Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1756668AbbEUUsK (ORCPT ); Thu, 21 May 2015 16:48:10 -0400 Received: from mail-pa0-f48.google.com ([209.85.220.48]:32868 "EHLO mail-pa0-f48.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1756464AbbEUUsF (ORCPT ); Thu, 21 May 2015 16:48:05 -0400 From: "Luis R. Rodriguez" To: gregkh@linuxfoundation.org, davem@davemloft.net, clemens@ladisch.de, dmitry.torokhov@gmail.com, JBottomley@odin.com, airlied@linux.ie, mchehab@osg.samsung.com, herbert@gondor.apana.org.au, marcel@holtmann.org, gustavo@padovan.org, johan.hedberg@gmail.com, bp@alien8.de, starvik@axis.com, jesper.nilsson@axis.com, kaloz@openwrt.org, khalasa@piap.pl, ohad@wizery.com, arnd@arndb.de, 3chas3@gmail.com, jslaby@suse.cz, cooloney@gmail.com, rpurdie@rpsys.net, j.anaszewski@samsung.com Cc: pebolle@tiscali.nl, tiwai@suse.de, mcgrof@do-not-panic.com, linux-kernel@vger.kernel.org Subject: [RFC v1] tree-wide: remove "select FW_LOADER" uses Date: Thu, 21 May 2015 13:45:49 -0700 Message-Id: <1432241149-8762-1-git-send-email-mcgrof@do-not-panic.com> X-Mailer: git-send-email 2.1.0 Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 46552 Lines: 1392 There are some some recursive dependency issues one can run into when a kconfig option is selected by a driver, and then kconfig has to figure out whether or not some dependencies are valid for that selected option. For instance in terms of simplifying the logic issue a best as possible on my part and its implications: If a driver selects FW_LOADER but also has a few other selects, kconfig will not allow another driver which also selects FW_LOADER to negate dependency on what that original driver's extra dependencies were. This was recenlty discovered while working on extensions to the firmware_class module with some code being developed [0] to make firmware_class APIs extensible. A possible fix to this is to change a "select FW_LOADER" to "depends FW_LOADER". If we're going to do that we would first need to evaluate if the recursive dependency issue is real or not, and if it is not we should do a tree wide change from all "select FW_LOADER" to "depend FW_LOADER". Upon review with Paul, the recursive dependency issue is actually real mostly because of the complexity of the amount of symbols we handle and how we ended up deciding in logic for "select" and "depends on" to work [1]. Paul did some git archaeological analysis of previous trends on gramatically similar reported recursive issues and found that the generic solution to such problems were to convert "select FOO" to "depends on FOO". This was based on a study of 20 commits with similar reported recursive issue reported since v2.6.36 [2]. Paul also found commit d9b19199e489 ("always enable FW_LOADER unless EMBEDDED=y") which explains that we can then get rid of all "select FW_LOADER" [...] and as per Paul it seems the plan to get rid of those never materialized [2]. Paul also insists that *there is no reason* to think that current logic of the kconfig tools, as it is currently implemented, is flawed [2]. The above history is just *one* set of reasons to remove all kernel "select FW_LOADER" entries. Another simple reason is that since FW_LOADER can only be disabled by an EXPERT and it defaults to y its now a superfluous select. We will ensure things build for you if using EXPERT but if you have selected EXPERT you should know what run time requirements you need. This goes build tested with an allyesconfig and allmodconfig configuration and then disabling FW_LOADER on each build target. This was tested on linux-next tag next-20150518. Should this require rebasing you can regenerate the target patches with: for i in $(git grep "select FW_LOADER$" | \ awk -F":" '{print $1}' | sort | uniq); do \ perl -i -ne 'print if !/select FW_LOADER$/' $i; done [0] https://lkml.org/lkml/2015/5/7/814 [1] https://lkml.org/lkml/2015/5/8/748 [2] https://lkml.org/lkml/2015/5/18/835 Signed-off-by: Luis R. Rodriguez --- I realize tree-wide changes are not encourated like this, but I am doing this as an RFC first to save a few electrons to spare sending out 21 separate e-mails and separate reviews and discussions on one topic alone, should there be any. If this seems reasonable please send me your respective Acked-by's, and I can split up into 21 patches by subsystem: network media sound scsi drm input dell_rbu crypto bluetooth leds atm staging usb tty uwb misc pcmcia remoteproc arm mach-ixp4xx cris x86 microcode If you wish me to just merge a bunch of these together let me know as well. arch/arm/mach-ixp4xx/Kconfig | 1 - arch/cris/arch-v32/drivers/Kconfig | 1 - arch/x86/Kconfig | 3 --- drivers/atm/Kconfig | 2 -- drivers/bluetooth/Kconfig | 7 ------- drivers/crypto/qat/Kconfig | 1 - drivers/firmware/Kconfig | 1 - drivers/gpu/drm/Kconfig | 3 --- drivers/gpu/drm/nouveau/Kconfig | 1 - drivers/input/touchscreen/Kconfig | 1 - drivers/leds/Kconfig | 1 - drivers/media/dvb-frontends/Kconfig | 1 - drivers/media/pci/saa7164/Kconfig | 1 - drivers/media/platform/exynos4-is/Kconfig | 1 - drivers/media/radio/Kconfig | 1 - drivers/media/usb/as102/Kconfig | 1 - drivers/misc/Kconfig | 1 - drivers/misc/ti-st/Kconfig | 1 - drivers/net/ethernet/broadcom/Kconfig | 2 -- drivers/net/ethernet/chelsio/Kconfig | 2 -- drivers/net/ethernet/myricom/Kconfig | 1 - drivers/net/ethernet/qlogic/Kconfig | 2 -- drivers/net/ethernet/realtek/Kconfig | 1 - drivers/net/ethernet/toshiba/Kconfig | 1 - drivers/net/irda/Kconfig | 1 - drivers/net/wimax/i2400m/Kconfig | 1 - drivers/net/wireless/Kconfig | 6 ------ drivers/net/wireless/ath/ar5523/Kconfig | 1 - drivers/net/wireless/ath/carl9170/Kconfig | 1 - drivers/net/wireless/b43/Kconfig | 1 - drivers/net/wireless/b43legacy/Kconfig | 1 - drivers/net/wireless/brcm80211/Kconfig | 4 ---- drivers/net/wireless/ipw2x00/Kconfig | 2 -- drivers/net/wireless/iwlegacy/Kconfig | 1 - drivers/net/wireless/iwlwifi/Kconfig | 1 - drivers/net/wireless/libertas/Kconfig | 1 - drivers/net/wireless/mwifiex/Kconfig | 3 --- drivers/net/wireless/orinoco/Kconfig | 2 -- drivers/net/wireless/p54/Kconfig | 1 - drivers/net/wireless/rt2x00/Kconfig | 1 - drivers/net/wireless/rtlwifi/Kconfig | 1 - drivers/net/wireless/ti/wl1251/Kconfig | 1 - drivers/net/wireless/ti/wlcore/Kconfig | 1 - drivers/net/wireless/zd1211rw/Kconfig | 1 - drivers/pcmcia/Kconfig | 1 - drivers/remoteproc/Kconfig | 1 - drivers/scsi/Kconfig | 1 - drivers/scsi/aic94xx/Kconfig | 1 - drivers/scsi/csiostor/Kconfig | 1 - drivers/scsi/mvsas/Kconfig | 1 - drivers/scsi/qla2xxx/Kconfig | 1 - drivers/staging/rtl8192e/rtl8192e/Kconfig | 1 - drivers/staging/rtl8712/Kconfig | 1 - drivers/staging/vt6656/Kconfig | 1 - drivers/tty/Kconfig | 3 --- drivers/tty/serial/Kconfig | 2 -- drivers/usb/atm/Kconfig | 3 --- drivers/usb/misc/Kconfig | 1 - drivers/uwb/Kconfig | 1 - sound/drivers/Kconfig | 1 - sound/isa/Kconfig | 5 ----- sound/pci/Kconfig | 21 --------------------- sound/pci/hda/Kconfig | 2 -- sound/soc/sh/Kconfig | 1 - sound/usb/Kconfig | 1 - 65 files changed, 121 deletions(-) diff --git a/arch/arm/mach-ixp4xx/Kconfig b/arch/arm/mach-ixp4xx/Kconfig index c342dc4..128bbac 100644 --- a/arch/arm/mach-ixp4xx/Kconfig +++ b/arch/arm/mach-ixp4xx/Kconfig @@ -230,7 +230,6 @@ config IXP4XX_QMGR config IXP4XX_NPE tristate "IXP4xx Network Processor Engine support" - select FW_LOADER help This driver supports IXP4xx built-in network coprocessors and is automatically selected by Ethernet and HSS drivers. diff --git a/arch/cris/arch-v32/drivers/Kconfig b/arch/cris/arch-v32/drivers/Kconfig index 4fc16b4..575c6dd 100644 --- a/arch/cris/arch-v32/drivers/Kconfig +++ b/arch/cris/arch-v32/drivers/Kconfig @@ -331,7 +331,6 @@ config PCI config ETRAX_IOP_FW_LOAD tristate "IO-processor hotplug firmware loading support" depends on ETRAX_ARCH_V32 - select FW_LOADER help Enables IO-processor hotplug firmware loading support. diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig index c92fdcc..f7f8259 100644 --- a/arch/x86/Kconfig +++ b/arch/x86/Kconfig @@ -1099,7 +1099,6 @@ config X86_REBOOTFIXUPS config MICROCODE tristate "CPU microcode loading support" depends on CPU_SUP_AMD || CPU_SUP_INTEL - select FW_LOADER ---help--- If you say Y here, you will be able to update the microcode on @@ -1119,7 +1118,6 @@ config MICROCODE_INTEL bool "Intel microcode loading support" depends on MICROCODE default MICROCODE - select FW_LOADER ---help--- This options enables microcode patch loading support for Intel processors. @@ -1131,7 +1129,6 @@ config MICROCODE_INTEL config MICROCODE_AMD bool "AMD microcode loading support" depends on MICROCODE - select FW_LOADER ---help--- If you select this option, microcode patch loading support for AMD processors will be enabled. diff --git a/drivers/atm/Kconfig b/drivers/atm/Kconfig index 31c6010..33c0558 100644 --- a/drivers/atm/Kconfig +++ b/drivers/atm/Kconfig @@ -328,7 +328,6 @@ config ATM_IA_DEBUG config ATM_FORE200E tristate "FORE Systems 200E-series" depends on (PCI || SBUS) - select FW_LOADER ---help--- This is a driver for the FORE Systems 200E-series ATM adapter cards. It simultaneously supports PCA-200E and SBA-200E models @@ -394,7 +393,6 @@ config ATM_HE_USE_SUNI config ATM_SOLOS tristate "Solos ADSL2+ PCI Multiport card driver" depends on PCI - select FW_LOADER help Support for the Solos multiport ADSL2+ card. diff --git a/drivers/bluetooth/Kconfig b/drivers/bluetooth/Kconfig index 2e77707..389d246 100644 --- a/drivers/bluetooth/Kconfig +++ b/drivers/bluetooth/Kconfig @@ -7,11 +7,9 @@ config BT_INTEL config BT_BCM tristate - select FW_LOADER config BT_RTL tristate - select FW_LOADER config BT_HCIBTUSB tristate "HCI USB driver" @@ -153,7 +151,6 @@ config BT_HCIUART_BCM config BT_HCIBCM203X tristate "HCI BCM203x USB driver" depends on USB - select FW_LOADER help Bluetooth HCI BCM203x USB driver. This driver provides the firmware loading mechanism for the Broadcom @@ -176,7 +173,6 @@ config BT_HCIBPA10X config BT_HCIBFUSB tristate "HCI BlueFRITZ! USB driver" depends on USB - select FW_LOADER help Bluetooth HCI BlueFRITZ! USB driver. This driver provides support for Bluetooth USB devices with AVM @@ -202,7 +198,6 @@ config BT_HCIDTL1 config BT_HCIBT3C tristate "HCI BT3C (PC Card) driver" depends on PCMCIA - select FW_LOADER help Bluetooth HCI BT3C (PC Card) driver. This driver provides support for Bluetooth PCMCIA devices with @@ -265,7 +260,6 @@ config BT_MRVL config BT_MRVL_SDIO tristate "Marvell BT-over-SDIO driver" depends on BT_MRVL && MMC - select FW_LOADER select WANT_DEV_COREDUMP help The driver for Marvell Bluetooth chipsets with SDIO interface. @@ -280,7 +274,6 @@ config BT_MRVL_SDIO config BT_ATH3K tristate "Atheros firmware download driver" depends on BT_HCIBTUSB - select FW_LOADER help Bluetooth firmware download driver. This driver loads the firmware into the Atheros Bluetooth diff --git a/drivers/crypto/qat/Kconfig b/drivers/crypto/qat/Kconfig index 49bede2..3bd3fd9 100644 --- a/drivers/crypto/qat/Kconfig +++ b/drivers/crypto/qat/Kconfig @@ -8,7 +8,6 @@ config CRYPTO_DEV_QAT select CRYPTO_SHA1 select CRYPTO_SHA256 select CRYPTO_SHA512 - select FW_LOADER config CRYPTO_DEV_QAT_DH895xCC tristate "Support for Intel(R) DH895xCC" diff --git a/drivers/firmware/Kconfig b/drivers/firmware/Kconfig index 6517132..19a6db7 100644 --- a/drivers/firmware/Kconfig +++ b/drivers/firmware/Kconfig @@ -63,7 +63,6 @@ config EFI_PCDP config DELL_RBU tristate "BIOS update support for DELL systems via sysfs" depends on X86 - select FW_LOADER select FW_LOADER_USER_HELPER help Say m if you want to have the option of updating the BIOS for your diff --git a/drivers/gpu/drm/Kconfig b/drivers/gpu/drm/Kconfig index 47f2ce8..e0a043f 100644 --- a/drivers/gpu/drm/Kconfig +++ b/drivers/gpu/drm/Kconfig @@ -91,7 +91,6 @@ config DRM_TDFX config DRM_R128 tristate "ATI Rage 128" depends on DRM && PCI - select FW_LOADER help Choose this option if you have an ATI Rage 128 graphics card. If M is selected, the module will be called r128. AGP support for @@ -103,7 +102,6 @@ config DRM_RADEON select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT - select FW_LOADER select DRM_KMS_HELPER select DRM_KMS_FB_HELPER select DRM_TTM @@ -136,7 +134,6 @@ source "drivers/gpu/drm/i915/Kconfig" config DRM_MGA tristate "Matrox g200/g400" depends on DRM && PCI - select FW_LOADER help Choose this option if you have a Matrox G200, G400 or G450 graphics card. If M is selected, the module will be called mga. AGP diff --git a/drivers/gpu/drm/nouveau/Kconfig b/drivers/gpu/drm/nouveau/Kconfig index 5ab13e7..135a5b8 100644 --- a/drivers/gpu/drm/nouveau/Kconfig +++ b/drivers/gpu/drm/nouveau/Kconfig @@ -1,7 +1,6 @@ config DRM_NOUVEAU tristate "Nouveau (NVIDIA) cards" depends on DRM && PCI - select FW_LOADER select DRM_KMS_HELPER select DRM_KMS_FB_HELPER select DRM_TTM diff --git a/drivers/input/touchscreen/Kconfig b/drivers/input/touchscreen/Kconfig index 05e4c6ff..e3e8a7c 100644 --- a/drivers/input/touchscreen/Kconfig +++ b/drivers/input/touchscreen/Kconfig @@ -105,7 +105,6 @@ config TOUCHSCREEN_AR1021_I2C config TOUCHSCREEN_ATMEL_MXT tristate "Atmel mXT I2C Touchscreen" depends on I2C - select FW_LOADER help Say Y here if you have Atmel mXT series I2C touchscreen, such as AT42QT602240/ATMXT224, connected to your system. diff --git a/drivers/leds/Kconfig b/drivers/leds/Kconfig index ec26dd1..76f2e00 100644 --- a/drivers/leds/Kconfig +++ b/drivers/leds/Kconfig @@ -221,7 +221,6 @@ config LEDS_LP3944 config LEDS_LP55XX_COMMON tristate "Common Driver for TI/National LP5521/5523/55231/5562/8501" depends on LEDS_LP5521 || LEDS_LP5523 || LEDS_LP5562 || LEDS_LP8501 - select FW_LOADER help This option supports common operations for LP5521/5523/55231/5562/8501 devices. diff --git a/drivers/media/dvb-frontends/Kconfig b/drivers/media/dvb-frontends/Kconfig index 97c151d..085b1dd 100644 --- a/drivers/media/dvb-frontends/Kconfig +++ b/drivers/media/dvb-frontends/Kconfig @@ -763,7 +763,6 @@ config DVB_LGS8GL5 config DVB_LGS8GXX tristate "Legend Silicon LGS8913/LGS8GL5/LGS8GXX DMB-TH demodulator" depends on DVB_CORE && I2C - select FW_LOADER default m if !MEDIA_SUBDRV_AUTOSELECT help A DMB-TH tuner module. Say Y when you want to support this frontend. diff --git a/drivers/media/pci/saa7164/Kconfig b/drivers/media/pci/saa7164/Kconfig index a53db7d..db72970 100644 --- a/drivers/media/pci/saa7164/Kconfig +++ b/drivers/media/pci/saa7164/Kconfig @@ -2,7 +2,6 @@ config VIDEO_SAA7164 tristate "NXP SAA7164 support" depends on DVB_CORE && VIDEO_DEV && PCI && I2C select I2C_ALGOBIT - select FW_LOADER select VIDEO_TUNER select VIDEO_TVEEPROM select VIDEOBUF_DVB diff --git a/drivers/media/platform/exynos4-is/Kconfig b/drivers/media/platform/exynos4-is/Kconfig index b7b2e47..f54a935 100644 --- a/drivers/media/platform/exynos4-is/Kconfig +++ b/drivers/media/platform/exynos4-is/Kconfig @@ -60,7 +60,6 @@ config VIDEO_EXYNOS4_FIMC_IS depends on HAS_DMA select VIDEOBUF2_DMA_CONTIG depends on OF - select FW_LOADER help This is a V4L2 driver for Samsung EXYNOS4x12 SoC series FIMC-IS (Imaging Subsystem). diff --git a/drivers/media/radio/Kconfig b/drivers/media/radio/Kconfig index 192f36f..631081a 100644 --- a/drivers/media/radio/Kconfig +++ b/drivers/media/radio/Kconfig @@ -214,7 +214,6 @@ config RADIO_WL1273 depends on I2C && VIDEO_V4L2 select MFD_CORE select MFD_WL1273_CORE - select FW_LOADER ---help--- Choose Y here if you have this FM radio chip. diff --git a/drivers/media/usb/as102/Kconfig b/drivers/media/usb/as102/Kconfig index 28aba00..5865029 100644 --- a/drivers/media/usb/as102/Kconfig +++ b/drivers/media/usb/as102/Kconfig @@ -1,7 +1,6 @@ config DVB_AS102 tristate "Abilis AS102 DVB receiver" depends on DVB_CORE && USB && I2C && INPUT - select FW_LOADER help Choose Y or M here if you have a device containing an AS102 diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig index 006242c..382bf64 100644 --- a/drivers/misc/Kconfig +++ b/drivers/misc/Kconfig @@ -489,7 +489,6 @@ config USB_SWITCH_FSA9480 config LATTICE_ECP3_CONFIG tristate "Lattice ECP3 FPGA bitstream configuration via SPI" depends on SPI && SYSFS - select FW_LOADER default n help This option enables support for bitstream configuration (programming diff --git a/drivers/misc/ti-st/Kconfig b/drivers/misc/ti-st/Kconfig index f34dcc5..b434391 100644 --- a/drivers/misc/ti-st/Kconfig +++ b/drivers/misc/ti-st/Kconfig @@ -6,7 +6,6 @@ menu "Texas Instruments shared transport line discipline" config TI_ST tristate "Shared transport core driver" depends on NET && GPIOLIB && TTY - select FW_LOADER help This enables the shared transport core driver for TI BT / FM and GPS combo chips. This enables protocol drivers diff --git a/drivers/net/ethernet/broadcom/Kconfig b/drivers/net/ethernet/broadcom/Kconfig index a6f9142..3c30944 100644 --- a/drivers/net/ethernet/broadcom/Kconfig +++ b/drivers/net/ethernet/broadcom/Kconfig @@ -74,7 +74,6 @@ config BNX2 tristate "QLogic bnx2 support" depends on PCI select CRC32 - select FW_LOADER ---help--- This driver supports QLogic bnx2 gigabit Ethernet cards. @@ -122,7 +121,6 @@ config BNX2X tristate "Broadcom NetXtremeII 10Gb support" depends on PCI select PTP_1588_CLOCK - select FW_LOADER select ZLIB_INFLATE select LIBCRC32C select MDIO diff --git a/drivers/net/ethernet/chelsio/Kconfig b/drivers/net/ethernet/chelsio/Kconfig index 7daa088..72ce340 100644 --- a/drivers/net/ethernet/chelsio/Kconfig +++ b/drivers/net/ethernet/chelsio/Kconfig @@ -49,7 +49,6 @@ config CHELSIO_T1_1G config CHELSIO_T3 tristate "Chelsio Communications T3 10Gb Ethernet support" depends on PCI && INET - select FW_LOADER select MDIO ---help--- This driver supports Chelsio T3-based gigabit and 10Gb Ethernet @@ -69,7 +68,6 @@ config CHELSIO_T3 config CHELSIO_T4 tristate "Chelsio Communications T4/T5 Ethernet support" depends on PCI && (IPV6 || IPV6=n) - select FW_LOADER select MDIO ---help--- This driver supports Chelsio T4 and T5 based gigabit, 10Gb Ethernet diff --git a/drivers/net/ethernet/myricom/Kconfig b/drivers/net/ethernet/myricom/Kconfig index 3932d08..07c2d4c 100644 --- a/drivers/net/ethernet/myricom/Kconfig +++ b/drivers/net/ethernet/myricom/Kconfig @@ -21,7 +21,6 @@ if NET_VENDOR_MYRI config MYRI10GE tristate "Myricom Myri-10G Ethernet support" depends on PCI && INET - select FW_LOADER select CRC32 ---help--- This driver supports Myricom Myri-10G Dual Protocol interface in diff --git a/drivers/net/ethernet/qlogic/Kconfig b/drivers/net/ethernet/qlogic/Kconfig index d49cba1..23efb7f 100644 --- a/drivers/net/ethernet/qlogic/Kconfig +++ b/drivers/net/ethernet/qlogic/Kconfig @@ -30,7 +30,6 @@ config QLA3XXX config QLCNIC tristate "QLOGIC QLCNIC 1/10Gb Converged Ethernet NIC Support" depends on PCI - select FW_LOADER ---help--- This driver supports QLogic QLE8240 and QLE8242 Converged Ethernet devices. @@ -89,7 +88,6 @@ config QLGE config NETXEN_NIC tristate "NetXen Multi port (1/10) Gigabit Ethernet NIC" depends on PCI - select FW_LOADER ---help--- This enables the support for NetXen's Gigabit Ethernet card. diff --git a/drivers/net/ethernet/realtek/Kconfig b/drivers/net/ethernet/realtek/Kconfig index ae5d027..e61f18f 100644 --- a/drivers/net/ethernet/realtek/Kconfig +++ b/drivers/net/ethernet/realtek/Kconfig @@ -103,7 +103,6 @@ config 8139_OLD_RX_RESET config R8169 tristate "Realtek 8169 gigabit ethernet support" depends on PCI - select FW_LOADER select CRC32 select MII ---help--- diff --git a/drivers/net/ethernet/toshiba/Kconfig b/drivers/net/ethernet/toshiba/Kconfig index 5d244b6..ee7a7a7 100644 --- a/drivers/net/ethernet/toshiba/Kconfig +++ b/drivers/net/ethernet/toshiba/Kconfig @@ -43,7 +43,6 @@ config GELIC_WIRELESS config SPIDER_NET tristate "Spider Gigabit Ethernet driver" depends on PCI && PPC_IBM_CELL_BLADE - select FW_LOADER select SUNGEM_PHY ---help--- This driver supports the Gigabit Ethernet chips present on the diff --git a/drivers/net/irda/Kconfig b/drivers/net/irda/Kconfig index a2c227b..52e8c92 100644 --- a/drivers/net/irda/Kconfig +++ b/drivers/net/irda/Kconfig @@ -243,7 +243,6 @@ comment "FIR device drivers" config USB_IRDA tristate "IrDA USB dongles" depends on IRDA && USB - select FW_LOADER ---help--- Say Y here if you want to build support for the USB IrDA FIR Dongle device driver. To compile it as a module, choose M here: the module diff --git a/drivers/net/wimax/i2400m/Kconfig b/drivers/net/wimax/i2400m/Kconfig index 71453db..c35a6936 100644 --- a/drivers/net/wimax/i2400m/Kconfig +++ b/drivers/net/wimax/i2400m/Kconfig @@ -2,7 +2,6 @@ config WIMAX_I2400M tristate depends on WIMAX - select FW_LOADER comment "Enable USB support to see WiMAX USB drivers" depends on USB = n diff --git a/drivers/net/wireless/Kconfig b/drivers/net/wireless/Kconfig index 16604bd..1d7a035 100644 --- a/drivers/net/wireless/Kconfig +++ b/drivers/net/wireless/Kconfig @@ -35,7 +35,6 @@ config PCMCIA_RAYCS config LIBERTAS_THINFIRM tristate "Marvell 8xxx Libertas WLAN driver support with thin firmware" depends on MAC80211 - select FW_LOADER ---help--- A library for Marvell Libertas 8xxx devices using thinfirm. @@ -76,7 +75,6 @@ config ATMEL depends on CFG80211 && (PCI || PCMCIA) select WIRELESS_EXT select WEXT_PRIV - select FW_LOADER select CRC32 ---help--- A driver 802.11b wireless cards based on the Atmel fast-vnet @@ -100,7 +98,6 @@ config PCMCIA_ATMEL tristate "Atmel at76c502/at76c504 PCMCIA cards" depends on ATMEL && PCMCIA select WIRELESS_EXT - select FW_LOADER select CRC32 ---help--- Enable support for PCMCIA cards containing the @@ -109,7 +106,6 @@ config PCMCIA_ATMEL config AT76C50X_USB tristate "Atmel at76c503/at76c505/at76c505a USB cards" depends on MAC80211 && USB - select FW_LOADER ---help--- Enable support for USB Wireless devices using Atmel at76c503, at76c505 or at76c505a chips. @@ -152,7 +148,6 @@ config PRISM54 select WIRELESS_EXT select WEXT_SPY select WEXT_PRIV - select FW_LOADER ---help--- This enables support for FullMAC PCI/Cardbus prism54 devices. This driver is now deprecated in favor for the SoftMAC driver, p54pci. @@ -171,7 +166,6 @@ config USB_ZD1201 depends on CFG80211 && USB select WIRELESS_EXT select WEXT_PRIV - select FW_LOADER ---help--- Say Y if you want to use wireless LAN adapters based on the ZyDAS ZD1201 chip. diff --git a/drivers/net/wireless/ath/ar5523/Kconfig b/drivers/net/wireless/ath/ar5523/Kconfig index 0d320cc..d454af5 100644 --- a/drivers/net/wireless/ath/ar5523/Kconfig +++ b/drivers/net/wireless/ath/ar5523/Kconfig @@ -2,7 +2,6 @@ config AR5523 tristate "Atheros AR5523 wireless driver support" depends on MAC80211 && USB select ATH_COMMON - select FW_LOADER ---help--- This module add support for AR5523 based USB dongles such as D-Link DWL-G132, Netgear WPN111 and many more. diff --git a/drivers/net/wireless/ath/carl9170/Kconfig b/drivers/net/wireless/ath/carl9170/Kconfig index 1a796e5..d89abac 100644 --- a/drivers/net/wireless/ath/carl9170/Kconfig +++ b/drivers/net/wireless/ath/carl9170/Kconfig @@ -2,7 +2,6 @@ config CARL9170 tristate "Linux Community AR9170 802.11n USB support" depends on USB && MAC80211 select ATH_COMMON - select FW_LOADER select CRC32 help This is another driver for the Atheros "otus" 802.11n USB devices. diff --git a/drivers/net/wireless/b43/Kconfig b/drivers/net/wireless/b43/Kconfig index 759fb8d..b47afb8 100644 --- a/drivers/net/wireless/b43/Kconfig +++ b/drivers/net/wireless/b43/Kconfig @@ -3,7 +3,6 @@ config B43 depends on (BCMA_POSSIBLE || SSB_POSSIBLE) && MAC80211 && HAS_DMA select BCMA if B43_BCMA select SSB if B43_SSB - select FW_LOADER ---help--- b43 is a driver for the Broadcom 43xx series wireless devices. diff --git a/drivers/net/wireless/b43legacy/Kconfig b/drivers/net/wireless/b43legacy/Kconfig index 1ffa288..4391c66 100644 --- a/drivers/net/wireless/b43legacy/Kconfig +++ b/drivers/net/wireless/b43legacy/Kconfig @@ -2,7 +2,6 @@ config B43LEGACY tristate "Broadcom 43xx-legacy wireless support (mac80211 stack)" depends on SSB_POSSIBLE && MAC80211 && HAS_DMA select SSB - select FW_LOADER ---help--- b43legacy is a driver for 802.11b devices from Broadcom (BCM4301 and BCM4303) and early model 802.11g chips (BCM4306 Ver. 2) used in the diff --git a/drivers/net/wireless/brcm80211/Kconfig b/drivers/net/wireless/brcm80211/Kconfig index fe3dc12..4901985 100644 --- a/drivers/net/wireless/brcm80211/Kconfig +++ b/drivers/net/wireless/brcm80211/Kconfig @@ -9,7 +9,6 @@ config BRCMSMAC select NEW_LEDS if BCMA_DRIVER_GPIO select LEDS_CLASS if BCMA_DRIVER_GPIO select BRCMUTIL - select FW_LOADER select CORDIC ---help--- This module adds support for PCIe wireless adapters based on Broadcom @@ -38,7 +37,6 @@ config BRCMFMAC_SDIO depends on (MMC = y || MMC = BRCMFMAC) depends on BRCMFMAC select BRCMFMAC_PROTO_BCDC - select FW_LOADER default y ---help--- This option enables the SDIO bus interface support for Broadcom @@ -50,7 +48,6 @@ config BRCMFMAC_USB depends on (USB = y || USB = BRCMFMAC) depends on BRCMFMAC select BRCMFMAC_PROTO_BCDC - select FW_LOADER ---help--- This option enables the USB bus interface support for Broadcom IEEE802.11n embedded FullMAC WLAN driver. Say Y if you want to @@ -62,7 +59,6 @@ config BRCMFMAC_PCIE depends on PCI depends on HAS_DMA select BRCMFMAC_PROTO_MSGBUF - select FW_LOADER ---help--- This option enables the PCIE bus interface support for Broadcom IEEE802.11ac embedded FullMAC WLAN driver. Say Y if you want to diff --git a/drivers/net/wireless/ipw2x00/Kconfig b/drivers/net/wireless/ipw2x00/Kconfig index d6ec44d..ed43128 100644 --- a/drivers/net/wireless/ipw2x00/Kconfig +++ b/drivers/net/wireless/ipw2x00/Kconfig @@ -8,7 +8,6 @@ config IPW2100 select WIRELESS_EXT select WEXT_SPY select WEXT_PRIV - select FW_LOADER select LIB80211 select LIBIPW ---help--- @@ -70,7 +69,6 @@ config IPW2200 select WIRELESS_EXT select WEXT_SPY select WEXT_PRIV - select FW_LOADER select LIB80211 select LIBIPW ---help--- diff --git a/drivers/net/wireless/iwlegacy/Kconfig b/drivers/net/wireless/iwlegacy/Kconfig index fb91972..faa68c9 100644 --- a/drivers/net/wireless/iwlegacy/Kconfig +++ b/drivers/net/wireless/iwlegacy/Kconfig @@ -1,6 +1,5 @@ config IWLEGACY tristate - select FW_LOADER select NEW_LEDS select LEDS_CLASS select LEDS_TRIGGERS diff --git a/drivers/net/wireless/iwlwifi/Kconfig b/drivers/net/wireless/iwlwifi/Kconfig index 99f9760..e01e3c4 100644 --- a/drivers/net/wireless/iwlwifi/Kconfig +++ b/drivers/net/wireless/iwlwifi/Kconfig @@ -1,7 +1,6 @@ config IWLWIFI tristate "Intel Wireless WiFi Next Gen AGN - Wireless-N/Advanced-N/Ultimate-N (iwlwifi) " depends on PCI && MAC80211 && HAS_IOMEM - select FW_LOADER ---help--- Select to build the driver supporting the: diff --git a/drivers/net/wireless/libertas/Kconfig b/drivers/net/wireless/libertas/Kconfig index e6268ce..73c91ae 100644 --- a/drivers/net/wireless/libertas/Kconfig +++ b/drivers/net/wireless/libertas/Kconfig @@ -4,7 +4,6 @@ config LIBERTAS select WIRELESS_EXT select WEXT_SPY select LIB80211 - select FW_LOADER ---help--- A library for Marvell Libertas 8xxx devices. diff --git a/drivers/net/wireless/mwifiex/Kconfig b/drivers/net/wireless/mwifiex/Kconfig index aa01c9b..2e6bb9d 100644 --- a/drivers/net/wireless/mwifiex/Kconfig +++ b/drivers/net/wireless/mwifiex/Kconfig @@ -11,7 +11,6 @@ config MWIFIEX config MWIFIEX_SDIO tristate "Marvell WiFi-Ex Driver for SD8786/SD8787/SD8797/SD8887/SD8897" depends on MWIFIEX && MMC - select FW_LOADER ---help--- This adds support for wireless adapters based on Marvell 8786/8787/8797/8887/8897 chipsets with SDIO interface. @@ -22,7 +21,6 @@ config MWIFIEX_SDIO config MWIFIEX_PCIE tristate "Marvell WiFi-Ex Driver for PCIE 8766/8897" depends on MWIFIEX && PCI - select FW_LOADER ---help--- This adds support for wireless adapters based on Marvell 8766/8897 chipsets with PCIe interface. @@ -33,7 +31,6 @@ config MWIFIEX_PCIE config MWIFIEX_USB tristate "Marvell WiFi-Ex Driver for USB8766/8797/8897" depends on MWIFIEX && USB - select FW_LOADER ---help--- This adds support for wireless adapters based on Marvell 8797/8897 chipset with USB interface. diff --git a/drivers/net/wireless/orinoco/Kconfig b/drivers/net/wireless/orinoco/Kconfig index f6fa3f4..bf8c1ad 100644 --- a/drivers/net/wireless/orinoco/Kconfig +++ b/drivers/net/wireless/orinoco/Kconfig @@ -6,7 +6,6 @@ config HERMES select WIRELESS_EXT select WEXT_SPY select WEXT_PRIV - select FW_LOADER select CRYPTO select CRYPTO_MICHAEL_MIC ---help--- @@ -137,6 +136,5 @@ config PCMCIA_SPECTRUM config ORINOCO_USB tristate "Agere Orinoco USB support" depends on USB && HERMES - select FW_LOADER ---help--- This driver is for USB versions of the Agere Orinoco card. diff --git a/drivers/net/wireless/p54/Kconfig b/drivers/net/wireless/p54/Kconfig index cdafb8c..f2cdec8 100644 --- a/drivers/net/wireless/p54/Kconfig +++ b/drivers/net/wireless/p54/Kconfig @@ -1,7 +1,6 @@ config P54_COMMON tristate "Softmac Prism54 support" depends on MAC80211 - select FW_LOADER select CRC_CCITT ---help--- This is common code for isl38xx/stlc45xx based modules. diff --git a/drivers/net/wireless/rt2x00/Kconfig b/drivers/net/wireless/rt2x00/Kconfig index 2b4ef25..9766408 100644 --- a/drivers/net/wireless/rt2x00/Kconfig +++ b/drivers/net/wireless/rt2x00/Kconfig @@ -244,7 +244,6 @@ config RT2X00_LIB config RT2X00_LIB_FIRMWARE bool - select FW_LOADER config RT2X00_LIB_CRYPTO bool diff --git a/drivers/net/wireless/rtlwifi/Kconfig b/drivers/net/wireless/rtlwifi/Kconfig index 5cf509d..8941e3e 100644 --- a/drivers/net/wireless/rtlwifi/Kconfig +++ b/drivers/net/wireless/rtlwifi/Kconfig @@ -119,7 +119,6 @@ config RTL8192CU config RTLWIFI tristate - select FW_LOADER config RTLWIFI_PCI tristate diff --git a/drivers/net/wireless/ti/wl1251/Kconfig b/drivers/net/wireless/ti/wl1251/Kconfig index 477a206..f1f6c4f 100644 --- a/drivers/net/wireless/ti/wl1251/Kconfig +++ b/drivers/net/wireless/ti/wl1251/Kconfig @@ -1,7 +1,6 @@ menuconfig WL1251 tristate "TI wl1251 driver support" depends on MAC80211 - select FW_LOADER select CRC7 ---help--- This will enable TI wl1251 driver support. The drivers make diff --git a/drivers/net/wireless/ti/wlcore/Kconfig b/drivers/net/wireless/ti/wlcore/Kconfig index 7c09954..538fbd9 100644 --- a/drivers/net/wireless/ti/wlcore/Kconfig +++ b/drivers/net/wireless/ti/wlcore/Kconfig @@ -1,7 +1,6 @@ config WLCORE tristate "TI wlcore support" depends on WL_TI && MAC80211 - select FW_LOADER ---help--- This module contains the main code for TI WLAN chips. It abstracts hardware-specific differences among different chipset families. diff --git a/drivers/net/wireless/zd1211rw/Kconfig b/drivers/net/wireless/zd1211rw/Kconfig index 95920581..eecc4ed 100644 --- a/drivers/net/wireless/zd1211rw/Kconfig +++ b/drivers/net/wireless/zd1211rw/Kconfig @@ -1,7 +1,6 @@ config ZD1211RW tristate "ZyDAS ZD1211/ZD1211B USB-wireless support" depends on USB && MAC80211 - select FW_LOADER ---help--- This is a driver for the ZyDAS ZD1211/ZD1211B wireless chip, present in many USB-wireless adapters. diff --git a/drivers/pcmcia/Kconfig b/drivers/pcmcia/Kconfig index a65f821..d3bbb11 100644 --- a/drivers/pcmcia/Kconfig +++ b/drivers/pcmcia/Kconfig @@ -37,7 +37,6 @@ config PCMCIA config PCMCIA_LOAD_CIS bool "Load CIS updates from userspace" depends on PCMCIA - select FW_LOADER default y help Some PCMCIA cards require an updated Card Information Structure (CIS) diff --git a/drivers/remoteproc/Kconfig b/drivers/remoteproc/Kconfig index 5e343ba..71ee9e3 100644 --- a/drivers/remoteproc/Kconfig +++ b/drivers/remoteproc/Kconfig @@ -5,7 +5,6 @@ config REMOTEPROC tristate depends on HAS_DMA select CRC32 - select FW_LOADER select VIRTIO select VIRTUALIZATION diff --git a/drivers/scsi/Kconfig b/drivers/scsi/Kconfig index b021bcb..27a3c3e 100644 --- a/drivers/scsi/Kconfig +++ b/drivers/scsi/Kconfig @@ -1091,7 +1091,6 @@ config SCSI_SYM53C8XX_MMIO config SCSI_IPR tristate "IBM Power Linux RAID adapter support" depends on PCI && SCSI && ATA - select FW_LOADER ---help--- This driver supports the IBM Power Linux family RAID adapters. This includes IBM pSeries 5712, 5703, 5709, and 570A, as well diff --git a/drivers/scsi/aic94xx/Kconfig b/drivers/scsi/aic94xx/Kconfig index c83fe75..0ed391d 100644 --- a/drivers/scsi/aic94xx/Kconfig +++ b/drivers/scsi/aic94xx/Kconfig @@ -28,7 +28,6 @@ config SCSI_AIC94XX tristate "Adaptec AIC94xx SAS/SATA support" depends on PCI select SCSI_SAS_LIBSAS - select FW_LOADER help This driver supports Adaptec's SAS/SATA 3Gb/s 64 bit PCI-X AIC94xx chip based host adapters. diff --git a/drivers/scsi/csiostor/Kconfig b/drivers/scsi/csiostor/Kconfig index 7c7e508..daf3524 100644 --- a/drivers/scsi/csiostor/Kconfig +++ b/drivers/scsi/csiostor/Kconfig @@ -2,7 +2,6 @@ config SCSI_CHELSIO_FCOE tristate "Chelsio Communications FCoE support" depends on PCI && SCSI depends on SCSI_FC_ATTRS - select FW_LOADER help This driver supports FCoE Offload functionality over Chelsio T4-based 10Gb Converged Network Adapters. diff --git a/drivers/scsi/mvsas/Kconfig b/drivers/scsi/mvsas/Kconfig index 78f7e20..280db51 100644 --- a/drivers/scsi/mvsas/Kconfig +++ b/drivers/scsi/mvsas/Kconfig @@ -29,7 +29,6 @@ config SCSI_MVSAS tristate "Marvell 88SE64XX/88SE94XX SAS/SATA support" depends on PCI select SCSI_SAS_LIBSAS - select FW_LOADER help This driver supports Marvell's SAS/SATA 3Gb/s PCI-E 88SE64XX and 6Gb/s PCI-E 88SE94XX chip based host adapters. diff --git a/drivers/scsi/qla2xxx/Kconfig b/drivers/scsi/qla2xxx/Kconfig index 33f60c9..2bbe0c3 100644 --- a/drivers/scsi/qla2xxx/Kconfig +++ b/drivers/scsi/qla2xxx/Kconfig @@ -2,7 +2,6 @@ config SCSI_QLA_FC tristate "QLogic QLA2XXX Fibre Channel Support" depends on PCI && SCSI depends on SCSI_FC_ATTRS - select FW_LOADER ---help--- This qla2xxx driver supports all QLogic Fibre Channel PCI and PCIe host adapters. diff --git a/drivers/staging/rtl8192e/rtl8192e/Kconfig b/drivers/staging/rtl8192e/rtl8192e/Kconfig index 282e293..ad82bc3 100644 --- a/drivers/staging/rtl8192e/rtl8192e/Kconfig +++ b/drivers/staging/rtl8192e/rtl8192e/Kconfig @@ -5,5 +5,4 @@ config RTL8192E select WIRELESS_EXT select WEXT_PRIV select CRYPTO - select FW_LOADER ---help--- diff --git a/drivers/staging/rtl8712/Kconfig b/drivers/staging/rtl8712/Kconfig index f160eee..b94b0f0 100644 --- a/drivers/staging/rtl8712/Kconfig +++ b/drivers/staging/rtl8712/Kconfig @@ -3,7 +3,6 @@ config R8712U depends on WLAN && USB select WIRELESS_EXT select WEXT_PRIV - select FW_LOADER ---help--- This option adds the Realtek RTL8712 USB device such as the D-Link DWA-130. If built as a module, it will be called r8712u. diff --git a/drivers/staging/vt6656/Kconfig b/drivers/staging/vt6656/Kconfig index b602ef1..142e231 100644 --- a/drivers/staging/vt6656/Kconfig +++ b/drivers/staging/vt6656/Kconfig @@ -1,7 +1,6 @@ config VT6656 tristate "VIA Technologies VT6656 support" depends on MAC80211 && USB && WLAN && m - select FW_LOADER ---help--- This is a vendor-written driver for VIA VT6656. diff --git a/drivers/tty/Kconfig b/drivers/tty/Kconfig index c01f450..17c87a9 100644 --- a/drivers/tty/Kconfig +++ b/drivers/tty/Kconfig @@ -210,7 +210,6 @@ config ROCKETPORT config CYCLADES tristate "Cyclades async mux support" depends on SERIAL_NONSTANDARD && (PCI || ISA) - select FW_LOADER ---help--- This driver supports Cyclades Z and Y multiserial boards. You would need something like this to connect more than two modems to @@ -239,7 +238,6 @@ config CYZ_INTR config MOXA_INTELLIO tristate "Moxa Intellio support" depends on SERIAL_NONSTANDARD && (ISA || EISA || PCI) - select FW_LOADER help Say Y here if you have a Moxa Intellio multiport serial card. @@ -307,7 +305,6 @@ config NOZOMI config ISI tristate "Multi-Tech multiport card support" depends on SERIAL_NONSTANDARD && PCI - select FW_LOADER help This is a driver for the Multi-Tech cards which provide several serial ports. The driver is experimental and can currently only be diff --git a/drivers/tty/serial/Kconfig b/drivers/tty/serial/Kconfig index 43b61f8..e6556bf 100644 --- a/drivers/tty/serial/Kconfig +++ b/drivers/tty/serial/Kconfig @@ -931,7 +931,6 @@ config SERIAL_ICOM tristate "IBM Multiport Serial Adapter" depends on PCI && PPC_PSERIES select SERIAL_CORE - select FW_LOADER help This driver is for a family of multiport serial adapters including 2 port RVX, 2 port internal modem, 4 port internal @@ -1158,7 +1157,6 @@ config SERIAL_QE tristate "Freescale QUICC Engine serial port support" depends on QUICC_ENGINE select SERIAL_CORE - select FW_LOADER default n help This driver supports the QE serial ports on Freescale embedded diff --git a/drivers/usb/atm/Kconfig b/drivers/usb/atm/Kconfig index 0f92294..ec577f8 100644 --- a/drivers/usb/atm/Kconfig +++ b/drivers/usb/atm/Kconfig @@ -19,7 +19,6 @@ if USB_ATM config USB_SPEEDTOUCH tristate "Speedtouch USB support" - select FW_LOADER help Say Y here if you have an SpeedTouch USB or SpeedTouch 330 modem. In order to use your modem you will need to install the @@ -31,7 +30,6 @@ config USB_SPEEDTOUCH config USB_CXACRU tristate "Conexant AccessRunner USB support" - select FW_LOADER help Say Y here if you have an ADSL USB modem based on the Conexant AccessRunner chipset. In order to use your modem you will need to @@ -43,7 +41,6 @@ config USB_CXACRU config USB_UEAGLEATM tristate "ADI 930 and eagle USB DSL modem" - select FW_LOADER help Say Y here if you have an ADSL USB modem based on the ADI 930 or eagle chipset. In order to use your modem you will need to diff --git a/drivers/usb/misc/Kconfig b/drivers/usb/misc/Kconfig index f7a7fc2..84eda08 100644 --- a/drivers/usb/misc/Kconfig +++ b/drivers/usb/misc/Kconfig @@ -214,7 +214,6 @@ config USB_EHSET_TEST_FIXTURE config USB_ISIGHTFW tristate "iSight firmware loading support" - select FW_LOADER help This driver loads firmware for USB Apple iSight cameras, allowing them to be driven by the USB video class driver available at diff --git a/drivers/uwb/Kconfig b/drivers/uwb/Kconfig index c204094..a16b240 100644 --- a/drivers/uwb/Kconfig +++ b/drivers/uwb/Kconfig @@ -58,7 +58,6 @@ config UWB_WHCI config UWB_I1480U tristate "Support for Intel Wireless UWB Link 1480 HWA" depends on UWB_HWA - select FW_LOADER help This driver enables support for the i1480 when connected via USB. It consists of a firmware uploader that will enable it diff --git a/sound/drivers/Kconfig b/sound/drivers/Kconfig index 8545da9..5bba047 100644 --- a/sound/drivers/Kconfig +++ b/sound/drivers/Kconfig @@ -14,7 +14,6 @@ config SND_OPL4_LIB config SND_VX_LIB tristate - select FW_LOADER select SND_HWDEP select SND_PCM diff --git a/sound/isa/Kconfig b/sound/isa/Kconfig index 0216475..82349f9 100644 --- a/sound/isa/Kconfig +++ b/sound/isa/Kconfig @@ -383,7 +383,6 @@ config SND_SBAWE config SND_SB16_CSP bool "Sound Blaster 16/AWE CSP support" depends on (SND_SB16 || SND_SBAWE) && (BROKEN || !PPC) - select FW_LOADER help Say Y here to include support for the CSP core. This special coprocessor can do variable tasks like various compression and @@ -393,7 +392,6 @@ config SND_SSCAPE tristate "Ensoniq SoundScape driver" select SND_MPU401_UART select SND_WSS_LIB - select FW_LOADER help Say Y here to include support for Ensoniq SoundScape and Ensoniq OEM soundcards. @@ -412,7 +410,6 @@ config SND_SSCAPE config SND_WAVEFRONT tristate "Turtle Beach Maui,Tropez,Tropez+ (Wavefront)" - select FW_LOADER select SND_OPL3_LIB select SND_MPU401_UART select SND_WSS_LIB @@ -426,7 +423,6 @@ config SND_WAVEFRONT config SND_MSND_PINNACLE tristate "Turtle Beach MultiSound Pinnacle/Fiji driver" depends on X86 - select FW_LOADER select SND_MPU401_UART select SND_PCM help @@ -439,7 +435,6 @@ config SND_MSND_PINNACLE config SND_MSND_CLASSIC tristate "Support for Turtle Beach MultiSound Classic, Tahiti, Monterey" depends on X86 - select FW_LOADER select SND_MPU401_UART select SND_PCM help diff --git a/sound/pci/Kconfig b/sound/pci/Kconfig index edfc1b8..f357a3d 100644 --- a/sound/pci/Kconfig +++ b/sound/pci/Kconfig @@ -63,7 +63,6 @@ config SND_ALI5451 config SND_ASIHPI tristate "AudioScience ASIxxxx" depends on X86 - select FW_LOADER select SND_PCM select SND_HWDEP help @@ -257,7 +256,6 @@ config SND_CS46XX tristate "Cirrus Logic (Sound Fusion) CS4280/CS461x/CS462x/CS463x" select SND_RAWMIDI select SND_AC97_CODEC - select FW_LOADER help Say Y here to include support for Cirrus Logic CS4610/CS4612/ CS4614/CS4615/CS4622/CS4624/CS4630/CS4280 chips. @@ -314,7 +312,6 @@ config SND_CTXFI config SND_DARLA20 tristate "(Echoaudio) Darla20" - select FW_LOADER select SND_PCM help Say 'Y' or 'M' to include support for Echoaudio Darla. @@ -324,7 +321,6 @@ config SND_DARLA20 config SND_GINA20 tristate "(Echoaudio) Gina20" - select FW_LOADER select SND_PCM help Say 'Y' or 'M' to include support for Echoaudio Gina. @@ -334,7 +330,6 @@ config SND_GINA20 config SND_LAYLA20 tristate "(Echoaudio) Layla20" - select FW_LOADER select SND_RAWMIDI select SND_PCM help @@ -345,7 +340,6 @@ config SND_LAYLA20 config SND_DARLA24 tristate "(Echoaudio) Darla24" - select FW_LOADER select SND_PCM help Say 'Y' or 'M' to include support for Echoaudio Darla24. @@ -355,7 +349,6 @@ config SND_DARLA24 config SND_GINA24 tristate "(Echoaudio) Gina24" - select FW_LOADER select SND_PCM help Say 'Y' or 'M' to include support for Echoaudio Gina24. @@ -365,7 +358,6 @@ config SND_GINA24 config SND_LAYLA24 tristate "(Echoaudio) Layla24" - select FW_LOADER select SND_RAWMIDI select SND_PCM help @@ -376,7 +368,6 @@ config SND_LAYLA24 config SND_MONA tristate "(Echoaudio) Mona" - select FW_LOADER select SND_RAWMIDI select SND_PCM help @@ -387,7 +378,6 @@ config SND_MONA config SND_MIA tristate "(Echoaudio) Mia" - select FW_LOADER select SND_RAWMIDI select SND_PCM help @@ -398,7 +388,6 @@ config SND_MIA config SND_ECHO3G tristate "(Echoaudio) 3G cards" - select FW_LOADER select SND_RAWMIDI select SND_PCM help @@ -409,7 +398,6 @@ config SND_ECHO3G config SND_INDIGO tristate "(Echoaudio) Indigo" - select FW_LOADER select SND_PCM help Say 'Y' or 'M' to include support for Echoaudio Indigo. @@ -419,7 +407,6 @@ config SND_INDIGO config SND_INDIGOIO tristate "(Echoaudio) Indigo IO" - select FW_LOADER select SND_PCM help Say 'Y' or 'M' to include support for Echoaudio Indigo IO. @@ -429,7 +416,6 @@ config SND_INDIGOIO config SND_INDIGODJ tristate "(Echoaudio) Indigo DJ" - select FW_LOADER select SND_PCM help Say 'Y' or 'M' to include support for Echoaudio Indigo DJ. @@ -439,7 +425,6 @@ config SND_INDIGODJ config SND_INDIGOIOX tristate "(Echoaudio) Indigo IOx" - select FW_LOADER select SND_PCM help Say 'Y' or 'M' to include support for Echoaudio Indigo IOx. @@ -449,7 +434,6 @@ config SND_INDIGOIOX config SND_INDIGODJX tristate "(Echoaudio) Indigo DJx" - select FW_LOADER select SND_PCM help Say 'Y' or 'M' to include support for Echoaudio Indigo DJx. @@ -459,7 +443,6 @@ config SND_INDIGODJX config SND_EMU10K1 tristate "Emu10k1 (SB Live!, Audigy, E-mu APS)" - select FW_LOADER select SND_HWDEP select SND_RAWMIDI select SND_AC97_CODEC @@ -581,7 +564,6 @@ config SND_FM801_TEA575X_BOOL config SND_HDSP tristate "RME Hammerfall DSP Audio" - select FW_LOADER select SND_HWDEP select SND_RAWMIDI select SND_PCM @@ -720,7 +702,6 @@ config SND_MAESTRO3_INPUT config SND_MIXART tristate "Digigram miXart" - select FW_LOADER select SND_HWDEP select SND_PCM help @@ -741,7 +722,6 @@ config SND_NM256 config SND_PCXHR tristate "Digigram PCXHR" - select FW_LOADER select SND_PCM select SND_HWDEP help @@ -752,7 +732,6 @@ config SND_PCXHR config SND_RIPTIDE tristate "Conexant Riptide" - select FW_LOADER select SND_OPL3_LIB select SND_MPU401_UART select SND_AC97_CODEC diff --git a/sound/pci/hda/Kconfig b/sound/pci/hda/Kconfig index 117bf5c..36db8e3 100644 --- a/sound/pci/hda/Kconfig +++ b/sound/pci/hda/Kconfig @@ -86,7 +86,6 @@ config SND_HDA_INPUT_BEEP_MODE config SND_HDA_PATCH_LOADER bool "Support initialization patch loading for HD-audio" - select FW_LOADER select SND_HDA_RECONFIG help Say Y here to allow the HD-audio driver to load a pseudo @@ -193,7 +192,6 @@ config SND_HDA_CODEC_CA0132_DSP bool "Support new DSP code for CA0132 codec" depends on SND_HDA_CODEC_CA0132 select SND_HDA_DSP_LOADER - select FW_LOADER help Say Y here to enable the DSP for Creative CA0132 for extended features like equalizer or echo cancellation. diff --git a/sound/soc/sh/Kconfig b/sound/soc/sh/Kconfig index 07114b0..0856d5e 100644 --- a/sound/soc/sh/Kconfig +++ b/sound/soc/sh/Kconfig @@ -32,7 +32,6 @@ config SND_SOC_SH4_SIU select DMA_ENGINE select DMADEVICES select SH_DMAE - select FW_LOADER config SND_SOC_RCAR tristate "R-Car series SRU/SCU/SSIU/SSI support" diff --git a/sound/usb/Kconfig b/sound/usb/Kconfig index a452ad7..50bd312 100644 --- a/sound/usb/Kconfig +++ b/sound/usb/Kconfig @@ -103,7 +103,6 @@ config SND_USB_US122L config SND_USB_6FIRE tristate "TerraTec DMX 6Fire USB" - select FW_LOADER select BITREVERSE select SND_RAWMIDI select SND_PCM -- 2.3.2.209.gd67f9d5.dirty -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/