Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S932696AbbFXBGc (ORCPT ); Tue, 23 Jun 2015 21:06:32 -0400 Received: from mail-pd0-f173.google.com ([209.85.192.173]:36715 "EHLO mail-pd0-f173.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1754938AbbFXBGZ (ORCPT ); Tue, 23 Jun 2015 21:06:25 -0400 Date: Wed, 24 Jun 2015 06:36:21 +0530 From: Viresh Kumar To: Pi-Cheng Chen , mturquette@baylibre.com Cc: Mike Turquette , Matthias Brugger , Mark Rutland , "devicetree@vger.kernel.org" , "linux-arm-kernel@lists.infradead.org" , Linux Kernel Mailing List , "linux-pm@vger.kernel.org" , Linaro Kernel Mailman List , linux-mediatek@lists.infradead.org Subject: Re: [PATCH 1/2] dt-bindings: mediatek: Add MT8173 cpufreq driver binding Message-ID: <20150624010621.GB6424@linux> References: <1433766561-1330-1-git-send-email-pi-cheng.chen@linaro.org> <1433766561-1330-2-git-send-email-pi-cheng.chen@linaro.org> MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline In-Reply-To: User-Agent: Mutt/1.5.21 (2010-09-15) Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 6159 Lines: 149 Adding Mike's new email address.. On 23-06-15, 23:31, Pi-Cheng Chen wrote: > On Mon, Jun 8, 2015 at 8:29 PM, Pi-Cheng Chen wrote: > > This patch adds device tree binding document for MT8173 cpufreq driver. > > > > Signed-off-by: Pi-Cheng Chen > > --- > > .../devicetree/bindings/cpufreq/cpufreq-mt8173.txt | 127 +++++++++++++++++++++ > > 1 file changed, 127 insertions(+) > > create mode 100644 Documentation/devicetree/bindings/cpufreq/cpufreq-mt8173.txt > > > > diff --git a/Documentation/devicetree/bindings/cpufreq/cpufreq-mt8173.txt b/Documentation/devicetree/bindings/cpufreq/cpufreq-mt8173.txt > > new file mode 100644 > > index 0000000..7708a65 > > --- /dev/null > > +++ b/Documentation/devicetree/bindings/cpufreq/cpufreq-mt8173.txt > > @@ -0,0 +1,127 @@ > > + > > +Mediatek MT8173 cpufreq driver > > +------------------- Few more ---- required. > > + > > +Mediatek MT8173 cpufreq driver for CPU frequency scaling. > > + > > +Required properties: > > +- clocks: A list of phandle + clock-specifier pairs for the clocks listed in clock names. > > +- clock-names: Should contain the following: > > + "cpu" - The multiplexer for clock input of CPU cluster. > > + "intermediate" - A parent of "cpu" clock which is used as "intermediate" clock > > + source (usually MAINPLL) when the original CPU PLL is under > > + transition and not stable yet. These belong to Mike. > > +- operating-points: Table of frequencies and voltage CPU could be transitioned into, > > + Frequency should be in KHz units and voltage should be in microvolts. That's not complete. You should just mention the path to opp bindings here. And that's it. > > +- proc-supply: Regulator for Vproc of CPU cluster. > > + > > +Optional properties: > > +- sram-supply: Regulator for Vsram of CPU cluster. When present, the cpufreq driver > > + needs to do "voltage trace" to step by step scale up/down Vproc and > > + Vsram to fit SoC specific needs. When absent, the voltage scaling > > + flow is handled by hardware, hence no software "voltage trace" is > > + needed. > > + > > +Example: > > +-------- > > + cpu0: cpu@0 { > > + device_type = "cpu"; > > + compatible = "arm,cortex-a53"; > > + reg = <0x000>; > > + enable-method = "psci"; > > + cpu-idle-states = <&CPU_SLEEP_0>; > > + clocks = <&infracfg CLK_INFRA_CA53SEL>, > > + <&apmixedsys CLK_APMIXED_MAINPLL>; > > + clock-names = "cpu", "intermediate"; > > + operating-points = < > > + 507000 859000 > > + 702000 908000 > > + 1001000 983000 > > + 1105000 1009000 > > + 1183000 1028000 > > + 1404000 1083000 > > + 1508000 1109000 > > + 1573000 1125000 > > + >; > > + }; > > + > > + cpu1: cpu@1 { > > + device_type = "cpu"; > > + compatible = "arm,cortex-a53"; > > + reg = <0x001>; > > + enable-method = "psci"; > > + cpu-idle-states = <&CPU_SLEEP_0>; > > + clocks = <&infracfg CLK_INFRA_CA53SEL>, > > + <&apmixedsys CLK_APMIXED_MAINPLL>; > > + clock-names = "cpu", "intermediate"; > > + operating-points = < > > + 507000 859000 > > + 702000 908000 > > + 1001000 983000 > > + 1105000 1009000 > > + 1183000 1028000 > > + 1404000 1083000 > > + 1508000 1109000 > > + 1573000 1125000 > > + >; > > + }; > > + > > + cpu2: cpu@100 { > > + device_type = "cpu"; > > + compatible = "arm,cortex-a57"; > > + reg = <0x100>; > > + enable-method = "psci"; > > + cpu-idle-states = <&CPU_SLEEP_0>; > > + clocks = <&infracfg CLK_INFRA_CA57SEL>, > > + <&apmixedsys CLK_APMIXED_MAINPLL>; > > + clock-names = "cpu", "intermediate"; > > + operating-points = < > > + 507000 828000 > > + 702000 867000 > > + 1001000 927000 > > + 1209000 968000 > > + 1404000 1007000 > > + 1612000 1049000 > > + 1807000 1089000 > > + 1989000 1125000 > > + >; > > + }; > > + > > + cpu3: cpu@101 { > > + device_type = "cpu"; > > + compatible = "arm,cortex-a57"; > > + reg = <0x101>; > > + enable-method = "psci"; > > + cpu-idle-states = <&CPU_SLEEP_0>; > > + clocks = <&infracfg CLK_INFRA_CA57SEL>, > > + <&apmixedsys CLK_APMIXED_MAINPLL>; > > + clock-names = "cpu", "intermediate"; > > + operating-points = < > > + 507000 828000 > > + 702000 867000 > > + 1001000 927000 > > + 1209000 968000 > > + 1404000 1007000 > > + 1612000 1049000 > > + 1807000 1089000 > > + 1989000 1125000 > > + >; > > + }; I remember Mark Rutland asking you about the replicated stuff for all CPUs, but happened to his comments later on ? Were you asked to put these for all the CPUs ? -- viresh -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/