Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1759030AbbFBNOn (ORCPT ); Tue, 2 Jun 2015 09:14:43 -0400 Received: from mail-wi0-f175.google.com ([209.85.212.175]:35367 "EHLO mail-wi0-f175.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1756244AbbFBNOi (ORCPT ); Tue, 2 Jun 2015 09:14:38 -0400 From: "Ivan T. Ivanov" To: Peter Chen Cc: Kumar Gala , Rob Herring , Pawel Moll , Mark Rutland , Ian Campbell , Greg Kroah-Hartman , devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, linux-usb@vger.kernel.org, linux-arm-msm@vger.kernel.org Subject: [PATCH v3] usb: chipidea: Use extcon framework for VBUS and ID detect Date: Tue, 2 Jun 2015 16:14:33 +0300 Message-Id: <1433250873-20780-1-git-send-email-ivan.ivanov@linaro.org> X-Mailer: git-send-email 1.9.1 Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 10249 Lines: 368 On recent Qualcomm platforms VBUS and ID lines are not routed to USB PHY LINK controller. Use extcon framework to receive connect and disconnect ID and VBUS notification. Signed-off-by: Ivan T. Ivanov --- Changes sice v2 [1]. * Simulate IRQ on extcon event - used to trigger OTG state machine. I have to admit that I couldn't test complete Chipidea OTG state machine, because my setup is little weird. I am using "qcom,usb-otg-ci" as PHY/OTG provider, "qcom,ehci-host" as host controller driver and "qcom,ci-hdrc" for device role. There could be patch conflict regarding ci-hdrc-qcom.txt, because Rob Herring is consolidating DT binding for all vendors which integrate this device [2] [1] https://lkml.org/lkml/2015/4/15/283 [2] http://www.spinics.net/lists/linux-usb/msg125453.html .../devicetree/bindings/usb/ci-hdrc-qcom.txt | 9 ++ drivers/usb/chipidea/Kconfig | 1 + drivers/usb/chipidea/core.c | 125 +++++++++++++++++++++ drivers/usb/chipidea/otg.c | 55 ++++++++- include/linux/usb/chipidea.h | 24 ++++ 5 files changed, 212 insertions(+), 2 deletions(-) diff --git a/Documentation/devicetree/bindings/usb/ci-hdrc-qcom.txt b/Documentation/devicetree/bindings/usb/ci-hdrc-qcom.txt index f2899b5..c635aca 100644 --- a/Documentation/devicetree/bindings/usb/ci-hdrc-qcom.txt +++ b/Documentation/devicetree/bindings/usb/ci-hdrc-qcom.txt @@ -7,6 +7,14 @@ Required properties: - usb-phy: phandle for the PHY device - dr_mode: Should be "peripheral" +Optional properties: +- extcon: phandles to external connector devices. First phandle + should point to external connector, which provide "USB" + cable events, the second should point to external connector + device, which provide "USB-HOST" cable events. If one of + the external connector devices is not required, empty <0> + phandle should be specified. + Examples: gadget@f9a55000 { compatible = "qcom,ci-hdrc"; @@ -14,4 +22,5 @@ Examples: dr_mode = "peripheral"; interrupts = <0 134 0>; usb-phy = <&usbphy0>; + extcon = <0>, <&usb_id>; }; diff --git a/drivers/usb/chipidea/Kconfig b/drivers/usb/chipidea/Kconfig index 5ce3f1d..5619b8c 100644 --- a/drivers/usb/chipidea/Kconfig +++ b/drivers/usb/chipidea/Kconfig @@ -1,6 +1,7 @@ config USB_CHIPIDEA tristate "ChipIdea Highspeed Dual Role Controller" depends on ((USB_EHCI_HCD && USB_GADGET) || (USB_EHCI_HCD && !USB_GADGET) || (!USB_EHCI_HCD && USB_GADGET)) && HAS_DMA + select EXTCON help Say Y here if your system has a dual role high speed USB controller based on ChipIdea silicon IP. Currently, only the diff --git a/drivers/usb/chipidea/core.c b/drivers/usb/chipidea/core.c index 74fea4f..2ae2c09 100644 --- a/drivers/usb/chipidea/core.c +++ b/drivers/usb/chipidea/core.c @@ -47,6 +47,7 @@ #include #include #include +#include #include #include #include @@ -557,9 +558,47 @@ static irqreturn_t ci_irq(int irq, void *data) return ret; } +static int ci_vbus_notifier(struct notifier_block *nb, unsigned long event, + void *ptr) +{ + struct ci_hdrc_cable *vbus = container_of(nb, struct ci_hdrc_cable, nb); + struct ci_hdrc *ci = vbus->ci; + + if (event) + vbus->state = true; + else + vbus->state = false; + + vbus->changed = true; + + ci_irq(ci->irq, ci); + return NOTIFY_DONE; +} + +static int ci_id_notifier(struct notifier_block *nb, unsigned long event, + void *ptr) +{ + struct ci_hdrc_cable *id = container_of(nb, struct ci_hdrc_cable, nb); + struct ci_hdrc *ci = id->ci; + + if (event) + id->state = false; + else + id->state = true; + + id->changed = true; + + ci_irq(ci->irq, ci); + return NOTIFY_DONE; +} + static int ci_get_platdata(struct device *dev, struct ci_hdrc_platform_data *platdata) { + struct extcon_dev *ext_vbus, *ext_id; + struct ci_hdrc_cable *cable; + int ret; + if (!platdata->phy_mode) platdata->phy_mode = of_usb_get_phy_mode(dev->of_node); @@ -591,9 +630,89 @@ static int ci_get_platdata(struct device *dev, if (of_usb_get_maximum_speed(dev->of_node) == USB_SPEED_FULL) platdata->flags |= CI_HDRC_FORCE_FULLSPEED; + ext_id = ERR_PTR(-ENODEV); + ext_vbus = ERR_PTR(-ENODEV); + if (of_property_read_bool(dev->of_node, "extcon")) { + /* Each one of them is not mandatory */ + ext_vbus = extcon_get_edev_by_phandle(dev, 0); + if (IS_ERR(ext_vbus) && PTR_ERR(ext_vbus) != -ENODEV) + return PTR_ERR(ext_vbus); + + ext_id = extcon_get_edev_by_phandle(dev, 1); + if (IS_ERR(ext_id) && PTR_ERR(ext_id) != -ENODEV) + return PTR_ERR(ext_id); + } + + cable = &platdata->vbus_extcon; + cable->nb.notifier_call = ci_vbus_notifier; + cable->edev = ext_vbus; + + if (!IS_ERR(ext_vbus)) { + ret = extcon_get_cable_state(cable->edev, "USB"); + if (ret) + cable->state = true; + else + cable->state = false; + } + + cable = &platdata->id_extcon; + cable->nb.notifier_call = ci_id_notifier; + cable->edev = ext_id; + + if (!IS_ERR(ext_id)) { + ret = extcon_get_cable_state(cable->edev, "USB-HOST"); + if (ret) + cable->state = false; + else + cable->state = true; + } + return 0; +} + +static int ci_extcon_register(struct ci_hdrc *ci) +{ + struct ci_hdrc_cable *id, *vbus; + int ret; + + id = &ci->platdata->id_extcon; + id->ci = ci; + if (!IS_ERR(id->edev)) { + ret = extcon_register_interest(&id->conn, id->edev->name, + "USB-HOST", &id->nb); + if (ret < 0) { + dev_err(ci->dev, "register ID failed\n"); + return ret; + } + } + + vbus = &ci->platdata->vbus_extcon; + vbus->ci = ci; + if (!IS_ERR(vbus->edev)) { + ret = extcon_register_interest(&vbus->conn, vbus->edev->name, + "USB", &vbus->nb); + if (ret < 0) { + extcon_unregister_interest(&id->conn); + dev_err(ci->dev, "register VBUS failed\n"); + return ret; + } + } + return 0; } +static void ci_extcon_unregister(struct ci_hdrc *ci) +{ + struct ci_hdrc_cable *cable; + + cable = &ci->platdata->id_extcon; + if (!IS_ERR(cable->edev)) + extcon_unregister_interest(&cable->conn); + + cable = &ci->platdata->vbus_extcon; + if (!IS_ERR(cable->edev)) + extcon_unregister_interest(&cable->conn); +} + static DEFINE_IDA(ci_ida); struct platform_device *ci_hdrc_add_device(struct device *dev, @@ -817,6 +936,10 @@ static int ci_hdrc_probe(struct platform_device *pdev) if (ret) goto stop; + ret = ci_extcon_register(ci); + if (ret) + goto stop; + if (ci->supports_runtime_pm) { pm_runtime_set_active(&pdev->dev); pm_runtime_enable(&pdev->dev); @@ -834,6 +957,7 @@ static int ci_hdrc_probe(struct platform_device *pdev) if (!ret) return 0; + ci_extcon_unregister(ci); stop: ci_role_destroy(ci); deinit_phy: @@ -853,6 +977,7 @@ static int ci_hdrc_remove(struct platform_device *pdev) } dbg_remove_files(ci); + ci_extcon_unregister(ci); ci_role_destroy(ci); ci_hdrc_enter_lpm(ci, true); ci_usb_phy_exit(ci); diff --git a/drivers/usb/chipidea/otg.c b/drivers/usb/chipidea/otg.c index ad6c87a..77fe2df 100644 --- a/drivers/usb/chipidea/otg.c +++ b/drivers/usb/chipidea/otg.c @@ -30,7 +30,41 @@ */ u32 hw_read_otgsc(struct ci_hdrc *ci, u32 mask) { - return hw_read(ci, OP_OTGSC, mask); + struct ci_hdrc_cable *cable; + u32 val = hw_read(ci, OP_OTGSC, mask); + + /* + * If using extcon framework for VBUS and/or ID signal + * detection overwrite OTGSC resiter value + */ + cable = &ci->platdata->vbus_extcon; + if (!IS_ERR(cable->edev)) { + if (cable->changed) + val |= OTGSC_BSVIS; + else + val &= ~OTGSC_BSVIS; + + if (cable->state) + val |= OTGSC_BSV; + else + val &= ~OTGSC_BSV; + } + + cable = &ci->platdata->id_extcon; + if (!IS_ERR(cable->edev)) { + if (cable->changed) + val |= OTGSC_IDIS; + else + val &= ~OTGSC_IDIS; + + if (cable->state) + val |= OTGSC_ID; + else + val &= ~OTGSC_ID; + } + + val &= mask; + return val; } /** @@ -40,7 +74,24 @@ u32 hw_read_otgsc(struct ci_hdrc *ci, u32 mask) */ void hw_write_otgsc(struct ci_hdrc *ci, u32 mask, u32 data) { - hw_write(ci, OP_OTGSC, mask | OTGSC_INT_STATUS_BITS, data); + struct ci_hdrc_cable *cable; + + mask |= OTGSC_INT_STATUS_BITS; + + /* clear artificial bits */ + cable = &ci->platdata->vbus_extcon; + if (!IS_ERR(cable->edev)) { + if (data & OTGSC_BSVIS) + cable->changed = false; + } + + cable = &ci->platdata->id_extcon; + if (!IS_ERR(cable->edev)) { + if (data & OTGSC_IDIS) + cable->changed = false; + } + + hw_write(ci, OP_OTGSC, mask, data); } /** diff --git a/include/linux/usb/chipidea.h b/include/linux/usb/chipidea.h index ab94f78..05915cb1 100644 --- a/include/linux/usb/chipidea.h +++ b/include/linux/usb/chipidea.h @@ -5,9 +5,29 @@ #ifndef __LINUX_USB_CHIPIDEA_H #define __LINUX_USB_CHIPIDEA_H +#include #include struct ci_hdrc; + +/** + * struct ci_hdrc_cable - structure for external connector cable state tracking + * @state: current state of the line + * @changed: set to true when extcon event happen + * @edev: device which generate events + * @ci: driver state of the chipidea device + * @nb: hold event notification callback + * @conn: used for notification registration + */ +struct ci_hdrc_cable { + bool state; + bool changed; + struct extcon_dev *edev; + struct ci_hdrc *ci; + struct notifier_block nb; + struct extcon_specific_cable_nb conn; +}; + struct ci_hdrc_platform_data { const char *name; /* offset of the capability registers */ @@ -35,6 +55,10 @@ struct ci_hdrc_platform_data { void (*notify_event) (struct ci_hdrc *ci, unsigned event); struct regulator *reg_vbus; bool tpl_support; + + /* VBUS and ID signal state tracking, using extcon framework */ + struct ci_hdrc_cable vbus_extcon; + struct ci_hdrc_cable id_extcon; }; /* Default offset of capability registers */ -- 1.9.1 -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/