Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1754690AbbFQKqf (ORCPT ); Wed, 17 Jun 2015 06:46:35 -0400 Received: from mailapp01.imgtec.com ([195.59.15.196]:6228 "EHLO mailapp01.imgtec.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1754418AbbFQKqY (ORCPT ); Wed, 17 Jun 2015 06:46:24 -0400 From: Sifan Naeem To: CC: , , , Sifan Naeem Subject: [PATCH v3] spi: img-spfi: Same Edge bit set to double supported transfer speed Date: Wed, 17 Jun 2015 11:48:05 +0100 Message-ID: <1434538085-8584-1-git-send-email-sifan.naeem@imgtec.com> X-Mailer: git-send-email 1.7.9.5 MIME-Version: 1.0 Content-Type: text/plain X-Originating-IP: [192.168.167.63] Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 1482 Lines: 41 Same edge bit set in SPFI Control register to double the supported spfi clock speed. Setting this bit increases the supported spfi frequency from 1/8 to 1/4 of the core clock frequency. Without this bit set the maximum speed supported was 25MHz on Pistachio. Signed-off-by: Sifan Naeem --- changes from v2: Gerrit Change-Id removed from commit message drivers/spi/spi-img-spfi.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/spi/spi-img-spfi.c b/drivers/spi/spi-img-spfi.c index 788e2b1..acce90a 100644 --- a/drivers/spi/spi-img-spfi.c +++ b/drivers/spi/spi-img-spfi.c @@ -40,6 +40,7 @@ #define SPFI_CONTROL_SOFT_RESET BIT(11) #define SPFI_CONTROL_SEND_DMA BIT(10) #define SPFI_CONTROL_GET_DMA BIT(9) +#define SPFI_CONTROL_SE BIT(8) #define SPFI_CONTROL_TMODE_SHIFT 5 #define SPFI_CONTROL_TMODE_MASK 0x7 #define SPFI_CONTROL_TMODE_SINGLE 0 @@ -491,6 +492,7 @@ static void img_spfi_config(struct spi_master *master, struct spi_device *spi, else if (xfer->tx_nbits == SPI_NBITS_QUAD && xfer->rx_nbits == SPI_NBITS_QUAD) val |= SPFI_CONTROL_TMODE_QUAD << SPFI_CONTROL_TMODE_SHIFT; + val |= SPFI_CONTROL_SE; spfi_writel(spfi, val, SPFI_CONTROL); } -- 1.7.9.5 -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/