Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1754809AbbF3PQf (ORCPT ); Tue, 30 Jun 2015 11:16:35 -0400 Received: from forward4l.mail.yandex.net ([84.201.143.137]:42440 "EHLO forward4l.mail.yandex.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1754128AbbF3PQ1 (ORCPT ); Tue, 30 Jun 2015 11:16:27 -0400 From: Andrew Andrianov To: Pawel Moll , Mark Rutland , "Rafael J. Wysocki" , Daniel Lezcano , Ian Campbell , Kumar Gala , Russell King , Arnd Bergmann , Rob Herring Cc: Andrew Andrianov , Pavel Shevchenko , Andrew Andrianov , linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org Subject: [PATCH v2 1/5] ARM: rcm-k1879xb1: Add support for K1879XB1 SoC Date: Tue, 30 Jun 2015 18:15:03 +0300 Message-Id: <1435677307-6526-2-git-send-email-andrew@ncrmnt.org> X-Mailer: git-send-email 2.1.4 In-Reply-To: <1435677307-6526-1-git-send-email-andrew@ncrmnt.org> References: <1435677307-6526-1-git-send-email-andrew@ncrmnt.org> Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 9208 Lines: 300 This patch adds basic support for RC Module's K1879XB1YA SoC. K1879XB1YA is a hybrid SoC with one ARM1176JZF-S core running linux and one NeuroMatrix DSP core. http://www.module.ru/en/catalog/micro/mikroshema_dekodera_cifrovogo_televizionnogo_signala_sbis_k1879hb1ya/ http://www.module.ru/en/catalog/micro/micro_pc/ Signed-off-by: Andrew Andrianov --- arch/arm/Kconfig | 2 + arch/arm/Kconfig.debug | 3 +- arch/arm/Makefile | 1 + arch/arm/mach-rcm-k1879xb1/Kconfig | 10 +++ arch/arm/mach-rcm-k1879xb1/Makefile | 2 + arch/arm/mach-rcm-k1879xb1/board-dt.c | 146 ++++++++++++++++++++++++++++++++++ arch/arm/mach-rcm-k1879xb1/hardware.h | 48 +++++++++++ 7 files changed, 211 insertions(+), 1 deletion(-) create mode 100644 arch/arm/mach-rcm-k1879xb1/Kconfig create mode 100644 arch/arm/mach-rcm-k1879xb1/Makefile create mode 100644 arch/arm/mach-rcm-k1879xb1/board-dt.c create mode 100644 arch/arm/mach-rcm-k1879xb1/hardware.h diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 45df48b..ca38bcf 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -906,6 +906,8 @@ source "arch/arm/mach-mmp/Kconfig" source "arch/arm/mach-qcom/Kconfig" +source "arch/arm/mach-rcm-k1879xb1/Kconfig" + source "arch/arm/mach-realview/Kconfig" source "arch/arm/mach-rockchip/Kconfig" diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug index 0c12ffb..efcb7fc 100644 --- a/arch/arm/Kconfig.debug +++ b/arch/arm/Kconfig.debug @@ -1318,7 +1318,8 @@ config DEBUG_UART_8250 (FOOTBRIDGE && !DEBUG_DC21285_PORT) || \ ARCH_GEMINI || ARCH_IOP13XX || ARCH_IOP32X || \ ARCH_IOP33X || ARCH_IXP4XX || \ - ARCH_LPC32XX || ARCH_MV78XX0 || ARCH_ORION5X || ARCH_RPC + ARCH_LPC32XX || ARCH_MV78XX0 || ARCH_ORION5X || ARCH_RPC || \ + ARCH_RCM_K1879XB1 # Compatibility options for BCM63xx config DEBUG_UART_BCM63XX diff --git a/arch/arm/Makefile b/arch/arm/Makefile index 985227c..f3352ee 100644 --- a/arch/arm/Makefile +++ b/arch/arm/Makefile @@ -185,6 +185,7 @@ machine-$(CONFIG_ARCH_ORION5X) += orion5x machine-$(CONFIG_ARCH_PICOXCELL) += picoxcell machine-$(CONFIG_ARCH_PXA) += pxa machine-$(CONFIG_ARCH_QCOM) += qcom +machine-$(CONFIG_ARCH_RCM_K1879XB1) += rcm-k1879xb1 machine-$(CONFIG_ARCH_REALVIEW) += realview machine-$(CONFIG_ARCH_ROCKCHIP) += rockchip machine-$(CONFIG_ARCH_RPC) += rpc diff --git a/arch/arm/mach-rcm-k1879xb1/Kconfig b/arch/arm/mach-rcm-k1879xb1/Kconfig new file mode 100644 index 0000000..3defee0 --- /dev/null +++ b/arch/arm/mach-rcm-k1879xb1/Kconfig @@ -0,0 +1,10 @@ +menuconfig ARCH_RCM_K1879XB1 + bool "RC Module K1879XB1YA" + depends on MMU + depends on ARCH_MULTI_V6 + select CPU_V6 + select ARM_TIMER_SP804 + select ARM_VIC + select ARM_AMBA + help + Support for RC Module's K1879X SoCs diff --git a/arch/arm/mach-rcm-k1879xb1/Makefile b/arch/arm/mach-rcm-k1879xb1/Makefile new file mode 100644 index 0000000..c28fc14 --- /dev/null +++ b/arch/arm/mach-rcm-k1879xb1/Makefile @@ -0,0 +1,2 @@ +obj-y += board-dt.o + diff --git a/arch/arm/mach-rcm-k1879xb1/board-dt.c b/arch/arm/mach-rcm-k1879xb1/board-dt.c new file mode 100644 index 0000000..48d3835 --- /dev/null +++ b/arch/arm/mach-rcm-k1879xb1/board-dt.c @@ -0,0 +1,145 @@ +/* + * arch/arm/mach-rcm-k1879/board-dt.c + * + * Copyright (C) 2011-2015 RC Module + * + * Sergey Mironov + * Andrew Andrianov + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include +#include +#include +#include +#include +#include "hardware.h" + +static void __iomem *k1879_mif; +static void __iomem *k1879_wdt; + +static void __iomem *k1879_mif_base(void) +{ + BUG_ON(!k1879_mif); + return k1879_mif; +} + +static void __iomem *k1879_sctl_base(void) +{ + return (void __iomem *)RCM_K1879_SCTL_VIRT_BASE; +} + +static void k1879_level_irq_i2c0_fixup(unsigned int irq, struct irq_desc *desc) +{ + writel(1, k1879_mif_base() + RCM_K1879_MIF_I2C_INT_STAT); + handle_level_irq(irq, desc); +} + +static void k1879_level_irq_i2c1_fixup(unsigned int irq, struct irq_desc *desc) +{ + writel(1 << 0, k1879_sctl_base() + RCM_K1879_SCTL_INT_P_OUT); + handle_level_irq(irq, desc); +} + +static void k1879_level_irq_i2c2_fixup(unsigned int irq, struct irq_desc *desc) +{ + writel(1 << 1, k1879_sctl_base() + RCM_K1879_SCTL_INT_P_OUT); + handle_level_irq(irq, desc); +} + +static void k1879_level_irq_i2c3_fixup(unsigned int irq, struct irq_desc *desc) +{ + writel(1 << 2, k1879_sctl_base() + RCM_K1879_SCTL_INT_P_OUT); + handle_level_irq(irq, desc); +} + +static void (*k1879_i2c_fixups[])(unsigned int irq, struct irq_desc *desc) = { + k1879_level_irq_i2c0_fixup, + k1879_level_irq_i2c1_fixup, + k1879_level_irq_i2c2_fixup, + k1879_level_irq_i2c3_fixup +}; + +static void __init setup_i2c_fixups(void) +{ + struct device_node *np; + int irq; + u32 fixup_id = -1; + + for_each_compatible_node(np, NULL, "rcm,i2c-ocores") { + int ret = of_property_read_u32(np, "rcm-irq-fixup-id", + &fixup_id); + + if (ret) { + pr_warn("k1879xb1: rcm-irq-fixup-id invalid: %d\n", + ret); + continue; + } + if (fixup_id >= ARRAY_SIZE(k1879_i2c_fixups)) { + pr_warn("k1879xb1: rcm-irq-fixup-id %d too big\n", + fixup_id); + continue; + } + irq = of_irq_get(np, 0); + irq_set_handler(irq, k1879_i2c_fixups[fixup_id]); + } +} + +static void __init k1879_dt_mach_init(void) +{ + struct device_node *np; + + of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL); + k1879_mif = ioremap(RCM_K1879_MIF_PHYS_BASE, + RCM_K1879_MIF_SIZE); + BUG_ON(!k1879_mif); + + np = of_find_compatible_node(NULL, NULL, "arm,sp805"); + WARN_ON(!np); + if (np) + k1879_wdt = of_iomap(np, 0); + + /* Setup i2c interrupt fixups */ + setup_i2c_fixups(); + + /* I2C0 (Internal, HDMI) needs some extra love */ + do { + void __iomem *mif; + + mif = k1879_mif_base(); + writel(1, mif + RCM_K1879_MIF_I2C_INT_TYPE_ENA); + writel(1, mif + RCM_K1879_MIF_I2C_INT_TYPE); + writel(1, mif + RCM_K1879_MIF_I2C_INT_ENA); + } while (0); +} + +static void k1879_restart(enum reboot_mode mode, const char *cmd) +{ + /* The recommended way to do a soft-reboot on this platform + is write directly to watchdog registers and cause an immediate + watchdog restart + */ + + if (!k1879_wdt) { + pr_err("k1879xb1: WDT regs were not properly mapped - reboot manually\n"); + return; + } + iowrite32(1, (k1879_wdt + 0xf00)); + iowrite32(1, (k1879_wdt + 0xf04)); + /* Goodbye! */ +} + +static const char * const k1879_dt_match[] = { + "rcm,mb7707", + "rcm,k1879xb1ya", + NULL +}; + +DT_MACHINE_START(K1879, "RC Module K1879XB1YA (Device Tree)") + .init_machine = k1879_dt_mach_init, + .dt_compat = k1879_dt_match, + .restart = k1879_restart +MACHINE_END diff --git a/arch/arm/mach-rcm-k1879xb1/hardware.h b/arch/arm/mach-rcm-k1879xb1/hardware.h new file mode 100644 index 0000000..2977ed7 --- /dev/null +++ b/arch/arm/mach-rcm-k1879xb1/hardware.h @@ -0,0 +1,48 @@ +/* + * arch/arm/mach-rcm-k1879/board-dt.c + * + * Copyright (C) 2011-2015 RC Module + * + * Sergey Mironov + * Andrew Andrianov + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#ifndef HARDWARE_H +#define HARDWARE_H + +/* + * This is the bare minimum required for arch code only. + * The rest comes from DeviceTree + */ + +#define RCM_K1879_PHYS(bus, off) (RCM_K1879_##bus##_PHYS_BASE + (off)) +#define RCM_K1879_VIRT(bus, off) (RCM_K1879_##bus##_VIRT_BASE + (off)) + +/* Areas of system memory space */ +#define RCM_K1879_AREA0_PHYS_BASE 0x20000000 +#define RCM_K1879_AREA0_SIZE SZ_512K +#define RCM_K1879_AREA0_VIRT_BASE 0xf8000000 + +#define RCM_K1879_AREA1_PHYS_BASE 0x80000000 +#define RCM_K1879_AREA1_SIZE SZ_2M +#define RCM_K1879_AREA1_VIRT_BASE 0xf8100000 + +#define RCM_K1879_SCTL_OFF 0x0003c000 +#define RCM_K1879_SCTL_PHYS_BASE RCM_K1879_PHYS(AREA0, RCM_K1879_SCTL_OFF) +#define RCM_K1879_SCTL_VIRT_BASE RCM_K1879_VIRT(AREA0, RCM_K1879_SCTL_OFF) +#define RCM_K1879_SCTL_SIZE 0x1000 + +#define RCM_K1879_MIF_OFF 0x00172000 +#define RCM_K1879_MIF_PHYS_BASE RCM_K1879_PHYS(AREA1, RCM_K1879_MIF_OFF) +#define RCM_K1879_MIF_SIZE 0x100 + +#define RCM_K1879_MIF_I2C_INT_TYPE_ENA 0x94 +#define RCM_K1879_MIF_I2C_INT_TYPE 0x98 +#define RCM_K1879_MIF_I2C_INT_ENA 0x9C +#define RCM_K1879_MIF_I2C_INT_STAT 0xA0 +#define RCM_K1879_SCTL_INT_P_OUT 0x08 + +#endif -- 2.1.4 -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/