Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S932611AbbFELB6 (ORCPT ); Fri, 5 Jun 2015 07:01:58 -0400 Received: from mga14.intel.com ([192.55.52.115]:59891 "EHLO mga14.intel.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1754424AbbFELBl (ORCPT ); Fri, 5 Jun 2015 07:01:41 -0400 X-ExtLoop1: 1 X-IronPort-AV: E=Sophos;i="5.13,558,1427785200"; d="scan'208";a="721284767" From: Daniel Baluta To: jic23@kernel.org, pmeerw@pmeerw.net Cc: daniel.baluta@intel.com, knaack.h@gmx.de, lars@metafoo.de, linux-kernel@vger.kernel.org, linux-iio@vger.kernel.org Subject: [PATCH v2 6/6] iio: magnetometer: mmc35240: Add compensation for raw values Date: Fri, 5 Jun 2015 14:03:15 +0300 Message-Id: <1433502195-30296-7-git-send-email-daniel.baluta@intel.com> X-Mailer: git-send-email 1.9.1 In-Reply-To: <1433502195-30296-1-git-send-email-daniel.baluta@intel.com> References: <1433502195-30296-1-git-send-email-daniel.baluta@intel.com> Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 3799 Lines: 118 This patch adds compensation formula to raw readings, borrowed from Memsic's input driver. Signed-off-by: Daniel Baluta --- drivers/iio/magnetometer/mmc35240.c | 62 ++++++++++++++++++++++++++++++++++--- 1 file changed, 58 insertions(+), 4 deletions(-) diff --git a/drivers/iio/magnetometer/mmc35240.c b/drivers/iio/magnetometer/mmc35240.c index 73fa111..7540bbf 100644 --- a/drivers/iio/magnetometer/mmc35240.c +++ b/drivers/iio/magnetometer/mmc35240.c @@ -58,6 +58,31 @@ #define MMC35240_WAIT_CHARGE_PUMP 50000 /* us */ #define MMC53240_WAIT_SET_RESET 1000 /* us */ +/* + * Memsic OTP process code piece is put here for reference: + * + * #define OTP_CONVERT(REG) ((float)((REG) >=32 ? (32 - (REG)) : (REG)) * 0.006 + * 1) For X axis, the COEFFICIENT is always 1. + * 2) For Y axis, the COEFFICIENT is as below: + * f_OTP_matrix[4] = OTP_CONVERT(((reg_data[1] & 0x03) << 4) | + * (reg_data[2] >> 4)) + 1.0; + * 3) For Z axis, the COEFFICIENT is as below: + * f_OTP_matrix[8] = (OTP_CONVERT(reg_data[3] & 0x3f) + 1) * 1.35; + * We implemented the OTP logic into driver. + */ + +/* scale = 1000 here for Y otp */ +#define MMC35240_OTP_CONVERT_Y(REG) (((REG) >= 32 ? (32 - (REG)) : (REG)) * 6) + +/* 0.6 * 1.35 = 0.81, scale 10000 for Z otp */ +#define MMC35240_OTP_CONVERT_Z(REG) (((REG) >= 32 ? (32 - (REG)) : (REG)) * 81) + +#define MMC35240_X_COEFF(x) (x) +#define MMC35240_Y_COEFF(y) (y + 1000) +#define MMC35240_Z_COEFF(z) (z + 13500) + +#define MMC35240_OTP_START_ADDR 0x1B + enum mmc35240_resolution { MMC35240_16_BITS_SLOW = 0, /* 100 Hz */ MMC35240_16_BITS_FAST, /* 200 Hz */ @@ -102,6 +127,10 @@ struct mmc35240_data { struct mutex mutex; struct regmap *regmap; enum mmc35240_resolution res; + + /* OTP compensation */ + int axis_coef[3]; + int axis_scale[3]; }; static const int mmc35240_samp_freq[] = {100, 200, 333, 666}; @@ -172,8 +201,9 @@ static int mmc35240_hw_set(struct mmc35240_data *data, bool set) static int mmc35240_init(struct mmc35240_data *data) { - int ret; + int ret, y_convert, z_convert; unsigned int reg_id; + u8 otp_data[6]; ret = regmap_read(data->regmap, MMC35240_REG_ID, ®_id); if (ret < 0) { @@ -197,9 +227,30 @@ static int mmc35240_init(struct mmc35240_data *data) return ret; /* set default sampling frequency */ - return regmap_update_bits(data->regmap, MMC35240_REG_CTRL1, - MMC35240_CTRL1_BW_MASK, - data->res << MMC35240_CTRL1_BW_SHIFT); + ret = regmap_update_bits(data->regmap, MMC35240_REG_CTRL1, + MMC35240_CTRL1_BW_MASK, + data->res << MMC35240_CTRL1_BW_SHIFT); + if (ret < 0) + return ret; + + ret = regmap_bulk_read(data->regmap, MMC35240_OTP_START_ADDR, + (u8 *)otp_data, sizeof(otp_data)); + if (ret < 0) + return ret; + + y_convert = MMC35240_OTP_CONVERT_Y(((otp_data[1] & 0x03) << 4) | + (otp_data[2] >> 4)); + z_convert = MMC35240_OTP_CONVERT_Z(otp_data[3] & 0x3f); + + data->axis_coef[0] = MMC35240_X_COEFF(1); + data->axis_coef[1] = MMC35240_Y_COEFF(y_convert); + data->axis_coef[2] = MMC35240_Z_COEFF(z_convert); + + data->axis_scale[0] = 1; + data->axis_scale[1] = 1000; + data->axis_scale[2] = 10000; + + return 0; } static int mmc35240_take_measurement(struct mmc35240_data *data) @@ -286,6 +337,9 @@ static int mmc35240_raw_to_mgauss(struct mmc35240_data *data, int index, default: return -EINVAL; } + /* apply OTP compensation */ + *val = (*val) * data->axis_coef[index] / data->axis_scale[index]; + return 0; } -- 1.9.1 -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/