Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id ; Tue, 11 Feb 2003 12:27:53 -0500 Received: (majordomo@vger.kernel.org) by vger.kernel.org id ; Tue, 11 Feb 2003 12:27:53 -0500 Received: from ip68-13-105-80.om.om.cox.net ([68.13.105.80]:49541 "EHLO localhost.localdomain") by vger.kernel.org with ESMTP id ; Tue, 11 Feb 2003 12:27:53 -0500 Date: Tue, 11 Feb 2003 11:37:50 -0600 (CST) From: Thomas Molina X-X-Sender: tmolina@localhost.localdomain To: ebuddington@wesleyan.edu cc: linux-kernel@vger.kernel.org Subject: Re: 2.5.60-i386 freezes after decompress on Athlon In-Reply-To: <20030211120033.B27012@ma-northadams1b-418bur.adelphia.net> Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 1181 Lines: 30 On Tue, 11 Feb 2003, Eric Buddington wrote: > 2.5.60, compiled for i386 but running on an Athlon, darn near > everything as modules. > > I get the standard "Uncompressing linux... booting" on boot, then a > hard freeze; no keyboard LED response, no SysRq reboot. > > I tried with acpi=off, same result. > > I initially assumed that console traffic was directed elsewhere, but > VGA console is compiled in and vga=6 specified on the GRUB boot line. > > 2.4.20 works fine on this system, 2.5.58 at least boots. > > I have no idea what to try next. Try making all your input layer as built in rather than modules. Check your console specification. If you have framebuffer support compiled in, make sure you have console on framebuffer enabled also. I've run into something similar-sounding as I've been playing with 2.5.59 and later. It's looking as if people need to be very careful about how they specify console support. - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/