Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id ; Sun, 26 Jan 2003 03:18:23 -0500 Received: (majordomo@vger.kernel.org) by vger.kernel.org id ; Sun, 26 Jan 2003 03:18:23 -0500 Received: from web20514.mail.yahoo.com ([216.136.173.246]:37766 "HELO web20514.mail.yahoo.com") by vger.kernel.org with SMTP id ; Sun, 26 Jan 2003 03:18:21 -0500 Message-ID: <20030126082737.13370.qmail@web20514.mail.yahoo.com> Date: Sun, 26 Jan 2003 00:27:37 -0800 (PST) From: Manish Lachwani Subject: Re: FW: PDC202XX DMA loss in 2.4.21-pre3-ac4 To: Andre Hedrick Cc: Bryan Andersen , linux-kernel@vger.kernel.org In-Reply-To: MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org I dont think so. Without SMART data collection being enabled, it wont give out the any SMART data at all. How, did the SMART data show: Vendor Specific SMART Attributes with Thresholds: Revision Number: 16 Attribute Flag Value Worst Threshold Raw Value ( 3)Spin Up Time 0x0027 252 252 063 0 ( 4)Start Stop Count 0x0032 253 253 000 0 ( 5)Reallocated Sector Ct 0x0033 253 253 063 0 ( 6)Read Channel Margin 0x0001 253 253 100 0 ( 7)Seek Error Rate 0x000a 253 252 000 0 ( 8)Seek Time Preformance 0x0027 244 244 187 36736 ( 9)Power On Hours 0x0032 253 253 000 4341 ( 10)Spin Retry Count 0x002b 252 252 223 0 ( 11)Calibration Retry Count 0x002b 252 252 223 0 ( 12)Power Cycle Count 0x0032 253 253 000 43 (192)Power-Off Retract Count 0x0032 253 253 000 0 (193)Load Cycle Count 0x0032 253 253 000 0 (194)Temperature 0x0032 253 253 000 0 (195)Hardware ECC Recovered 0x000a 253 252 000 221 (196)Reallocated Event Count 0x0008 253 253 000 0 (197)Current Pending Sector 0x0008 253 253 000 0 (198)Offline Uncorrectable 0x0008 253 253 000 0 (199)UDMA CRC Error Count 0x0008 199 199 000 0 (200)Unknown Attribute 0x000a 253 252 000 0 (201)Unknown Attribute 0x000a 253 252 000 0 (202)Unknown Attribute 0x000a 253 252 000 0 (203)Unknown Attribute 0x000b 253 252 180 0 (204)Unknown Attribute 0x000a 253 252 000 0 (205)Unknown Attribute 0x000a 253 252 000 0 (207)Unknown Attribute 0x002a 252 252 000 0 (208)Unknown Attribute 0x002a 252 252 000 0 (209)Unknown Attribute 0x0024 253 253 000 0 ( 99)Unknown Attribute 0x0004 253 253 000 0 (100)Unknown Attribute 0x0004 253 253 000 0 (101)Unknown Attribute 0x0004 253 253 000 0 SMART Error Log: SMART Error Logging Version: 1 Error Log Data Structure Pointer: 05 ATA Error Count: 8 Non-Fatal Count: 0 Also, the SMART error log, Error Log Structure 5: DCR FR SC SN CL SH D/H CR Timestamp 08 00 80 aa 4f 8a e0 25 458636 08 d0 01 00 4f c2 e0 b0 459147 08 d1 01 01 4f c2 e0 b0 459147 08 d0 01 00 4f c2 e0 b0 459148 08 d1 01 01 4f c2 e0 b0 459148 00 04 01 0b 4f c2 e0 51 279972 You can retrieve the sector# ... Thanks Manish --- Andre Hedrick wrote: > On Sat, 25 Jan 2003, Manish Lachwani wrote: > > > The "Hardware ECC Recovered" indicates the number > of > > ECC errors corrected in the drive. Do one thing. > Try > > to swap the drive with the drive on another ATA > cable. > > So, swap /dev/hde with /dev/hda (or whatever) > > physically and check if the error follows the > drive or > > the ATA cable. > > > > If it follows the drive, you may have to replace > the > > drive. Additionally, from the SMART error log #5: > > > > 00 04 01 0b 4f c2 e0 51 279972 > > NO! > command aborted > amount to transfer == 1 sector > have to dig through notes to decode > ... > lcyl smart passcode > hcyl smart passcode > primary device > > ready_seek_error > > > It barfed the command ... > > try -e first > > Cheers, > > Andre Hedrick > LAD Storage Consulting Group > > > __________________________________________________ Do you Yahoo!? Yahoo! Mail Plus - Powerful. Affordable. Sign up now. http://mailplus.yahoo.com - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/