Date: Sat, 20 Jun 2015 09:45:06 +0200
From: Andreas Mohr <andi@lisas.de>
To: zb@cybertec.at
Cc: linux-kernel@vger.kernel.org
Subject: Re: ACPI regression? Was Re: Ethernet chip disappeared from lspci
Message-ID: <20150620074506.GA4000@rhlx01.hs-esslingen.de>
MIME-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Content-Disposition: inline
User-Agent: Mutt/1.5.23 (2014-03-12)
Sender: linux-kernel-owner@vger.kernel.org
Content-Length: 864
Lines: 27

Hi,

[lkml.org still broken --> no accurate mail header info possible...]

Just to ask the obvious:
I assume using /sys/bus/pci/rescan does not help once it's broken?
(since the machine comes up empty at initial-boot scan, too)


Also, you could try diffing lspci -vvxxx -s.... output
of working vs. "distorting" kernel version - perhaps some register setup
has been changed (e.g. due to power management improvements or some such),
which may encourage the card
to get a problematic/corrupt state.

> Upon powering off the system,
> the r8169 driver compained about "rtl_eriar_cond = 1 loop 100"

Yup, that seems to be
rtl_eri_read() in ethernet/realtek/r8169.c
waiting on low condition of
    RTL_R32(ERIAR) & ERIAR_FLAG;

Andreas Mohr
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
Please read the FAQ at  http://www.tux.org/lkml/