = ; - }; - - timer { - compatible = "arm,armv8-timer"; - interrupts = , - , - , - ; - }; - pmu { compatible = "arm,armv8-pmuv3"; interrupts = , @@ -134,105 +114,5 @@ <&A53_3>; }; - /include/ "juno-clocks.dtsi" - - dma@7ff00000 { - compatible = "arm,pl330", "arm,primecell"; - reg = <0x0 0x7ff00000 0 0x1000>; - #dma-cells = <1>; - #dma-channels = <8>; - #dma-requests = <32>; - interrupts = , - , - , - , - , - , - , - ; - clocks = <&soc_faxiclk>; - clock-names = "apb_pclk"; - }; - - soc_uart0: uart@7ff80000 { - compatible = "arm,pl011", "arm,primecell"; - reg = <0x0 0x7ff80000 0x0 0x1000>; - interrupts = ; - clocks = <&soc_uartclk>, <&soc_refclk100mhz>; - clock-names = "uartclk", "apb_pclk"; - }; - - i2c@7ffa0000 { - compatible = "snps,designware-i2c"; - reg = <0x0 0x7ffa0000 0x0 0x1000>; - #address-cells = <1>; - #size-cells = <0>; - interrupts = ; - clock-frequency = <400000>; - i2c-sda-hold-time-ns = <500>; - clocks = <&soc_smc50mhz>; - - dvi0: dvi-transmitter@70 { - compatible = "nxp,tda998x"; - reg = <0x70>; - }; - - dvi1: dvi-transmitter@71 { - compatible = "nxp,tda998x"; - reg = <0x71>; - }; - }; - - ohci@7ffb0000 { - compatible = "generic-ohci"; - reg = <0x0 0x7ffb0000 0x0 0x10000>; - interrupts = ; - clocks = <&soc_usb48mhz>; - }; - - ehci@7ffc0000 { - compatible = "generic-ehci"; - reg = <0x0 0x7ffc0000 0x0 0x10000>; - interrupts = ; - clocks = <&soc_usb48mhz>; - }; - - memory-controller@7ffd0000 { - compatible = "arm,pl354", "arm,primecell"; - reg = <0 0x7ffd0000 0 0x1000>; - interrupts = , - ; - clocks = <&soc_smc50mhz>; - clock-names = "apb_pclk"; - }; - - smb { - compatible = "simple-bus"; - #address-cells = <2>; - #size-cells = <1>; - ranges = <0 0 0 0x08000000 0x04000000>, - <1 0 0 0x14000000 0x04000000>, - <2 0 0 0x18000000 0x04000000>, - <3 0 0 0x1c000000 0x04000000>, - <4 0 0 0x0c000000 0x04000000>, - <5 0 0 0x10000000 0x04000000>; - - #interrupt-cells = <1>; - interrupt-map-mask = <0 0 15>; - interrupt-map = <0 0 0 &gic 0 68 IRQ_TYPE_LEVEL_HIGH>, - <0 0 1 &gic 0 69 IRQ_TYPE_LEVEL_HIGH>, - <0 0 2 &gic 0 70 IRQ_TYPE_LEVEL_HIGH>, - <0 0 3 &gic 0 160 IRQ_TYPE_LEVEL_HIGH>, - <0 0 4 &gic 0 161 IRQ_TYPE_LEVEL_HIGH>, - <0 0 5 &gic 0 162 IRQ_TYPE_LEVEL_HIGH>, - <0 0 6 &gic 0 163 IRQ_TYPE_LEVEL_HIGH>, - <0 0 7 &gic 0 164 IRQ_TYPE_LEVEL_HIGH>, - <0 0 8 &gic 0 165 IRQ_TYPE_LEVEL_HIGH>, - <0 0 9 &gic 0 166 IRQ_TYPE_LEVEL_HIGH>, - <0 0 10 &gic 0 167 IRQ_TYPE_LEVEL_HIGH>, - <0 0 11 &gic 0 168 IRQ_TYPE_LEVEL_HIGH>, - <0 0 12 &gic 0 169 IRQ_TYPE_LEVEL_HIGH>; - - /include/ "juno-motherboard.dtsi" - }; + #include "juno-base.dtsi" }; -- 2.3.6 -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/