Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1753702AbbGBTJD (ORCPT ); Thu, 2 Jul 2015 15:09:03 -0400 Received: from mail-yk0-f169.google.com ([209.85.160.169]:36132 "EHLO mail-yk0-f169.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1753511AbbGBTIw convert rfc822-to-8bit (ORCPT ); Thu, 2 Jul 2015 15:08:52 -0400 MIME-Version: 1.0 In-Reply-To: References: <1435520786-31867-1-git-send-email-marek@goldelico.com> <1435520786-31867-2-git-send-email-marek@goldelico.com> From: Rob Herring Date: Thu, 2 Jul 2015 14:08:31 -0500 Message-ID: Subject: Re: [PATCH RFC v2 1/3] tty: serial core: provide method to search uart by phandle To: "Dr. H. Nikolaus Schaller" Cc: Marek Belisko , Jiri Slaby , Greg Kroah-Hartman , Arnd Bergmann , Peter Hurley , Mark Rutland , One Thousand Gnomes , Sebastian Reichel , Neil Brown , Grant Likely , "linux-kernel@vger.kernel.org" , "linux-serial@vger.kernel.org" , Rob Herring , Pawel Moll Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8BIT Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 9024 Lines: 217 On Wed, Jul 1, 2015 at 2:07 PM, Dr. H. Nikolaus Schaller wrote: > Hi, > > Am 01.07.2015 um 20:16 schrieb Rob Herring : > >> On Sun, Jun 28, 2015 at 2:46 PM, Marek Belisko wrote: >>> From: "H. Nikolaus Schaller" >>> >>> 1. add registered uart_ports to a search list >>> 2. provide a function to search an uart_port by phandle. This copies the >>> mechanism how devm_usb_get_phy_by_phandle() works >> >> How does this relate to Neil's tty/uart slaves series? > > we had questioned the approach of interpreting uarts as a degenerated single-client > bus and therefore handling uart slave devices by subnodes. > > Rather than having a „UART n is connected to device“ subnode, we think that a > „this device is connected to UART n“ phandle is the most elegant and flexible > way to implement it. Like it is for PHY relations within the USB subsystem. PHYs are typically a bit different in that they already have parent/child relationship with MMIO registers which is the primary hierarchy in DT. There's no reason we can't support both cases, but I'm not yet convinced we have a need yet for both. The parent/child approach is simpler to deal with probe ordering issues as the children can be enumerated when the parent has completed enumeration. We should use the DT hierarchy when possible rather than just sticking everything at the top level. > After a long theoretical discussion we were asked to submit code to better allow > to compare both approaches. What discussion? I don't recall seeing anything related to the binding part. I've not looked closely at the kernel implementations which I guess are where the major differences are. It would be helpful to have some summary comparing the options. The only clue I had that you had looked at Neil's version is he is cc'ed here. > > Here it is. > > So common is the problem that we want to solve. Different is the solution. > > Both implementations are tested to work on the GTA04 hardware. > >> >>> Signed-off-by: H. Nikolaus Schaller >>> Signed-off-by: Marek Belisko >>> --- >>> Documentation/serial/slaves.txt | 36 ++++++++++++++ >> >> You need to split this into DT binding and whatever kernel specific >> documentation you want. My comment below apply to what goes in the >> binding doc. > > This driver does not define any specific bindings for the slave device, therefore > we have not provided a bindings document. It is up to the slave driver to provide > one. Then where is the property "uart" documented? That is a specific binding like clock or gpio bindings. Bindings for uart slaves is something that should be defined generically. That is not something that should be or has any benefit of being defined per device. > This driver just provides means that a slave driver can interact with the tty/serial > driver. > > Bindings for a specific slave device are defined in our > [PATCH RFC v2 3/3] misc: Add w2g0004 gps receiver driver > ../devicetree/bindings/misc/wi2wi,w2sg0004.txt Right, and that needs to refer to a common binding doc. Simply put, I will reject describing any UART devices in DT until that happens. >>> drivers/tty/serial/serial_core.c | 103 +++++++++++++++++++++++++++++++++++++++ >>> include/linux/serial_core.h | 10 ++++ >>> 3 files changed, 149 insertions(+) >>> create mode 100644 Documentation/serial/slaves.txt >>> >>> diff --git a/Documentation/serial/slaves.txt b/Documentation/serial/slaves.txt >>> new file mode 100644 >>> index 0000000..6f8d44d >>> --- /dev/null >>> +++ b/Documentation/serial/slaves.txt >>> @@ -0,0 +1,36 @@ >>> +UART slave device support >>> + >>> +A remote device connected to a RS232 interface is usually power controlled by the DTR line. >>> +The DTR line is managed automatically by the UART driver for open() and close() syscalls >>> +and on demand by tcsetattr(). >>> + >>> +With embedded devices, the serial peripheral might be directly and always connected to the UART >>> +and there might be no physical DTR line involved. Power control (on/off) has to be done by some >>> +chip specific device driver (which we call "UART slave") through some mechanisms (I2C, GPIOs etc.) >>> +not related to the serial interface. Some devices do not explicitly tell their power state except >>> +by sending or not sending data to the UART. In such a case the device driver must be able to monitor >>> +data activity. The role of the device driver is to encapsulate such power control in a single place. >>> + >>> +This patch series allows to support such drivers by providing: >>> +* a mechanism that a slave driver can identify the UART instance it is connected to >>> +* a mechanism that UART slave drivers can register to be notified >>> +* notfications for DTR (and other modem control) state changes >> >> This has nothing to do with the binding really, but is rather a Linux >> driver feature. > > Yes, we want to describe the linux driver features here. > >> >>> +* notifications that the UART has received some data from the UART >>> + >>> +A slave device simply adds a phandle reference to the UART it is connected to, e.g. >> >> By default I think this should be a sub-node of the uart. > > We want to show with this implementation that uart-subnodes would be the wrong > way to go. > >> There are >> more complicated cases of combo devices which we may need to support >> with phandles, but by default we should use sub-nodes to describe >> connections. > > There can be serial devices which are power-controlled by I2C and then > we would have a problem to describe the connection as both I2C and UART > subnodes. Sure, and I would agree that under I2C is the right place in that case. However, that does not appear to be the case for the device you care about. > For us the "main interface“ of a chip is the one that allows to turn the device > on and off. And not the one that carries data provided by/to user space („payload“). For nearly everything else in DT, that is not the case. > > This is rarely the serial data stream. Hence describing the subdevice by a > subnode of the uart is describing something different from what we need. > >> >>> + >>> + gps { >>> + compatible = "wi2wi,w2sg0004"; >>> + uart = <&uart1>; >> >> What if you have a device with 2 uart connections? Do you have 2 items >> in the list or do multiple "-uart" entries? The former is >> probably sufficient and easier to parse. > > It is up to the subdevice driver how it is implemented. So view this as an example > that has only one uart connection. > > For two uart connections you can choose either of your proposals since the translatori > function has both a phandle node name and an index. Yes, either will work and we have examples of both styles in DT. We just have to pick one and document that is my point. We should not leave it up to each device. >> devm_serial_get_uart_by_phandle(struct device *dev, >> + const char *phandle, u8 index) > > > You can call this function twice as: > >> uart1 = devm_serial_get_uart_by_phandle(dev, „uart“, 0) >> uart2 = devm_serial_get_uart_by_phandle(dev, „uart“, 1) > > or > >> uart1 = devm_serial_get_uart_by_phandle(dev, „uart1“, 0) >> uart2 = devm_serial_get_uart_by_phandle(dev, „uart2“, 0) > > whatever better fits. But this is up to the device driver where it IMHO belongs to. > > Our serial core driver does not predefine anything. It just provides a mechanism > that a driver can translate phandles into struct uart. > > What we should do is to mark this DT fragment in this driver documentation as > an example to avoid misinterpretations. > >> >>> + }; >>> + >>> +The slave driver calls devm_serial_get_uart_by_phandle() to identify the uart driver. >>> +This API follows the concept of devm_usb_get_phy_by_phandle(). >>> + >>> +A slave device driver registers itself with serial_register_slave() to receive notifications. >>> +Notification handler callbacks can be registered by serial_register_mctrl_notification() and >>> +serial_register_rx_notification(). If an UART has registered a NULL slave or a NULL handler, >>> +no notifications are sent. >>> + >>> +RX notification handlers can define a ktermios during setup and the handler function can modify >>> +or decide to throw away each character that is passed upwards. >> >> All these 3 paragraphs should not be in the binding doc. > > Maybe you have compared too much with Neil’s implementation. > > This is not a binding doc, but a description/documentation of our proposed extension > of the serial core driver. As I've mentioned, you need a binding doc. You can have this part too, just not in the binding doc. Rob -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/