Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1752756AbbGOETN (ORCPT ); Wed, 15 Jul 2015 00:19:13 -0400 Received: from mail-pd0-f179.google.com ([209.85.192.179]:32806 "EHLO mail-pd0-f179.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1751934AbbGOEPi (ORCPT ); Wed, 15 Jul 2015 00:15:38 -0400 From: Juston Li To: sudipm.mukherjee@gmail.com, teddy.wang@siliconmotion.com, gregkh@linuxfoundation.org, devel@driverdev.osuosl.org, linux-fbdev@vger.kernel.org, linux-kernel@vger.kernel.org Cc: Juston Li Subject: [PATCH v5 06/19] staging: sm750fb: add space before open brace Date: Tue, 14 Jul 2015 21:14:35 -0700 Message-Id: <1436933688-5408-6-git-send-email-juston.h.li@gmail.com> X-Mailer: git-send-email 2.4.5 In-Reply-To: References: Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 6991 Lines: 218 Fixes checkpatch.pl error: ERROR: space required before the open brace '{' Signed-off-by: Juston Li --- drivers/staging/sm750fb/ddk750_display.c | 14 +++++++------- drivers/staging/sm750fb/ddk750_mode.c | 8 ++++---- drivers/staging/sm750fb/ddk750_power.c | 4 ++-- drivers/staging/sm750fb/sm750_accel.c | 6 +++--- drivers/staging/sm750fb/sm750_cursor.c | 14 +++++++------- 5 files changed, 23 insertions(+), 23 deletions(-) diff --git a/drivers/staging/sm750fb/ddk750_display.c b/drivers/staging/sm750fb/ddk750_display.c index 973dec3..c7171a4 100644 --- a/drivers/staging/sm750fb/ddk750_display.c +++ b/drivers/staging/sm750fb/ddk750_display.c @@ -132,7 +132,7 @@ static void setDisplayControl(int ctrl, int dispState) static void waitNextVerticalSync(int ctrl, int delay) { unsigned int status; - if (!ctrl){ + if (!ctrl) { /* primary controller */ /* Do not wait when the Primary PLL is off or display control is already off. @@ -166,7 +166,7 @@ static void waitNextVerticalSync(int ctrl, int delay) while (status == SYSTEM_CTRL_PANEL_VSYNC_INACTIVE); } - }else{ + }else { /* Do not wait when the Primary PLL is off or display control is already off. This will prevent the software to wait forever. */ @@ -233,14 +233,14 @@ static void swPanelPowerSequence(int disp, int delay) void ddk750_setLogicalDispOut(disp_output_t output) { unsigned int reg; - if (output & PNL_2_USAGE){ + if (output & PNL_2_USAGE) { /* set panel path controller select */ reg = PEEK32(PANEL_DISPLAY_CTRL); reg = FIELD_VALUE(reg, PANEL_DISPLAY_CTRL, SELECT, (output & PNL_2_MASK)>>PNL_2_OFFSET); POKE32(PANEL_DISPLAY_CTRL, reg); } - if (output & CRT_2_USAGE){ + if (output & CRT_2_USAGE) { /* set crt path controller select */ reg = PEEK32(CRT_DISPLAY_CTRL); reg = FIELD_VALUE(reg, CRT_DISPLAY_CTRL, SELECT, (output & CRT_2_MASK)>>CRT_2_OFFSET); @@ -250,17 +250,17 @@ void ddk750_setLogicalDispOut(disp_output_t output) } - if (output & PRI_TP_USAGE){ + if (output & PRI_TP_USAGE) { /* set primary timing and plane en_bit */ setDisplayControl(0, (output&PRI_TP_MASK)>>PRI_TP_OFFSET); } - if (output & SEC_TP_USAGE){ + if (output & SEC_TP_USAGE) { /* set secondary timing and plane en_bit*/ setDisplayControl(1, (output&SEC_TP_MASK)>>SEC_TP_OFFSET); } - if (output & PNL_SEQ_USAGE){ + if (output & PNL_SEQ_USAGE) { /* set panel sequence */ swPanelPowerSequence((output&PNL_SEQ_MASK)>>PNL_SEQ_OFFSET, 4); } diff --git a/drivers/staging/sm750fb/ddk750_mode.c b/drivers/staging/sm750fb/ddk750_mode.c index cfe528c..efc1fab 100644 --- a/drivers/staging/sm750fb/ddk750_mode.c +++ b/drivers/staging/sm750fb/ddk750_mode.c @@ -107,9 +107,9 @@ static int programModeRegisters(mode_parameter_t *pModeParam, pll_value_t *pll) FIELD_SET(0, CRT_DISPLAY_CTRL, PLANE, ENABLE); - if (getChipType() == SM750LE){ + if (getChipType() == SM750LE) { displayControlAdjust_SM750LE(pModeParam, ulTmpValue); - }else{ + }else { ulReg = PEEK32(CRT_DISPLAY_CTRL) & FIELD_CLEAR(CRT_DISPLAY_CTRL, VSYNC_PHASE) & FIELD_CLEAR(CRT_DISPLAY_CTRL, HSYNC_PHASE) @@ -179,7 +179,7 @@ static int programModeRegisters(mode_parameter_t *pModeParam, pll_value_t *pll) } #endif } - else{ + else { ret = -1; } return ret; @@ -193,7 +193,7 @@ int ddk750_setModeTiming(mode_parameter_t *parm, clock_type_t clock) pll.clockType = clock; uiActualPixelClk = calcPllValue(parm->pixel_clock, &pll); - if (getChipType() == SM750LE){ + if (getChipType() == SM750LE) { /* set graphic mode via IO method */ outb_p(0x88, 0x3d4); outb_p(0x06, 0x3d5); diff --git a/drivers/staging/sm750fb/ddk750_power.c b/drivers/staging/sm750fb/ddk750_power.c index a2d9ee6..e2c0bb3 100644 --- a/drivers/staging/sm750fb/ddk750_power.c +++ b/drivers/staging/sm750fb/ddk750_power.c @@ -5,10 +5,10 @@ void ddk750_setDPMS(DPMS_t state) { unsigned int value; - if (getChipType() == SM750LE){ + if (getChipType() == SM750LE) { value = PEEK32(CRT_DISPLAY_CTRL); POKE32(CRT_DISPLAY_CTRL, FIELD_VALUE(value, CRT_DISPLAY_CTRL, DPMS, state)); - }else{ + }else { value = PEEK32(SYSTEM_CTRL); value= FIELD_VALUE(value, SYSTEM_CTRL, DPMS, state); POKE32(SYSTEM_CTRL, value); diff --git a/drivers/staging/sm750fb/sm750_accel.c b/drivers/staging/sm750fb/sm750_accel.c index 982cf1e..afe73e8 100644 --- a/drivers/staging/sm750fb/sm750_accel.c +++ b/drivers/staging/sm750fb/sm750_accel.c @@ -248,7 +248,7 @@ unsigned int rop2) /* ROP value */ Note that input pitch is BYTE value, but the 2D Pitch register uses pixel values. Need Byte to pixel conversion. */ - if (Bpp == 3){ + if (Bpp == 3) { sx *= 3; dx *= 3; width *= 3; @@ -271,7 +271,7 @@ unsigned int rop2) /* ROP value */ FIELD_VALUE(0, DE_WINDOW_WIDTH, DESTINATION, (dPitch/Bpp)) | FIELD_VALUE(0, DE_WINDOW_WIDTH, SOURCE, (sPitch/Bpp))); /* dpr3c */ - if (accel->de_wait() != 0){ + if (accel->de_wait() != 0) { return -1; } @@ -363,7 +363,7 @@ int hw_imageblit(struct lynx_accel *accel, Note that input pitch is BYTE value, but the 2D Pitch register uses pixel values. Need Byte to pixel conversion. */ - if (bytePerPixel == 3){ + if (bytePerPixel == 3) { dx *= 3; width *= 3; startBit *= 3; diff --git a/drivers/staging/sm750fb/sm750_cursor.c b/drivers/staging/sm750fb/sm750_cursor.c index 95cfb8f..3a21af9 100644 --- a/drivers/staging/sm750fb/sm750_cursor.c +++ b/drivers/staging/sm750fb/sm750_cursor.c @@ -143,14 +143,14 @@ void hw_cursor_setData(struct lynx_cursor *cursor, if (opr & (0x80 >> j)) { /* use fg color,id = 2 */ data |= 2 << (j*2); - }else{ + }else { /* use bg color,id = 1 */ data |= 1 << (j*2); } } #else - for (j=0;j<8;j++){ - if (mask & (0x80>>j)){ + for (j=0;j<8;j++) { + if (mask & (0x80>>j)) { if (rop == ROP_XOR) opr = mask ^ color; else @@ -173,7 +173,7 @@ void hw_cursor_setData(struct lynx_cursor *cursor, /* need a return */ pstart += offset; pbuffer = pstart; - }else{ + }else { pbuffer += sizeof(u16); } @@ -223,13 +223,13 @@ void hw_cursor_setData2(struct lynx_cursor *cursor, if (opr & (0x80 >> j)) { /* use fg color,id = 2 */ data |= 2 << (j*2); - }else{ + }else { /* use bg color,id = 1 */ data |= 1 << (j*2); } } #else - for (j=0;j<8;j++){ + for (j=0;j<8;j++) { if (mask & (1<