Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1754732AbbGQU6K (ORCPT ); Fri, 17 Jul 2015 16:58:10 -0400 Received: from devils.ext.ti.com ([198.47.26.153]:36817 "EHLO devils.ext.ti.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1752399AbbGQU5B (ORCPT ); Fri, 17 Jul 2015 16:57:01 -0400 From: Dave Gerlach To: , , , CC: Jassi Brar , Santosh Shilimkar , Suman Anna , Dave Gerlach , Keerthy , Tony Lindgren Subject: [PATCH v2 2/3] Documentation: dt: add bindings for TI Wakeup M3 IPC device Date: Fri, 17 Jul 2015 15:56:31 -0500 Message-ID: <1437166592-25378-3-git-send-email-d-gerlach@ti.com> X-Mailer: git-send-email 2.4.6 In-Reply-To: <1437166592-25378-1-git-send-email-d-gerlach@ti.com> References: <1437166592-25378-1-git-send-email-d-gerlach@ti.com> MIME-Version: 1.0 Content-Type: text/plain Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 2871 Lines: 84 Add the device tree bindings document for the TI Wakeup M3 IPC device on AM33xx and AM43xx SoCs. These devices are used by the TI wkup_m3_ipc driver, and contain the registers upon which the IPC protocol to communicate with the Wakeup M3 processor is implemented. Signed-off-by: Dave Gerlach Signed-off-by: Suman Anna --- .../devicetree/bindings/soc/ti/wkup_m3_ipc.txt | 57 ++++++++++++++++++++++ 1 file changed, 57 insertions(+) create mode 100644 Documentation/devicetree/bindings/soc/ti/wkup_m3_ipc.txt diff --git a/Documentation/devicetree/bindings/soc/ti/wkup_m3_ipc.txt b/Documentation/devicetree/bindings/soc/ti/wkup_m3_ipc.txt new file mode 100644 index 0000000..4015504 --- /dev/null +++ b/Documentation/devicetree/bindings/soc/ti/wkup_m3_ipc.txt @@ -0,0 +1,57 @@ +Wakeup M3 IPC Driver +===================== + +The TI AM33xx and AM43xx family of devices use a small Cortex M3 co-processor +(commonly referred to as Wakeup M3 or CM3) to help with various low power tasks +that cannot be controlled from the MPU, like suspend/resume and certain deep +C-states for CPU Idle. Once the wkup_m3_ipc driver uses the wkup_m3_rproc driver +to boot the wkup_m3, it handles communication with the CM3 using IPC registers +present in the SoC's control module and a mailbox. The wkup_m3_ipc exposes an +API to allow the SoC PM code to execute specific PM tasks. + +Wkup M3 Device Node: +==================== +A wkup_m3_ipc device node is used to represent the IPC registers within an +SoC. + +Required properties: +-------------------- +- compatible: Should be, + "ti,am3352-wkup-m3-ipc" for AM33xx SoCs + "ti,am4372-wkup-m3-ipc" for AM43xx SoCs +- reg: Contains the IPC register address space to communicate + with the Wakeup M3 processor +- interrupts: Contains the interrupt information for the wkup_m3 + interrupt that signals the MPU. +- ti,rproc: phandle to the wkup_m3 rproc node so the IPC driver + can boot it. +- mboxes: phandles used by IPC framework to get correct mbox + channel for communication. Must point to appropriate + mbox_wkupm3 child node. + +Example: +-------- +/* AM33xx */ + l4_wkup: l4_wkup@44c00000 { + ... + + scm: scm@210000 { + compatible = "ti,am3-scm", "simple-bus"; + reg = <0x210000 0x2000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x210000 0x2000>; + + ... + + wkup_m3_ipc: wkup_m3_ipc@1324 { + compatible = "ti,am3352-wkup-m3-ipc"; + reg = <0x1324 0x24>; + interrupts = <78>; + ti,rproc = <&wkup_m3>; + mboxes = <&mailbox &mbox_wkupm3>; + }; + + ... + }; + }; -- 2.4.5 -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/