Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1759463AbbFBPNj (ORCPT ); Tue, 2 Jun 2015 11:13:39 -0400 Received: from smtp.codeaurora.org ([198.145.29.96]:48673 "EHLO smtp.codeaurora.org" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1759403AbbFBPNB (ORCPT ); Tue, 2 Jun 2015 11:13:01 -0400 Message-ID: In-Reply-To: <1433228366.6844.18.camel@mm-sol.com> References: <1433190528-30026-1-git-send-email-sviau@codeaurora.org> <1433228366.6844.18.camel@mm-sol.com> Date: Tue, 2 Jun 2015 10:12:59 -0500 Subject: Re: [PATCH v2] drm/msm/hdmi: Use pinctrl in HDMI driver From: =?iso-8859-1?Q?=22St=E9phane_Viau=22?= To: "Ivan T. Ivanov" Cc: "Stephane Viau" , dri-devel@lists.freedesktop.org, linux-arm-msm@vger.kernel.org, linux-kernel@vger.kernel.org, robdclark@gmail.com User-Agent: SquirrelMail/1.4.22-4.el6 MIME-Version: 1.0 Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: 7BIT X-Priority: 3 (Normal) Importance: Normal Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 2712 Lines: 83 Hi Ivan, > > Hi Stephane, > > On Mon, 2015-06-01 at 16:28 -0400, Stephane Viau wrote: >> Some targets (eg: msm8994) use the pinctrl framework to configure >> interface pins. This change adds support for initialization and >> pinctrl active/sleep state control for the HDMI driver. >> >> Signed-off-by: Stephane Viau >> --- >> v2: >> - Add devicetree binding documentation for pinctrl property [Ivan] >> - Use pinctrl framework's PINCTRL_STATE_DEFAULT/SLEEP states [Ivan] >> > > > >> >> static int hdmi_bind(struct device *dev, struct device *master, void >> *data) >> @@ -365,6 +379,7 @@ static int hdmi_bind(struct device *dev, struct >> device *master, void *data) >> #ifdef CONFIG_OF >> struct device_node *of_node = dev->of_node; >> const struct of_device_id *match; >> + struct pinctrl *pinctrl; >> >> match = of_match_node(dt_match, of_node); >> if (match && match->data) { >> @@ -383,6 +398,18 @@ static int hdmi_bind(struct device *dev, struct >> device *master, void *data) >> hdmi_cfg->mux_sel_gpio = get_gpio(dev, of_node, >> "qcom,hdmi-tx-mux-sel"); >> hdmi_cfg->mux_lpm_gpio = get_gpio(dev, of_node, >> "qcom,hdmi-tx-mux-lpm"); >> >> + /* not all targets have pinctrl, do not fail in case of error: >> */ >> + pinctrl = devm_pinctrl_get(dev); > > Probably I have to be more explicit. Why not using pins binding handled in > driver > really_probe()? I have to admit that I am not familiar with DRM subsystem. This would work, indeed, for default/sleep/idle states. I actually had in mind that we'd need to keep track of HDMI pinctrl states because we may need to add a couple more in the near future in order to independently enable/disable certain parts of the HDMI controller (eg: HPD, DDC, CEC..). Each of this HW sub-sections of the controller are driven by a different "pin" in the downstream driver... But since this is nowhere close to being upstream-ed yet, I'll go ahead with your idea of using the common pins binding (v3 to follow). Thanks, Stephane. > > Regards, > Ivan > -- > To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" > in > the body of a message to majordomo@vger.kernel.org > More majordomo info at http://vger.kernel.org/majordomo-info.html > -- Qualcomm Innovation Center, Inc. The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum, a Linux Foundation Collaborative Project -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/