Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1753565AbbFEHhO (ORCPT ); Fri, 5 Jun 2015 03:37:14 -0400 Received: from mail-wg0-f42.google.com ([74.125.82.42]:34480 "EHLO mail-wg0-f42.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1751149AbbFEHhL (ORCPT ); Fri, 5 Jun 2015 03:37:11 -0400 Message-ID: <1433489827.6540.0.camel@linaro.org> Subject: Re: [PATCH v3] usb: chipidea: Use extcon framework for VBUS and ID detect From: "Ivan T. Ivanov" To: Peter Chen Cc: Kumar Gala , Rob Herring , Pawel Moll , Mark Rutland , Ian Campbell , Greg Kroah-Hartman , devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, linux-usb@vger.kernel.org, linux-arm-msm@vger.kernel.org Date: Fri, 05 Jun 2015 10:37:07 +0300 In-Reply-To: <20150605070332.GI15169@shlinux2> References: <1433250873-20780-1-git-send-email-ivan.ivanov@linaro.org> <20150605070332.GI15169@shlinux2> Content-Type: text/plain; charset="UTF-8" X-Mailer: Evolution 3.13.7-fta1.2~trusty Mime-Version: 1.0 Content-Transfer-Encoding: 8bit Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 14824 Lines: 405 On Fri, 2015-06-05 at 15:03 +0800, Peter Chen wrote: > On Tue, Jun 02, 2015 at 04:14:33PM +0300, Ivan T. Ivanov wrote: > > On recent Qualcomm platforms VBUS and ID lines are not routed to > > USB PHY LINK controller. Use extcon framework to receive connect > > and disconnect ID and VBUS notification. > > > > Signed-off-by: Ivan T. Ivanov ivanov@linaro.org> > > --- > > Changes sice v2 [1]. > > > > * Simulate IRQ on extcon event - used to trigger OTG state machine. > > > > No, you may not need to trigger complicate OTG FSM, instead, the > role switch based on ID value is ok. I have tried this also, but I decided that using IRQ simulation will handle all use cases. > > > I have to admit that I couldn't test complete Chipidea OTG state machine, > > because my setup is little weird. I am using "qcom,usb-otg-ci" as PHY/OTG > > provider, "qcom,ehci-host" as host controller driver and "qcom,ci-hdrc" for > > device role. > > > > Then, I am puzzled what kinds of flow you have tested in this patch? > extcon is really needed for chipidea core, but I hope we have tested > patch set based on it. Rob Herring have tested Marvell's host controller > can also use chipidea host driver, I think the same for qualcomm's. > The otg flow at phy-msm-usb.c can be removed and use chipidea's instead, and > only remain phy part at it. I have tried this, but there is too many legacy code which is supposed to handle old platforms and I can not distinguish, which should stay in and what could be taken out. I will take a look again. > > Current role switch and vbus flow are based on otgsc register, you can > improve it by adding extcon support. I am not sure that I get this. Isn't exactly what this patch does? Regards, Ivan > > Peter > > > There could be patch conflict regarding ci-hdrc-qcom.txt, because Rob Herring > > is consolidating DT binding for all vendors which integrate this device [2] > > > > [1] https://lkml.org/lkml/2015/4/15/283 > > [2] http://www.spinics.net/lists/linux-usb/msg125453.html > > > > .../devicetree/bindings/usb/ci-hdrc-qcom.txt | 9 ++ > > drivers/usb/chipidea/Kconfig | 1 + > > drivers/usb/chipidea/core.c | 125 +++++++++++++++++++++ > > drivers/usb/chipidea/otg.c | 55 ++++++++- > > include/linux/usb/chipidea.h | 24 ++++ > > 5 files changed, 212 insertions(+), 2 deletions(-) > > > > diff --git a/Documentation/devicetree/bindings/usb/ci-hdrc-qcom.txt b/Documentation/devicetree/bindings/usb/ci-hdrc-qcom.txt > > index f2899b5..c635aca 100644 > > --- a/Documentation/devicetree/bindings/usb/ci-hdrc-qcom.txt > > +++ b/Documentation/devicetree/bindings/usb/ci-hdrc-qcom.txt > > @@ -7,6 +7,14 @@ Required properties: > > - usb-phy: phandle for the PHY device > > - dr_mode: Should be "peripheral" > > > > +Optional properties: > > +- extcon: phandles to external connector devices. First phandle > > + should point to external connector, which provide "USB" > > + cable events, the second should point to external connector > > + device, which provide "USB-HOST" cable events. If one of > > + the external connector devices is not required, empty <0> > > + phandle should be specified. > > + > > Examples: > >        gadget@f9a55000 { > > compatible = "qcom,ci-hdrc"; > > @@ -14,4 +22,5 @@ Examples: > > dr_mode = "peripheral"; > > interrupts = <0 134 0>; > > usb-phy = <&usbphy0>; > > + extcon = <0>, <&usb_id>; > > }; > > diff --git a/drivers/usb/chipidea/Kconfig b/drivers/usb/chipidea/Kconfig > > index 5ce3f1d..5619b8c 100644 > > --- a/drivers/usb/chipidea/Kconfig > > +++ b/drivers/usb/chipidea/Kconfig > > @@ -1,6 +1,7 @@ > > config USB_CHIPIDEA > > tristate "ChipIdea Highspeed Dual Role Controller" > > depends on ((USB_EHCI_HCD && USB_GADGET) || (USB_EHCI_HCD && !USB_GADGET) || (!USB_EHCI_HCD && USB_GADGET)) && HAS_DMA > > + select EXTCON > > help > > Say Y here if your system has a dual role high speed USB > > controller based on ChipIdea silicon IP. Currently, only the > > diff --git a/drivers/usb/chipidea/core.c b/drivers/usb/chipidea/core.c > > index 74fea4f..2ae2c09 100644 > > --- a/drivers/usb/chipidea/core.c > > +++ b/drivers/usb/chipidea/core.c > > @@ -47,6 +47,7 @@ > > #include > > #include > > #include > > +#include > > #include > > #include > > #include > > @@ -557,9 +558,47 @@ static irqreturn_t ci_irq(int irq, void *data) > > return ret; > > } > > > > +static int ci_vbus_notifier(struct notifier_block *nb, unsigned long event, > > + void *ptr) > > +{ > > + struct ci_hdrc_cable *vbus = container_of(nb, struct ci_hdrc_cable, nb); > > + struct ci_hdrc *ci = vbus->ci; > > + > > + if (event) > > + vbus->state = true; > > + else > > + vbus->state = false; > > + > > + vbus->changed = true; > > + > > + ci_irq(ci->irq, ci); > > + return NOTIFY_DONE; > > +} > > + > > +static int ci_id_notifier(struct notifier_block *nb, unsigned long event, > > + void *ptr) > > +{ > > + struct ci_hdrc_cable *id = container_of(nb, struct ci_hdrc_cable, nb); > > + struct ci_hdrc *ci = id->ci; > > + > > + if (event) > > + id->state = false; > > + else > > + id->state = true; > > + > > + id->changed = true; > > + > > + ci_irq(ci->irq, ci); > > + return NOTIFY_DONE; > > +} > > + > > static int ci_get_platdata(struct device *dev, > > struct ci_hdrc_platform_data *platdata) > > { > > + struct extcon_dev *ext_vbus, *ext_id; > > + struct ci_hdrc_cable *cable; > > + int ret; > > + > > if (!platdata->phy_mode) > > platdata->phy_mode = of_usb_get_phy_mode(dev->of_node); > > > > @@ -591,9 +630,89 @@ static int ci_get_platdata(struct device *dev, > > if (of_usb_get_maximum_speed(dev->of_node) == USB_SPEED_FULL) > > platdata->flags |= CI_HDRC_FORCE_FULLSPEED; > > > > + ext_id = ERR_PTR(-ENODEV); > > + ext_vbus = ERR_PTR(-ENODEV); > > + if (of_property_read_bool(dev->of_node, "extcon")) { > > + /* Each one of them is not mandatory */ > > + ext_vbus = extcon_get_edev_by_phandle(dev, 0); > > + if (IS_ERR(ext_vbus) && PTR_ERR(ext_vbus) != -ENODEV) > > + return PTR_ERR(ext_vbus); > > + > > + ext_id = extcon_get_edev_by_phandle(dev, 1); > > + if (IS_ERR(ext_id) && PTR_ERR(ext_id) != -ENODEV) > > + return PTR_ERR(ext_id); > > + } > > + > > + cable = &platdata->vbus_extcon; > > + cable->nb.notifier_call = ci_vbus_notifier; > > + cable->edev = ext_vbus; > > + > > + if (!IS_ERR(ext_vbus)) { > > + ret = extcon_get_cable_state(cable->edev, "USB"); > > + if (ret) > > + cable->state = true; > > + else > > + cable->state = false; > > + } > > + > > + cable = &platdata->id_extcon; > > + cable->nb.notifier_call = ci_id_notifier; > > + cable->edev = ext_id; > > + > > + if (!IS_ERR(ext_id)) { > > + ret = extcon_get_cable_state(cable->edev, "USB-HOST"); > > + if (ret) > > + cable->state = false; > > + else > > + cable->state = true; > > + } > > + return 0; > > +} > > + > > +static int ci_extcon_register(struct ci_hdrc *ci) > > +{ > > + struct ci_hdrc_cable *id, *vbus; > > + int ret; > > + > > + id = &ci->platdata->id_extcon; > > + id->ci = ci; > > + if (!IS_ERR(id->edev)) { > > + ret = extcon_register_interest(&id->conn, id->edev->name, > > + "USB-HOST", &id->nb); > > + if (ret < 0) { > > + dev_err(ci->dev, "register ID failed\n"); > > + return ret; > > + } > > + } > > + > > + vbus = &ci->platdata->vbus_extcon; > > + vbus->ci = ci; > > + if (!IS_ERR(vbus->edev)) { > > + ret = extcon_register_interest(&vbus->conn, vbus->edev->name, > > + "USB", &vbus->nb); > > + if (ret < 0) { > > + extcon_unregister_interest(&id->conn); > > + dev_err(ci->dev, "register VBUS failed\n"); > > + return ret; > > + } > > + } > > + > > return 0; > > } > > > > +static void ci_extcon_unregister(struct ci_hdrc *ci) > > +{ > > + struct ci_hdrc_cable *cable; > > + > > + cable = &ci->platdata->id_extcon; > > + if (!IS_ERR(cable->edev)) > > + extcon_unregister_interest(&cable->conn); > > + > > + cable = &ci->platdata->vbus_extcon; > > + if (!IS_ERR(cable->edev)) > > + extcon_unregister_interest(&cable->conn); > > +} > > + > > static DEFINE_IDA(ci_ida); > > > > struct platform_device *ci_hdrc_add_device(struct device *dev, > > @@ -817,6 +936,10 @@ static int ci_hdrc_probe(struct platform_device *pdev) > > if (ret) > > goto stop; > > > > + ret = ci_extcon_register(ci); > > + if (ret) > > + goto stop; > > + > > if (ci->supports_runtime_pm) { > > pm_runtime_set_active(&pdev->dev); > > pm_runtime_enable(&pdev->dev); > > @@ -834,6 +957,7 @@ static int ci_hdrc_probe(struct platform_device *pdev) > > if (!ret) > > return 0; > > > > + ci_extcon_unregister(ci); > > stop: > > ci_role_destroy(ci); > > deinit_phy: > > @@ -853,6 +977,7 @@ static int ci_hdrc_remove(struct platform_device *pdev) > > } > > > > dbg_remove_files(ci); > > + ci_extcon_unregister(ci); > > ci_role_destroy(ci); > > ci_hdrc_enter_lpm(ci, true); > > ci_usb_phy_exit(ci); > > diff --git a/drivers/usb/chipidea/otg.c b/drivers/usb/chipidea/otg.c > > index ad6c87a..77fe2df 100644 > > --- a/drivers/usb/chipidea/otg.c > > +++ b/drivers/usb/chipidea/otg.c > > @@ -30,7 +30,41 @@ > > */ > > u32 hw_read_otgsc(struct ci_hdrc *ci, u32 mask) > > { > > - return hw_read(ci, OP_OTGSC, mask); > > + struct ci_hdrc_cable *cable; > > + u32 val = hw_read(ci, OP_OTGSC, mask); > > + > > + /* > > + * If using extcon framework for VBUS and/or ID signal > > + * detection overwrite OTGSC resiter value > > + */ > > + cable = &ci->platdata->vbus_extcon; > > + if (!IS_ERR(cable->edev)) { > > + if (cable->changed) > > + val |= OTGSC_BSVIS; > > + else > > + val &= ~OTGSC_BSVIS; > > + > > + if (cable->state) > > + val |= OTGSC_BSV; > > + else > > + val &= ~OTGSC_BSV; > > + } > > + > > + cable = &ci->platdata->id_extcon; > > + if (!IS_ERR(cable->edev)) { > > + if (cable->changed) > > + val |= OTGSC_IDIS; > > + else > > + val &= ~OTGSC_IDIS; > > + > > + if (cable->state) > > + val |= OTGSC_ID; > > + else > > + val &= ~OTGSC_ID; > > + } > > + > > + val &= mask; > > + return val; > > } > > > > /** > > @@ -40,7 +74,24 @@ u32 hw_read_otgsc(struct ci_hdrc *ci, u32 mask) > > */ > > void hw_write_otgsc(struct ci_hdrc *ci, u32 mask, u32 data) > > { > > - hw_write(ci, OP_OTGSC, mask | OTGSC_INT_STATUS_BITS, data); > > + struct ci_hdrc_cable *cable; > > + > > + mask |= OTGSC_INT_STATUS_BITS; > > + > > + /* clear artificial bits */ > > + cable = &ci->platdata->vbus_extcon; > > + if (!IS_ERR(cable->edev)) { > > + if (data & OTGSC_BSVIS) > > + cable->changed = false; > > + } > > + > > + cable = &ci->platdata->id_extcon; > > + if (!IS_ERR(cable->edev)) { > > + if (data & OTGSC_IDIS) > > + cable->changed = false; > > + } > > + > > + hw_write(ci, OP_OTGSC, mask, data); > > } > > > > /** > > diff --git a/include/linux/usb/chipidea.h b/include/linux/usb/chipidea.h > > index ab94f78..05915cb1 100644 > > --- a/include/linux/usb/chipidea.h > > +++ b/include/linux/usb/chipidea.h > > @@ -5,9 +5,29 @@ > > #ifndef __LINUX_USB_CHIPIDEA_H > > #define __LINUX_USB_CHIPIDEA_H > > > > +#include > > #include > > > > struct ci_hdrc; > > + > > +/** > > + * struct ci_hdrc_cable - structure for external connector cable state tracking > > + * @state: current state of the line > > + * @changed: set to true when extcon event happen > > + * @edev: device which generate events > > + * @ci: driver state of the chipidea device > > + * @nb: hold event notification callback > > + * @conn: used for notification registration > > + */ > > +struct ci_hdrc_cable { > > + bool state; > > + bool changed; > > + struct extcon_dev*edev; > > + struct ci_hdrc*ci; > > + struct notifier_blocknb; > > + struct extcon_specific_cable_nb conn; > > +}; > > + > > struct ci_hdrc_platform_data { > > const char*name; > > /* offset of the capability registers */ > > @@ -35,6 +55,10 @@ struct ci_hdrc_platform_data { > > void (*notify_event) (struct ci_hdrc *ci, unsigned event); > > struct regulator*reg_vbus; > > bool tpl_support; > > + > > + /* VBUS and ID signal state tracking, using extcon framework */ > > + struct ci_hdrc_cablevbus_extcon; > > + struct ci_hdrc_cableid_extcon; > > }; > > > > /* Default offset of capability registers */ > > -- > > 1.9.1 > > > > -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/