Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1755970AbbGPSTo (ORCPT ); Thu, 16 Jul 2015 14:19:44 -0400 Received: from mail-pa0-f44.google.com ([209.85.220.44]:35380 "EHLO mail-pa0-f44.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1753154AbbGPSTl (ORCPT ); Thu, 16 Jul 2015 14:19:41 -0400 From: Vaibhav Hiremath To: linux-arm-kernel@lists.infradead.org Cc: broonie@kernel.org, lgirdwood@gmail.com, sameo@linux.intel.com, lee.jones@linaro.org, linux-kernel@vger.kernel.org, Vaibhav Hiremath Subject: [PATCH 1/5] regulator: 88pm800: Fix indentation of assignments of data structures Date: Thu, 16 Jul 2015 23:46:54 +0530 Message-Id: <1437070618-21330-2-git-send-email-vaibhav.hiremath@linaro.org> X-Mailer: git-send-email 1.9.1 In-Reply-To: <1437070618-21330-1-git-send-email-vaibhav.hiremath@linaro.org> References: <1437070618-21330-1-git-send-email-vaibhav.hiremath@linaro.org> Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 4372 Lines: 121 This patch makes code more clean from readability point of view, make all assignments of LDO, BUCk and regulator_ops structure at the same indentation. Signed-off-by: Vaibhav Hiremath --- drivers/regulator/88pm800.c | 68 ++++++++++++++++++++++----------------------- 1 file changed, 34 insertions(+), 34 deletions(-) diff --git a/drivers/regulator/88pm800.c b/drivers/regulator/88pm800.c index 832932b..11f7ab2 100644 --- a/drivers/regulator/88pm800.c +++ b/drivers/regulator/88pm800.c @@ -95,11 +95,11 @@ struct pm800_regulators { #define PM800_BUCK(vreg, ereg, ebit, amax, volt_ranges, n_volt) \ { \ .desc = { \ - .name = #vreg, \ - .ops = &pm800_volt_range_ops, \ - .type = REGULATOR_VOLTAGE, \ - .id = PM800_ID_##vreg, \ - .owner = THIS_MODULE, \ + .name = #vreg, \ + .ops = &pm800_volt_range_ops, \ + .type = REGULATOR_VOLTAGE, \ + .id = PM800_ID_##vreg, \ + .owner = THIS_MODULE, \ .n_voltages = n_volt, \ .linear_ranges = volt_ranges, \ .n_linear_ranges = ARRAY_SIZE(volt_ranges), \ @@ -108,7 +108,7 @@ struct pm800_regulators { .enable_reg = PM800_##ereg, \ .enable_mask = 1 << (ebit), \ }, \ - .max_ua = (amax), \ + .max_ua = (amax), \ } /* @@ -123,19 +123,19 @@ struct pm800_regulators { #define PM800_LDO(vreg, ereg, ebit, amax, ldo_volt_table) \ { \ .desc = { \ - .name = #vreg, \ - .ops = &pm800_volt_table_ops, \ - .type = REGULATOR_VOLTAGE, \ - .id = PM800_ID_##vreg, \ - .owner = THIS_MODULE, \ - .n_voltages = ARRAY_SIZE(ldo_volt_table), \ - .vsel_reg = PM800_##vreg##_VOUT, \ - .vsel_mask = 0x1f, \ - .enable_reg = PM800_##ereg, \ - .enable_mask = 1 << (ebit), \ - .volt_table = ldo_volt_table, \ + .name = #vreg, \ + .ops = &pm800_volt_table_ops, \ + .type = REGULATOR_VOLTAGE, \ + .id = PM800_ID_##vreg, \ + .owner = THIS_MODULE, \ + .n_voltages = ARRAY_SIZE(ldo_volt_table), \ + .vsel_reg = PM800_##vreg##_VOUT, \ + .vsel_mask = 0x1f, \ + .enable_reg = PM800_##ereg, \ + .enable_mask = 1 << (ebit), \ + .volt_table = ldo_volt_table, \ }, \ - .max_ua = (amax), \ + .max_ua = (amax), \ } /* Ranges are sorted in ascending order. */ @@ -178,25 +178,25 @@ static int pm800_get_current_limit(struct regulator_dev *rdev) } static struct regulator_ops pm800_volt_range_ops = { - .list_voltage = regulator_list_voltage_linear_range, - .map_voltage = regulator_map_voltage_linear_range, - .set_voltage_sel = regulator_set_voltage_sel_regmap, - .get_voltage_sel = regulator_get_voltage_sel_regmap, - .enable = regulator_enable_regmap, - .disable = regulator_disable_regmap, - .is_enabled = regulator_is_enabled_regmap, - .get_current_limit = pm800_get_current_limit, + .list_voltage = regulator_list_voltage_linear_range, + .map_voltage = regulator_map_voltage_linear_range, + .set_voltage_sel = regulator_set_voltage_sel_regmap, + .get_voltage_sel = regulator_get_voltage_sel_regmap, + .enable = regulator_enable_regmap, + .disable = regulator_disable_regmap, + .is_enabled = regulator_is_enabled_regmap, + .get_current_limit = pm800_get_current_limit, }; static struct regulator_ops pm800_volt_table_ops = { - .list_voltage = regulator_list_voltage_table, - .map_voltage = regulator_map_voltage_iterate, - .set_voltage_sel = regulator_set_voltage_sel_regmap, - .get_voltage_sel = regulator_get_voltage_sel_regmap, - .enable = regulator_enable_regmap, - .disable = regulator_disable_regmap, - .is_enabled = regulator_is_enabled_regmap, - .get_current_limit = pm800_get_current_limit, + .list_voltage = regulator_list_voltage_table, + .map_voltage = regulator_map_voltage_iterate, + .set_voltage_sel = regulator_set_voltage_sel_regmap, + .get_voltage_sel = regulator_get_voltage_sel_regmap, + .enable = regulator_enable_regmap, + .disable = regulator_disable_regmap, + .is_enabled = regulator_is_enabled_regmap, + .get_current_limit = pm800_get_current_limit, }; /* The array is indexed by id(PM800_ID_XXX) */ -- 1.9.1 -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/