From: Mathieu Olivari <mathieu@codeaurora.org>
To: robh+dt@kernel.org, pawel.moll@arm.com, mark.rutland@arm.com,
        ijc+devicetree@hellion.org.uk, galak@codeaurora.org,
        mturquette@linaro.org, sboyd@codeaurora.org, peppe.cavallaro@st.com,
        mathieu@codeaurora.org, agross@codeaurora.org, joshc@codeaurora.org,
        architt@codeaurora.org, georgi.djakov@linaro.org, wsa@the-dreams.de,
        rnayak@codeaurora.org, davem@davemloft.net,
        vbridger@opensource.altera.com
Cc: devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
        linux-clk@vger.kernel.org, netdev@vger.kernel.org
Subject: [PATCH 0/5] Add support for QCA IPQ806x Ethernet GMAC controller
Date: Tue, 26 May 2015 12:27:12 -0700
Message-Id: <1432668437-27763-1-git-send-email-mathieu@codeaurora.org>
Sender: linux-kernel-owner@vger.kernel.org
Content-Length: 2276
Lines: 50

This patch set adds support for the integrated Ethernet GMAC controller
on QCA IPQ806x SoC. This controller is based on a Gigabit Synopsys
DesignWare IP, already supported in the stmmac driver located in
drivers/net/ethernet/stmicro/stmmac.

This change is done as a follow-up to the following thread:
*http://www.spinics.net/lists/netdev/msg311265.html
While previous attempt was creating a new driver to drive this controller,
this new post leverages the existing stmmac driver by implementing the
SoC specific glue to it.

Aside from the pure stmmac glue layer, we have a couple of related
patches:
*IPQ806x NSS clock addition is cherry-picked and refreshed from the
 following thread: https://lkml.org/lkml/2014/8/6/390
*phy-handle and fixed-link support are also added in this change set so the
 driver can be fully functional on platforms using device-trees as well as
 ethernet switches.

Mathieu Olivari (4):
  stmmac: add phy-handle support to the platform layer
  stmmac: add fixed-link device-tree support
  stmmac: add ipq806x glue layer
  net: stmmac: ipq806x: document device tree bindings

Stephen Boyd (1):
  clk: qcom: Add support for NSS/GMAC clocks and resets

 .../devicetree/bindings/net/ipq806x-dwmac.txt      |  35 ++
 drivers/clk/qcom/gcc-ipq806x.c                     | 594 ++++++++++++++++++++-
 drivers/net/ethernet/stmicro/stmmac/Kconfig        |  14 +
 drivers/net/ethernet/stmicro/stmmac/Makefile       |   1 +
 .../net/ethernet/stmicro/stmmac/dwmac-ipq806x.c    | 365 +++++++++++++
 drivers/net/ethernet/stmicro/stmmac/stmmac_main.c  |  30 +-
 .../net/ethernet/stmicro/stmmac/stmmac_platform.c  |  18 +-
 include/dt-bindings/clock/qcom,gcc-ipq806x.h       |   2 +
 include/dt-bindings/reset/qcom,gcc-ipq806x.h       |  43 ++
 include/linux/stmmac.h                             |   1 +
 10 files changed, 1089 insertions(+), 14 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/net/ipq806x-dwmac.txt
 create mode 100644 drivers/net/ethernet/stmicro/stmmac/dwmac-ipq806x.c

-- 
2.1.4

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/