Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1751366AbbF2NCQ (ORCPT ); Mon, 29 Jun 2015 09:02:16 -0400 Received: from eusmtp01.atmel.com ([212.144.249.242]:2771 "EHLO eusmtp01.atmel.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1753290AbbF2NCD (ORCPT ); Mon, 29 Jun 2015 09:02:03 -0400 Message-ID: <55914189.8030808@atmel.com> Date: Mon, 29 Jun 2015 15:00:57 +0200 From: Nicolas Ferre Organization: atmel User-Agent: Mozilla/5.0 (X11; Linux x86_64; rv:31.0) Gecko/20100101 Thunderbird/31.7.0 MIME-Version: 1.0 To: Cyrille Pitchen , , , , , , , CC: , , , , , , , Subject: Re: [PATCH linux-next v2 2/4] tty/serial: at91: fix some macro definitions to fit coding style References: In-Reply-To: Content-Type: text/plain; charset="windows-1252" Content-Transfer-Encoding: 8bit X-Originating-IP: [10.161.30.18] Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 17683 Lines: 325 Le 11/06/2015 18:20, Cyrille Pitchen a ?crit : > This patch updates macro definitions in atmel_serial.h to fit the > 80 column rule. > > Please note that some deprecated comments such as "[AT91SAM9261 only]" > are removed as the corresponding bits also exist in some later chips. > > The patch also fix macro definitions in atmel_serial.c to replace > (port,v) by (port, v). > > Signed-off-by: Cyrille Pitchen Acked-by: Nicolas Ferre > --- > drivers/tty/serial/atmel_serial.c | 52 +++++----- > include/linux/atmel_serial.h | 204 +++++++++++++++++++------------------- > 2 files changed, 128 insertions(+), 128 deletions(-) > > diff --git a/drivers/tty/serial/atmel_serial.c b/drivers/tty/serial/atmel_serial.c > index 2a8f528..112e74b 100644 > --- a/drivers/tty/serial/atmel_serial.c > +++ b/drivers/tty/serial/atmel_serial.c > @@ -89,35 +89,35 @@ static void atmel_stop_rx(struct uart_port *port); > #define ATMEL_ISR_PASS_LIMIT 256 > > /* UART registers. CR is write-only, hence no GET macro */ > -#define UART_PUT_CR(port,v) __raw_writel(v, (port)->membase + ATMEL_US_CR) > -#define UART_GET_MR(port) __raw_readl((port)->membase + ATMEL_US_MR) > -#define UART_PUT_MR(port,v) __raw_writel(v, (port)->membase + ATMEL_US_MR) > -#define UART_PUT_IER(port,v) __raw_writel(v, (port)->membase + ATMEL_US_IER) > -#define UART_PUT_IDR(port,v) __raw_writel(v, (port)->membase + ATMEL_US_IDR) > -#define UART_GET_IMR(port) __raw_readl((port)->membase + ATMEL_US_IMR) > -#define UART_GET_CSR(port) __raw_readl((port)->membase + ATMEL_US_CSR) > -#define UART_GET_CHAR(port) __raw_readl((port)->membase + ATMEL_US_RHR) > -#define UART_PUT_CHAR(port,v) __raw_writel(v, (port)->membase + ATMEL_US_THR) > -#define UART_GET_BRGR(port) __raw_readl((port)->membase + ATMEL_US_BRGR) > -#define UART_PUT_BRGR(port,v) __raw_writel(v, (port)->membase + ATMEL_US_BRGR) > -#define UART_PUT_RTOR(port,v) __raw_writel(v, (port)->membase + ATMEL_US_RTOR) > -#define UART_PUT_TTGR(port, v) __raw_writel(v, (port)->membase + ATMEL_US_TTGR) > -#define UART_GET_IP_NAME(port) __raw_readl((port)->membase + ATMEL_US_NAME) > -#define UART_GET_IP_VERSION(port) __raw_readl((port)->membase + ATMEL_US_VERSION) > +#define UART_PUT_CR(port, v) __raw_writel(v, (port)->membase + ATMEL_US_CR) > +#define UART_GET_MR(port) __raw_readl((port)->membase + ATMEL_US_MR) > +#define UART_PUT_MR(port, v) __raw_writel(v, (port)->membase + ATMEL_US_MR) > +#define UART_PUT_IER(port, v) __raw_writel(v, (port)->membase + ATMEL_US_IER) > +#define UART_PUT_IDR(port, v) __raw_writel(v, (port)->membase + ATMEL_US_IDR) > +#define UART_GET_IMR(port) __raw_readl((port)->membase + ATMEL_US_IMR) > +#define UART_GET_CSR(port) __raw_readl((port)->membase + ATMEL_US_CSR) > +#define UART_GET_CHAR(port) __raw_readl((port)->membase + ATMEL_US_RHR) > +#define UART_PUT_CHAR(port, v) __raw_writel(v, (port)->membase + ATMEL_US_THR) > +#define UART_GET_BRGR(port) __raw_readl((port)->membase + ATMEL_US_BRGR) > +#define UART_PUT_BRGR(port, v) __raw_writel(v, (port)->membase + ATMEL_US_BRGR) > +#define UART_PUT_RTOR(port, v) __raw_writel(v, (port)->membase + ATMEL_US_RTOR) > +#define UART_PUT_TTGR(port, v) __raw_writel(v, (port)->membase + ATMEL_US_TTGR) > +#define UART_GET_IP_NAME(port) __raw_readl((port)->membase + ATMEL_US_NAME) > +#define UART_GET_IP_VERS(port) __raw_readl((port)->membase + ATMEL_US_VERSION) > > /* PDC registers */ > -#define UART_PUT_PTCR(port,v) __raw_writel(v, (port)->membase + ATMEL_PDC_PTCR) > -#define UART_GET_PTSR(port) __raw_readl((port)->membase + ATMEL_PDC_PTSR) > +#define UART_PUT_PTCR(port, v) __raw_writel(v, (port)->membase + ATMEL_PDC_PTCR) > +#define UART_GET_PTSR(port) __raw_readl((port)->membase + ATMEL_PDC_PTSR) > > -#define UART_PUT_RPR(port,v) __raw_writel(v, (port)->membase + ATMEL_PDC_RPR) > -#define UART_GET_RPR(port) __raw_readl((port)->membase + ATMEL_PDC_RPR) > -#define UART_PUT_RCR(port,v) __raw_writel(v, (port)->membase + ATMEL_PDC_RCR) > -#define UART_PUT_RNPR(port,v) __raw_writel(v, (port)->membase + ATMEL_PDC_RNPR) > -#define UART_PUT_RNCR(port,v) __raw_writel(v, (port)->membase + ATMEL_PDC_RNCR) > +#define UART_PUT_RPR(port, v) __raw_writel(v, (port)->membase + ATMEL_PDC_RPR) > +#define UART_GET_RPR(port) __raw_readl((port)->membase + ATMEL_PDC_RPR) > +#define UART_PUT_RCR(port, v) __raw_writel(v, (port)->membase + ATMEL_PDC_RCR) > +#define UART_PUT_RNPR(port, v) __raw_writel(v, (port)->membase + ATMEL_PDC_RNPR) > +#define UART_PUT_RNCR(port, v) __raw_writel(v, (port)->membase + ATMEL_PDC_RNCR) > > -#define UART_PUT_TPR(port,v) __raw_writel(v, (port)->membase + ATMEL_PDC_TPR) > -#define UART_PUT_TCR(port,v) __raw_writel(v, (port)->membase + ATMEL_PDC_TCR) > -#define UART_GET_TCR(port) __raw_readl((port)->membase + ATMEL_PDC_TCR) > +#define UART_PUT_TPR(port, v) __raw_writel(v, (port)->membase + ATMEL_PDC_TPR) > +#define UART_PUT_TCR(port, v) __raw_writel(v, (port)->membase + ATMEL_PDC_TCR) > +#define UART_GET_TCR(port) __raw_readl((port)->membase + ATMEL_PDC_TCR) > > struct atmel_dma_buffer { > unsigned char *buf; > @@ -1684,7 +1684,7 @@ static void atmel_get_ip_name(struct uart_port *port) > atmel_port->is_usart = false; > } else { > /* fallback for older SoCs: use version field */ > - version = UART_GET_IP_VERSION(port); > + version = UART_GET_IP_VERS(port); > switch (version) { > case 0x302: > case 0x10213: > diff --git a/include/linux/atmel_serial.h b/include/linux/atmel_serial.h > index 00beddf..c384c21 100644 > --- a/include/linux/atmel_serial.h > +++ b/include/linux/atmel_serial.h > @@ -16,115 +16,115 @@ > #ifndef ATMEL_SERIAL_H > #define ATMEL_SERIAL_H > > -#define ATMEL_US_CR 0x00 /* Control Register */ > -#define ATMEL_US_RSTRX (1 << 2) /* Reset Receiver */ > -#define ATMEL_US_RSTTX (1 << 3) /* Reset Transmitter */ > -#define ATMEL_US_RXEN (1 << 4) /* Receiver Enable */ > -#define ATMEL_US_RXDIS (1 << 5) /* Receiver Disable */ > -#define ATMEL_US_TXEN (1 << 6) /* Transmitter Enable */ > -#define ATMEL_US_TXDIS (1 << 7) /* Transmitter Disable */ > -#define ATMEL_US_RSTSTA (1 << 8) /* Reset Status Bits */ > -#define ATMEL_US_STTBRK (1 << 9) /* Start Break */ > -#define ATMEL_US_STPBRK (1 << 10) /* Stop Break */ > -#define ATMEL_US_STTTO (1 << 11) /* Start Time-out */ > -#define ATMEL_US_SENDA (1 << 12) /* Send Address */ > -#define ATMEL_US_RSTIT (1 << 13) /* Reset Iterations */ > -#define ATMEL_US_RSTNACK (1 << 14) /* Reset Non Acknowledge */ > -#define ATMEL_US_RETTO (1 << 15) /* Rearm Time-out */ > -#define ATMEL_US_DTREN (1 << 16) /* Data Terminal Ready Enable [AT91RM9200 only] */ > -#define ATMEL_US_DTRDIS (1 << 17) /* Data Terminal Ready Disable [AT91RM9200 only] */ > -#define ATMEL_US_RTSEN (1 << 18) /* Request To Send Enable */ > -#define ATMEL_US_RTSDIS (1 << 19) /* Request To Send Disable */ > +#define ATMEL_US_CR 0x00 /* Control Register */ > +#define ATMEL_US_RSTRX BIT(2) /* Reset Receiver */ > +#define ATMEL_US_RSTTX BIT(3) /* Reset Transmitter */ > +#define ATMEL_US_RXEN BIT(4) /* Receiver Enable */ > +#define ATMEL_US_RXDIS BIT(5) /* Receiver Disable */ > +#define ATMEL_US_TXEN BIT(6) /* Transmitter Enable */ > +#define ATMEL_US_TXDIS BIT(7) /* Transmitter Disable */ > +#define ATMEL_US_RSTSTA BIT(8) /* Reset Status Bits */ > +#define ATMEL_US_STTBRK BIT(9) /* Start Break */ > +#define ATMEL_US_STPBRK BIT(10) /* Stop Break */ > +#define ATMEL_US_STTTO BIT(11) /* Start Time-out */ > +#define ATMEL_US_SENDA BIT(12) /* Send Address */ > +#define ATMEL_US_RSTIT BIT(13) /* Reset Iterations */ > +#define ATMEL_US_RSTNACK BIT(14) /* Reset Non Acknowledge */ > +#define ATMEL_US_RETTO BIT(15) /* Rearm Time-out */ > +#define ATMEL_US_DTREN BIT(16) /* Data Terminal Ready Enable */ > +#define ATMEL_US_DTRDIS BIT(17) /* Data Terminal Ready Disable */ > +#define ATMEL_US_RTSEN BIT(18) /* Request To Send Enable */ > +#define ATMEL_US_RTSDIS BIT(19) /* Request To Send Disable */ > > -#define ATMEL_US_MR 0x04 /* Mode Register */ > -#define ATMEL_US_USMODE (0xf << 0) /* Mode of the USART */ > -#define ATMEL_US_USMODE_NORMAL 0 > -#define ATMEL_US_USMODE_RS485 1 > -#define ATMEL_US_USMODE_HWHS 2 > -#define ATMEL_US_USMODE_MODEM 3 > -#define ATMEL_US_USMODE_ISO7816_T0 4 > -#define ATMEL_US_USMODE_ISO7816_T1 6 > -#define ATMEL_US_USMODE_IRDA 8 > -#define ATMEL_US_USCLKS (3 << 4) /* Clock Selection */ > -#define ATMEL_US_USCLKS_MCK (0 << 4) > -#define ATMEL_US_USCLKS_MCK_DIV8 (1 << 4) > -#define ATMEL_US_USCLKS_SCK (3 << 4) > -#define ATMEL_US_CHRL (3 << 6) /* Character Length */ > -#define ATMEL_US_CHRL_5 (0 << 6) > -#define ATMEL_US_CHRL_6 (1 << 6) > -#define ATMEL_US_CHRL_7 (2 << 6) > -#define ATMEL_US_CHRL_8 (3 << 6) > -#define ATMEL_US_SYNC (1 << 8) /* Synchronous Mode Select */ > -#define ATMEL_US_PAR (7 << 9) /* Parity Type */ > -#define ATMEL_US_PAR_EVEN (0 << 9) > -#define ATMEL_US_PAR_ODD (1 << 9) > -#define ATMEL_US_PAR_SPACE (2 << 9) > -#define ATMEL_US_PAR_MARK (3 << 9) > -#define ATMEL_US_PAR_NONE (4 << 9) > -#define ATMEL_US_PAR_MULTI_DROP (6 << 9) > -#define ATMEL_US_NBSTOP (3 << 12) /* Number of Stop Bits */ > -#define ATMEL_US_NBSTOP_1 (0 << 12) > -#define ATMEL_US_NBSTOP_1_5 (1 << 12) > -#define ATMEL_US_NBSTOP_2 (2 << 12) > -#define ATMEL_US_CHMODE (3 << 14) /* Channel Mode */ > -#define ATMEL_US_CHMODE_NORMAL (0 << 14) > -#define ATMEL_US_CHMODE_ECHO (1 << 14) > -#define ATMEL_US_CHMODE_LOC_LOOP (2 << 14) > -#define ATMEL_US_CHMODE_REM_LOOP (3 << 14) > -#define ATMEL_US_MSBF (1 << 16) /* Bit Order */ > -#define ATMEL_US_MODE9 (1 << 17) /* 9-bit Character Length */ > -#define ATMEL_US_CLKO (1 << 18) /* Clock Output Select */ > -#define ATMEL_US_OVER (1 << 19) /* Oversampling Mode */ > -#define ATMEL_US_INACK (1 << 20) /* Inhibit Non Acknowledge */ > -#define ATMEL_US_DSNACK (1 << 21) /* Disable Successive NACK */ > -#define ATMEL_US_MAX_ITER (7 << 24) /* Max Iterations */ > -#define ATMEL_US_FILTER (1 << 28) /* Infrared Receive Line Filter */ > +#define ATMEL_US_MR 0x04 /* Mode Register */ > +#define ATMEL_US_USMODE GENMASK(3, 0) /* Mode of the USART */ > +#define ATMEL_US_USMODE_NORMAL 0 > +#define ATMEL_US_USMODE_RS485 1 > +#define ATMEL_US_USMODE_HWHS 2 > +#define ATMEL_US_USMODE_MODEM 3 > +#define ATMEL_US_USMODE_ISO7816_T0 4 > +#define ATMEL_US_USMODE_ISO7816_T1 6 > +#define ATMEL_US_USMODE_IRDA 8 > +#define ATMEL_US_USCLKS GENMASK(5, 4) /* Clock Selection */ > +#define ATMEL_US_USCLKS_MCK (0 << 4) > +#define ATMEL_US_USCLKS_MCK_DIV8 (1 << 4) > +#define ATMEL_US_USCLKS_SCK (3 << 4) > +#define ATMEL_US_CHRL GENMASK(7, 6) /* Character Length */ > +#define ATMEL_US_CHRL_5 (0 << 6) > +#define ATMEL_US_CHRL_6 (1 << 6) > +#define ATMEL_US_CHRL_7 (2 << 6) > +#define ATMEL_US_CHRL_8 (3 << 6) > +#define ATMEL_US_SYNC BIT(8) /* Synchronous Mode Select */ > +#define ATMEL_US_PAR GENMASK(11, 9) /* Parity Type */ > +#define ATMEL_US_PAR_EVEN (0 << 9) > +#define ATMEL_US_PAR_ODD (1 << 9) > +#define ATMEL_US_PAR_SPACE (2 << 9) > +#define ATMEL_US_PAR_MARK (3 << 9) > +#define ATMEL_US_PAR_NONE (4 << 9) > +#define ATMEL_US_PAR_MULTI_DROP (6 << 9) > +#define ATMEL_US_NBSTOP GENMASK(13, 12) /* Number of Stop Bits */ > +#define ATMEL_US_NBSTOP_1 (0 << 12) > +#define ATMEL_US_NBSTOP_1_5 (1 << 12) > +#define ATMEL_US_NBSTOP_2 (2 << 12) > +#define ATMEL_US_CHMODE GENMASK(15, 14) /* Channel Mode */ > +#define ATMEL_US_CHMODE_NORMAL (0 << 14) > +#define ATMEL_US_CHMODE_ECHO (1 << 14) > +#define ATMEL_US_CHMODE_LOC_LOOP (2 << 14) > +#define ATMEL_US_CHMODE_REM_LOOP (3 << 14) > +#define ATMEL_US_MSBF BIT(16) /* Bit Order */ > +#define ATMEL_US_MODE9 BIT(17) /* 9-bit Character Length */ > +#define ATMEL_US_CLKO BIT(18) /* Clock Output Select */ > +#define ATMEL_US_OVER BIT(19) /* Oversampling Mode */ > +#define ATMEL_US_INACK BIT(20) /* Inhibit Non Acknowledge */ > +#define ATMEL_US_DSNACK BIT(21) /* Disable Successive NACK */ > +#define ATMEL_US_MAX_ITER GENMASK(26, 24) /* Max Iterations */ > +#define ATMEL_US_FILTER BIT(28) /* Infrared Receive Line Filter */ > > -#define ATMEL_US_IER 0x08 /* Interrupt Enable Register */ > -#define ATMEL_US_RXRDY (1 << 0) /* Receiver Ready */ > -#define ATMEL_US_TXRDY (1 << 1) /* Transmitter Ready */ > -#define ATMEL_US_RXBRK (1 << 2) /* Break Received / End of Break */ > -#define ATMEL_US_ENDRX (1 << 3) /* End of Receiver Transfer */ > -#define ATMEL_US_ENDTX (1 << 4) /* End of Transmitter Transfer */ > -#define ATMEL_US_OVRE (1 << 5) /* Overrun Error */ > -#define ATMEL_US_FRAME (1 << 6) /* Framing Error */ > -#define ATMEL_US_PARE (1 << 7) /* Parity Error */ > -#define ATMEL_US_TIMEOUT (1 << 8) /* Receiver Time-out */ > -#define ATMEL_US_TXEMPTY (1 << 9) /* Transmitter Empty */ > -#define ATMEL_US_ITERATION (1 << 10) /* Max number of Repetitions Reached */ > -#define ATMEL_US_TXBUFE (1 << 11) /* Transmission Buffer Empty */ > -#define ATMEL_US_RXBUFF (1 << 12) /* Reception Buffer Full */ > -#define ATMEL_US_NACK (1 << 13) /* Non Acknowledge */ > -#define ATMEL_US_RIIC (1 << 16) /* Ring Indicator Input Change [AT91RM9200 only] */ > -#define ATMEL_US_DSRIC (1 << 17) /* Data Set Ready Input Change [AT91RM9200 only] */ > -#define ATMEL_US_DCDIC (1 << 18) /* Data Carrier Detect Input Change [AT91RM9200 only] */ > -#define ATMEL_US_CTSIC (1 << 19) /* Clear to Send Input Change */ > -#define ATMEL_US_RI (1 << 20) /* RI */ > -#define ATMEL_US_DSR (1 << 21) /* DSR */ > -#define ATMEL_US_DCD (1 << 22) /* DCD */ > -#define ATMEL_US_CTS (1 << 23) /* CTS */ > +#define ATMEL_US_IER 0x08 /* Interrupt Enable Register */ > +#define ATMEL_US_RXRDY BIT(0) /* Receiver Ready */ > +#define ATMEL_US_TXRDY BIT(1) /* Transmitter Ready */ > +#define ATMEL_US_RXBRK BIT(2) /* Break Received / End of Break */ > +#define ATMEL_US_ENDRX BIT(3) /* End of Receiver Transfer */ > +#define ATMEL_US_ENDTX BIT(4) /* End of Transmitter Transfer */ > +#define ATMEL_US_OVRE BIT(5) /* Overrun Error */ > +#define ATMEL_US_FRAME BIT(6) /* Framing Error */ > +#define ATMEL_US_PARE BIT(7) /* Parity Error */ > +#define ATMEL_US_TIMEOUT BIT(8) /* Receiver Time-out */ > +#define ATMEL_US_TXEMPTY BIT(9) /* Transmitter Empty */ > +#define ATMEL_US_ITERATION BIT(10) /* Max number of Repetitions Reached */ > +#define ATMEL_US_TXBUFE BIT(11) /* Transmission Buffer Empty */ > +#define ATMEL_US_RXBUFF BIT(12) /* Reception Buffer Full */ > +#define ATMEL_US_NACK BIT(13) /* Non Acknowledge */ > +#define ATMEL_US_RIIC BIT(16) /* Ring Indicator Input Change */ > +#define ATMEL_US_DSRIC BIT(17) /* Data Set Ready Input Change */ > +#define ATMEL_US_DCDIC BIT(18) /* Data Carrier Detect Input Change */ > +#define ATMEL_US_CTSIC BIT(19) /* Clear to Send Input Change */ > +#define ATMEL_US_RI BIT(20) /* RI */ > +#define ATMEL_US_DSR BIT(21) /* DSR */ > +#define ATMEL_US_DCD BIT(22) /* DCD */ > +#define ATMEL_US_CTS BIT(23) /* CTS */ > > -#define ATMEL_US_IDR 0x0c /* Interrupt Disable Register */ > -#define ATMEL_US_IMR 0x10 /* Interrupt Mask Register */ > -#define ATMEL_US_CSR 0x14 /* Channel Status Register */ > -#define ATMEL_US_RHR 0x18 /* Receiver Holding Register */ > -#define ATMEL_US_THR 0x1c /* Transmitter Holding Register */ > -#define ATMEL_US_SYNH (1 << 15) /* Transmit/Receive Sync [AT91SAM9261 only] */ > +#define ATMEL_US_IDR 0x0c /* Interrupt Disable Register */ > +#define ATMEL_US_IMR 0x10 /* Interrupt Mask Register */ > +#define ATMEL_US_CSR 0x14 /* Channel Status Register */ > +#define ATMEL_US_RHR 0x18 /* Receiver Holding Register */ > +#define ATMEL_US_THR 0x1c /* Transmitter Holding Register */ > +#define ATMEL_US_SYNH BIT(15) /* Transmit/Receive Sync */ > > -#define ATMEL_US_BRGR 0x20 /* Baud Rate Generator Register */ > -#define ATMEL_US_CD (0xffff << 0) /* Clock Divider */ > +#define ATMEL_US_BRGR 0x20 /* Baud Rate Generator Register */ > +#define ATMEL_US_CD GENMASK(15, 0) /* Clock Divider */ > > -#define ATMEL_US_RTOR 0x24 /* Receiver Time-out Register */ > -#define ATMEL_US_TO (0xffff << 0) /* Time-out Value */ > +#define ATMEL_US_RTOR 0x24 /* Receiver Time-out Register */ > +#define ATMEL_US_TO GENMASK(15, 0) /* Time-out Value */ > > -#define ATMEL_US_TTGR 0x28 /* Transmitter Timeguard Register */ > -#define ATMEL_US_TG (0xff << 0) /* Timeguard Value */ > +#define ATMEL_US_TTGR 0x28 /* Transmitter Timeguard Register */ > +#define ATMEL_US_TG GENMASK(7, 0) /* Timeguard Value */ > > -#define ATMEL_US_FIDI 0x40 /* FI DI Ratio Register */ > -#define ATMEL_US_NER 0x44 /* Number of Errors Register */ > -#define ATMEL_US_IF 0x4c /* IrDA Filter Register */ > +#define ATMEL_US_FIDI 0x40 /* FI DI Ratio Register */ > +#define ATMEL_US_NER 0x44 /* Number of Errors Register */ > +#define ATMEL_US_IF 0x4c /* IrDA Filter Register */ > > -#define ATMEL_US_NAME 0xf0 /* Ip Name */ > -#define ATMEL_US_VERSION 0xfc /* Ip Version */ > +#define ATMEL_US_NAME 0xf0 /* Ip Name */ > +#define ATMEL_US_VERSION 0xfc /* Ip Version */ > > #endif > -- Nicolas Ferre -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/