Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S2992438AbbEOOcn (ORCPT ); Fri, 15 May 2015 10:32:43 -0400 Received: from mailout3.samsung.com ([203.254.224.33]:45172 "EHLO mailout3.samsung.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1753937AbbEOObV (ORCPT ); Fri, 15 May 2015 10:31:21 -0400 X-AuditID: cbfee691-f79ca6d00000456a-e8-555603377d31 From: Chanwoo Choi To: linux-kernel@vger.kernel.org Cc: myungjoo.ham@samsung.com, cw00.choi@samsung.com, k.kozlowski@samsung.com, ckeepax@opensource.wolfsonmicro.com, gg@slimlogic.co.uk, kishon@ti.com, jaewon02.kim@samsung.com, rogerq@ti.com, ramakrishna.pallala@intel.com, george.cherian@ti.com, balbi@ti.com, aaro.koskinen@iki.fi Subject: [PATCH 1/2] extcon: Use the unique id for external connector instead of string Date: Fri, 15 May 2015 23:31:17 +0900 Message-id: <1431700278-30465-2-git-send-email-cw00.choi@samsung.com> X-Mailer: git-send-email 1.8.5.5 In-reply-to: <1431700278-30465-1-git-send-email-cw00.choi@samsung.com> References: <1431700278-30465-1-git-send-email-cw00.choi@samsung.com> X-Brightmail-Tracker: H4sIAAAAAAAAA+NgFvrPLMWRmVeSWpSXmKPExsWyRsSkUNecOSzU4O5VaYs1LxwsDt6vt/g3 5Qa7xfUvz1ktTh1czmrRv8XFYkfDEVaL1y8MLS487WGzuLxrDpvF7cYVbBYL39xksuh5pOXA 63H460IWj8V7XjJ5vJz4m82jb8sqRo+pU/4yehy/sZ3J4/MmuQD2KC6blNSczLLUIn27BK6M i18a2Qp2z2Wu2PbqB3sDY+9lpi5GTg4JAROJ5auusUDYYhIX7q1n62Lk4hASWMoosWTKAlaY oqOzNjNDJKYzSsxu28QMkhAS+MIoseynI4jNJqAlsf/FDTYQW0RAQWJz7zNWkAZmgblMEnMm 7QGbJCwQKbH63An2LkYODhYBVYlXE81AwrwCrhL9yy8yQyxTkFi2fCZYOaeAm8SlPTeZQcqF gGoOL5ABGSkhcIldYs6nu2C7WAQEJL5NPsQCUiMhICux6QDUGEmJgytusExgFF7AyLCKUTS1 ILmgOCm9yFSvODG3uDQvXS85P3cTIzBeTv97NnEH4/0D1ocYBTgYlXh4ExxCQ4VYE8uKK3MP MZoCbZjILCWanA+MyrySeENjMyMLUxNTYyNzSzMlcV4d6Z/BQgLpiSWp2ampBalF8UWlOanF hxiZODilGhgn36s4sfzavavc+xySBM7LHJQXUBV7GSbd8cf6YMWfvDO8C0MPyZ+S+H09IDVo jfetwm0Xb09iynByqHcNtPrHOe3Uz+vrgv7ZhTsZq89Yp+B09O6tNTlcmqEBl59O+vJwaf/1 7AzX6SLGWo/lG27vsJ5gkq3X59S8Ou/wqmc2cl+Dr/q6rS1RYinOSDTUYi4qTgQAiy0xL5IC AAA= X-Brightmail-Tracker: H4sIAAAAAAAAA+NgFjrJIsWRmVeSWpSXmKPExsVy+t9jQV1z5rBQg+Nv+CzWvHCwOHi/3uLf lBvsFte/PGe1OHVwOatF/xYXix0NR1gtXr8wtLjwtIfN4vKuOWwWtxtXsFksfHOTyaLnkZYD r8fhrwtZPBbvecnk8XLibzaPvi2rGD2mTvnL6HH8xnYmj8+b5ALYoxoYbTJSE1NSixRS85Lz UzLz0m2VvIPjneNNzQwMdQ0tLcyVFPISc1NtlVx8AnTdMnOATlVSKEvMKQUKBSQWFyvp22Ga EBripmsB0xih6xsSBNdjZIAGEtYwZlz80shWsHsuc8W2Vz/YGxh7LzN1MXJySAiYSBydtZkZ whaTuHBvPVsXIxeHkMB0RonZbZvAEkICXxgllv10BLHZBLQk9r+4wQZiiwgoSGzufcYK0sAs MJdJYs6kPawgCWGBSInV506wdzFycLAIqEq8mmgGEuYVcJXoX34RapmCxLLlM8HKOQXcJC7t uckMUi4EVHN4gcwERt4FjAyrGEVTC5ILipPScw31ihNzi0vz0vWS83M3MYKj8ZnUDsaVDRaH GAU4GJV4eBMdQkOFWBPLiitzDzFKcDArifDWMISFCvGmJFZWpRblxxeV5qQWH2I0BbppIrOU aHI+MFHklcQbGpuYGVkamRtaGBmbK4nznsz3CRUSSE8sSc1OTS1ILYLpY+LglGpg3CBmXuqs pZHLHafcIKgi8NxjqmpJ/SnZBEVuFanUFVW9ccKGk/0earDJZGxfdUFCrcV00iMrnzz2OQn2 KTv/Htn0Yd3xmu+B8R3RBgvSvggsNouwWf5vq+6eAv6mvcV/HZVeRez49/RuW1lD9HvRwxKd OcUCSx7ND43Z5VQy56vwuUKpzSZKLMUZiYZazEXFiQDklE4O3AIAAA== DLP-Filter: Pass X-MTR: 20000000000000000@CPGS X-CFilter-Loop: Reflected Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 51604 Lines: 1569 This patch uses the unique id to identify the type of external connector instead of string name. The string name have the many potential issues. So, this patch defines the 'extcon' enumeration which includes all supported external connector on EXTCON subsystem. If new external connector is necessary, the unique id of new connector have to be added in 'extcon' enumeration. There are current supported external connector in 'enum extcon' as following: enum extcon { EXTCON_NONE = 0x0, /* NONE */ /* USB external connector */ EXTCON_USB = 0x1, /* USB */ EXTCON_USB_HOST = 0x2, /* USB-HOST */ /* Charger external connector */ EXTCON_TA = 0x10, /* TA */ EXTCON_FAST_CHARGER = 0x11, /* FAST-CHARGER */ EXTCON_SLOW_CHARGER = 0x12, /* SLOW-CHARGER */ EXTCON_CHARGE_DOWNSTREAM= 0x13, /* CHARGE-DOWNSTREAM */ /* Audio and video external connector */ EXTCON_LINE_IN = 0x20, /* LINE-IN */ EXTCON_LINE_OUT = 0x21, /* LINE-OUT */ EXTCON_MICROPHONE = 0x22, /* MICROPHONE */ EXTCON_HEADPHONE = 0x23, /* HEADPHONE */ EXTCON_HDMI = 0x30, /* HDMI */ EXTCON_MHL = 0x31, /* MHL */ EXTCON_DVI = 0x32, /* DVI */ EXTCON_VGA = 0x33, /* VGA */ EXTCON_SPDIF_IN = 0x34, /* SPDIF-IN */ EXTCON_SPDIF_OUT = 0x35, /* SPDIF-OUT */ EXTCON_VIDEO_IN = 0x36, /* VIDEO-IN */ EXTCON_VIDEO_OUT = 0x37, /* VIDEO-OUT */ /* Miscellaneous external connector */ EXTCON_DOCK = 0x50, /* DOCK */ EXTCON_JIG = 0x51, /* JIG */ EXTCON_MECHANICAL = 0x52, /* MECHANICAL */ __EXTCON_END, }; For exmaple in extcon-arizoan.c: To use unique id removes the potential issue about handling the inconsistent name of external connector with string. - Previously, use the string to register the type of arizona jack connector static const char *arizona_cable[] = { "Mechanical", "Microphone", "Headphone", "Line-out", }; - Newly, use the unique id to register the type of arizona jack connector static const enum extcon arizona_cable[] = { EXTCON_MECHANICAL, EXTCON_MICROPHONE, EXTCON_HEADPHONE, EXTCON_LINE_OUT, EXTCON_NONE, }; And this patch modify the prototype of extcon_{get|set}_cable_state_() which uses the 'enum extcon id' instead of 'cable_index'. Because although one more extcon drivers support USB cable, each extcon driver might has the differnt 'cable_index' for USB cable. All extcon drivers can use the unique id number for same external connector with modified extcon_{get|set}_cable_state_(). - Previously, use 'cable_index' on these functions: extcon_get_cable_state_(struct extcon_dev*, int cable_index) extcon_set_cable_state_(struct extcon_dev*, int cable_index, bool state) -Newly, use 'enum extcon id' on these functions: extcon_get_cable_state_(struct extcon_dev*, enum extcon id) extcon_set_cable_state_(struct extcon_dev*, enum extcon id, bool state) Signed-off-by: Chanwoo Choi Cc: MyungJoo Ham Cc: Krzysztof Kozlowski Cc: Charles Keepax Cc: Graeme Gregory Cc: Kishon Vijay Abraham I Cc: Jaewon Kim Cc: Roger Quadros Cc: Ramakrishna Pallala --- drivers/extcon/extcon-arizona.c | 38 +++----- drivers/extcon/extcon-axp288.c | 24 ++--- drivers/extcon/extcon-max14577.c | 45 ++++----- drivers/extcon/extcon-max77693.c | 95 +++++++++---------- drivers/extcon/extcon-max77843.c | 56 +++++------ drivers/extcon/extcon-max8997.c | 59 +++++------- drivers/extcon/extcon-palmas.c | 22 +++-- drivers/extcon/extcon-rt8973a.c | 40 +++----- drivers/extcon/extcon-sm5502.c | 32 ++----- drivers/extcon/extcon-usb-gpio.c | 32 ++----- drivers/extcon/extcon.c | 166 ++++++++++++++++++++------------- include/linux/extcon.h | 92 +++++++++--------- include/linux/extcon/extcon-adc-jack.h | 5 +- 13 files changed, 326 insertions(+), 380 deletions(-) diff --git a/drivers/extcon/extcon-arizona.c b/drivers/extcon/extcon-arizona.c index 1ec06b4..9262b45 100644 --- a/drivers/extcon/extcon-arizona.c +++ b/drivers/extcon/extcon-arizona.c @@ -118,17 +118,12 @@ static const int arizona_micd_levels[] = { 1257, }; -#define ARIZONA_CABLE_MECHANICAL 0 -#define ARIZONA_CABLE_MICROPHONE 1 -#define ARIZONA_CABLE_HEADPHONE 2 -#define ARIZONA_CABLE_LINEOUT 3 - -static const char *arizona_cable[] = { - "Mechanical", - "Microphone", - "Headphone", - "Line-out", - NULL, +static const enum extcon arizona_cable[] = { + EXTCON_MECHANICAL, + EXTCON_MICROPHONE, + EXTCON_HEADPHONE, + EXTCON_LINE_OUT, + EXTCON_NONE, }; static void arizona_start_hpdet_acc_id(struct arizona_extcon_info *info); @@ -557,7 +552,7 @@ static irqreturn_t arizona_hpdet_irq(int irq, void *data) struct arizona_extcon_info *info = data; struct arizona *arizona = info->arizona; int id_gpio = arizona->pdata.hpdet_id_gpio; - int report = ARIZONA_CABLE_HEADPHONE; + enum extcon report = EXTCON_HEADPHONE; int ret, reading; bool mic = false; @@ -571,7 +566,7 @@ static irqreturn_t arizona_hpdet_irq(int irq, void *data) } /* If the cable was removed while measuring ignore the result */ - ret = extcon_get_cable_state_(info->edev, ARIZONA_CABLE_MECHANICAL); + ret = extcon_get_cable_state_(info->edev, EXTCON_MECHANICAL); if (ret < 0) { dev_err(arizona->dev, "Failed to check cable state: %d\n", ret); @@ -602,9 +597,9 @@ static irqreturn_t arizona_hpdet_irq(int irq, void *data) /* Report high impedence cables as line outputs */ if (reading >= 5000) - report = ARIZONA_CABLE_LINEOUT; + report = EXTCON_LINE_OUT; else - report = ARIZONA_CABLE_HEADPHONE; + report = EXTCON_HEADPHONE; ret = extcon_set_cable_state_(info->edev, report, true); if (ret != 0) @@ -689,8 +684,7 @@ err: ARIZONA_ACCDET_MODE_MASK, ARIZONA_ACCDET_MODE_MIC); /* Just report headphone */ - ret = extcon_set_cable_state_(info->edev, - ARIZONA_CABLE_HEADPHONE, true); + ret = extcon_set_cable_state_(info->edev, EXTCON_HEADPHONE, true); if (ret != 0) dev_err(arizona->dev, "Failed to report headphone: %d\n", ret); @@ -747,8 +741,7 @@ err: ARIZONA_ACCDET_MODE_MASK, ARIZONA_ACCDET_MODE_MIC); /* Just report headphone */ - ret = extcon_set_cable_state_(info->edev, - ARIZONA_CABLE_HEADPHONE, true); + ret = extcon_set_cable_state_(info->edev, EXTCON_HEADPHONE, true); if (ret != 0) dev_err(arizona->dev, "Failed to report headphone: %d\n", ret); @@ -787,7 +780,7 @@ static void arizona_micd_detect(struct work_struct *work) mutex_lock(&info->lock); /* If the cable was removed while measuring ignore the result */ - ret = extcon_get_cable_state_(info->edev, ARIZONA_CABLE_MECHANICAL); + ret = extcon_get_cable_state_(info->edev, EXTCON_MECHANICAL); if (ret < 0) { dev_err(arizona->dev, "Failed to check cable state: %d\n", ret); @@ -836,8 +829,7 @@ static void arizona_micd_detect(struct work_struct *work) arizona_identify_headphone(info); ret = extcon_set_cable_state_(info->edev, - ARIZONA_CABLE_MICROPHONE, true); - + EXTCON_MICROPHONE, true); if (ret != 0) dev_err(arizona->dev, "Headset report failed: %d\n", ret); @@ -1028,7 +1020,7 @@ static irqreturn_t arizona_jackdet(int irq, void *data) if (info->last_jackdet == present) { dev_dbg(arizona->dev, "Detected jack\n"); ret = extcon_set_cable_state_(info->edev, - ARIZONA_CABLE_MECHANICAL, true); + EXTCON_MECHANICAL, true); if (ret != 0) dev_err(arizona->dev, "Mechanical report failed: %d\n", diff --git a/drivers/extcon/extcon-axp288.c b/drivers/extcon/extcon-axp288.c index 8299adb..3605aa96 100644 --- a/drivers/extcon/extcon-axp288.c +++ b/drivers/extcon/extcon-axp288.c @@ -77,10 +77,6 @@ /* IRQ enable-6 register */ #define BC12_IRQ_CFG_MASK BIT(1) -#define AXP288_EXTCON_SLOW_CHARGER "SLOW-CHARGER" -#define AXP288_EXTCON_DOWNSTREAM_CHARGER "CHARGE-DOWNSTREAM" -#define AXP288_EXTCON_FAST_CHARGER "FAST-CHARGER" - enum axp288_extcon_reg { AXP288_PS_STAT_REG = 0x00, AXP288_PS_BOOT_REASON_REG = 0x02, @@ -105,11 +101,11 @@ enum axp288_extcon_irq { EXTCON_IRQ_END, }; -static const char *axp288_extcon_cables[] = { - AXP288_EXTCON_SLOW_CHARGER, - AXP288_EXTCON_DOWNSTREAM_CHARGER, - AXP288_EXTCON_FAST_CHARGER, - NULL, +static const enum extcon axp288_extcon_cables[] = { + EXTCON_SLOW_CHARGER, + EXTCON_CHARGE_DOWNSTREAM, + EXTCON_FAST_CHARGER, + EXTCON_NONE, }; struct axp288_extcon_info { @@ -161,7 +157,7 @@ static void axp288_extcon_log_rsi(struct axp288_extcon_info *info) static int axp288_handle_chrg_det_event(struct axp288_extcon_info *info) { static bool notify_otg, notify_charger; - static char *cable; + static enum extcon cable; int ret, stat, cfg, pwr_stat; u8 chrg_type; bool vbus_attach = false; @@ -196,18 +192,18 @@ static int axp288_handle_chrg_det_event(struct axp288_extcon_info *info) dev_dbg(info->dev, "sdp cable is connecetd\n"); notify_otg = true; notify_charger = true; - cable = AXP288_EXTCON_SLOW_CHARGER; + cable = EXTCON_SLOW_CHARGER; break; case DET_STAT_CDP: dev_dbg(info->dev, "cdp cable is connecetd\n"); notify_otg = true; notify_charger = true; - cable = AXP288_EXTCON_DOWNSTREAM_CHARGER; + cable = EXTCON_CHARGE_DOWNSTREAM; break; case DET_STAT_DCP: dev_dbg(info->dev, "dcp cable is connecetd\n"); notify_charger = true; - cable = AXP288_EXTCON_FAST_CHARGER; + cable = EXTCON_FAST_CHARGER; break; default: dev_warn(info->dev, @@ -230,7 +226,7 @@ notify_otg: } if (notify_charger) - extcon_set_cable_state(info->edev, cable, vbus_attach); + extcon_set_cable_state_(info->edev, cable, vbus_attach); /* Clear the flags on disconnect event */ if (!vbus_attach) diff --git a/drivers/extcon/extcon-max14577.c b/drivers/extcon/extcon-max14577.c index ad8f8dd..e7c3edb 100644 --- a/drivers/extcon/extcon-max14577.c +++ b/drivers/extcon/extcon-max14577.c @@ -148,27 +148,14 @@ enum max14577_muic_acc_type { MAX14577_MUIC_ADC_OPEN, }; -/* max14577 MUIC device support below list of accessories(external connector) */ -enum { - EXTCON_CABLE_USB = 0, - EXTCON_CABLE_TA, - EXTCON_CABLE_FAST_CHARGER, - EXTCON_CABLE_SLOW_CHARGER, - EXTCON_CABLE_CHARGE_DOWNSTREAM, - EXTCON_CABLE_JIG, - - _EXTCON_CABLE_NUM, -}; - -static const char *max14577_extcon_cable[] = { - [EXTCON_CABLE_USB] = "USB", - [EXTCON_CABLE_TA] = "TA", - [EXTCON_CABLE_FAST_CHARGER] = "Fast-charger", - [EXTCON_CABLE_SLOW_CHARGER] = "Slow-charger", - [EXTCON_CABLE_CHARGE_DOWNSTREAM] = "Charge-downstream", - [EXTCON_CABLE_JIG] = "JIG", - - NULL, +static const enum extcon max14577_extcon_cable[] = { + EXTCON_USB, + EXTCON_TA, + EXTCON_FAST_CHARGER, + EXTCON_SLOW_CHARGER, + EXTCON_CHARGE_DOWNSTREAM, + EXTCON_JIG, + EXTCON_NONE, }; /* @@ -369,7 +356,7 @@ static int max14577_muic_jig_handler(struct max14577_muic_info *info, if (ret < 0) return ret; - extcon_set_cable_state(info->edev, "JIG", attached); + extcon_set_cable_state_(info->edev, EXTCON_JIG, attached); return 0; } @@ -466,20 +453,22 @@ static int max14577_muic_chg_handler(struct max14577_muic_info *info) if (ret < 0) return ret; - extcon_set_cable_state(info->edev, "USB", attached); + extcon_set_cable_state_(info->edev, EXTCON_USB, attached); break; case MAX14577_CHARGER_TYPE_DEDICATED_CHG: - extcon_set_cable_state(info->edev, "TA", attached); + extcon_set_cable_state_(info->edev, EXTCON_TA, attached); break; case MAX14577_CHARGER_TYPE_DOWNSTREAM_PORT: - extcon_set_cable_state(info->edev, - "Charge-downstream", attached); + extcon_set_cable_state_(info->edev, EXTCON_CHARGE_DOWNSTREAM, + attached); break; case MAX14577_CHARGER_TYPE_SPECIAL_500MA: - extcon_set_cable_state(info->edev, "Slow-charger", attached); + extcon_set_cable_state_(info->edev, EXTCON_SLOW_CHARGER, + attached); break; case MAX14577_CHARGER_TYPE_SPECIAL_1A: - extcon_set_cable_state(info->edev, "Fast-charger", attached); + extcon_set_cable_state_(info->edev, EXTCON_FAST_CHARGER, + attached); break; case MAX14577_CHARGER_TYPE_NONE: case MAX14577_CHARGER_TYPE_DEAD_BATTERY: diff --git a/drivers/extcon/extcon-max77693.c b/drivers/extcon/extcon-max77693.c index c274249..20e796e 100644 --- a/drivers/extcon/extcon-max77693.c +++ b/drivers/extcon/extcon-max77693.c @@ -200,32 +200,17 @@ enum max77693_muic_acc_type { /* * MAX77693 MUIC device support below list of accessories(external connector) */ -enum { - EXTCON_CABLE_USB = 0, - EXTCON_CABLE_USB_HOST, - EXTCON_CABLE_TA, - EXTCON_CABLE_FAST_CHARGER, - EXTCON_CABLE_SLOW_CHARGER, - EXTCON_CABLE_CHARGE_DOWNSTREAM, - EXTCON_CABLE_MHL, - EXTCON_CABLE_JIG, - EXTCON_CABLE_DOCK, - - _EXTCON_CABLE_NUM, -}; - -static const char *max77693_extcon_cable[] = { - [EXTCON_CABLE_USB] = "USB", - [EXTCON_CABLE_USB_HOST] = "USB-Host", - [EXTCON_CABLE_TA] = "TA", - [EXTCON_CABLE_FAST_CHARGER] = "Fast-charger", - [EXTCON_CABLE_SLOW_CHARGER] = "Slow-charger", - [EXTCON_CABLE_CHARGE_DOWNSTREAM] = "Charge-downstream", - [EXTCON_CABLE_MHL] = "MHL", - [EXTCON_CABLE_JIG] = "JIG", - [EXTCON_CABLE_DOCK] = "DOCK", - - NULL, +static const enum extcon max77693_extcon_cable[] = { + EXTCON_USB, + EXTCON_USB_HOST, + EXTCON_TA, + EXTCON_FAST_CHARGER, + EXTCON_SLOW_CHARGER, + EXTCON_CHARGE_DOWNSTREAM, + EXTCON_MHL, + EXTCON_JIG, + EXTCON_DOCK, + EXTCON_NONE, }; /* @@ -472,7 +457,7 @@ static int max77693_muic_dock_handler(struct max77693_muic_info *info, int ret = 0; int vbvolt; bool cable_attached; - char dock_name[CABLE_NAME_MAX]; + enum extcon dock_id; dev_info(info->dev, "external connector is %s (adc:0x%02x)\n", @@ -517,16 +502,16 @@ static int max77693_muic_dock_handler(struct max77693_muic_info *info, if (ret < 0) return ret; - extcon_set_cable_state(info->edev, "DOCK", attached); - extcon_set_cable_state(info->edev, "MHL", attached); + extcon_set_cable_state_(info->edev, EXTCON_DOCK, attached); + extcon_set_cable_state_(info->edev, EXTCON_MHL, attached); goto out; case MAX77693_MUIC_ADC_AUDIO_MODE_REMOTE: /* Dock-Desk */ - strcpy(dock_name, "DOCK"); + dock_id = EXTCON_DOCK; break; case MAX77693_MUIC_ADC_AV_CABLE_NOLOAD: /* Dock-Audio */ - strcpy(dock_name, "DOCK"); + dock_id = EXTCON_DOCK; if (!attached) - extcon_set_cable_state(info->edev, "USB", false); + extcon_set_cable_state_(info->edev, EXTCON_USB, false); break; default: dev_err(info->dev, "failed to detect %s dock device\n", @@ -538,7 +523,7 @@ static int max77693_muic_dock_handler(struct max77693_muic_info *info, ret = max77693_muic_set_path(info, CONTROL1_SW_AUDIO, attached); if (ret < 0) return ret; - extcon_set_cable_state(info->edev, dock_name, attached); + extcon_set_cable_state_(info->edev, dock_id, attached); out: return 0; @@ -603,20 +588,19 @@ static int max77693_muic_adc_ground_handler(struct max77693_muic_info *info) ret = max77693_muic_set_path(info, CONTROL1_SW_USB, attached); if (ret < 0) return ret; - extcon_set_cable_state(info->edev, "USB-Host", attached); + extcon_set_cable_state_(info->edev, EXTCON_USB_HOST, attached); break; case MAX77693_MUIC_GND_AV_CABLE_LOAD: /* Audio Video Cable with load, PATH:AUDIO */ ret = max77693_muic_set_path(info, CONTROL1_SW_AUDIO, attached); if (ret < 0) return ret; - extcon_set_cable_state(info->edev, - "Audio-video-load", attached); + extcon_set_cable_state_(info->edev, EXTCON_USB, attached); break; case MAX77693_MUIC_GND_MHL: case MAX77693_MUIC_GND_MHL_VB: /* MHL or MHL with USB/TA cable */ - extcon_set_cable_state(info->edev, "MHL", attached); + extcon_set_cable_state_(info->edev, EXTCON_MHL, attached); break; default: dev_err(info->dev, "failed to detect %s cable of gnd type\n", @@ -658,7 +642,7 @@ static int max77693_muic_jig_handler(struct max77693_muic_info *info, if (ret < 0) return ret; - extcon_set_cable_state(info->edev, "JIG", attached); + extcon_set_cable_state_(info->edev, EXTCON_JIG, attached); return 0; } @@ -812,10 +796,10 @@ static int max77693_muic_chg_handler(struct max77693_muic_info *info) * - Support charging through micro-usb port without * data connection */ - extcon_set_cable_state(info->edev, "TA", attached); + extcon_set_cable_state_(info->edev, EXTCON_TA, attached); if (!cable_attached) - extcon_set_cable_state(info->edev, - "MHL", cable_attached); + extcon_set_cable_state_(info->edev, EXTCON_MHL, + cable_attached); break; } @@ -838,11 +822,12 @@ static int max77693_muic_chg_handler(struct max77693_muic_info *info) * - Support charging through micro-usb port without * data connection. */ - extcon_set_cable_state(info->edev, "USB", attached); + extcon_set_cable_state_(info->edev, EXTCON_USB, + attached); if (!cable_attached) - extcon_set_cable_state(info->edev, "DOCK", - cable_attached); + extcon_set_cable_state_(info->edev, EXTCON_DOCK, + cable_attached); break; case MAX77693_MUIC_ADC_RESERVED_ACC_3: /* Dock-Smart */ /* @@ -870,9 +855,10 @@ static int max77693_muic_chg_handler(struct max77693_muic_info *info) if (ret < 0) return ret; - extcon_set_cable_state(info->edev, "DOCK", attached); - extcon_set_cable_state(info->edev, "MHL", attached); - + extcon_set_cable_state_(info->edev, EXTCON_DOCK, + attached); + extcon_set_cable_state_(info->edev, EXTCON_MHL, + attached); break; } @@ -905,23 +891,26 @@ static int max77693_muic_chg_handler(struct max77693_muic_info *info) if (ret < 0) return ret; - extcon_set_cable_state(info->edev, "USB", attached); + extcon_set_cable_state_(info->edev, EXTCON_USB, + attached); break; case MAX77693_CHARGER_TYPE_DEDICATED_CHG: /* Only TA cable */ - extcon_set_cable_state(info->edev, "TA", attached); + extcon_set_cable_state_(info->edev, EXTCON_TA, attached); break; } break; case MAX77693_CHARGER_TYPE_DOWNSTREAM_PORT: - extcon_set_cable_state(info->edev, - "Charge-downstream", attached); + extcon_set_cable_state_(info->edev, EXTCON_CHARGE_DOWNSTREAM, + attached); break; case MAX77693_CHARGER_TYPE_APPLE_500MA: - extcon_set_cable_state(info->edev, "Slow-charger", attached); + extcon_set_cable_state_(info->edev, EXTCON_SLOW_CHARGER, + attached); break; case MAX77693_CHARGER_TYPE_APPLE_1A_2A: - extcon_set_cable_state(info->edev, "Fast-charger", attached); + extcon_set_cable_state_(info->edev, EXTCON_FAST_CHARGER, + attached); break; case MAX77693_CHARGER_TYPE_DEAD_BATTERY: break; diff --git a/drivers/extcon/extcon-max77843.c b/drivers/extcon/extcon-max77843.c index 5746d7b..d78a64d 100644 --- a/drivers/extcon/extcon-max77843.c +++ b/drivers/extcon/extcon-max77843.c @@ -118,28 +118,16 @@ enum max77843_muic_charger_type { MAX77843_MUIC_CHG_GND, }; -enum { - MAX77843_CABLE_USB = 0, - MAX77843_CABLE_USB_HOST, - MAX77843_CABLE_TA, - MAX77843_CABLE_CHARGE_DOWNSTREAM, - MAX77843_CABLE_FAST_CHARGER, - MAX77843_CABLE_SLOW_CHARGER, - MAX77843_CABLE_MHL, - MAX77843_CABLE_JIG, - - MAX77843_CABLE_NUM, -}; - -static const char *max77843_extcon_cable[] = { - [MAX77843_CABLE_USB] = "USB", - [MAX77843_CABLE_USB_HOST] = "USB-HOST", - [MAX77843_CABLE_TA] = "TA", - [MAX77843_CABLE_CHARGE_DOWNSTREAM] = "CHARGER-DOWNSTREAM", - [MAX77843_CABLE_FAST_CHARGER] = "FAST-CHARGER", - [MAX77843_CABLE_SLOW_CHARGER] = "SLOW-CHARGER", - [MAX77843_CABLE_MHL] = "MHL", - [MAX77843_CABLE_JIG] = "JIG", +static const enum extcon max77843_extcon_cable[] = { + EXTCON_USB, + EXTCON_USB_HOST, + EXTCON_TA, + EXTCON_CHARGE_DOWNSTREAM, + EXTCON_FAST_CHARGER, + EXTCON_SLOW_CHARGER, + EXTCON_MHL, + EXTCON_JIG, + EXTCON_NONE, }; struct max77843_muic_irq { @@ -354,7 +342,7 @@ static int max77843_muic_adc_gnd_handler(struct max77843_muic_info *info) if (ret < 0) return ret; - extcon_set_cable_state(info->edev, "USB-HOST", attached); + extcon_set_cable_state_(info->edev, EXTCON_USB_HOST, attached); break; case MAX77843_MUIC_GND_MHL_VB: case MAX77843_MUIC_GND_MHL: @@ -362,7 +350,7 @@ static int max77843_muic_adc_gnd_handler(struct max77843_muic_info *info) if (ret < 0) return ret; - extcon_set_cable_state(info->edev, "MHL", attached); + extcon_set_cable_state_(info->edev, EXTCON_MHL, attached); break; default: dev_err(info->dev, "failed to detect %s accessory(gnd:0x%x)\n", @@ -398,7 +386,7 @@ static int max77843_muic_jig_handler(struct max77843_muic_info *info, if (ret < 0) return ret; - extcon_set_cable_state(info->edev, "JIG", attached); + extcon_set_cable_state_(info->edev, EXTCON_JIG, attached); return 0; } @@ -490,36 +478,38 @@ static int max77843_muic_chg_handler(struct max77843_muic_info *info) if (ret < 0) return ret; - extcon_set_cable_state(info->edev, "USB", attached); + extcon_set_cable_state_(info->edev, EXTCON_USB, attached); break; case MAX77843_MUIC_CHG_DOWNSTREAM: ret = max77843_muic_set_path(info, CONTROL1_SW_OPEN, attached); if (ret < 0) return ret; - extcon_set_cable_state(info->edev, - "CHARGER-DOWNSTREAM", attached); + extcon_set_cable_state_(info->edev, EXTCON_CHARGE_DOWNSTREAM, + attached); break; case MAX77843_MUIC_CHG_DEDICATED: ret = max77843_muic_set_path(info, CONTROL1_SW_OPEN, attached); if (ret < 0) return ret; - extcon_set_cable_state(info->edev, "TA", attached); + extcon_set_cable_state_(info->edev, EXTCON_TA, attached); break; case MAX77843_MUIC_CHG_SPECIAL_500MA: ret = max77843_muic_set_path(info, CONTROL1_SW_OPEN, attached); if (ret < 0) return ret; - extcon_set_cable_state(info->edev, "SLOW-CHAREGER", attached); + extcon_set_cable_state_(info->edev, EXTCON_SLOW_CHARGER, + attached); break; case MAX77843_MUIC_CHG_SPECIAL_1A: ret = max77843_muic_set_path(info, CONTROL1_SW_OPEN, attached); if (ret < 0) return ret; - extcon_set_cable_state(info->edev, "FAST-CHARGER", attached); + extcon_set_cable_state_(info->edev, EXTCON_FAST_CHARGER, + attached); break; case MAX77843_MUIC_CHG_GND: gnd_type = max77843_muic_get_cable_type(info, @@ -527,9 +517,9 @@ static int max77843_muic_chg_handler(struct max77843_muic_info *info) /* Charger cable on MHL accessory is attach or detach */ if (gnd_type == MAX77843_MUIC_GND_MHL_VB) - extcon_set_cable_state(info->edev, "TA", true); + extcon_set_cable_state_(info->edev, EXTCON_TA, true); else if (gnd_type == MAX77843_MUIC_GND_MHL) - extcon_set_cable_state(info->edev, "TA", false); + extcon_set_cable_state_(info->edev, EXTCON_TA, false); break; case MAX77843_MUIC_CHG_NONE: break; diff --git a/drivers/extcon/extcon-max8997.c b/drivers/extcon/extcon-max8997.c index 33613c4..4d10949 100644 --- a/drivers/extcon/extcon-max8997.c +++ b/drivers/extcon/extcon-max8997.c @@ -145,32 +145,17 @@ struct max8997_muic_info { int path_uart; }; -enum { - EXTCON_CABLE_USB = 0, - EXTCON_CABLE_USB_HOST, - EXTCON_CABLE_TA, - EXTCON_CABLE_FAST_CHARGER, - EXTCON_CABLE_SLOW_CHARGER, - EXTCON_CABLE_CHARGE_DOWNSTREAM, - EXTCON_CABLE_MHL, - EXTCON_CABLE_DOCK, - EXTCON_CABLE_JIG, - - _EXTCON_CABLE_NUM, -}; - -static const char *max8997_extcon_cable[] = { - [EXTCON_CABLE_USB] = "USB", - [EXTCON_CABLE_USB_HOST] = "USB-Host", - [EXTCON_CABLE_TA] = "TA", - [EXTCON_CABLE_FAST_CHARGER] = "Fast-charger", - [EXTCON_CABLE_SLOW_CHARGER] = "Slow-charger", - [EXTCON_CABLE_CHARGE_DOWNSTREAM] = "Charge-downstream", - [EXTCON_CABLE_MHL] = "MHL", - [EXTCON_CABLE_DOCK] = "DOCK", - [EXTCON_CABLE_JIG] = "JIG", - - NULL, +static const enum extcon max8997_extcon_cable[] = { + EXTCON_USB, + EXTCON_USB_HOST, + EXTCON_TA, + EXTCON_FAST_CHARGER, + EXTCON_SLOW_CHARGER, + EXTCON_CHARGE_DOWNSTREAM, + EXTCON_MHL, + EXTCON_DOCK, + EXTCON_JIG, + EXTCON_NONE, }; /* @@ -345,10 +330,10 @@ static int max8997_muic_handle_usb(struct max8997_muic_info *info, switch (usb_type) { case MAX8997_USB_HOST: - extcon_set_cable_state(info->edev, "USB-Host", attached); + extcon_set_cable_state_(info->edev, EXTCON_USB_HOST, attached); break; case MAX8997_USB_DEVICE: - extcon_set_cable_state(info->edev, "USB", attached); + extcon_set_cable_state_(info->edev, EXTCON_USB, attached); break; default: dev_err(info->dev, "failed to detect %s usb cable\n", @@ -373,7 +358,7 @@ static int max8997_muic_handle_dock(struct max8997_muic_info *info, switch (cable_type) { case MAX8997_MUIC_ADC_AV_CABLE_NOLOAD: case MAX8997_MUIC_ADC_FACTORY_MODE_UART_ON: - extcon_set_cable_state(info->edev, "DOCK", attached); + extcon_set_cable_state_(info->edev, EXTCON_DOCK, attached); break; default: dev_err(info->dev, "failed to detect %s dock device\n", @@ -396,7 +381,7 @@ static int max8997_muic_handle_jig_uart(struct max8997_muic_info *info, return ret; } - extcon_set_cable_state(info->edev, "JIG", attached); + extcon_set_cable_state_(info->edev, EXTCON_JIG, attached); return 0; } @@ -418,7 +403,7 @@ static int max8997_muic_adc_handler(struct max8997_muic_info *info) return ret; break; case MAX8997_MUIC_ADC_MHL: - extcon_set_cable_state(info->edev, "MHL", attached); + extcon_set_cable_state_(info->edev, EXTCON_MHL, attached); break; case MAX8997_MUIC_ADC_FACTORY_MODE_USB_OFF: case MAX8997_MUIC_ADC_FACTORY_MODE_USB_ON: @@ -501,17 +486,19 @@ static int max8997_muic_chg_handler(struct max8997_muic_info *info) } break; case MAX8997_CHARGER_TYPE_DOWNSTREAM_PORT: - extcon_set_cable_state(info->edev, - "Charge-downstream", attached); + extcon_set_cable_state_(info->edev, EXTCON_CHARGE_DOWNSTREAM, + attached); break; case MAX8997_CHARGER_TYPE_DEDICATED_CHG: - extcon_set_cable_state(info->edev, "TA", attached); + extcon_set_cable_state_(info->edev, EXTCON_TA, attached); break; case MAX8997_CHARGER_TYPE_500MA: - extcon_set_cable_state(info->edev, "Slow-charger", attached); + extcon_set_cable_state_(info->edev, EXTCON_SLOW_CHARGER, + attached); break; case MAX8997_CHARGER_TYPE_1A: - extcon_set_cable_state(info->edev, "Fast-charger", attached); + extcon_set_cable_state_(info->edev, EXTCON_FAST_CHARGER, + attached); break; default: dev_err(info->dev, diff --git a/drivers/extcon/extcon-palmas.c b/drivers/extcon/extcon-palmas.c index 9c8943d..d689540 100644 --- a/drivers/extcon/extcon-palmas.c +++ b/drivers/extcon/extcon-palmas.c @@ -29,10 +29,10 @@ #include #include -static const char *palmas_extcon_cable[] = { - [0] = "USB", - [1] = "USB-HOST", - NULL, +static const enum extcon palmas_extcon_cable[] = { + EXTCON_USB, + EXTCON_USB_HOST, + EXTCON_NONE, }; static const int mutually_exclusive[] = {0x3, 0x0}; @@ -49,6 +49,7 @@ static void palmas_usb_wakeup(struct palmas *palmas, int enable) static irqreturn_t palmas_vbus_irq_handler(int irq, void *_palmas_usb) { struct palmas_usb *palmas_usb = _palmas_usb; + struct extcon_dev *edev = palmas_usb->edev; unsigned int vbus_line_state; palmas_read(palmas_usb->palmas, PALMAS_INTERRUPT_BASE, @@ -57,7 +58,7 @@ static irqreturn_t palmas_vbus_irq_handler(int irq, void *_palmas_usb) if (vbus_line_state & PALMAS_INT3_LINE_STATE_VBUS) { if (palmas_usb->linkstat != PALMAS_USB_STATE_VBUS) { palmas_usb->linkstat = PALMAS_USB_STATE_VBUS; - extcon_set_cable_state(palmas_usb->edev, "USB", true); + extcon_set_cable_state_(edev, EXTCON_USB, true); dev_info(palmas_usb->dev, "USB cable is attached\n"); } else { dev_dbg(palmas_usb->dev, @@ -66,7 +67,7 @@ static irqreturn_t palmas_vbus_irq_handler(int irq, void *_palmas_usb) } else if (!(vbus_line_state & PALMAS_INT3_LINE_STATE_VBUS)) { if (palmas_usb->linkstat == PALMAS_USB_STATE_VBUS) { palmas_usb->linkstat = PALMAS_USB_STATE_DISCONNECT; - extcon_set_cable_state(palmas_usb->edev, "USB", false); + extcon_set_cable_state_(edev, EXTCON_USB, false); dev_info(palmas_usb->dev, "USB cable is detached\n"); } else { dev_dbg(palmas_usb->dev, @@ -81,6 +82,7 @@ static irqreturn_t palmas_id_irq_handler(int irq, void *_palmas_usb) { unsigned int set, id_src; struct palmas_usb *palmas_usb = _palmas_usb; + struct extcon_dev *edev = palmas_usb->edev; palmas_read(palmas_usb->palmas, PALMAS_USB_OTG_BASE, PALMAS_USB_ID_INT_LATCH_SET, &set); @@ -93,7 +95,7 @@ static irqreturn_t palmas_id_irq_handler(int irq, void *_palmas_usb) PALMAS_USB_ID_INT_LATCH_CLR, PALMAS_USB_ID_INT_EN_HI_CLR_ID_GND); palmas_usb->linkstat = PALMAS_USB_STATE_ID; - extcon_set_cable_state(palmas_usb->edev, "USB-HOST", true); + extcon_set_cable_state_(edev, EXTCON_USB_HOST, true); dev_info(palmas_usb->dev, "USB-HOST cable is attached\n"); } else if ((set & PALMAS_USB_ID_INT_SRC_ID_FLOAT) && (id_src & PALMAS_USB_ID_INT_SRC_ID_FLOAT)) { @@ -101,17 +103,17 @@ static irqreturn_t palmas_id_irq_handler(int irq, void *_palmas_usb) PALMAS_USB_ID_INT_LATCH_CLR, PALMAS_USB_ID_INT_EN_HI_CLR_ID_FLOAT); palmas_usb->linkstat = PALMAS_USB_STATE_DISCONNECT; - extcon_set_cable_state(palmas_usb->edev, "USB-HOST", false); + extcon_set_cable_state_(edev, EXTCON_USB_HOST, false); dev_info(palmas_usb->dev, "USB-HOST cable is detached\n"); } else if ((palmas_usb->linkstat == PALMAS_USB_STATE_ID) && (!(set & PALMAS_USB_ID_INT_SRC_ID_GND))) { palmas_usb->linkstat = PALMAS_USB_STATE_DISCONNECT; - extcon_set_cable_state(palmas_usb->edev, "USB-HOST", false); + extcon_set_cable_state_(edev, EXTCON_USB_HOST, false); dev_info(palmas_usb->dev, "USB-HOST cable is detached\n"); } else if ((palmas_usb->linkstat == PALMAS_USB_STATE_DISCONNECT) && (id_src & PALMAS_USB_ID_INT_SRC_ID_GND)) { palmas_usb->linkstat = PALMAS_USB_STATE_ID; - extcon_set_cable_state(palmas_usb->edev, "USB-HOST", true); + extcon_set_cable_state_(edev, EXTCON_USB_HOST, true); dev_info(palmas_usb->dev, " USB-HOST cable is attached\n"); } diff --git a/drivers/extcon/extcon-rt8973a.c b/drivers/extcon/extcon-rt8973a.c index 04447f3..f2a8672 100644 --- a/drivers/extcon/extcon-rt8973a.c +++ b/drivers/extcon/extcon-rt8973a.c @@ -90,21 +90,12 @@ static struct reg_data rt8973a_reg_data[] = { }; /* List of detectable cables */ -enum { - EXTCON_CABLE_USB = 0, - EXTCON_CABLE_USB_HOST, - EXTCON_CABLE_TA, - EXTCON_CABLE_JIG, - - EXTCON_CABLE_END, -}; - -static const char *rt8973a_extcon_cable[] = { - [EXTCON_CABLE_USB] = "USB", - [EXTCON_CABLE_USB_HOST] = "USB-Host", - [EXTCON_CABLE_TA] = "TA", - [EXTCON_CABLE_JIG] = "JIG", - NULL, +static const enum extcon rt8973a_extcon_cable[] = { + EXTCON_USB, + EXTCON_USB_HOST, + EXTCON_TA, + EXTCON_JIG, + EXTCON_NONE, }; /* Define OVP (Over Voltage Protection), OTP (Over Temperature Protection) */ @@ -307,14 +298,11 @@ static int rt8973a_muic_cable_handler(struct rt8973a_muic_info *info, enum rt8973a_event_type event) { static unsigned int prev_cable_type; - const char **cable_names = info->edev->supported_cable; unsigned int con_sw = DM_DP_SWITCH_UART; - int ret, idx = 0, cable_type; + int ret, cable_type; + enum extcon id; bool attached = false; - if (!cable_names) - return 0; - switch (event) { case RT8973A_EVENT_ATTACH: cable_type = rt8973a_muic_get_cable_type(info); @@ -341,25 +329,25 @@ static int rt8973a_muic_cable_handler(struct rt8973a_muic_info *info, switch (cable_type) { case RT8973A_MUIC_ADC_OTG: - idx = EXTCON_CABLE_USB_HOST; + id = EXTCON_USB_HOST; con_sw = DM_DP_SWITCH_USB; break; case RT8973A_MUIC_ADC_TA: - idx = EXTCON_CABLE_TA; + id = EXTCON_TA; con_sw = DM_DP_SWITCH_OPEN; break; case RT8973A_MUIC_ADC_FACTORY_MODE_BOOT_OFF_USB: case RT8973A_MUIC_ADC_FACTORY_MODE_BOOT_ON_USB: - idx = EXTCON_CABLE_JIG; + id = EXTCON_JIG; con_sw = DM_DP_SWITCH_USB; break; case RT8973A_MUIC_ADC_FACTORY_MODE_BOOT_OFF_UART: case RT8973A_MUIC_ADC_FACTORY_MODE_BOOT_ON_UART: - idx = EXTCON_CABLE_JIG; + id = EXTCON_JIG; con_sw = DM_DP_SWITCH_UART; break; case RT8973A_MUIC_ADC_USB: - idx = EXTCON_CABLE_USB; + id = EXTCON_USB; con_sw = DM_DP_SWITCH_USB; break; case RT8973A_MUIC_ADC_OPEN: @@ -409,7 +397,7 @@ static int rt8973a_muic_cable_handler(struct rt8973a_muic_info *info, return ret; /* Change the state of external accessory */ - extcon_set_cable_state(info->edev, cable_names[idx], attached); + extcon_set_cable_state_(info->edev, id, attached); return 0; } diff --git a/drivers/extcon/extcon-sm5502.c b/drivers/extcon/extcon-sm5502.c index 6f1d11f..520693d 100644 --- a/drivers/extcon/extcon-sm5502.c +++ b/drivers/extcon/extcon-sm5502.c @@ -92,19 +92,11 @@ static struct reg_data sm5502_reg_data[] = { }; /* List of detectable cables */ -enum { - EXTCON_CABLE_USB = 0, - EXTCON_CABLE_USB_HOST, - EXTCON_CABLE_TA, - - EXTCON_CABLE_END, -}; - -static const char *sm5502_extcon_cable[] = { - [EXTCON_CABLE_USB] = "USB", - [EXTCON_CABLE_USB_HOST] = "USB-Host", - [EXTCON_CABLE_TA] = "TA", - NULL, +static const enum extcon sm5502_extcon_cable[] = { + EXTCON_USB, + EXTCON_USB_HOST, + EXTCON_TA, + EXTCON_NONE, }; /* Define supported accessory type */ @@ -377,16 +369,12 @@ static int sm5502_muic_cable_handler(struct sm5502_muic_info *info, bool attached) { static unsigned int prev_cable_type = SM5502_MUIC_ADC_GROUND; - const char **cable_names = info->edev->supported_cable; unsigned int cable_type = SM5502_MUIC_ADC_GROUND; unsigned int con_sw = DM_DP_SWITCH_OPEN; unsigned int vbus_sw = VBUSIN_SWITCH_OPEN; - unsigned int idx = 0; + enum extcon id; int ret; - if (!cable_names) - return 0; - /* Get the type of attached or detached cable */ if (attached) cable_type = sm5502_muic_get_cable_type(info); @@ -396,17 +384,17 @@ static int sm5502_muic_cable_handler(struct sm5502_muic_info *info, switch (cable_type) { case SM5502_MUIC_ADC_OPEN_USB: - idx = EXTCON_CABLE_USB; + id = EXTCON_USB; con_sw = DM_DP_SWITCH_USB; vbus_sw = VBUSIN_SWITCH_VBUSOUT_WITH_USB; break; case SM5502_MUIC_ADC_OPEN_TA: - idx = EXTCON_CABLE_TA; + id = EXTCON_TA; con_sw = DM_DP_SWITCH_OPEN; vbus_sw = VBUSIN_SWITCH_VBUSOUT; break; case SM5502_MUIC_ADC_OPEN_USB_OTG: - idx = EXTCON_CABLE_USB_HOST; + id = EXTCON_USB_HOST; con_sw = DM_DP_SWITCH_USB; vbus_sw = VBUSIN_SWITCH_OPEN; break; @@ -422,7 +410,7 @@ static int sm5502_muic_cable_handler(struct sm5502_muic_info *info, return ret; /* Change the state of external accessory */ - extcon_set_cable_state(info->edev, cable_names[idx], attached); + extcon_set_cable_state_(info->edev, id, attached); return 0; } diff --git a/drivers/extcon/extcon-usb-gpio.c b/drivers/extcon/extcon-usb-gpio.c index 160ec12..4cf4f19 100644 --- a/drivers/extcon/extcon-usb-gpio.c +++ b/drivers/extcon/extcon-usb-gpio.c @@ -39,18 +39,10 @@ struct usb_extcon_info { struct delayed_work wq_detcable; }; -/* List of detectable cables */ -enum { - EXTCON_CABLE_USB = 0, - EXTCON_CABLE_USB_HOST, - - EXTCON_CABLE_END, -}; - -static const char *usb_extcon_cable[] = { - [EXTCON_CABLE_USB] = "USB", - [EXTCON_CABLE_USB_HOST] = "USB-HOST", - NULL, +static const enum extcon usb_extcon_cable[] = { + EXTCON_USB, + EXTCON_USB_HOST, + EXTCON_NONE, }; static void usb_extcon_detect_cable(struct work_struct *work) @@ -68,24 +60,16 @@ static void usb_extcon_detect_cable(struct work_struct *work) * As we don't have event for USB peripheral cable attached, * we simulate USB peripheral attach here. */ - extcon_set_cable_state(info->edev, - usb_extcon_cable[EXTCON_CABLE_USB_HOST], - false); - extcon_set_cable_state(info->edev, - usb_extcon_cable[EXTCON_CABLE_USB], - true); + extcon_set_cable_state_(info->edev, EXTCON_USB_HOST, false); + extcon_set_cable_state_(info->edev, EXTCON_USB, true); } else { /* * ID = 0 means USB HOST cable attached. * As we don't have event for USB peripheral cable detached, * we simulate USB peripheral detach here. */ - extcon_set_cable_state(info->edev, - usb_extcon_cable[EXTCON_CABLE_USB], - false); - extcon_set_cable_state(info->edev, - usb_extcon_cable[EXTCON_CABLE_USB_HOST], - true); + extcon_set_cable_state_(info->edev, EXTCON_USB, false); + extcon_set_cable_state_(info->edev, EXTCON_USB_HOST, true); } } diff --git a/drivers/extcon/extcon.c b/drivers/extcon/extcon.c index 2fb5f75..4aeb585 100644 --- a/drivers/extcon/extcon.c +++ b/drivers/extcon/extcon.c @@ -3,6 +3,9 @@ * * External connector (extcon) class driver * + * Copyright (C) 2015 Samsung Electronics + * Author: Chanwoo Choi + * * Copyright (C) 2012 Samsung Electronics * Author: Donggeun Kim * Author: MyungJoo Ham @@ -32,36 +35,43 @@ #include #include -/* - * extcon_cable_name suggests the standard cable names for commonly used - * cable types. - * - * However, please do not use extcon_cable_name directly for extcon_dev - * struct's supported_cable pointer unless your device really supports - * every single port-type of the following cable names. Please choose cable - * names that are actually used in your extcon device. - */ -const char extcon_cable_name[][CABLE_NAME_MAX + 1] = { +#define SUPPORTED_CABLE_MAX 32 +#define CABLE_NAME_MAX 30 + +static const char *extcon_name[] = { + [EXTCON_NONE] = "NONE", + + /* USB external connector */ [EXTCON_USB] = "USB", - [EXTCON_USB_HOST] = "USB-Host", + [EXTCON_USB_HOST] = "USB-HOST", + + /* Charger external connector */ [EXTCON_TA] = "TA", - [EXTCON_FAST_CHARGER] = "Fast-charger", - [EXTCON_SLOW_CHARGER] = "Slow-charger", - [EXTCON_CHARGE_DOWNSTREAM] = "Charge-downstream", + [EXTCON_FAST_CHARGER] = "FAST-CHARGER", + [EXTCON_SLOW_CHARGER] = "SLOW-CHARGER", + [EXTCON_CHARGE_DOWNSTREAM] = "CHARGE-DOWNSTREAM", + + /* Audio/Video external connector */ + [EXTCON_LINE_IN] = "LINE-IN", + [EXTCON_LINE_OUT] = "LINE-OUT", + [EXTCON_MICROPHONE] = "MICROPHONE", + [EXTCON_HEADPHONE] = "HEADPHONE", + [EXTCON_HDMI] = "HDMI", [EXTCON_MHL] = "MHL", [EXTCON_DVI] = "DVI", [EXTCON_VGA] = "VGA", - [EXTCON_DOCK] = "Dock", - [EXTCON_LINE_IN] = "Line-in", - [EXTCON_LINE_OUT] = "Line-out", - [EXTCON_MIC_IN] = "Microphone", - [EXTCON_HEADPHONE_OUT] = "Headphone", - [EXTCON_SPDIF_IN] = "SPDIF-in", - [EXTCON_SPDIF_OUT] = "SPDIF-out", - [EXTCON_VIDEO_IN] = "Video-in", - [EXTCON_VIDEO_OUT] = "Video-out", - [EXTCON_MECHANICAL] = "Mechanical", + [EXTCON_SPDIF_IN] = "SPDIF-IN", + [EXTCON_SPDIF_OUT] = "SPDIF-OUT", + [EXTCON_VIDEO_IN] = "VIDEO-IN", + [EXTCON_VIDEO_OUT] = "VIDEO-OUT", + + /* Etc external connector */ + [EXTCON_DOCK] = "DOCK", + [EXTCON_JIG] = "JIG", + [EXTCON_MECHANICAL] = "MECHANICAL", + + NULL, }; static struct class *extcon_class; @@ -118,11 +128,9 @@ static ssize_t state_show(struct device *dev, struct device_attribute *attr, if (edev->max_supported == 0) return sprintf(buf, "%u\n", edev->state); - for (i = 0; i < SUPPORTED_CABLE_MAX; i++) { - if (!edev->supported_cable[i]) - break; + for (i = 0; i < edev->max_supported; i++) { count += sprintf(buf + count, "%s=%d\n", - edev->supported_cable[i], + extcon_name[edev->supported_cable[i]], !!(edev->state & (1 << i))); } @@ -171,9 +179,10 @@ static ssize_t cable_name_show(struct device *dev, { struct extcon_cable *cable = container_of(attr, struct extcon_cable, attr_name); + int i = cable->cable_index; return sprintf(buf, "%s\n", - cable->edev->supported_cable[cable->cable_index]); + extcon_name[cable->edev->supported_cable[i]]); } static ssize_t cable_state_show(struct device *dev, @@ -282,39 +291,57 @@ int extcon_set_state(struct extcon_dev *edev, u32 state) } EXPORT_SYMBOL_GPL(extcon_set_state); -/** - * extcon_find_cable_index() - Get the cable index based on the cable name. - * @edev: the extcon device that has the cable. - * @cable_name: cable name to be searched. - * - * Note that accessing a cable state based on cable_index is faster than - * cable_name because using cable_name induces a loop with strncmp(). - * Thus, when get/set_cable_state is repeatedly used, using cable_index - * is recommended. - */ -int extcon_find_cable_index(struct extcon_dev *edev, const char *cable_name) +static int extcon_find_cable_index(struct extcon_dev *edev, + const char *cable_name) { + enum extcon id = EXTCON_NONE; int i; - if (edev->supported_cable) { - for (i = 0; edev->supported_cable[i]; i++) { - if (!strncmp(edev->supported_cable[i], - cable_name, CABLE_NAME_MAX)) - return i; + if (edev->max_supported == 0) + return -EINVAL; + + /* Find the the number of extcon cable */ + for (i = 0; i < __EXTCON_END; i++) { + if (!extcon_name[i]) + continue; + if (!strncmp(extcon_name[i], cable_name, CABLE_NAME_MAX)) { + id = i; + break; } } + if (id == EXTCON_NONE) + return -EINVAL; + + /* Find the the index of extcon cable in edev->supported_cable */ + for (i = 0; i < edev->max_supported; i++) { + if (edev->supported_cable[i] == id) + return i; + } + return -EINVAL; } -EXPORT_SYMBOL_GPL(extcon_find_cable_index); /** * extcon_get_cable_state_() - Get the status of a specific cable. * @edev: the extcon device that has the cable. - * @index: cable index that can be retrieved by extcon_find_cable_index(). + * @id: the unique id of each external connector in extcon enumeration. */ -int extcon_get_cable_state_(struct extcon_dev *edev, int index) +int extcon_get_cable_state_(struct extcon_dev *edev, const enum extcon id) { + int i, index = -EINVAL; + + /* Find the the index of extcon cable in edev->supported_cable */ + for (i = 0; edev->max_supported < i; i++) { + if (edev->supported_cable[i] == id) { + index = i; + break; + } + } + + if (i == edev->max_supported) + return -EINVAL; + if (index < 0 || (edev->max_supported && edev->max_supported <= index)) return -EINVAL; @@ -339,15 +366,27 @@ EXPORT_SYMBOL_GPL(extcon_get_cable_state); /** * extcon_set_cable_state_() - Set the status of a specific cable. * @edev: the extcon device that has the cable. - * @index: cable index that can be retrieved by - * extcon_find_cable_index(). - * @cable_state: the new cable status. The default semantics is + * @id: the unique id of each external connector + * in extcon enumeration. + * @state: the new cable status. The default semantics is * true: attached / false: detached. */ -int extcon_set_cable_state_(struct extcon_dev *edev, - int index, bool cable_state) +int extcon_set_cable_state_(struct extcon_dev *edev, enum extcon id, + bool cable_state) { u32 state; + int i, index = -EINVAL; + + /* Find the the index of extcon cable in edev->supported_cable */ + for (i = 0; i < edev->max_supported; i++) { + if (edev->supported_cable[i] == id) { + index = i; + break; + } + } + + if (i == edev->max_supported) + return -EINVAL; if (index < 0 || (edev->max_supported && edev->max_supported <= index)) return -EINVAL; @@ -605,7 +644,7 @@ static void dummy_sysfs_dev_release(struct device *dev) * * Return the pointer of extcon device if success or ERR_PTR(err) if fail */ -struct extcon_dev *extcon_dev_allocate(const char **supported_cable) +struct extcon_dev *extcon_dev_allocate(const enum extcon *supported_cable) { struct extcon_dev *edev; @@ -659,7 +698,7 @@ static void devm_extcon_dev_release(struct device *dev, void *res) * or ERR_PTR(err) if fail */ struct extcon_dev *devm_extcon_dev_allocate(struct device *dev, - const char **supported_cable) + const enum extcon *supported_cable) { struct extcon_dev **ptr, *edev; @@ -709,17 +748,15 @@ int extcon_dev_register(struct extcon_dev *edev) return ret; } - if (edev->supported_cable) { - /* Get size of array */ - for (index = 0; edev->supported_cable[index]; index++) - ; - edev->max_supported = index; - } else { - edev->max_supported = 0; - } + if (!edev->supported_cable) + return -EINVAL; + for (; edev->supported_cable[index] != EXTCON_NONE; index++); + + edev->max_supported = index; if (index > SUPPORTED_CABLE_MAX) { - dev_err(&edev->dev, "extcon: maximum number of supported cables exceeded.\n"); + dev_err(&edev->dev, + "exceed the maximum number of supported cables\n"); return -EINVAL; } @@ -1070,6 +1107,7 @@ static void __exit extcon_class_exit(void) } module_exit(extcon_class_exit); +MODULE_AUTHOR("Chanwoo Choi "); MODULE_AUTHOR("Mike Lockwood "); MODULE_AUTHOR("Donggeun Kim "); MODULE_AUTHOR("MyungJoo Ham "); diff --git a/include/linux/extcon.h b/include/linux/extcon.h index 799474d9d..de158a1 100644 --- a/include/linux/extcon.h +++ b/include/linux/extcon.h @@ -1,6 +1,9 @@ /* * External connector (extcon) class driver * + * Copyright (C) 2015 Samsung Electronics + * Author: Chanwoo Choi + * * Copyright (C) 2012 Samsung Electronics * Author: Donggeun Kim * Author: MyungJoo Ham @@ -27,8 +30,41 @@ #include #include -#define SUPPORTED_CABLE_MAX 32 -#define CABLE_NAME_MAX 30 +enum extcon { + EXTCON_NONE = 0x0, /* NONE */ + + /* USB external connector */ + EXTCON_USB = 0x1, /* USB */ + EXTCON_USB_HOST = 0x2, /* USB-HOST */ + + /* Charger external connector */ + EXTCON_TA = 0x10, /* TA */ + EXTCON_FAST_CHARGER = 0x11, /* FAST-CHARGER */ + EXTCON_SLOW_CHARGER = 0x12, /* SLOW-CHARGER */ + EXTCON_CHARGE_DOWNSTREAM= 0x13, /* CHARGE-DOWNSTREAM */ + + /* Audio/Video external connector */ + EXTCON_LINE_IN = 0x20, /* LINE-IN */ + EXTCON_LINE_OUT = 0x21, /* LINE-OUT */ + EXTCON_MICROPHONE = 0x22, /* MICROPHONE */ + EXTCON_HEADPHONE = 0x23, /* HEADPHONE */ + + EXTCON_HDMI = 0x30, /* HDMI */ + EXTCON_MHL = 0x31, /* MHL */ + EXTCON_DVI = 0x32, /* DVI */ + EXTCON_VGA = 0x33, /* VGA */ + EXTCON_SPDIF_IN = 0x34, /* SPDIF-IN */ + EXTCON_SPDIF_OUT = 0x35, /* SPDIF-OUT */ + EXTCON_VIDEO_IN = 0x36, /* VIDEO-IN */ + EXTCON_VIDEO_OUT = 0x37, /* VIDEO-OUT */ + + /* Etc external connector */ + EXTCON_DOCK = 0x50, /* DOCK */ + EXTCON_JIG = 0x51, /* JIG */ + EXTCON_MECHANICAL = 0x52, /* MECHANICAL */ + + __EXTCON_END, +}; /* * The standard cable name is to help support general notifier @@ -48,29 +84,6 @@ * you don't need such convention. This convention is helpful when * notifier can distinguish but notifiee cannot. */ -enum extcon_cable_name { - EXTCON_USB = 0, - EXTCON_USB_HOST, - EXTCON_TA, /* Travel Adaptor */ - EXTCON_FAST_CHARGER, - EXTCON_SLOW_CHARGER, - EXTCON_CHARGE_DOWNSTREAM, /* Charging an external device */ - EXTCON_HDMI, - EXTCON_MHL, - EXTCON_DVI, - EXTCON_VGA, - EXTCON_DOCK, - EXTCON_LINE_IN, - EXTCON_LINE_OUT, - EXTCON_MIC_IN, - EXTCON_HEADPHONE_OUT, - EXTCON_SPDIF_IN, - EXTCON_SPDIF_OUT, - EXTCON_VIDEO_IN, - EXTCON_VIDEO_OUT, - EXTCON_MECHANICAL, -}; -extern const char extcon_cable_name[][CABLE_NAME_MAX + 1]; struct extcon_cable; @@ -113,7 +126,7 @@ struct extcon_cable; struct extcon_dev { /* Optional user initializing data */ const char *name; - const char **supported_cable; + const enum extcon *supported_cable; const u32 *mutually_exclusive; /* Optional callbacks to override class functions */ @@ -194,10 +207,10 @@ extern struct extcon_dev *extcon_get_extcon_dev(const char *extcon_name); /* * Following APIs control the memory of extcon device. */ -extern struct extcon_dev *extcon_dev_allocate(const char **cables); +extern struct extcon_dev *extcon_dev_allocate(const enum extcon *cable); extern void extcon_dev_free(struct extcon_dev *edev); extern struct extcon_dev *devm_extcon_dev_allocate(struct device *dev, - const char **cables); + const enum extcon *cable); extern void devm_extcon_dev_free(struct device *dev, struct extcon_dev *edev); /* @@ -216,13 +229,10 @@ extern int extcon_update_state(struct extcon_dev *edev, u32 mask, u32 state); /* * get/set_cable_state access each bit of the 32b encoded state value. - * They are used to access the status of each cable based on the cable_name - * or cable_index, which is retrieved by extcon_find_cable_index + * They are used to access the status of each cable based on the cable_name. */ -extern int extcon_find_cable_index(struct extcon_dev *sdev, - const char *cable_name); -extern int extcon_get_cable_state_(struct extcon_dev *edev, int cable_index); -extern int extcon_set_cable_state_(struct extcon_dev *edev, int cable_index, +extern int extcon_get_cable_state_(struct extcon_dev *edev, enum extcon id); +extern int extcon_set_cable_state_(struct extcon_dev *edev, enum extcon id, bool cable_state); extern int extcon_get_cable_state(struct extcon_dev *edev, @@ -281,7 +291,7 @@ static inline int devm_extcon_dev_register(struct device *dev, static inline void devm_extcon_dev_unregister(struct device *dev, struct extcon_dev *edev) { } -static inline struct extcon_dev *extcon_dev_allocate(const char **cables) +static inline struct extcon_dev *extcon_dev_allocate(const enum extcon *cable) { return ERR_PTR(-ENOSYS); } @@ -289,7 +299,7 @@ static inline struct extcon_dev *extcon_dev_allocate(const char **cables) static inline void extcon_dev_free(struct extcon_dev *edev) { } static inline struct extcon_dev *devm_extcon_dev_allocate(struct device *dev, - const char **cables) + const enum extcon *cable) { return ERR_PTR(-ENOSYS); } @@ -312,20 +322,14 @@ static inline int extcon_update_state(struct extcon_dev *edev, u32 mask, return 0; } -static inline int extcon_find_cable_index(struct extcon_dev *edev, - const char *cable_name) -{ - return 0; -} - static inline int extcon_get_cable_state_(struct extcon_dev *edev, - int cable_index) + enum extcon id) { return 0; } static inline int extcon_set_cable_state_(struct extcon_dev *edev, - int cable_index, bool cable_state) + enum extcon id, bool cable_state) { return 0; } diff --git a/include/linux/extcon/extcon-adc-jack.h b/include/linux/extcon/extcon-adc-jack.h index 9ca958c..53c6080 100644 --- a/include/linux/extcon/extcon-adc-jack.h +++ b/include/linux/extcon/extcon-adc-jack.h @@ -44,7 +44,7 @@ struct adc_jack_cond { * @consumer_channel: Unique name to identify the channel on the consumer * side. This typically describes the channels used within * the consumer. E.g. 'battery_voltage' - * @cable_names: array of cable names ending with null. + * @cable_names: array of extcon id for supported cables. * @adc_contitions: array of struct adc_jack_cond conditions ending * with .state = 0 entry. This describes how to decode * adc values into extcon state. @@ -58,8 +58,7 @@ struct adc_jack_pdata { const char *name; const char *consumer_channel; - /* The last entry should be NULL */ - const char **cable_names; + const enum extcon *cable_names; /* The last entry's state should be 0 */ struct adc_jack_cond *adc_conditions; -- 1.8.5.5 -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/