Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S966621AbbFJQH2 (ORCPT ); Wed, 10 Jun 2015 12:07:28 -0400 Received: from ip4-83-240-67-251.cust.nbox.cz ([83.240.67.251]:36017 "EHLO ip4-83-240-18-248.cust.nbox.cz" rhost-flags-OK-OK-OK-FAIL) by vger.kernel.org with ESMTP id S933794AbbFJP1m (ORCPT ); Wed, 10 Jun 2015 11:27:42 -0400 From: Jiri Slaby To: stable@vger.kernel.org Cc: linux-kernel@vger.kernel.org, Tomas Henzl , Christoph Hellwig , Jiri Slaby Subject: [PATCH 3.12 006/111] hpsa: refine the pci enable/disable handling Date: Wed, 10 Jun 2015 17:25:55 +0200 Message-Id: X-Mailer: git-send-email 2.4.2 In-Reply-To: <93091169a673f49c2574cddf1ef858cf0704f646.1433943052.git.jslaby@suse.cz> References: <93091169a673f49c2574cddf1ef858cf0704f646.1433943052.git.jslaby@suse.cz> In-Reply-To: References: Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 4169 Lines: 124 From: Tomas Henzl 3.12-stable review patch. If anyone has any objections, please let me know. =============== commit 132aa220b45d60e9b20def1e9d8be9422eed9616 upstream. When a second(kdump) kernel starts and the hard reset method is used the driver calls pci_disable_device without previously enabling it, so the kernel shows a warning - [ 16.876248] WARNING: at drivers/pci/pci.c:1431 pci_disable_device+0x84/0x90() [ 16.882686] Device hpsa disabling already-disabled device ... This patch fixes it, in addition to this I tried to balance also some other pairs of enable/disable device in the driver. Unfortunately I wasn't able to verify the functionality for the case of a sw reset, because of a lack of proper hw. Signed-off-by: Tomas Henzl Reviewed-by: Stephen M. Cameron Signed-off-by: Christoph Hellwig Signed-off-by: Jiri Slaby --- drivers/scsi/hpsa.c | 42 ++++++++++++++++++++++++++++-------------- 1 file changed, 28 insertions(+), 14 deletions(-) diff --git a/drivers/scsi/hpsa.c b/drivers/scsi/hpsa.c index d535e7504ea0..3639f05fafd0 100644 --- a/drivers/scsi/hpsa.c +++ b/drivers/scsi/hpsa.c @@ -3920,10 +3920,6 @@ static int hpsa_kdump_hard_reset_controller(struct pci_dev *pdev) /* Save the PCI command register */ pci_read_config_word(pdev, 4, &command_register); - /* Turn the board off. This is so that later pci_restore_state() - * won't turn the board on before the rest of config space is ready. - */ - pci_disable_device(pdev); pci_save_state(pdev); /* find the first memory BAR, so we can find the cfg table */ @@ -3971,11 +3967,6 @@ static int hpsa_kdump_hard_reset_controller(struct pci_dev *pdev) goto unmap_cfgtable; pci_restore_state(pdev); - rc = pci_enable_device(pdev); - if (rc) { - dev_warn(&pdev->dev, "failed to enable device.\n"); - goto unmap_cfgtable; - } pci_write_config_word(pdev, 4, command_register); /* Some devices (notably the HP Smart Array 5i Controller) @@ -4470,6 +4461,23 @@ static int hpsa_init_reset_devices(struct pci_dev *pdev) if (!reset_devices) return 0; + /* kdump kernel is loading, we don't know in which state is + * the pci interface. The dev->enable_cnt is equal zero + * so we call enable+disable, wait a while and switch it on. + */ + rc = pci_enable_device(pdev); + if (rc) { + dev_warn(&pdev->dev, "Failed to enable PCI device\n"); + return -ENODEV; + } + pci_disable_device(pdev); + msleep(260); /* a randomly chosen number */ + rc = pci_enable_device(pdev); + if (rc) { + dev_warn(&pdev->dev, "failed to enable device.\n"); + return -ENODEV; + } + /* Reset the controller with a PCI power-cycle or via doorbell */ rc = hpsa_kdump_hard_reset_controller(pdev); @@ -4478,10 +4486,11 @@ static int hpsa_init_reset_devices(struct pci_dev *pdev) * "performant mode". Or, it might be 640x, which can't reset * due to concerns about shared bbwc between 6402/6404 pair. */ - if (rc == -ENOTSUPP) - return rc; /* just try to do the kdump anyhow. */ - if (rc) - return -ENODEV; + if (rc) { + if (rc != -ENOTSUPP) /* just try to do the kdump anyhow. */ + rc = -ENODEV; + goto out_disable; + } /* Now try to get the controller to respond to a no-op */ dev_warn(&pdev->dev, "Waiting for controller to respond to no-op\n"); @@ -4492,7 +4501,11 @@ static int hpsa_init_reset_devices(struct pci_dev *pdev) dev_warn(&pdev->dev, "no-op failed%s\n", (i < 11 ? "; re-trying" : "")); } - return 0; + +out_disable: + + pci_disable_device(pdev); + return rc; } static int hpsa_allocate_cmd_pool(struct ctlr_info *h) @@ -4635,6 +4648,7 @@ static void hpsa_undo_allocations_after_kdump_soft_reset(struct ctlr_info *h) iounmap(h->transtable); if (h->cfgtable) iounmap(h->cfgtable); + pci_disable_device(h->pdev); pci_release_regions(h->pdev); kfree(h); } -- 2.4.2 -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/