Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1752227AbbFXJ1F (ORCPT ); Wed, 24 Jun 2015 05:27:05 -0400 Received: from mail-pa0-f44.google.com ([209.85.220.44]:36127 "EHLO mail-pa0-f44.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1751980AbbFXJ0Z (ORCPT ); Wed, 24 Jun 2015 05:26:25 -0400 From: Vaibhav Hiremath To: linux-arm-kernel@lists.infradead.org Cc: devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, lee.jones@linaro.org, robh+dt@kernel.org, Vaibhav Hiremath , Zhao Ye Subject: [PATCH-v3 2/3] mfd: 88pm800: Allow configuration of interrupt clear method Date: Wed, 24 Jun 2015 14:51:12 +0530 Message-Id: <1435137673-1629-3-git-send-email-vaibhav.hiremath@linaro.org> X-Mailer: git-send-email 1.9.1 In-Reply-To: <1435137673-1629-1-git-send-email-vaibhav.hiremath@linaro.org> References: <1435137673-1629-1-git-send-email-vaibhav.hiremath@linaro.org> Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 3592 Lines: 110 As per the spec, bit 1 (INT_CLEAR_MODE) of reg addr 0xe (page 0) controls the method of clearing interrupt status of 88pm800 family of devices; 0: clear on read 1: clear on write This patch allows to configure this field, through DT. Also, as suggested by "Lee Jones" renaming DT property and variable field to appropriate name. Signed-off-by: Zhao Ye Signed-off-by: Vaibhav Hiremath --- drivers/mfd/88pm800.c | 15 ++++++++++----- include/linux/mfd/88pm80x.h | 6 ++++-- 2 files changed, 14 insertions(+), 7 deletions(-) diff --git a/drivers/mfd/88pm800.c b/drivers/mfd/88pm800.c index 059f01a..c1a6306 100644 --- a/drivers/mfd/88pm800.c +++ b/drivers/mfd/88pm800.c @@ -376,7 +376,7 @@ static int device_irq_init_800(struct pm80x_chip *chip) { struct regmap *map = chip->regmap; unsigned long flags = IRQF_ONESHOT; - int data, mask, ret = -EINVAL; + int irq_clr_mode, mask, ret = -EINVAL; if (!map || !chip->irq) { dev_err(chip->dev, "incorrect parameters\n"); @@ -384,15 +384,16 @@ static int device_irq_init_800(struct pm80x_chip *chip) } /* - * irq_mode defines the way of clearing interrupt. it's read-clear by - * default. + * irq_clr_on_wr defines the way of clearing interrupt by + * read/write(0/1). It's read-clear by default. */ mask = PM800_WAKEUP2_INV_INT | PM800_WAKEUP2_INT_CLEAR | PM800_WAKEUP2_INT_MASK; - data = PM800_WAKEUP2_INT_CLEAR; - ret = regmap_update_bits(map, PM800_WAKEUP2, mask, data); + irq_clr_mode = (chip->irq_clr_on_wr) ? + PM800_WAKEUP2_INT_WRITE_CLEAR : PM800_WAKEUP2_INT_READ_CLEAR; + ret = regmap_update_bits(map, PM800_WAKEUP2, mask, irq_clr_mode); if (ret < 0) goto out; @@ -514,6 +515,7 @@ static int device_800_init(struct pm80x_chip *chip, } chip->regmap_irq_chip = &pm800_irq_chip; + chip->irq_clr_on_wr = pdata->irq_clr_on_wr; ret = device_irq_init_800(chip); if (ret < 0) { @@ -568,6 +570,9 @@ static int pm800_probe(struct i2c_client *client, dev_err(&client->dev, "failed to allocaate memory\n"); return -ENOMEM; } + + pdata->irq_clr_on_wr = of_property_read_bool(np, + "marvell,irq-clr-on-write"); } ret = pm80x_init(client); diff --git a/include/linux/mfd/88pm80x.h b/include/linux/mfd/88pm80x.h index 97cb283..94b3dcd 100644 --- a/include/linux/mfd/88pm80x.h +++ b/include/linux/mfd/88pm80x.h @@ -77,6 +77,8 @@ enum { #define PM800_WAKEUP2 (0x0E) #define PM800_WAKEUP2_INV_INT (1 << 0) #define PM800_WAKEUP2_INT_CLEAR (1 << 1) +#define PM800_WAKEUP2_INT_READ_CLEAR (0 << 1) +#define PM800_WAKEUP2_INT_WRITE_CLEAR (1 << 1) #define PM800_WAKEUP2_INT_MASK (1 << 2) #define PM800_POWER_UP_LOG (0x10) @@ -300,7 +302,7 @@ struct pm80x_chip { struct regmap_irq_chip_data *irq_data; int type; int irq; - int irq_mode; + int irq_clr_on_wr; /* '1': Clear on write, '0': Clear on read*/ unsigned long wu_flag; spinlock_t lock; }; @@ -315,7 +317,7 @@ struct pm80x_platform_data { */ struct regulator_init_data *regulators[PM800_ID_RG_MAX]; unsigned int num_regulators; - int irq_mode; /* Clear interrupt by read/write(0/1) */ + int irq_clr_on_wr; /* Clear interrupt by read/write(0/1) */ int batt_det; /* enable/disable */ int (*plat_config)(struct pm80x_chip *chip, struct pm80x_platform_data *pdata); -- 1.9.1 -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/