Message-ID: <55A8AE19.8020003@de.ibm.com>
Date: Fri, 17 Jul 2015 09:26:17 +0200
From: Christian Borntraeger <borntraeger@de.ibm.com>
User-Agent: Mozilla/5.0 (X11; Linux x86_64; rv:31.0) Gecko/20100101 Thunderbird/31.7.0
MIME-Version: 1.0
To: Yi Min Zhao <zyimin@linux.vnet.ibm.com>
CC: Alex Williamson <alex.williamson@redhat.com>,
        "linux-kernel@vger.kernel.org >> Linux Kernel Mailing List" 
	<linux-kernel@vger.kernel.org>,
        kvm@vger.kernel.org, eric.auger@st.com, eric.auger@linaro.org,
        joro@8bytes.org, avi.kivity@gmail.com, pbonzini@redhat.com,
        feng.wu@intel.com
Subject: Re: [PATCH v2] virt: IRQ bypass manager
References: <20150716211940.6857.32609.stgit@gimli.home>
In-Reply-To: <20150716211940.6857.32609.stgit@gimli.home>
Content-Type: text/plain; charset=utf-8
Content-Transfer-Encoding: 7bit
Sender: linux-kernel-owner@vger.kernel.org
Content-Length: 15194
Lines: 472

Am 16.07.2015 um 23:26 schrieb Alex Williamson:
> When a physical I/O device is assigned to a virtual machine through
> facilities like VFIO and KVM, the interrupt for the device generally
> bounces through the host system before being injected into the VM.
> However, hardware technologies exist that often allow the host to be
> bypassed for some of these scenarios.  Intel Posted Interrupts allow
> the specified physical edge interrupts to be directly injected into a
> guest when delivered to a physical processor while the vCPU is
> running.  ARM IRQ Forwarding allows forwarded physical interrupts to
> be directly deactivated by the guest.
> 
> The IRQ bypass manager here is meant to provide the shim to connect
> interrupt producers, generally the host physical device driver, with
> interrupt consumers, generally the hypervisor, in order to configure
> these bypass mechanism.  To do this, we base the connection on a
> shared, opaque token.  For KVM-VFIO this is expected to be an
> eventfd_ctx since this is the connection we already use to connect an
> eventfd to an irqfd on the in-kernel path.  When a producer and
> consumer with matching tokens is found, callbacks via both registered
> participants allow the bypass facilities to be automatically enabled.
> 
> Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
> ---
> 
> I'm not sure if we're settled on everything, I think Eric is out of
> the office and we haven't really resolved the opaque data element.
> I think it has problems because it assumes which side gets to provide
> the data and implies that the other side knows that the data is
> compatible.  We also don't need to pass it as a callback argument if
> we put it on the consumer/produce struct and consider it public.
> However, I'm posting this to record the current state of this code
> and to make sure I'm not the bottleneck.


Yi Min,

can you have a look if the IRQ passthrough that the pci virtualization
on s390 has would work with this? As far as I can tell, this looks like
we can implement whatever we want in kvm/s390 and this infrastructure
just connects vfio and kvm without assuming anything about the details
but lets double check.


> 
> v2 Makes the rest of the changes suggested by Eric, various comment
> fixes, error paths for the add callbacks, and adds a MAINTAINERS
> entry for virt/lib.  Thanks,
> 
> Alex
> 
>  MAINTAINERS               |    7 +
>  include/linux/irqbypass.h |   90 ++++++++++++++++
>  virt/lib/Kconfig          |    2 
>  virt/lib/Makefile         |    1 
>  virt/lib/irqbypass.c      |  260 +++++++++++++++++++++++++++++++++++++++++++++
>  5 files changed, 360 insertions(+)
>  create mode 100644 include/linux/irqbypass.h
>  create mode 100644 virt/lib/Kconfig
>  create mode 100644 virt/lib/Makefile
>  create mode 100644 virt/lib/irqbypass.c
> 
> diff --git a/MAINTAINERS b/MAINTAINERS
> index d8afd29..8e728cb 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -10613,6 +10613,13 @@ L:	netdev@vger.kernel.org
>  S:	Maintained
>  F:	drivers/net/ethernet/via/via-velocity.*
> 
> +VIRT LIB
> +M:	Alex Williamson <alex.williamson@redhat.com>
> +M:	Paolo Bonzini <pbonzini@redhat.com>
> +L:	kvm@vger.kernel.org
> +S:	Supported
> +F:	virt/lib/
> +
>  VIVID VIRTUAL VIDEO DRIVER
>  M:	Hans Verkuil <hverkuil@xs4all.nl>
>  L:	linux-media@vger.kernel.org
> diff --git a/include/linux/irqbypass.h b/include/linux/irqbypass.h
> new file mode 100644
> index 0000000..fde7b64
> --- /dev/null
> +++ b/include/linux/irqbypass.h
> @@ -0,0 +1,90 @@
> +/*
> + * IRQ offload/bypass manager
> + *
> + * Copyright (C) 2015 Red Hat, Inc.
> + * Copyright (c) 2015 Linaro Ltd.
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + */
> +#ifndef IRQBYPASS_H
> +#define IRQBYPASS_H
> +
> +#include <linux/list.h>
> +
> +struct irq_bypass_consumer;
> +
> +/*
> + * Theory of operation
> + *
> + * The IRQ bypass manager is a simple set of lists and callbacks that allows
> + * IRQ producers (ex. physical interrupt sources) to be matched to IRQ
> + * consumers (ex. virtualization hardware that allows IRQ bypass or offload)
> + * via a shared token (ex. eventfd_ctx).  Producers and consumers register
> + * independently.  When a token match is found, the optional @stop callback
> + * will be called for each participant.  The pair will then be connected via
> + * the @add_* callbacks, and finally the optional @start callback will allow
> + * any final coordination.  When either participant is unregistered, the
> + * process is repeated using the @del_* callbacks in place of the @add_*
> + * callbacks.  Match tokens must be unique per producer/consumer, 1:N pairings
> + * are not supported.
> + */
> +
> +/**
> + * struct irq_bypass_producer - IRQ bypass producer definition
> + * @node: IRQ bypass manager private list management
> + * @token: opaque token to match between producer and consumer
> + * @irq: Linux IRQ number for the producer device
> + * @add_consumer: Connect the IRQ producer to an IRQ consumer
> + * @del_consumer: Disconnect the IRQ producer from an IRQ consumer
> + * @stop: Perform any quiesce operations necessary prior to add/del (optional)
> + * @start: Perform any startup operations necessary after add/del (optional)
> + *
> + * The IRQ bypass producer structure represents an interrupt source for
> + * participation in possible host bypass, for instance an interrupt vector
> + * for a physical device assigned to a VM.
> + */
> +struct irq_bypass_producer {
> +	struct list_head node;
> +	void *token;
> +	int irq;
> +	int (*add_consumer)(struct irq_bypass_producer *,
> +			    struct irq_bypass_consumer *);
> +	void (*del_consumer)(struct irq_bypass_producer *,
> +			     struct irq_bypass_consumer *);
> +	void (*stop)(struct irq_bypass_producer *);
> +	void (*start)(struct irq_bypass_producer *);
> +};
> +
> +/**
> + * struct irq_bypass_consumer - IRQ bypass consumer definition
> + * @node: IRQ bypass manager private list management
> + * @token: opaque token to match between producer and consumer
> + * @add_producer: Connect the IRQ consumer to an IRQ producer
> + * @del_producer: Disconnect the IRQ consumer from an IRQ producer
> + * @stop: Perform any quiesce operations necessary prior to add/del (optional)
> + * @start: Perform any startup operations necessary after add/del (optional)
> + *
> + * The IRQ bypass consumer structure represents an interrupt sink for
> + * participation in possible host bypass, for instance a hypervisor may
> + * support offloads to allow bypassing the host entirely or offload
> + * portions of the interrupt handling to the VM.
> + */
> +struct irq_bypass_consumer {
> +	struct list_head node;
> +	void *token;
> +	int (*add_producer)(struct irq_bypass_consumer *,
> +			    struct irq_bypass_producer *);
> +	void (*del_producer)(struct irq_bypass_consumer *,
> +			     struct irq_bypass_producer *);
> +	void (*stop)(struct irq_bypass_consumer *);
> +	void (*start)(struct irq_bypass_consumer *);
> +};
> +
> +int irq_bypass_register_producer(struct irq_bypass_producer *);
> +void irq_bypass_unregister_producer(struct irq_bypass_producer *);
> +int irq_bypass_register_consumer(struct irq_bypass_consumer *);
> +void irq_bypass_unregister_consumer(struct irq_bypass_consumer *);
> +
> +#endif /* IRQBYPASS_H */
> diff --git a/virt/lib/Kconfig b/virt/lib/Kconfig
> new file mode 100644
> index 0000000..89a414f
> --- /dev/null
> +++ b/virt/lib/Kconfig
> @@ -0,0 +1,2 @@
> +config IRQ_BYPASS_MANAGER
> +	tristate
> diff --git a/virt/lib/Makefile b/virt/lib/Makefile
> new file mode 100644
> index 0000000..901228d
> --- /dev/null
> +++ b/virt/lib/Makefile
> @@ -0,0 +1 @@
> +obj-$(CONFIG_IRQ_BYPASS_MANAGER) += irqbypass.o
> diff --git a/virt/lib/irqbypass.c b/virt/lib/irqbypass.c
> new file mode 100644
> index 0000000..6ae8e0f
> --- /dev/null
> +++ b/virt/lib/irqbypass.c
> @@ -0,0 +1,260 @@
> +/*
> + * IRQ offload/bypass manager
> + *
> + * Copyright (C) 2015 Red Hat, Inc.
> + * Copyright (c) 2015 Linaro Ltd.
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + *
> + * Various virtualization hardware acceleration techniques allow bypassing or
> + * offloading interrupts received from devices around the host kernel.  Posted
> + * Interrupts on Intel VT-d systems can allow interrupts to be received
> + * directly by a virtual machine.  ARM IRQ Forwarding allows forwarded physical
> + * interrupts to be directly deactivated by the guest.  This manager allows
> + * interrupt producers and consumers to find each other to enable this sort of
> + * bypass.
> + */
> +
> +#include <linux/irqbypass.h>
> +#include <linux/list.h>
> +#include <linux/module.h>
> +#include <linux/mutex.h>
> +
> +MODULE_LICENSE("GPL v2");
> +MODULE_DESCRIPTION("IRQ bypass manager utility module");
> +
> +static LIST_HEAD(producers);
> +static LIST_HEAD(consumers);
> +static DEFINE_MUTEX(lock);
> +
> +/* @lock must be held when calling connect */
> +static int __connect(struct irq_bypass_producer *prod,
> +		     struct irq_bypass_consumer *cons)
> +{
> +	int ret;
> +
> +	if (prod->stop)
> +		prod->stop(prod);
> +	if (cons->stop)
> +		cons->stop(cons);
> +
> +	ret = prod->add_consumer(prod, cons);
> +	if (!ret) {
> +		ret = cons->add_producer(cons, prod);
> +		if (ret)
> +			prod->del_consumer(prod, cons);
> +	}
> +
> +	if (cons->start)
> +		cons->start(cons);
> +	if (prod->start)
> +		prod->start(prod);
> +
> +	return ret;
> +}
> +
> +/* @lock must be held when calling disconnect */
> +static void __disconnect(struct irq_bypass_producer *prod,
> +			 struct irq_bypass_consumer *cons)
> +{
> +	if (prod->stop)
> +		prod->stop(prod);
> +	if (cons->stop)
> +		cons->stop(cons);
> +
> +	cons->del_producer(cons, prod);
> +	prod->del_consumer(prod, cons);
> +
> +	if (cons->start)
> +		cons->start(cons);
> +	if (prod->start)
> +		prod->start(prod);
> +}
> +
> +/**
> + * irq_bypass_register_producer - register IRQ bypass producer
> + * @producer: pointer to producer structure
> + *
> + * Add the provided IRQ producer to the list of producers and connect
> + * with any matching token found on the IRQ consumers list.
> + */
> +int irq_bypass_register_producer(struct irq_bypass_producer *producer)
> +{
> +	struct irq_bypass_producer *tmp;
> +	struct irq_bypass_consumer *consumer;
> +	int ret = 0;
> +
> +	if (!producer->add_consumer || !producer->del_consumer)
> +		return -EINVAL;
> +
> +	might_sleep();
> +
> +	if (!try_module_get(THIS_MODULE))
> +		return -ENODEV;
> +
> +	mutex_lock(&lock);
> +
> +	list_for_each_entry(tmp, &producers, node) {
> +		if (tmp->token == producer->token) {
> +			mutex_unlock(&lock);
> +			module_put(THIS_MODULE);
> +			return -EINVAL;
> +		}
> +	}
> +
> +	list_for_each_entry(consumer, &consumers, node) {
> +		if (consumer->token == producer->token) {
> +			ret = __connect(producer, consumer);
> +			break;
> +		}
> +	}
> +
> +	if (!ret)
> +		list_add(&producer->node, &producers);
> +
> +	mutex_unlock(&lock);
> +
> +	if (ret)
> +		module_put(THIS_MODULE);
> +
> +	return ret;
> +}
> +EXPORT_SYMBOL_GPL(irq_bypass_register_producer);
> +
> +/**
> + * irq_bypass_unregister_producer - unregister IRQ bypass producer
> + * @producer: pointer to producer structure
> + *
> + * Remove a previously registered IRQ producer from the list of producers
> + * and disconnect it from any connected IRQ consumer.
> + */
> +void irq_bypass_unregister_producer(struct irq_bypass_producer *producer)
> +{
> +	struct irq_bypass_producer *tmp;
> +	struct irq_bypass_consumer *consumer;
> +
> +	might_sleep();
> +
> +	if (!try_module_get(THIS_MODULE))
> +		return; /* nothing in the list anyway */
> +
> +	mutex_lock(&lock);
> +
> +	list_for_each_entry(tmp, &producers, node) {
> +		if (tmp->token == producer->token)
> +			break;
> +	}
> +
> +	if (tmp) {
> +		list_for_each_entry(consumer, &consumers, node) {
> +			if (consumer->token == producer->token) {
> +				__disconnect(producer, consumer);
> +				break;
> +			}
> +		}
> +
> +		list_del(&producer->node);
> +	}
> +
> +	mutex_unlock(&lock);
> +
> +	module_put(THIS_MODULE);
> +	if (tmp)
> +		module_put(THIS_MODULE);
> +}
> +EXPORT_SYMBOL_GPL(irq_bypass_unregister_producer);
> +
> +/**
> + * irq_bypass_register_consumer - register IRQ bypass consumer
> + * @consumer: pointer to consumer structure
> + *
> + * Add the provided IRQ consumer to the list of consumers and connect
> + * with any matching token found on the IRQ producer list.
> + */
> +int irq_bypass_register_consumer(struct irq_bypass_consumer *consumer)
> +{
> +	struct irq_bypass_consumer *tmp;
> +	struct irq_bypass_producer *producer;
> +	int ret = 0;
> +
> +	if (!consumer->add_producer || !consumer->del_producer)
> +		return -EINVAL;
> +
> +	might_sleep();
> +
> +	if (!try_module_get(THIS_MODULE))
> +		return -ENODEV;
> +
> +	mutex_lock(&lock);
> +
> +	list_for_each_entry(tmp, &consumers, node) {
> +		if (tmp->token == consumer->token) {
> +			mutex_unlock(&lock);
> +			module_put(THIS_MODULE);
> +			return -EINVAL;
> +		}
> +	}
> +
> +	list_for_each_entry(producer, &producers, node) {
> +		if (producer->token == consumer->token) {
> +			ret = __connect(producer, consumer);
> +			break;
> +		}
> +	}
> +
> +	if (!ret)
> +		list_add(&consumer->node, &consumers);
> +
> +	mutex_unlock(&lock);
> +
> +	if (ret)
> +		module_put(THIS_MODULE);
> +
> +	return ret;
> +}
> +EXPORT_SYMBOL_GPL(irq_bypass_register_consumer);
> +
> +/**
> + * irq_bypass_unregister_consumer - unregister IRQ bypass consumer
> + * @consumer: pointer to consumer structure
> + *
> + * Remove a previously registered IRQ consumer from the list of consumers
> + * and disconnect it from any connected IRQ producer.
> + */
> +void irq_bypass_unregister_consumer(struct irq_bypass_consumer *consumer)
> +{
> +	struct irq_bypass_consumer *tmp;
> +	struct irq_bypass_producer *producer;
> +
> +	might_sleep();
> +
> +	if (!try_module_get(THIS_MODULE))
> +		return; /* nothing in the list anyway */
> +
> +	mutex_lock(&lock);
> +
> +	list_for_each_entry(tmp, &consumers, node) {
> +		if (tmp->token == consumer->token)
> +			break;
> +	}
> +
> +	if (tmp) {
> +		list_for_each_entry(producer, &producers, node) {
> +			if (producer->token == consumer->token) {
> +				__disconnect(producer, consumer);
> +				break;
> +			}
> +		}
> +
> +		list_del(&consumer->node);
> +	}
> +
> +	mutex_unlock(&lock);
> +
> +	module_put(THIS_MODULE);
> +	if (tmp)
> +		module_put(THIS_MODULE);
> +}
> +EXPORT_SYMBOL_GPL(irq_bypass_unregister_consumer);
> 
> --
> To unsubscribe from this list: send the line "unsubscribe kvm" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
> 

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/