Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1754797AbbFSK72 (ORCPT ); Fri, 19 Jun 2015 06:59:28 -0400 Received: from mail-wi0-f171.google.com ([209.85.212.171]:38032 "EHLO mail-wi0-f171.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1750983AbbFSK7T (ORCPT ); Fri, 19 Jun 2015 06:59:19 -0400 Message-ID: <5583F602.9040706@linaro.org> Date: Fri, 19 Jun 2015 11:59:14 +0100 From: Srinivas Kandagatla User-Agent: Mozilla/5.0 (X11; Linux x86_64; rv:31.0) Gecko/20100101 Thunderbird/31.4.0 MIME-Version: 1.0 To: maitysanchayan@gmail.com CC: linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org, arnd@arndb.de, Greg Kroah-Hartman , s.hauer@pengutronix.de, sboyd@codeaurora.org, linux-kernel@vger.kernel.org, pantelis.antoniou@konsulko.com, Rob Herring , Mark Brown , Kumar Gala , mporter@konsulko.com, Maxime Ripard , linux-api@vger.kernel.org, linux-arm-msm@vger.kernel.org, Stefan Agner Subject: Re: [PATCH v5 06/11] nvmem: Add bindings for simple nvmem framework References: <1432226535-8640-1-git-send-email-srinivas.kandagatla@linaro.org> <1432226652-8947-1-git-send-email-srinivas.kandagatla@linaro.org> <20150619103647.GA3913@Sanchayan-Arch> In-Reply-To: <20150619103647.GA3913@Sanchayan-Arch> Content-Type: text/plain; charset=utf-8; format=flowed Content-Transfer-Encoding: 7bit Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 5677 Lines: 182 On 19/06/15 11:36, maitysanchayan@gmail.com wrote: > Hello Srinivas, > > On 15-05-21 17:44:12, Srinivas Kandagatla wrote: >> This patch adds bindings for simple nvmem framework which allows nvmem >> consumers to talk to nvmem providers to get access to nvmem cell data. >> >> Signed-off-by: Maxime Ripard >> [Maxime Ripard: intial version of eeprom framework] >> Signed-off-by: Srinivas Kandagatla >> --- >> Documentation/devicetree/bindings/nvmem/nvmem.txt | 84 +++++++++++++++++++++++ >> 1 file changed, 84 insertions(+) >> create mode 100644 Documentation/devicetree/bindings/nvmem/nvmem.txt >> >> diff --git a/Documentation/devicetree/bindings/nvmem/nvmem.txt b/Documentation/devicetree/bindings/nvmem/nvmem.txt >> new file mode 100644 >> index 0000000..ecea654 >> --- /dev/null >> +++ b/Documentation/devicetree/bindings/nvmem/nvmem.txt >> @@ -0,0 +1,84 @@ >> += NVMEM Data Device Tree Bindings = >> + >> +This binding is intended to represent the location of hardware >> +configuration data stored in NVMEMs. >> + >> +On a significant proportion of boards, the manufacturer has stored >> +some data on NVMEM, for the OS to be able to retrieve these information >> +and act upon it. Obviously, the OS has to know about where to retrieve >> +these data from, and where they are stored on the storage device. >> + >> +This document is here to document this. >> + >> += Data providers = >> +Contains bindings specific to provider drivers and data cells as children >> +to this node. >> + >> +Optional properties: >> + read-only: Mark the provider as read only. >> + >> += Data cells = >> +These are the child nodes of the provider which contain data cell >> +information like offset and size in nvmem provider. >> + >> +Required properties: >> +reg: specifies the offset in byte within that storage device, start bit >> + in the byte and the length in bits of the data we care about. >> + There could be more then one offset-length pairs in this property. >> + >> +Optional properties: >> + >> +bit-offset: specifies the offset in bit within the address range specified >> + by reg property. Can take values from 0-7. >> +nbits: specifies number of bits this cell occupies starting from bit-offset. >> + >> +For example: >> + >> + /* Provider */ >> + qfprom: qfprom@00700000 { >> + ... >> + >> + /* Data cells */ >> + tsens_calibration: calib@404 { >> + reg = <0x404 0x10>; >> + }; >> + >> + tsens_calibration_bckp: calib_bckp@504 { >> + reg = <0x504 0x11>; >> + bit-offset = 6; >> + nbits = 128; >> + }; >> + >> + pvs_version: pvs-version@6 { >> + reg = <0x6 0x2> >> + bit-offset = 7; >> + nbits = 2; >> + }; >> + >> + speed_bin: speed-bin@c{ >> + reg = <0xc 0x1>; >> + bit-offset = 2; >> + nbits = 3; >> + >> + }; >> + ... >> + }; > > We have a need of exposing information like SoC ID, revision and such > which is what this nvmem framework proposes to be suitable for. Till > now I was trying a different approach for the same [1]. > > The On Chip One Time Programmable block on the Vybrid can be handled > nicely with this nvmem framework however I had a few queries with > regards to the framework after trying it on a Vybrid VF61 SoC. > > 1. From what I understand, getting the information in hex is the only > way possible as of now? Would it be possible to expose the information nvmem file in the /sys/ is just a binary file. hexdump is one of the ways to dump the data, the user can read the binary file and interpret the data in the way he wants it. > as strings from different paths under /sys/class/nvmem/*/nvmem/? > > For example, if I have a sub node as below > > ocotp: ocotp@400a5000 { > compatible = "fsl,vf610-ocotp"; > reg = <0x400a5000 0x1000>; > > ocotp_cfg0: cfg0@410 { > reg = <0x410 0x1>; > }; > > ocotp_cfg1: cfg1@420 { > reg = <0x420 0x1>; > }; > }; > > The values from the above register locations represented by the two > sub nodes above can perhaps be exposed as strings? Even if they are > not exposed as strings, making them available in separate paths, is > that something which can be done? So depending on the sub node as > above, /sys/class/nvmem/ocotp0/nvmem/cfg0/ would give values from > the registers specified. I was thinking of add similar support to show cells in /sys/class/nvmem/*/cells/cfg0 in future once the framework is merged. For now I want to keep it simple. This would be binary content again. you can dump it using strings any program which wants to interpret it differently. > > Basically the output of /sys/class/nvmem/*/nvmem being restricted > to only the subnodes specified is what I was hoping to get along > with separate paths. > > 2. What if the required information is scattered across different memory > regions? In my case, the SoC ID is available from one OCOTP peripheral > block, the revision is in a separate ROM area at the start of the memory > map and some CPU information I am interested in is in another memory > region. I am not sure what would be the right way to approach it with > the nvmem framework. I think you would have two providers in that case one is ocotp and other is ROM. DT would look something like this: /* Provider */ ocotp { ... soc-id { reg = ...; }; }; rom { ... soc-reg { reg = ...; }; }; /* consumer */ consumer { nvmem-cell = <&soc_id>, <&soc_rev>; nvmem-cell-names = "soc-id", "soc-revision"; }; --srini > > [1] https://lkml.org/lkml/2015/6/5/189 > > Thanks & Regards, > Sanchayan Maity. > > > -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in Please read the FAQ at http://www.tux.org/lkml/