Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1753371AbbFSCg4 (ORCPT ); Thu, 18 Jun 2015 22:36:56 -0400 Received: from mail-ig0-f175.google.com ([209.85.213.175]:33137 "EHLO mail-ig0-f175.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1752270AbbFSCgr (ORCPT ); Thu, 18 Jun 2015 22:36:47 -0400 MIME-Version: 1.0 Reply-To: cw00.choi@samsung.com In-Reply-To: <1434638631-16451-4-git-send-email-ckeepax@opensource.wolfsonmicro.com> References: <1434638631-16451-1-git-send-email-ckeepax@opensource.wolfsonmicro.com> <1434638631-16451-4-git-send-email-ckeepax@opensource.wolfsonmicro.com> Date: Fri, 19 Jun 2015 11:36:47 +0900 Message-ID: Subject: Re: [PATCH v2 3/5] extcon: arizona: Convert to gpiod From: Chanwoo Choi To: Charles Keepax Cc: Lee Jones , "myungjoo.ham@samsung.com" , Samuel Ortiz , devicetree , linux-kernel , patches@opensource.wolfsonmicro.com Content-Type: text/plain; charset=UTF-8 Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 5810 Lines: 147 Hi Charles, On Thu, Jun 18, 2015 at 11:43 PM, Charles Keepax wrote: > Convert to using the newer gpiod interface for the micd_pol_gpio. > Although we still carry support for the old gpio interface from pdata. > > Signed-off-by: Charles Keepax > --- > drivers/extcon/extcon-arizona.c | 36 +++++++++++++++++++++++++++++++----- > 1 files changed, 31 insertions(+), 5 deletions(-) > > diff --git a/drivers/extcon/extcon-arizona.c b/drivers/extcon/extcon-arizona.c > index 5bf1b19..71d60ba 100644 > --- a/drivers/extcon/extcon-arizona.c > +++ b/drivers/extcon/extcon-arizona.c > @@ -20,6 +20,7 @@ > #include > #include > #include > +#include > #include > #include > #include > @@ -95,6 +96,8 @@ struct arizona_extcon_info { > int hpdet_ip_version; > > struct extcon_dev *edev; > + > + struct gpio_desc *micd_pol_gpio; > }; > > static const struct arizona_micd_config micd_default_modes[] = { > @@ -205,6 +208,10 @@ static void arizona_extcon_set_mode(struct arizona_extcon_info *info, int mode) > if (arizona->pdata.micd_pol_gpio > 0) > gpio_set_value_cansleep(arizona->pdata.micd_pol_gpio, > info->micd_modes[mode].gpio); > + else if (info->micd_pol_gpio) > + gpiod_set_value_cansleep(info->micd_pol_gpio, > + info->micd_modes[mode].gpio); gpiod_set_value_cansleep() check always the whether info->micd_pol_gpiod is NULl or not. So, I think that you can modify it as following without additional if statemet. e.g., else gpiod_set_value_cansleep(info->micd_pol_gpio, > + > regmap_update_bits(arizona->regmap, ARIZONA_MIC_DETECT_1, > ARIZONA_MICD_BIAS_SRC_MASK, > info->micd_modes[mode].bias << > @@ -1271,6 +1278,22 @@ static int arizona_extcon_probe(struct platform_device *pdev) > arizona->pdata.micd_pol_gpio, ret); > goto err_register; > } > + } else { > + if (info->micd_modes[0].gpio) I'd like you to define the constant varaible for index (0) on separate patch. > + mode = GPIOD_OUT_HIGH; > + else > + mode = GPIOD_OUT_LOW; > + > + info->micd_pol_gpio = gpiod_get_optional(arizona->dev, > + "wlf,micd-pol", > + GPIOD_OUT_LOW); You can use the devm_gpiod_get_optional() to manage the system resource automatically. > + if (IS_ERR(info->micd_pol_gpio)) { > + ret = PTR_ERR(info->micd_pol_gpio); > + dev_err(arizona->dev, > + "Failed to get microphone polarity GPIO: %d\n", > + ret); > + goto err_register; > + } > } > > if (arizona->pdata.hpdet_id_gpio > 0) { > @@ -1281,7 +1304,7 @@ static int arizona_extcon_probe(struct platform_device *pdev) > if (ret != 0) { > dev_err(arizona->dev, "Failed to request GPIO%d: %d\n", > arizona->pdata.hpdet_id_gpio, ret); > - goto err_register; > + goto err_gpio; > } > } > > @@ -1325,7 +1348,7 @@ static int arizona_extcon_probe(struct platform_device *pdev) > dev_err(arizona->dev, > "MICD ranges must be sorted\n"); > ret = -EINVAL; > - goto err_input; > + goto err_gpio; > } > } > } > @@ -1344,7 +1367,7 @@ static int arizona_extcon_probe(struct platform_device *pdev) > dev_err(arizona->dev, "Unsupported MICD level %d\n", > info->micd_ranges[i].max); > ret = -EINVAL; > - goto err_input; > + goto err_gpio; > } > > dev_dbg(arizona->dev, "%d ohms for MICD threshold %d\n", > @@ -1417,7 +1440,7 @@ static int arizona_extcon_probe(struct platform_device *pdev) > if (ret != 0) { > dev_err(&pdev->dev, "Failed to get JACKDET rise IRQ: %d\n", > ret); > - goto err_input; > + goto err_gpio; > } > > ret = arizona_set_irq_wake(arizona, jack_irq_rise, 1); > @@ -1488,7 +1511,8 @@ err_rise_wake: > arizona_set_irq_wake(arizona, jack_irq_rise, 0); > err_rise: > arizona_free_irq(arizona, jack_irq_rise, info); > -err_input: > +err_gpio: > + gpiod_put(info->micd_pol_gpio); > err_register: > pm_runtime_disable(&pdev->dev); > return ret; > @@ -1500,6 +1524,8 @@ static int arizona_extcon_remove(struct platform_device *pdev) > struct arizona *arizona = info->arizona; > int jack_irq_rise, jack_irq_fall; > > + gpiod_put(info->micd_pol_gpio); > + > pm_runtime_disable(&pdev->dev); > > regmap_update_bits(arizona->regmap, Thanks, Chanwoo Choi -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/