Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1752948AbbFHLLA (ORCPT ); Mon, 8 Jun 2015 07:11:00 -0400 Received: from mailgw02.mediatek.com ([210.61.82.184]:58698 "EHLO mailgw02.mediatek.com" rhost-flags-OK-FAIL-OK-FAIL) by vger.kernel.org with ESMTP id S1752862AbbFHLKx (ORCPT ); Mon, 8 Jun 2015 07:10:53 -0400 X-Listener-Flag: 11101 Message-ID: <1433761837.31929.3.camel@mtksdaap41> Subject: Re: [PATCH v2 2/2] arm64: dts: mt8173: Add I2C device node From: Eddie Huang To: Sascha Hauer CC: Matthias Brugger , , , , Date: Mon, 8 Jun 2015 19:10:37 +0800 In-Reply-To: <20150608072725.GJ6325@pengutronix.de> References: <1433164107-26568-1-git-send-email-eddie.huang@mediatek.com> <1433164107-26568-3-git-send-email-eddie.huang@mediatek.com> <20150608072725.GJ6325@pengutronix.de> Content-Type: text/plain; charset="UTF-8" X-Mailer: Evolution 3.2.3-0ubuntu6 Content-Transfer-Encoding: 7bit MIME-Version: 1.0 X-MTK: N Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 1781 Lines: 49 Hi Sascha, On Mon, 2015-06-08 at 09:27 +0200, Sascha Hauer wrote: > Hi Eddie, > > On Mon, Jun 01, 2015 at 09:08:27PM +0800, Eddie Huang wrote: > > Add MT8173 I2C device nodes, include I2C controllers and pins. > > MT8173 has six I2C controllers, from i2c0 to i2c6, exclude i2c5. > > The 6th I2C controller register base doesn't next to 5th I2C, > > and there is a hardware between 5th and 6th I2C controller. So > > SoC designer name 6th controller as "i2c6", not "i2c5". > > > > Signed-off-by: Eddie Huang > > --- > > arch/arm64/boot/dts/mediatek/mt8173.dtsi | 119 +++++++++++++++++++++++++++++++ > > 1 file changed, 119 insertions(+) > > > > diff --git a/arch/arm64/boot/dts/mediatek/mt8173.dtsi b/arch/arm64/boot/dts/mediatek/mt8173.dtsi > > index b52ec43..7003ed2 100644 > > --- a/arch/arm64/boot/dts/mediatek/mt8173.dtsi > > +++ b/arch/arm64/boot/dts/mediatek/mt8173.dtsi > > @@ -158,6 +158,53 @@ > > interrupts = , > > , > > ; > > + i2c0_pins_a: i2c0@0 { > > + pins1 { > > + pinmux = , > > + ; > > + bias-disable; > > + }; > > + }; > > The pinmux nodes should be in the board dts, not in the SoC dtsi. > These pins are fixed, and all boards using MT8173 SoC I2C controller should use these pins. To reduce spread these to many board dts files, so I put i2c pins in SoC dtsi. Eddie Thanks -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/