Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S932268AbbFXQbm (ORCPT ); Wed, 24 Jun 2015 12:31:42 -0400 Received: from mail-pd0-f172.google.com ([209.85.192.172]:35165 "EHLO mail-pd0-f172.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1753676AbbFXQ0W (ORCPT ); Wed, 24 Jun 2015 12:26:22 -0400 From: Juston Li To: sudipm.mukherjee@gmail.com, teddy.wang@siliconmotion.com, gregkh@linuxfoundation.org, linux-fbdev@vger.kernel.org, devel@driverdev.osuosl.org, linux-kernel@vger.kernel.org, dan.carpenter@oracle.com Cc: Juston Li Subject: [PATCH v3 06/19] staging: sm750fb: add space before open brace Date: Wed, 24 Jun 2015 09:25:07 -0700 Message-Id: <1435163120-3253-6-git-send-email-juston.h.li@gmail.com> X-Mailer: git-send-email 2.4.4 In-Reply-To: References: Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 14342 Lines: 448 fixes checkpatch.pl error: ERROR: space required before the open brace '{' Signed-off-by: Juston Li --- drivers/staging/sm750fb/ddk750_display.c | 14 ++++---- drivers/staging/sm750fb/ddk750_mode.c | 8 ++--- drivers/staging/sm750fb/ddk750_power.c | 4 +-- drivers/staging/sm750fb/sm750_accel.c | 6 ++-- drivers/staging/sm750fb/sm750_cursor.c | 14 ++++---- drivers/staging/sm750fb/sm750_hw.c | 56 ++++++++++++++++---------------- 6 files changed, 51 insertions(+), 51 deletions(-) diff --git a/drivers/staging/sm750fb/ddk750_display.c b/drivers/staging/sm750fb/ddk750_display.c index 973dec3..c7171a4 100644 --- a/drivers/staging/sm750fb/ddk750_display.c +++ b/drivers/staging/sm750fb/ddk750_display.c @@ -132,7 +132,7 @@ static void setDisplayControl(int ctrl, int dispState) static void waitNextVerticalSync(int ctrl, int delay) { unsigned int status; - if (!ctrl){ + if (!ctrl) { /* primary controller */ /* Do not wait when the Primary PLL is off or display control is already off. @@ -166,7 +166,7 @@ static void waitNextVerticalSync(int ctrl, int delay) while (status == SYSTEM_CTRL_PANEL_VSYNC_INACTIVE); } - }else{ + }else { /* Do not wait when the Primary PLL is off or display control is already off. This will prevent the software to wait forever. */ @@ -233,14 +233,14 @@ static void swPanelPowerSequence(int disp, int delay) void ddk750_setLogicalDispOut(disp_output_t output) { unsigned int reg; - if (output & PNL_2_USAGE){ + if (output & PNL_2_USAGE) { /* set panel path controller select */ reg = PEEK32(PANEL_DISPLAY_CTRL); reg = FIELD_VALUE(reg, PANEL_DISPLAY_CTRL, SELECT, (output & PNL_2_MASK)>>PNL_2_OFFSET); POKE32(PANEL_DISPLAY_CTRL, reg); } - if (output & CRT_2_USAGE){ + if (output & CRT_2_USAGE) { /* set crt path controller select */ reg = PEEK32(CRT_DISPLAY_CTRL); reg = FIELD_VALUE(reg, CRT_DISPLAY_CTRL, SELECT, (output & CRT_2_MASK)>>CRT_2_OFFSET); @@ -250,17 +250,17 @@ void ddk750_setLogicalDispOut(disp_output_t output) } - if (output & PRI_TP_USAGE){ + if (output & PRI_TP_USAGE) { /* set primary timing and plane en_bit */ setDisplayControl(0, (output&PRI_TP_MASK)>>PRI_TP_OFFSET); } - if (output & SEC_TP_USAGE){ + if (output & SEC_TP_USAGE) { /* set secondary timing and plane en_bit*/ setDisplayControl(1, (output&SEC_TP_MASK)>>SEC_TP_OFFSET); } - if (output & PNL_SEQ_USAGE){ + if (output & PNL_SEQ_USAGE) { /* set panel sequence */ swPanelPowerSequence((output&PNL_SEQ_MASK)>>PNL_SEQ_OFFSET, 4); } diff --git a/drivers/staging/sm750fb/ddk750_mode.c b/drivers/staging/sm750fb/ddk750_mode.c index cfe528c..efc1fab 100644 --- a/drivers/staging/sm750fb/ddk750_mode.c +++ b/drivers/staging/sm750fb/ddk750_mode.c @@ -107,9 +107,9 @@ static int programModeRegisters(mode_parameter_t *pModeParam, pll_value_t *pll) FIELD_SET(0, CRT_DISPLAY_CTRL, PLANE, ENABLE); - if (getChipType() == SM750LE){ + if (getChipType() == SM750LE) { displayControlAdjust_SM750LE(pModeParam, ulTmpValue); - }else{ + }else { ulReg = PEEK32(CRT_DISPLAY_CTRL) & FIELD_CLEAR(CRT_DISPLAY_CTRL, VSYNC_PHASE) & FIELD_CLEAR(CRT_DISPLAY_CTRL, HSYNC_PHASE) @@ -179,7 +179,7 @@ static int programModeRegisters(mode_parameter_t *pModeParam, pll_value_t *pll) } #endif } - else{ + else { ret = -1; } return ret; @@ -193,7 +193,7 @@ int ddk750_setModeTiming(mode_parameter_t *parm, clock_type_t clock) pll.clockType = clock; uiActualPixelClk = calcPllValue(parm->pixel_clock, &pll); - if (getChipType() == SM750LE){ + if (getChipType() == SM750LE) { /* set graphic mode via IO method */ outb_p(0x88, 0x3d4); outb_p(0x06, 0x3d5); diff --git a/drivers/staging/sm750fb/ddk750_power.c b/drivers/staging/sm750fb/ddk750_power.c index a2d9ee6..e2c0bb3 100644 --- a/drivers/staging/sm750fb/ddk750_power.c +++ b/drivers/staging/sm750fb/ddk750_power.c @@ -5,10 +5,10 @@ void ddk750_setDPMS(DPMS_t state) { unsigned int value; - if (getChipType() == SM750LE){ + if (getChipType() == SM750LE) { value = PEEK32(CRT_DISPLAY_CTRL); POKE32(CRT_DISPLAY_CTRL, FIELD_VALUE(value, CRT_DISPLAY_CTRL, DPMS, state)); - }else{ + }else { value = PEEK32(SYSTEM_CTRL); value= FIELD_VALUE(value, SYSTEM_CTRL, DPMS, state); POKE32(SYSTEM_CTRL, value); diff --git a/drivers/staging/sm750fb/sm750_accel.c b/drivers/staging/sm750fb/sm750_accel.c index bb96ea5..25dc15b 100644 --- a/drivers/staging/sm750fb/sm750_accel.c +++ b/drivers/staging/sm750fb/sm750_accel.c @@ -248,7 +248,7 @@ unsigned int rop2) /* ROP value */ Note that input pitch is BYTE value, but the 2D Pitch register uses pixel values. Need Byte to pixel conversion. */ - if (Bpp == 3){ + if (Bpp == 3) { sx *= 3; dx *= 3; width *= 3; @@ -271,7 +271,7 @@ unsigned int rop2) /* ROP value */ FIELD_VALUE(0, DE_WINDOW_WIDTH, DESTINATION, (dPitch/Bpp)) | FIELD_VALUE(0, DE_WINDOW_WIDTH, SOURCE, (sPitch/Bpp))); /* dpr3c */ - if (accel->de_wait() != 0){ + if (accel->de_wait() != 0) { return -1; } @@ -363,7 +363,7 @@ int hw_imageblit(struct lynx_accel *accel, Note that input pitch is BYTE value, but the 2D Pitch register uses pixel values. Need Byte to pixel conversion. */ - if (bytePerPixel == 3){ + if (bytePerPixel == 3) { dx *= 3; width *= 3; startBit *= 3; diff --git a/drivers/staging/sm750fb/sm750_cursor.c b/drivers/staging/sm750fb/sm750_cursor.c index 95cfb8f..3a21af9 100644 --- a/drivers/staging/sm750fb/sm750_cursor.c +++ b/drivers/staging/sm750fb/sm750_cursor.c @@ -143,14 +143,14 @@ void hw_cursor_setData(struct lynx_cursor *cursor, if (opr & (0x80 >> j)) { /* use fg color,id = 2 */ data |= 2 << (j*2); - }else{ + }else { /* use bg color,id = 1 */ data |= 1 << (j*2); } } #else - for (j=0;j<8;j++){ - if (mask & (0x80>>j)){ + for (j=0;j<8;j++) { + if (mask & (0x80>>j)) { if (rop == ROP_XOR) opr = mask ^ color; else @@ -173,7 +173,7 @@ void hw_cursor_setData(struct lynx_cursor *cursor, /* need a return */ pstart += offset; pbuffer = pstart; - }else{ + }else { pbuffer += sizeof(u16); } @@ -223,13 +223,13 @@ void hw_cursor_setData2(struct lynx_cursor *cursor, if (opr & (0x80 >> j)) { /* use fg color,id = 2 */ data |= 2 << (j*2); - }else{ + }else { /* use bg color,id = 1 */ data |= 1 << (j*2); } } #else - for (j=0;j<8;j++){ + for (j=0;j<8;j++) { if (mask & (1<pvReg = ioremap_nocache(share->vidreg_start, share->vidreg_size); - if (!share->pvReg){ + if (!share->pvReg) { pr_err("mmio failed\n"); ret = -EFAULT; goto exit; - }else{ + }else { pr_info("mmio virtual addr = %p\n", share->pvReg); } @@ -87,11 +87,11 @@ int hw_sm750_map(struct lynx_share* share, struct pci_dev* pdev) share->pvMem = ioremap_wc(share->vidmem_start, share->vidmem_size); - if (!share->pvMem){ + if (!share->pvMem) { pr_err("Map video memory failed\n"); ret = -EFAULT; goto exit; - }else{ + }else { pr_info("video memory vaddr = %p\n", share->pvMem); } exit: @@ -119,7 +119,7 @@ int hw_sm750_inithw(struct lynx_share *share, struct pci_dev *pdev) ddk750_initHw((initchip_param_t *)&spec_share->state.initParm); /* for sm718,open pci burst */ - if (share->devid == 0x718){ + if (share->devid == 0x718) { POKE32(SYSTEM_CTRL, FIELD_SET(PEEK32(SYSTEM_CTRL), SYSTEM_CTRL, PCI_BURST, ON)); } @@ -133,7 +133,7 @@ int hw_sm750_inithw(struct lynx_share *share, struct pci_dev *pdev) if (getChipType() != SM750LE) { /* does user need CRT ?*/ - if (spec_share->state.nocrt){ + if (spec_share->state.nocrt) { POKE32(MISC_CTRL, FIELD_SET(PEEK32(MISC_CTRL), MISC_CTRL, @@ -143,7 +143,7 @@ int hw_sm750_inithw(struct lynx_share *share, struct pci_dev *pdev) FIELD_SET(PEEK32(SYSTEM_CTRL), SYSTEM_CTRL, DPMS, VNHN)); - }else{ + }else { POKE32(MISC_CTRL, FIELD_SET(PEEK32(MISC_CTRL), MISC_CTRL, @@ -155,7 +155,7 @@ int hw_sm750_inithw(struct lynx_share *share, struct pci_dev *pdev) DPMS, VPHP)); } - switch (spec_share->state.pnltype){ + switch (spec_share->state.pnltype) { case sm750_doubleTFT: case sm750_24TFT: case sm750_dualTFT: @@ -166,7 +166,7 @@ int hw_sm750_inithw(struct lynx_share *share, struct pci_dev *pdev) spec_share->state.pnltype)); break; } - }else{ + }else { /* for 750LE ,no DVI chip initilization makes Monitor no signal */ /* Set up GPIO for software I2C to program DVI chip in the Xilinx SP605 board, in order to have video signal. @@ -191,7 +191,7 @@ int hw_sm750_inithw(struct lynx_share *share, struct pci_dev *pdev) } /* init 2d engine */ - if (!share->accel_off){ + if (!share->accel_off) { hw_sm750_initAccel(share); } @@ -228,15 +228,15 @@ int hw_sm750_output_setMode(struct lynxfb_output* output, channel = *output->channel; - if (getChipType() != SM750LE){ - if (channel == sm750_primary){ + if (getChipType() != SM750LE) { + if (channel == sm750_primary) { pr_info("primary channel\n"); if (output->paths & sm750_panel) dispSet |= do_LCD1_PRI; if (output->paths & sm750_crt) dispSet |= do_CRT_PRI; - }else{ + }else { pr_info("secondary channel\n"); if (output->paths & sm750_panel) dispSet |= do_LCD1_SEC; @@ -245,7 +245,7 @@ int hw_sm750_output_setMode(struct lynxfb_output* output, } ddk750_setLogicalDispOut(dispSet); - }else{ + }else { /* just open DISPLAY_CONTROL_750LE register bit 3:0*/ u32 reg; reg = PEEK32(DISPLAY_CONTROL_750LE); @@ -270,7 +270,7 @@ int hw_sm750_crtc_checkMode(struct lynxfb_crtc* crtc, struct fb_var_screeninfo* share = container_of(crtc, struct lynxfb_par, crtc)->share; - switch (var->bits_per_pixel){ + switch (var->bits_per_pixel) { case 8: case 16: break; @@ -308,9 +308,9 @@ int hw_sm750_crtc_setMode(struct lynxfb_crtc* crtc, par = container_of(crtc, struct lynxfb_par, crtc); share = par->share; #if 1 - if (!share->accel_off){ + if (!share->accel_off) { /* set 2d engine pixel format according to mode bpp */ - switch (var->bits_per_pixel){ + switch (var->bits_per_pixel) { case 8: fmt = 0; break; @@ -348,12 +348,12 @@ int hw_sm750_crtc_setMode(struct lynxfb_crtc* crtc, pr_debug("Request pixel clock = %lu\n", modparm.pixel_clock); ret = ddk750_setModeTiming(&modparm, clock); - if (ret){ + if (ret) { pr_err("Set mode timing failed\n"); goto exit; } - if (crtc->channel != sm750_secondary){ + if (crtc->channel != sm750_secondary) { /* set pitch, offset ,width,start address ,etc... */ POKE32(PANEL_FB_ADDRESS, FIELD_SET(0, PANEL_FB_ADDRESS, STATUS, CURRENT)| @@ -389,7 +389,7 @@ int hw_sm750_crtc_setMode(struct lynxfb_crtc* crtc, PANEL_DISPLAY_CTRL, FORMAT, (var->bits_per_pixel >> 4) )); - }else{ + }else { /* not implemented now */ POKE32(CRT_FB_ADDRESS, crtc->oScreen); reg = var->xres * (var->bits_per_pixel >> 3); @@ -426,7 +426,7 @@ int hw_sm750_setColReg(struct lynxfb_crtc* crtc, ushort index, return 0; } -int hw_sm750le_setBLANK(struct lynxfb_output * output, int blank){ +int hw_sm750le_setBLANK(struct lynxfb_output * output, int blank) { int dpms, crtdb; switch (blank) @@ -473,7 +473,7 @@ int hw_sm750le_setBLANK(struct lynxfb_output * output, int blank){ return -EINVAL; } - if (output->paths & sm750_crt){ + if (output->paths & sm750_crt) { POKE32(CRT_DISPLAY_CTRL, FIELD_VALUE(PEEK32(CRT_DISPLAY_CTRL), CRT_DISPLAY_CTRL, DPMS, dpms)); POKE32(CRT_DISPLAY_CTRL, FIELD_VALUE(PEEK32(CRT_DISPLAY_CTRL), CRT_DISPLAY_CTRL, BLANK, crtdb)); } @@ -535,13 +535,13 @@ int hw_sm750_setBLANK(struct lynxfb_output* output, int blank) break; } - if (output->paths & sm750_crt){ + if (output->paths & sm750_crt) { POKE32(SYSTEM_CTRL, FIELD_VALUE(PEEK32(SYSTEM_CTRL), SYSTEM_CTRL, DPMS, dpms)); POKE32(CRT_DISPLAY_CTRL, FIELD_VALUE(PEEK32(CRT_DISPLAY_CTRL), CRT_DISPLAY_CTRL, BLANK, crtdb)); } - if (output->paths & sm750_panel){ + if (output->paths & sm750_panel) { POKE32(PANEL_DISPLAY_CTRL, FIELD_VALUE(PEEK32(PANEL_DISPLAY_CTRL), PANEL_DISPLAY_CTRL, DATA, pps)); } @@ -554,7 +554,7 @@ void hw_sm750_initAccel(struct lynx_share *share) u32 reg; enable2DEngine(1); - if (getChipType() == SM750LE){ + if (getChipType() == SM750LE) { reg = PEEK32(DE_STATE1); reg = FIELD_SET(reg, DE_STATE1, DE_ABORT, ON); POKE32(DE_STATE1, reg); @@ -563,7 +563,7 @@ void hw_sm750_initAccel(struct lynx_share *share) reg = FIELD_SET(reg, DE_STATE1, DE_ABORT, OFF); POKE32(DE_STATE1, reg); - }else{ + }else { /* engine reset */ reg = PEEK32(SYSTEM_CTRL); reg = FIELD_SET(reg, SYSTEM_CTRL, DE_ABORT, ON); @@ -581,7 +581,7 @@ void hw_sm750_initAccel(struct lynx_share *share) int hw_sm750le_deWait(void) { int i=0x10000000; - while (i--){ + while (i--) { unsigned int dwVal = PEEK32(DE_STATE2); if ((FIELD_GET(dwVal, DE_STATE2, DE_STATUS) == DE_STATE2_DE_STATUS_IDLE) && (FIELD_GET(dwVal, DE_STATE2, DE_FIFO) == DE_STATE2_DE_FIFO_EMPTY) && @@ -598,7 +598,7 @@ int hw_sm750le_deWait(void) int hw_sm750_deWait(void) { int i=0x10000000; - while (i--){ + while (i--) { unsigned int dwVal = PEEK32(SYSTEM_CTRL); if ((FIELD_GET(dwVal, SYSTEM_CTRL, DE_STATUS) == SYSTEM_CTRL_DE_STATUS_IDLE) && (FIELD_GET(dwVal, SYSTEM_CTRL, DE_FIFO) == SYSTEM_CTRL_DE_FIFO_EMPTY) && -- 2.4.4 -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/