Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id ; Thu, 6 Feb 2003 13:03:24 -0500 Received: (majordomo@vger.kernel.org) by vger.kernel.org id ; Thu, 6 Feb 2003 13:03:24 -0500 Received: from node181b.a2000.nl ([62.108.24.27]:16775 "EHLO ddx.a2000.nu") by vger.kernel.org with ESMTP id ; Thu, 6 Feb 2003 13:03:23 -0500 Date: Thu, 6 Feb 2003 19:12:41 +0100 (CET) From: Stephan van Hienen To: AU cc: Hans-Peter Jansen , Shawn Evans , linux-raid@vger.kernel.org, Andre Hedrick , linux-kernel@vger.kernel.org Subject: Re: Promise FastTrak TX4 losing interrupts (with apic mode) In-Reply-To: Message-ID: References: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 1000 Lines: 29 On Thu, 6 Feb 2003, AU wrote: > Try to boot with apic=no or acpi=oldboot like i do now with append noapic, it works ok did some more tests today : plugged the fasttrak tx4 into 3 different machines all smp (dual p3/dual p2/dual xeon) with all i get lost interrupts if i boot with noapic problem is solved (tried updating the bios for the promise, but doesn't help) looks like there is really something wrong with the (bios?) tx4 i have 3 of these cards here putting 2 together in an mainbord also doesn't work (then the tx4 bios is complaining about no assigned irq) and if i use 1 card in a system, i always have to press 'esc' to continu after the bios tells me there is no array i really think i should have bought the highpoint 4 port cards :( - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/