Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1759502AbbGHRsC (ORCPT ); Wed, 8 Jul 2015 13:48:02 -0400 Received: from mx2.parallels.com ([199.115.105.18]:55382 "EHLO mx2.parallels.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1758785AbbGHRry (ORCPT ); Wed, 8 Jul 2015 13:47:54 -0400 Date: Wed, 8 Jul 2015 20:47:42 +0300 From: Vladimir Davydov To: Andrew Morton CC: Minchan Kim , Raghavendra K T , Johannes Weiner , Michal Hocko , Greg Thelen , Michel Lespinasse , David Rientjes , Pavel Emelyanov , Cyrill Gorcunov , Jonathan Corbet , , , , , Subject: Re: [PATCH -mm v6 0/6] idle memory tracking Message-ID: <20150708174742.GI2436@esperanza> References: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Disposition: inline In-Reply-To: X-Originating-IP: [10.24.24.221] Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 11154 Lines: 290 Hi, Any comments, thoughts, proposals regarding this patch? Any chance for it to get merged? Thanks, Vladimir On Fri, Jun 12, 2015 at 12:52:20PM +0300, Vladimir Davydov wrote: > Hi, > > This patch set introduces a new user API for tracking user memory pages > that have not been used for a given period of time. The purpose of this > is to provide the userspace with the means of tracking a workload's > working set, i.e. the set of pages that are actively used by the > workload. Knowing the working set size can be useful for partitioning > the system more efficiently, e.g. by tuning memory cgroup limits > appropriately, or for job placement within a compute cluster. > > ---- USE CASES ---- > > The unified cgroup hierarchy has memory.low and memory.high knobs, which > are defined as the low and high boundaries for the workload working set > size. However, the working set size of a workload may be unknown or > change in time. With this patch set, one can periodically estimate the > amount of memory unused by each cgroup and tune their memory.low and > memory.high parameters accordingly, therefore optimizing the overall > memory utilization. > > Another use case is balancing workloads within a compute cluster. > Knowing how much memory is not really used by a workload unit may help > take a more optimal decision when considering migrating the unit to > another node within the cluster. > > Also, as noted by Minchan, this would be useful for per-process reclaim > (https://lwn.net/Articles/545668/). With idle tracking, we could reclaim idle > pages only by smart user memory manager. > > ---- USER API ---- > > The user API consists of two new proc files: > > * /proc/kpageidle. This file implements a bitmap where each bit corresponds > to a page, indexed by PFN. When the bit is set, the corresponding page is > idle. A page is considered idle if it has not been accessed since it was > marked idle. To mark a page idle one should set the bit corresponding to the > page by writing to the file. A value written to the file is OR-ed with the > current bitmap value. Only user memory pages can be marked idle, for other > page types input is silently ignored. Writing to this file beyond max PFN > results in the ENXIO error. Only available when CONFIG_IDLE_PAGE_TRACKING is > set. > > This file can be used to estimate the amount of pages that are not > used by a particular workload as follows: > > 1. mark all pages of interest idle by setting corresponding bits in the > /proc/kpageidle bitmap > 2. wait until the workload accesses its working set > 3. read /proc/kpageidle and count the number of bits set > > * /proc/kpagecgroup. This file contains a 64-bit inode number of the > memory cgroup each page is charged to, indexed by PFN. Only available when > CONFIG_MEMCG is set. > > This file can be used to find all pages (including unmapped file > pages) accounted to a particular cgroup. Using /proc/kpageidle, one > can then estimate the cgroup working set size. > > For an example of using these files for estimating the amount of unused > memory pages per each memory cgroup, please see the script attached > below. > > ---- REASONING ---- > > The reason to introduce the new user API instead of using > /proc/PID/{clear_refs,smaps} is that the latter has two serious > drawbacks: > > - it does not count unmapped file pages > - it affects the reclaimer logic > > The new API attempts to overcome them both. For more details on how it > is achieved, please see the comment to patch 5. > > ---- CHANGE LOG ---- > > Changes in v6: > > - Split the patch introducing page_cgroup_ino helper to ease review. > - Rebase on top of v4.1-rc7-mmotm-2015-06-09-16-55 > > Changes in v5: > > - Fix possible race between kpageidle_clear_pte_refs() and > __page_set_anon_rmap() by checking that a page is on an LRU list > under zone->lru_lock (Minchan). > - Export idle flag via /proc/kpageflags (Minchan). > - Rebase on top of 4.1-rc3. > > Changes in v4: > > This iteration primarily addresses Minchan's comments to v3: > > - Implement /proc/kpageidle as a bitmap instead of using u64 per each page, > because there does not seem to be any future uses for the other 63 bits. > - Do not double-increase pra->referenced in page_referenced_one() if the page > was young and referenced recently. > - Remove the pointless (page_count == 0) check from kpageidle_get_page(). > - Rename kpageidle_clear_refs() to kpageidle_clear_pte_refs(). > - Improve comments to kpageidle-related functions. > - Rebase on top of 4.1-rc2. > > Note it does not address Minchan's concern of possible __page_set_anon_rmap vs > page_referenced race (see https://lkml.org/lkml/2015/5/3/220) since it is still > unclear if this race can really happen (see https://lkml.org/lkml/2015/5/4/160) > > Changes in v3: > > - Enable CONFIG_IDLE_PAGE_TRACKING for 32 bit. Since this feature > requires two extra page flags and there is no space for them on 32 > bit, page ext is used (thanks to Minchan Kim). > - Minor code cleanups and comments improved. > - Rebase on top of 4.1-rc1. > > Changes in v2: > > - The main difference from v1 is the API change. In v1 the user can > only set the idle flag for all pages at once, and for clearing the > Idle flag on pages accessed via page tables /proc/PID/clear_refs > should be used. > The main drawback of the v1 approach, as noted by Minchan, is that on > big machines setting the idle flag for each pages can result in CPU > bursts, which would be especially frustrating if the user only wanted > to estimate the amount of idle pages for a particular process or VMA. > With the new API a more fine-grained approach is possible: one can > read a process's /proc/PID/pagemap and set/check the Idle flag only > for those pages of the process's address space he or she is > interested in. > Another good point about the v2 API is that it is possible to limit > /proc/kpage* scanning rate when the user wants to estimate the total > number of idle pages, which is unachievable with the v1 approach. > - Make /proc/kpagecgroup return the ino of the closest online ancestor > in case the cgroup a page is charged to is offline. > - Fix /proc/PID/clear_refs not clearing Young page flag. > - Rebase on top of v4.0-rc6-mmotm-2015-04-01-14-54 > > v4: https://lkml.org/lkml/2015/5/7/580 > v3: https://lkml.org/lkml/2015/4/28/224 > v2: https://lkml.org/lkml/2015/4/7/260 > v1: https://lkml.org/lkml/2015/3/18/794 > > ---- PATCH SET STRUCTURE ---- > > The patch set is organized as follows: > > - patch 1 adds page_cgroup_ino() helper for the sake of > /proc/kpagecgroup and patches 2-3 do related cleanup > - patch 4 adds /proc/kpagecgroup, which reports cgroup ino each page is > charged to > - patch 5 implements the idle page tracking feature, including the > userspace API, /proc/kpageidle > - patch 6 exports idle flag via /proc/kpageflags > > ---- SIMILAR WORKS ---- > > Originally, the patch for tracking idle memory was proposed back in 2011 > by Michel Lespinasse (see http://lwn.net/Articles/459269/). The main > difference between Michel's patch and this one is that Michel > implemented a kernel space daemon for estimating idle memory size per > cgroup while this patch only provides the userspace with the minimal API > for doing the job, leaving the rest up to the userspace. However, they > both share the same idea of Idle/Young page flags to avoid affecting the > reclaimer logic. > > ---- SCRIPT FOR COUNTING IDLE PAGES PER CGROUP ---- > #! /usr/bin/python > # > > import os > import stat > import errno > import struct > > CGROUP_MOUNT = "/sys/fs/cgroup/memory" > BUFSIZE = 8 * 1024 # must be multiple of 8 > > > def set_idle(): > f = open("/proc/kpageidle", "wb", BUFSIZE) > while True: > try: > f.write(struct.pack("Q", pow(2, 64) - 1)) > except IOError as err: > if err.errno == errno.ENXIO: > break > raise > f.close() > > > def count_idle(): > f_flags = open("/proc/kpageflags", "rb", BUFSIZE) > f_cgroup = open("/proc/kpagecgroup", "rb", BUFSIZE) > f_idle = open("/proc/kpageidle", "rb", BUFSIZE) > > pfn = 0 > nr_idle = {} > while True: > s = f_flags.read(8) > if not s: > break > > flags, = struct.unpack('Q', s) > cgino, = struct.unpack('Q', f_cgroup.read(8)) > > bit = pfn % 64 > if not bit: > idle_bitmap, = struct.unpack('Q', f_idle.read(8)) > > idle = idle_bitmap >> bit & 1 > pfn += 1 > > unevictable = flags >> 18 & 1 > huge = flags >> 22 & 1 > > if idle and not unevictable: > nr_idle[cgino] = nr_idle.get(cgino, 0) + (512 if huge else 1) > > f_flags.close() > f_cgroup.close() > f_idle.close() > return nr_idle > > > print "Setting the idle flag for each page..." > set_idle() > > raw_input("Wait until the workload accesses its working set, then press Enter") > > print "Counting idle pages..." > nr_idle = count_idle() > > for dir, subdirs, files in os.walk(CGROUP_MOUNT): > ino = os.stat(dir)[stat.ST_INO] > print dir + ": " + str(nr_idle.get(ino, 0) * 4) + " KB" > ---- END SCRIPT ---- > > Comments are more than welcome. > > Thanks, > > Vladimir Davydov (6): > memcg: add page_cgroup_ino helper > hwpoison: use page_cgroup_ino for filtering by memcg > memcg: zap try_get_mem_cgroup_from_page > proc: add kpagecgroup file > proc: add kpageidle file > proc: export idle flag via kpageflags > > Documentation/vm/pagemap.txt | 22 +++- > fs/proc/page.c | 234 +++++++++++++++++++++++++++++++++ > fs/proc/task_mmu.c | 4 +- > include/linux/memcontrol.h | 7 +- > include/linux/mm.h | 88 +++++++++++++ > include/linux/page-flags.h | 9 ++ > include/linux/page_ext.h | 4 + > include/uapi/linux/kernel-page-flags.h | 1 + > mm/Kconfig | 12 ++ > mm/debug.c | 4 + > mm/hwpoison-inject.c | 5 +- > mm/memcontrol.c | 71 +++++----- > mm/memory-failure.c | 16 +-- > mm/page_ext.c | 3 + > mm/rmap.c | 8 ++ > mm/swap.c | 2 + > 16 files changed, 428 insertions(+), 62 deletions(-) > > -- > 2.1.4 > > -- > To unsubscribe, send a message with 'unsubscribe linux-mm' in > the body to majordomo@kvack.org. For more info on Linux MM, > see: http://www.linux-mm.org/ . > Don't email: email@kvack.org > -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/