Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id ; Wed, 5 Feb 2003 00:25:49 -0500 Received: (majordomo@vger.kernel.org) by vger.kernel.org id ; Wed, 5 Feb 2003 00:25:49 -0500 Received: from smtpzilla5.xs4all.nl ([194.109.127.141]:49419 "EHLO smtpzilla5.xs4all.nl") by vger.kernel.org with ESMTP id ; Wed, 5 Feb 2003 00:25:41 -0500 Date: Wed, 5 Feb 2003 06:34:40 +0100 From: Jurriaan To: Alan Cox Cc: linux-kernel@vger.kernel.org Subject: Re: Linux 2.4.21pre4-ac2 Message-ID: <20030205053440.GA1239@middle.of.nowhere> Reply-To: thunder7@xs4all.nl References: <200302041702.h14H2O112078@devserv.devel.redhat.com> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline In-Reply-To: <200302041702.h14H2O112078@devserv.devel.redhat.com> X-Message-Flag: Still using Outlook? Please Upgrade to real software! User-Agent: Mutt/1.5.3i Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 19354 Lines: 471 From: Alan Cox Date: Tue, Feb 04, 2003 at 12:02:24PM -0500 > More IDE updates. Finally switch the IDE layer over to the ide_execute_command > interface. This should cure problems people have seen for a long time with > big arrays and shared IRQ. Treat this with care. The other stuff is mostly > minor fixes and obscure updates, except for the Kahlua audio enabler > > Linux 2.4.21pre4-ac2 Your Makefile still claims to be ac1. > o Turn on use of ide_execute_command everywhere (Ross Biro, me) > o First cut at settings locking for IDE (me) Some of these may be responsible for something new: my system hangs at shutdown, saying 'flushing ide devices: hda hdc'. This didn't happen with 2.4.21pre3-ac5. hdc is a cdwriter, used as ide-scsi. Kind regards, Jurriaan Linux version 2.4.21-pre4-ac2 (root@middle) (gcc version 3.2.2 20030131 (Debian prerelease)) #2 SMP Tue Feb 4 20:17:24 CET 2003 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000001fff0000 (usable) BIOS-e820: 000000001fff0000 - 000000001fff3000 (ACPI NVS) BIOS-e820: 000000001fff3000 - 0000000020000000 (ACPI data) BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved) 511MB LOWMEM available. found SMP MP-table at 000f4f80 hm, page 000f4000 reserved twice. hm, page 000f5000 reserved twice. hm, page 000f1000 reserved twice. hm, page 000f2000 reserved twice. On node 0 totalpages: 131056 zone(0): 4096 pages. zone(1): 126960 pages. zone(2): 0 pages. Intel MultiProcessor Specification v1.4 Virtual Wire compatibility mode. OEM ID: OEM00000 Product ID: PROD00000000 APIC at: 0xFEE00000 Processor #0 Pentium(tm) Pro APIC version 17 Processor #1 Pentium(tm) Pro APIC version 17 I/O APIC #2 Version 17 at 0xFEC00000. Enabling APIC mode: Flat. Using 1 I/O APICs Processors: 2 Kernel command line: root=/dev/hda7 video=matrox:vesa:0x11E,fv:80,sgram hdc=scsi apm=power-off ide_setup: hdc=scsi Initializing CPU#0 Detected 1173.836 MHz processor. Console: colour VGA+ 80x25 Calibrating delay loop... 2339.63 BogoMIPS Memory: 515104k/524224k available (1748k kernel code, 8732k reserved, 439k data, 336k init, 0k highmem) Dentry cache hash table entries: 65536 (order: 7, 524288 bytes) Inode cache hash table entries: 32768 (order: 6, 262144 bytes) Mount cache hash table entries: 512 (order: 0, 4096 bytes) Buffer cache hash table entries: 32768 (order: 5, 131072 bytes) Page-cache hash table entries: 131072 (order: 7, 524288 bytes) CPU: L1 I cache: 16K, L1 D cache: 16K CPU: L2 cache: 512K Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. CPU: After generic, caps: 0383fbff 00000000 00000000 00000000 CPU: Common caps: 0383fbff 00000000 00000000 00000000 Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Checking 'hlt' instruction... OK. POSIX conformance testing by UNIFIX mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au) mtrr: detected mtrr type: Intel CPU: L1 I cache: 16K, L1 D cache: 16K CPU: L2 cache: 512K Intel machine check reporting enabled on CPU#0. CPU: After generic, caps: 0383fbff 00000000 00000000 00000000 CPU: Common caps: 0383fbff 00000000 00000000 00000000 CPU0: Intel(R) Pentium(R) III CPU - S 1400MHz stepping 04 per-CPU timeslice cutoff: 1463.48 usecs. task migration cache decay timeout: 10 msecs. enabled ExtINT on CPU#0 ESR value before enabling vector: 00000000 ESR value after enabling vector: 00000000 Booting processor 1/1 eip 2000 Initializing CPU#1 masked ExtINT on CPU#1 ESR value before enabling vector: 00000000 ESR value after enabling vector: 00000000 Calibrating delay loop... 2346.18 BogoMIPS CPU: L1 I cache: 16K, L1 D cache: 16K CPU: L2 cache: 512K Intel machine check reporting enabled on CPU#1. CPU: After generic, caps: 0383fbff 00000000 00000000 00000000 CPU: Common caps: 0383fbff 00000000 00000000 00000000 CPU1: Intel(R) Pentium(R) III CPU - S 1400MHz stepping 04 Total of 2 processors activated (4685.82 BogoMIPS). ENABLING IO-APIC IRQs Setting 2 in the phys_id_present_map ...changing IO-APIC physical APIC ID to 2 ... ok. init IO_APIC IRQs IO-APIC (apicid-pin) 2-0, 2-16, 2-17, 2-18, 2-19, 2-20, 2-21, 2-22, 2-23 not connected. ..TIMER: vector=0x31 pin1=2 pin2=0 number of MP IRQ sources: 25. number of IO-APIC #2 registers: 24. testing the IO APIC....................... IO APIC #2...... .... register #00: 02000000 ....... : physical APIC id: 02 .... register #01: 00178011 ....... : max redirection entries: 0017 ....... : PRQ implemented: 1 ....... : IO APIC version: 0011 .... register #02: 00000000 ....... : arbitration: 00 .... IRQ redirection table: NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect: 00 000 00 1 0 0 0 0 0 0 00 01 001 01 0 0 0 0 0 1 1 39 02 001 01 0 0 0 0 0 1 1 31 03 001 01 0 0 0 0 0 1 1 41 04 001 01 0 0 0 0 0 1 1 49 05 001 01 1 1 0 1 0 1 1 51 06 001 01 0 0 0 0 0 1 1 59 07 001 01 0 0 0 0 0 1 1 61 08 001 01 0 0 0 0 0 1 1 69 09 001 01 0 0 0 0 0 1 1 71 0a 001 01 1 1 0 1 0 1 1 79 0b 001 01 1 1 0 1 0 1 1 81 0c 001 01 0 0 0 0 0 1 1 89 0d 001 01 0 0 0 0 0 1 1 91 0e 001 01 0 0 0 0 0 1 1 99 0f 001 01 0 0 0 0 0 1 1 A1 10 000 00 1 0 0 0 0 0 0 00 11 000 00 1 0 0 0 0 0 0 00 12 000 00 1 0 0 0 0 0 0 00 13 000 00 1 0 0 0 0 0 0 00 14 000 00 1 0 0 0 0 0 0 00 15 000 00 1 0 0 0 0 0 0 00 16 000 00 1 0 0 0 0 0 0 00 17 000 00 1 0 0 0 0 0 0 00 IRQ to pin mappings: IRQ0 -> 0:2 IRQ1 -> 0:1 IRQ3 -> 0:3 IRQ4 -> 0:4 IRQ5 -> 0:5 IRQ6 -> 0:6 IRQ7 -> 0:7 IRQ8 -> 0:8 IRQ9 -> 0:9 IRQ10 -> 0:10 IRQ11 -> 0:11 IRQ12 -> 0:12 IRQ13 -> 0:13 IRQ14 -> 0:14 IRQ15 -> 0:15 .................................... done. Using local APIC timer interrupts. calibrating APIC timer ... ..... CPU clock speed is 1173.8847 MHz. ..... host bus clock speed is 111.7985 MHz. cpu: 0, clocks: 1117985, slice: 372661 CPU0 cpu: 1, clocks: 1117985, slice: 372661 CPU1 migration_task 0 on cpu=0 migration_task 1 on cpu=1 mtrr: your CPUs had inconsistent fixed MTRR settings mtrr: your CPUs had inconsistent variable MTRR settings mtrr: probably your BIOS does not setup all CPUs PCI: PCI BIOS revision 2.10 entry at 0xfb3c0, last bus=1 PCI: Using configuration type 1 PCI: Probing PCI hardware PCI: Using IRQ router default [1106/3101] at 00:00.0 PCI->APIC IRQ transform: (B0,I9,P0) -> 11 PCI->APIC IRQ transform: (B0,I11,P0) -> 10 PCI->APIC IRQ transform: (B0,I12,P0) -> 5 PCI->APIC IRQ transform: (B0,I13,P0) -> 11 PCI->APIC IRQ transform: (B0,I14,P0) -> 10 PCI->APIC IRQ transform: (B0,I15,P0) -> 10 PCI->APIC IRQ transform: (B0,I17,P3) -> 5 PCI->APIC IRQ transform: (B0,I17,P3) -> 5 PCI->APIC IRQ transform: (B0,I17,P3) -> 5 PCI->APIC IRQ transform: (B0,I18,P0) -> 11 PCI->APIC IRQ transform: (B1,I0,P0) -> 11 Linux NET4.0 for Linux 2.4 Based upon Swansea University Computer Society NET3.039 Initializing RT netlink socket apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16) apm: disabled - APM is not SMP safe (power off active). Starting kswapd matroxfb: Matrox G400 (AGP) detected matroxfb: MTRR's turned on matroxfb: 1600x1200x16bpp (virtual: 1600x5241) matroxfb: framebuffer at 0xD4000000, mapped to 0xe0805000, size 33554432 Console: switching to colour frame buffer device 133x54 fb0: MATROX VGA frame buffer device pty: 256 Unix98 ptys configured Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI enabled ttyS00 at 0x03f8 (irq = 4) is a 16550A ttyS01 at 0x02f8 (irq = 3) is a 16550A Software Watchdog Timer: 0.05, timer margin: 60 sec Floppy drive(s): fd0 is 1.44M FDC 0 is a post-1991 82077 Linux Tulip driver version 0.9.15-pre12 (Aug 9, 2002) tulip0: MII transceiver #1 config 3100 status 7829 advertising 01e1. eth0: Lite-On 82c168 PNIC rev 32 at 0xac00, 00:A0:CC:21:A1:AC, IRQ 5. via-rhine.c:v1.10-LK1.1.15 November-22-2002 Written by Donald Becker http://www.scyld.com/network/via-rhine.html eth1: VIA VT6102 Rhine-II at 0xda022000, 00:d0:68:00:5a:8b, IRQ 11. eth1: MII PHY found at address 1, status 0x786d advertising 05e1 Link 45e1. Uniform Multi-Platform E-IDE driver Revision: 7.00beta-2.4 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx PDC20265: IDE controller at PCI slot 00:0d.0 PDC20265: chipset revision 2 PDC20265: not 100% native mode: will probe irqs later PDC20265: (U)DMA Burst Bit DISABLED Primary PCI Mode Secondary PCI Mode. ide2: BM-DMA at 0xc000-0xc007, BIOS settings: hde:DMA, hdf:DMA ide3: BM-DMA at 0xc008-0xc00f, BIOS settings: hdg:DMA, hdh:pio HPT370A: IDE controller at PCI slot 00:0f.0 HPT370A: chipset revision 4 HPT370A: not 100% native mode: will probe irqs later HPT37X: using 33MHz PCI clock ide4: BM-DMA at 0xd800-0xd807, BIOS settings: hdi:DMA, hdj:pio ide5: BM-DMA at 0xd808-0xd80f, BIOS settings: hdk:DMA, hdl:pio VP_IDE: IDE controller at PCI slot 00:11.1 VP_IDE: chipset revision 6 VP_IDE: not 100% native mode: will probe irqs later VP_IDE: VIA vt8233 (rev 00) IDE UDMA100 controller on pci00:11.1 ide0: BM-DMA at 0xdc00-0xdc07, BIOS settings: hda:DMA, hdb:pio ide1: BM-DMA at 0xdc08-0xdc0f, BIOS settings: hdc:DMA, hdd:pio hda: Maxtor 33073H3, ATA DISK drive blk: queue c03df440, I/O limit 4095Mb (mask 0xffffffff) hdc: LITE-ON LTR-40125W, ATAPI CD/DVD-ROM drive hde: Maxtor 4G120J6, ATA DISK drive hdf: Maxtor 4G120J6, ATA DISK drive blk: queue c03dfd60, I/O limit 4095Mb (mask 0xffffffff) blk: queue c03dfebc, I/O limit 4095Mb (mask 0xffffffff) hdg: IBM-DTLA-307045, ATA DISK drive blk: queue c03e01f0, I/O limit 4095Mb (mask 0xffffffff) hdi: WDC WD800JB-00CRA1, ATA DISK drive blk: queue c03e0680, I/O limit 4095Mb (mask 0xffffffff) hdk: WDC WD800JB-00CRA1, ATA DISK drive blk: queue c03e0b10, I/O limit 4095Mb (mask 0xffffffff) ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 ide1 at 0x170-0x177,0x376 on irq 15 ide2 at 0xb000-0xb007,0xb402 on irq 11 ide3 at 0xb800-0xb807,0xbc02 on irq 11 ide4 at 0xc800-0xc807,0xcc02 on irq 10 ide5 at 0xd000-0xd007,0xd402 on irq 10 hda: host protected area => 1 hda: 60032448 sectors (30737 MB) w/2048KiB Cache, CHS=3736/255/63, UDMA(100) hde: host protected area => 1 hde: 240121728 sectors (122942 MB) w/2048KiB Cache, CHS=14946/255/63, UDMA(100) hdf: host protected area => 1 hdf: 240121728 sectors (122942 MB) w/2048KiB Cache, CHS=14946/255/63, UDMA(100) hdg: host protected area => 1 hdg: 90069840 sectors (46116 MB) w/1916KiB Cache, CHS=89355/16/63, UDMA(100) hdi: host protected area => 1 hdi: 156301488 sectors (80026 MB) w/8192KiB Cache, CHS=155061/16/63, UDMA(100) hdk: host protected area => 1 hdk: 156301488 sectors (80026 MB) w/8192KiB Cache, CHS=155061/16/63, UDMA(100) ide-cd: passing drive hdc to ide-scsi emulation. Partition check: hda: hda1 hda2 < hda5 hda6 hda7 hda8 hda9 hda10 hda11 hda12 > hde: hde1 hde2 hdf: hdf1 hdf2 hdg:<6> [PTBL] [5606/255/63] hdg1 hdg2 hdi: hdi1 hdi2 hdk: hdk1 hdk2 SCSI subsystem driver Revision: 1.00 sym53c8xx: at PCI bus 0, device 11, function 0 sym53c8xx: setting PCI_COMMAND_PARITY...(fix-up) sym53c8xx: 53c860 detected sym53c860-0: rev 0x13 on pci bus 0 device 11 function 0 irq 10 sym53c860-0: ID 7, Fast-20, Parity Checking scsi0 : sym53c8xx-1.7.3c-20010512 Vendor: TOSHIBA Model: DVD-ROM SD-M1401 Rev: 1007 Type: CD-ROM ANSI SCSI revision: 02 Vendor: PLEXTOR Model: CD-ROM PX-32TS Rev: 1.02 Type: CD-ROM ANSI SCSI revision: 02 Vendor: YAMAHA Model: CRW2100S Rev: 1.0N Type: CD-ROM ANSI SCSI revision: 02 scsi1 : SCSI host adapter emulation for IDE ATAPI devices Vendor: LITE-ON Model: LTR-40125W Rev: WS05 Type: CD-ROM ANSI SCSI revision: 02 Attached scsi CD-ROM sr0 at scsi0, channel 0, id 1, lun 0 Attached scsi CD-ROM sr1 at scsi0, channel 0, id 2, lun 0 Attached scsi CD-ROM sr2 at scsi0, channel 0, id 5, lun 0 Attached scsi CD-ROM sr3 at scsi1, channel 0, id 0, lun 0 sym53c860-0-<1,*>: FAST-20 SCSI 20.0 MB/s (50.0 ns, offset 8) sr0: scsi3-mmc drive: 40x/40x cd/rw xa/form2 cdda tray Uniform CD-ROM driver Revision: 3.12 sym53c860-0-<2,*>: FAST-20 SCSI 20.0 MB/s (50.0 ns, offset 8) sr1: scsi-1 drive sym53c860-0-<5,*>: FAST-20 SCSI 20.0 MB/s (50.0 ns, offset 7) sr2: scsi3-mmc drive: 40x/40x writer cd/rw xa/form2 cdda tray sr3: scsi3-mmc drive: 247x/48x writer cd/rw xa/form2 cdda tray md: linear personality registered as nr 1 md: raid0 personality registered as nr 2 md: raid1 personality registered as nr 3 md: raid5 personality registered as nr 4 raid5: measuring checksumming speed 8regs : 2163.600 MB/sec 32regs : 965.200 MB/sec pIII_sse : 2747.200 MB/sec pII_mmx : 2602.400 MB/sec p5_mmx : 2755.200 MB/sec raid5: using function: pIII_sse (2747.200 MB/sec) md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27 md: Autodetecting RAID arrays. [events: 00000066] [events: 00000063] [events: 00000066] [events: 00000063] md: autorun ... md: considering hdk2 ... md: adding hdk2 ... md: adding hdi2 ... md: created md1 md: bind md: bind md: running: md: hdk2's event counter: 00000063 md: hdi2's event counter: 00000063 md1: max total readahead window set to 512k md1: 2 data-disks, max readahead per data-disk: 256k raid0: looking at hdi2 raid0: comparing hdi2(7590656) with hdi2(7590656) raid0: END raid0: ==> UNIQUE raid0: 1 zones raid0: looking at hdk2 raid0: comparing hdk2(7590656) with hdi2(7590656) raid0: EQUAL raid0: FINAL 1 zones raid0: zone 0 raid0: checking hdi2 ... contained as device 0 (7590656) is smallest!. raid0: checking hdk2 ... contained as device 1 raid0: zone->nb_dev: 2, size: 15181312 raid0: current zone offset: 7590656 raid0: done. raid0 : md_size is 15181312 blocks. raid0 : conf->smallest->size is 15181312 blocks. raid0 : nb_zone is 1. raid0 : Allocating 8 bytes for hash. md: updating md1 RAID superblock on device md: hdk2 [events: 00000064]<6>(write) hdk2's sb offset: 7590656 md: hdi2 [events: 00000064]<6>(write) hdi2's sb offset: 7590656 md: considering hdk1 ... md: adding hdk1 ... md: adding hdi1 ... md: created md0 md: bind md: bind md: running: md: hdk1's event counter: 00000066 md: hdi1's event counter: 00000066 md0: max total readahead window set to 512k md0: 2 data-disks, max readahead per data-disk: 256k raid0: looking at hdi1 raid0: comparing hdi1(70559872) with hdi1(70559872) raid0: END raid0: ==> UNIQUE raid0: 1 zones raid0: looking at hdk1 raid0: comparing hdk1(70559872) with hdi1(70559872) raid0: EQUAL raid0: FINAL 1 zones raid0: zone 0 raid0: checking hdi1 ... contained as device 0 (70559872) is smallest!. raid0: checking hdk1 ... contained as device 1 raid0: zone->nb_dev: 2, size: 141119744 raid0: current zone offset: 70559872 raid0: done. raid0 : md_size is 141119744 blocks. raid0 : conf->smallest->size is 141119744 blocks. raid0 : nb_zone is 1. raid0 : Allocating 8 bytes for hash. md: updating md0 RAID superblock on device md: hdk1 [events: 00000067]<6>(write) hdk1's sb offset: 70559872 md: hdi1 [events: 00000067]<6>(write) hdi1's sb offset: 70559872 md: ... autorun DONE. NET4: Linux TCP/IP 1.0 for NET4.0 IP Protocols: ICMP, UDP, TCP, IGMP IP: routing cache hash table of 2048 buckets, 32Kbytes TCP: Hash tables configured (established 16384 bind 21845) NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. VFS: Mounted root (ext2 filesystem) readonly. Freeing unused kernel memory: 336k freed Adding Swap: 1574328k swap-space (priority -1) Real Time Clock Driver v1.10e loop: loaded (max 8 devices) Linux agpgart interface v0.99 (c) Jeff Hartmann agpgart: Maximum main memory to use for agp memory: 439M agpgart: Detected Via Apollo Pro 266T chipset agpgart: AGP aperture is 64M @ 0xd0000000 [drm] AGP 0.99 on VIA Apollo Pro 266T @ 0xd0000000 64MB [drm] Initialized mga 3.0.2 20010321 on minor 0 usb.c: registered new driver usbdevfs usb.c: registered new driver hub usb-uhci.c: $Revision: 1.275 $ time 20:20:33 Feb 4 2003 usb-uhci.c: High bandwidth mode enabled usb-uhci.c: USB UHCI at I/O 0xe000, IRQ 5 usb-uhci.c: Detected 2 ports usb.c: new USB bus registered, assigned bus number 1 hub.c: USB hub found hub.c: 2 ports detected usb-uhci.c: USB UHCI at I/O 0xe400, IRQ 5 usb-uhci.c: Detected 2 ports usb.c: new USB bus registered, assigned bus number 2 hub.c: USB hub found hub.c: 2 ports detected usb-uhci.c: USB UHCI at I/O 0xe800, IRQ 5 usb-uhci.c: Detected 2 ports usb.c: new USB bus registered, assigned bus number 3 hub.c: USB hub found hub.c: 2 ports detected usb-uhci.c: v1.275:USB Universal Host Controller Interface driver usb.c: registered new driver usbscanner scanner.c: 0.4.10:USB Scanner Driver Initializing USB Mass Storage driver... usb.c: registered new driver usb-storage USB Mass Storage support registered. NTFS driver v1.1.22 [Flags: R/O MODULE] udf: registering filesystem i2c-core.o: i2c core module i2c-proc.o version 2.6.1 (20010825) Journalled Block Device driver loaded kjournald starting. Commit interval 5 seconds EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,8), internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,10), internal journal EXT3-fs: mounted filesystem with ordered data mode. reiserfs: checking transaction log (device 03:0b) ... Using r5 hash to sort names ReiserFS version 3.6.25 reiserfs: checking transaction log (device 03:0c) ... Using r5 hash to sort names ReiserFS version 3.6.25 reiserfs: checking transaction log (device 09:00) ... Using r5 hash to sort names ReiserFS version 3.6.25 reiserfs: checking transaction log (device 09:01) ... Using r5 hash to sort names ReiserFS version 3.6.25 reiserfs: checking transaction log (device 21:01) ... Using r5 hash to sort names ReiserFS version 3.6.25 reiserfs: checking transaction log (device 21:02) ... Using r5 hash to sort names ReiserFS version 3.6.25 reiserfs: checking transaction log (device 21:41) ... Using r5 hash to sort names ReiserFS version 3.6.25 reiserfs: checking transaction log (device 21:42) ... Using r5 hash to sort names ReiserFS version 3.6.25 eth0: Setting full-duplex based on MII#1 link partner capability of 05e1. -- The Swedish Chef has been assimilated. "Borg borg borg!" GNU/Linux 2.4.21-pre3-ac5 SMP/ReiserFS 2x2339 bogomips load av: 3.22 3.33 2.41 - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/