Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1752370AbbEZMhg (ORCPT ); Tue, 26 May 2015 08:37:36 -0400 Received: from [209.85.192.175] ([209.85.192.175]:34503 "EHLO mail-pd0-f175.google.com" rhost-flags-FAIL-FAIL-OK-FAIL) by vger.kernel.org with ESMTP id S1752244AbbEZMhe (ORCPT ); Tue, 26 May 2015 08:37:34 -0400 From: Sanchayan Maity To: arnd@arndb.de, shawn.guo@linaro.org, kernel@pengutronix.de Cc: stefan@agner.ch, linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, Sanchayan Maity Subject: [PATCH v4 0/2] Implement SoC bus support for Vybrid Date: Tue, 26 May 2015 17:06:45 +0530 Message-Id: X-Mailer: git-send-email 2.4.1 Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 3875 Lines: 120 Hello, This patchset implements SoC bus support for Freescale Vybrid platform, implementing the following https://www.kernel.org/doc/Documentation/ABI/testing/sysfs-devices-soc and is the third revision. Version 3 of the patchset can be found here http://www.spinics.net/lists/arm-kernel/msg420847.html Version 2 of the patchset can be found here http://www.spinics.net/lists/devicetree/msg80654.html Version 1 of the patchset can be found here http://www.spinics.net/lists/devicetree/msg80257.html The RFC version can be found here https://lkml.org/lkml/2015/5/11/13 Changes since v3: - Instead of using the syscon_regmap_lookup_by_compatible function use a phandle in the device tree along with offsets specified in this phandle node and then read the offset along with the device node in the driver for reading from the required region. Changes since v2: - Implement the SoC bus code as a driver in drivers/soc by registering with fsl,mscm-cpucfg as per Arnd's feedback Changes since v1: - Sort the headers in alphabetical order Changes since RFC: - Use a DT entry for the ROM area while specifying it as syscon. One question I had in comparison to the previous implementation is, the previous patch also resulted in exposing the DT devices in the subdirectory soc under soc0/ which happened due to the of_platform_populate call. With the current implementation this does not happen anymore. I am not too thorough on all this, but I guess that of_platform_populate needs to be called early with the right arguments. With the current implementation is it possible to get that soc0/soc directory exposed in any way? Am I missing something trivial in all this? I guess we are OK, even if the above cannot be achived with the current implementation. The main aim of this exercise was to expose the SoC specific attributes. However it did be nice, if it could still be done. Perhaps that part of the implementation can go in later in a separate patch. Arnd are you ok with this implementation? Notes same since v1 and v2: Currently the required information is more or less read across the whole SoC, but I guess we cannot change that since these are the locations with the required information. There seem to be three options for the revision field: - ROM revision (see https://community.freescale.com/docs/DOC-94802) - ANADIG revision (ANADIG_DIGIPROC, as used for the i.MX SoC's) - OCOTP revision Some numbers: Colibri VF61 1.1A (2N02G) - 0x00000013 - 0x00610000 - 0x01000000 - 0x410000c8 Colibri VF61 V1.0B (1N02G) - 0x00000011 - 0x00610000 - 0x01000000 - 0x410000c8 Colibri VF61 V1.0A (which is actually a VF600 SoC, no L2 cache, since that was the only one we could buy back then, 1N02G printed on it) - 0x00000011 - 0x00610000 - 0x01000000 - none... Colibri VF50 V1.0A (1N02G) - 0x00000011 - 0x00610000 - 0x01000000 - none... Vybrid Tower Rev J (1N02G) - 0x00000011 - 0x00610000 - 0x01000000 - 0x410000c8 The ROM revision differs the most, so we would like to go with the revision information from the ROM register 0x80. Sanchayan Maity (2): ARM: dts: vfxxx: Add OCOTP and OCROM nodes soc: Add driver for Freescale Vybrid Platform arch/arm/boot/dts/vfxxx.dtsi | 12 ++++ drivers/soc/Kconfig | 1 + drivers/soc/Makefile | 1 + drivers/soc/fsl/Kconfig | 9 +++ drivers/soc/fsl/Makefile | 1 + drivers/soc/fsl/soc-vf610.c | 168 +++++++++++++++++++++++++++++++++++++++++++ 6 files changed, 192 insertions(+) create mode 100644 drivers/soc/fsl/Kconfig create mode 100644 drivers/soc/fsl/Makefile create mode 100644 drivers/soc/fsl/soc-vf610.c -- 2.4.1 -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/