Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S932197AbbGCOR3 (ORCPT ); Fri, 3 Jul 2015 10:17:29 -0400 Received: from eusmtp01.atmel.com ([212.144.249.243]:18250 "EHLO eusmtp01.atmel.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1754989AbbGCORO (ORCPT ); Fri, 3 Jul 2015 10:17:14 -0400 From: Ludovic Desroches To: , , CC: , , , Ludovic Desroches Subject: [PATCH 2/3] mmc: sdhci-of-at91: introduce driver for the Atmel SDMMC Date: Fri, 3 Jul 2015 16:17:16 +0200 Message-ID: <1435933037-12889-3-git-send-email-ludovic.desroches@atmel.com> X-Mailer: git-send-email 2.2.0 In-Reply-To: <1435933037-12889-1-git-send-email-ludovic.desroches@atmel.com> References: <1435933037-12889-1-git-send-email-ludovic.desroches@atmel.com> MIME-Version: 1.0 Content-Type: text/plain Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 8534 Lines: 273 Introduce driver for he Atmel SDMMC available on sama5d2. It is a sdhci compliant controller. Signed-off-by: Ludovic Desroches --- .../devicetree/bindings/mmc/sdhci-atmel.txt | 21 +++ drivers/mmc/host/Kconfig | 8 + drivers/mmc/host/Makefile | 1 + drivers/mmc/host/sdhci-of-at91.c | 188 +++++++++++++++++++++ 4 files changed, 218 insertions(+) create mode 100644 Documentation/devicetree/bindings/mmc/sdhci-atmel.txt create mode 100644 drivers/mmc/host/sdhci-of-at91.c diff --git a/Documentation/devicetree/bindings/mmc/sdhci-atmel.txt b/Documentation/devicetree/bindings/mmc/sdhci-atmel.txt new file mode 100644 index 0000000..1b662d7 --- /dev/null +++ b/Documentation/devicetree/bindings/mmc/sdhci-atmel.txt @@ -0,0 +1,21 @@ +* Atmel SDHCI controller + +This file documents the differences between the core properties in +Documentation/devicetree/bindings/mmc/mmc.txt and the properties used by the +sdhci-of-at91 driver. + +Required properties: +- compatible: Must be "atmel,sama5d2-sdhci". +- clocks: Phandlers to the clocks. +- clock-names: Must be "hclock", "multclk", "baseclk"; + + +Example: + +sdmmc0: sdio-host@a0000000 { + compatible = "atmel,sama5d2-sdhci"; + reg = <0xa0000000 0x300>; + interrupts = <31 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&sdmmc0_hclk>, <&sdmmc0_gclk>, <&main>; + clock-names = "hclock", "multclk", "baseclk"; +}; diff --git a/drivers/mmc/host/Kconfig b/drivers/mmc/host/Kconfig index fd9a58e..c1c75e8 100644 --- a/drivers/mmc/host/Kconfig +++ b/drivers/mmc/host/Kconfig @@ -129,6 +129,14 @@ config MMC_SDHCI_OF_ARASAN If unsure, say N. +config MMC_SDHCI_OF_AT91 + tristate "SDHCI OF support for the Atmel SDMMC controller" + depends on MMC_SDHCI_PLTFM + depends on OF + select MMC_SDHCI_IO_ACCESSORS + help + This selects the Atmel SDMMC driver + config MMC_SDHCI_OF_ESDHC tristate "SDHCI OF support for the Freescale eSDHC controller" depends on MMC_SDHCI_PLTFM diff --git a/drivers/mmc/host/Makefile b/drivers/mmc/host/Makefile index e928d61..4f3452a 100644 --- a/drivers/mmc/host/Makefile +++ b/drivers/mmc/host/Makefile @@ -67,6 +67,7 @@ obj-$(CONFIG_MMC_SDHCI_ESDHC_IMX) += sdhci-esdhc-imx.o obj-$(CONFIG_MMC_SDHCI_DOVE) += sdhci-dove.o obj-$(CONFIG_MMC_SDHCI_TEGRA) += sdhci-tegra.o obj-$(CONFIG_MMC_SDHCI_OF_ARASAN) += sdhci-of-arasan.o +obj-$(CONFIG_MMC_SDHCI_OF_AT91) += sdhci-of-at91.o obj-$(CONFIG_MMC_SDHCI_OF_ESDHC) += sdhci-of-esdhc.o obj-$(CONFIG_MMC_SDHCI_OF_HLWD) += sdhci-of-hlwd.o obj-$(CONFIG_MMC_SDHCI_BCM_KONA) += sdhci-bcm-kona.o diff --git a/drivers/mmc/host/sdhci-of-at91.c b/drivers/mmc/host/sdhci-of-at91.c new file mode 100644 index 0000000..2e3716a --- /dev/null +++ b/drivers/mmc/host/sdhci-of-at91.c @@ -0,0 +1,188 @@ +/* + * Atmel SDMMC controller driver. + * + * Copyright (C) 2015 Atmel, + * 2015 Ludovic Desroches + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or (at + * your option) any later version. + */ + +#include +#include +#include +#include +#include +#include +#include + +#include "sdhci-pltfm.h" + +#define SDMMC_CACR 0x230 +#define SDMMC_CACR_CAPWREN BIT(0) +#define SDMMC_CACR_KEY (0x46 << 8) + +struct sdhci_at91_priv { + struct clk *hclock; + struct clk *gck; + struct clk *mainck; +}; + +static const struct sdhci_ops sdhci_at91_sama5d2_ops = { + .set_clock = sdhci_set_clock, + .set_bus_width = sdhci_set_bus_width, + .reset = sdhci_reset, + .set_uhs_signaling = sdhci_set_uhs_signaling, +}; + +static const struct sdhci_pltfm_data soc_data_sama5d2 = { + .ops = &sdhci_at91_sama5d2_ops, +}; + +static const struct of_device_id sdhci_at91_dt_match[] = { + { .compatible = "atmel,sama5d2-sdhci", .data = &soc_data_sama5d2 }, + {} +}; + +static int sdhci_at91_probe(struct platform_device *pdev) +{ + const struct of_device_id *match; + const struct sdhci_pltfm_data *soc_data; + struct sdhci_host *host; + struct sdhci_pltfm_host *pltfm_host; + struct sdhci_at91_priv *priv; + unsigned int caps0, caps1; + unsigned int clk_base, clk_mul; + unsigned int gck_rate, real_gck_rate; + int ret; + + match = of_match_device(sdhci_at91_dt_match, &pdev->dev); + if (!match) + return -EINVAL; + soc_data = match->data; + + priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL); + if (!priv) { + dev_err(&pdev->dev, "unable to allocate private data\n"); + return -ENOMEM; + } + + priv->mainck = devm_clk_get(&pdev->dev, "baseclk"); + if (IS_ERR(priv->mainck)) { + dev_err(&pdev->dev, "failed to get baseclk\n"); + return PTR_ERR(priv->mainck); + } + + priv->hclock = devm_clk_get(&pdev->dev, "hclock"); + if (IS_ERR(priv->hclock)) { + dev_err(&pdev->dev, "failed to get hclock\n"); + return PTR_ERR(priv->hclock); + } + + priv->gck = devm_clk_get(&pdev->dev, "multclk"); + if (IS_ERR(priv->gck)) { + dev_err(&pdev->dev, "failed to get multclk\n"); + return PTR_ERR(priv->gck); + } + + host = sdhci_pltfm_init(pdev, soc_data, 0); + if (IS_ERR(host)) + return PTR_ERR(host); + + /* + * The mult clock is provided by as a generated clock by the PMC + * controller. In order to set the rate of gck, we have to get the + * base clock rate and the clock mult from capabilities. + */ + clk_prepare_enable(priv->hclock); + caps0 = readl(host->ioaddr + SDHCI_CAPABILITIES); + caps1 = readl(host->ioaddr + SDHCI_CAPABILITIES_1); + clk_base = (caps0 & SDHCI_CLOCK_V3_BASE_MASK) >> SDHCI_CLOCK_BASE_SHIFT; + clk_mul = (caps1 & SDHCI_CLOCK_MUL_MASK) >> SDHCI_CLOCK_MUL_SHIFT; + gck_rate = clk_base * 1000000 * (clk_mul + 1); + ret = clk_set_rate(priv->gck, gck_rate); + if (ret < 0) { + dev_err(&pdev->dev, "failed to set gck"); + goto hclock_disable_unprepare; + return -EINVAL; + } + /* + * We need to check if we have the requested rate for gck because in + * some cases this rate could be not supported. If it happens, the rate + * is the closest one gck can provide. We have to update the value + * of clk mul. + */ + real_gck_rate = clk_get_rate(priv->gck); + if (real_gck_rate != gck_rate) { + clk_mul = real_gck_rate / (clk_base * 1000000) - 1; + caps1 &= (~SDHCI_CLOCK_MUL_MASK); + caps1 |= ((clk_mul << SDHCI_CLOCK_MUL_SHIFT) & SDHCI_CLOCK_MUL_MASK); + /* Set capabilities in r/w mode. */ + writel(SDMMC_CACR_KEY | SDMMC_CACR_CAPWREN, host->ioaddr + SDMMC_CACR); + writel(caps1, host->ioaddr + SDHCI_CAPABILITIES_1); + /* Set capabilities in ro mode. */ + writel(0, host->ioaddr + SDMMC_CACR); + dev_info(&pdev->dev, "update clk mul to %u as gck rate is %u Hz\n", + clk_mul, real_gck_rate); + } + + clk_prepare_enable(priv->mainck); + clk_prepare_enable(priv->gck); + + pltfm_host = sdhci_priv(host); + pltfm_host->priv = priv; + + ret = mmc_of_parse(host->mmc); + if (ret) + goto clocks_disable_unprepare; + + sdhci_get_of_property(pdev); + + ret = sdhci_add_host(host); + if (ret) + goto clocks_disable_unprepare; + + return 0; + +clocks_disable_unprepare: + clk_disable_unprepare(priv->gck); + clk_disable_unprepare(priv->mainck); +hclock_disable_unprepare: + clk_disable_unprepare(priv->hclock); + sdhci_pltfm_free(pdev); + return ret; +} + +static int sdhci_at91_remove(struct platform_device *pdev) +{ + struct sdhci_host *host = platform_get_drvdata(pdev); + struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host); + struct sdhci_at91_priv *priv = pltfm_host->priv; + + sdhci_pltfm_unregister(pdev); + + clk_disable_unprepare(priv->gck); + clk_disable_unprepare(priv->hclock); + clk_disable_unprepare(priv->mainck); + + return 0; +} + +static struct platform_driver sdhci_at91_driver = { + .driver = { + .name = "sdhci-at91", + .owner = THIS_MODULE, + .of_match_table = sdhci_at91_dt_match, + .pm = SDHCI_PLTFM_PMOPS, + }, + .probe = sdhci_at91_probe, + .remove = sdhci_at91_remove, +}; + +module_platform_driver(sdhci_at91_driver); + +MODULE_DESCRIPTION("SDHCI driver for at91"); +MODULE_AUTHOR("Ludovic Desroches "); +MODULE_LICENSE("GPL v2"); -- 2.2.0 -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/