Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S932886AbbGTOwA (ORCPT ); Mon, 20 Jul 2015 10:52:00 -0400 Received: from mailgw01.mediatek.com ([218.249.47.110]:40751 "EHLO mailgw01.mediatek.com" rhost-flags-OK-FAIL-OK-FAIL) by vger.kernel.org with ESMTP id S1754225AbbGTOv5 (ORCPT ); Mon, 20 Jul 2015 10:51:57 -0400 X-Listener-Flag: 11101 Message-ID: <1437403910.11518.16.camel@mhfsdcap03> Subject: Re: [PATCH v2 4/5] xhci: mediatek: support MTK xHCI host controller From: chunfeng yun To: John Crispin CC: Mathias Nyman , Mark Rutland , , Sascha Hauer , , , Felipe Balbi , Rob Herring , , Matthias Brugger , , "Roger Quadros" Date: Mon, 20 Jul 2015 22:51:50 +0800 In-Reply-To: <55A3D0A4.2050201@openwrt.org> References: <1436348468-4126-1-git-send-email-chunfeng.yun@mediatek.com> <1436348468-4126-5-git-send-email-chunfeng.yun@mediatek.com> <55A3D0A4.2050201@openwrt.org> Content-Type: text/plain; charset="UTF-8" X-Mailer: Evolution 3.2.3-0ubuntu6 Content-Transfer-Encoding: 7bit MIME-Version: 1.0 X-MTK: N Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 36971 Lines: 1156 On Mon, 2015-07-13 at 16:52 +0200, John Crispin wrote: > Hi > > there is a cross dependency between the modules. xhci-mtk.ko requires > xhci.ko to be loaded. however this will look for xhci_mtk_add_ep_quirk() > which is part of xhci-mtk. the modules will build but are not run time > loadable. > > John > I seperate the quirk functions called by xhci_hcd.ko from xhci-mtk.c into another C file to fix up the issue. Thanks > On 08/07/2015 11:41, Chunfeng Yun wrote: > > MTK xhci host controller defines some extra SW scheduling > > parameters for HW to minimize the scheduling effort for > > synchronous and interrupt endpoints. The parameters are > > put into reseved DWs of slot context and endpoint context > > > > Signed-off-by: Chunfeng Yun > > --- > > drivers/usb/host/Kconfig | 9 + > > drivers/usb/host/Makefile | 1 + > > drivers/usb/host/xhci-mtk.c | 814 +++++++++++++++++++++++++++++++++++++++++++ > > drivers/usb/host/xhci-mtk.h | 108 ++++++ > > drivers/usb/host/xhci-ring.c | 35 +- > > drivers/usb/host/xhci.c | 19 +- > > drivers/usb/host/xhci.h | 1 + > > 7 files changed, 980 insertions(+), 7 deletions(-) > > create mode 100644 drivers/usb/host/xhci-mtk.c > > create mode 100644 drivers/usb/host/xhci-mtk.h > > > > diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig > > index 8afc3c1..2202c68 100644 > > --- a/drivers/usb/host/Kconfig > > +++ b/drivers/usb/host/Kconfig > > @@ -34,6 +34,15 @@ config USB_XHCI_PCI > > config USB_XHCI_PLATFORM > > tristate > > > > +config USB_XHCI_MTK > > + tristate "xHCI support for Mediatek MT65xx" > > + select USB_XHCI_PLATFORM > > + depends on ARCH_MEDIATEK || COMPILE_TEST > > + ---help--- > > + Say 'Y' to enable the support for the xHCI host controller > > + found in Mediatek MT65xx SoCs. > > + If unsure, say N. > > + > > config USB_XHCI_MVEBU > > tristate "xHCI support for Marvell Armada 375/38x" > > select USB_XHCI_PLATFORM > > diff --git a/drivers/usb/host/Makefile b/drivers/usb/host/Makefile > > index 754efaa..90c6eb2 100644 > > --- a/drivers/usb/host/Makefile > > +++ b/drivers/usb/host/Makefile > > @@ -30,6 +30,7 @@ endif > > > > obj-$(CONFIG_USB_XHCI_PCI) += xhci-pci.o > > obj-$(CONFIG_USB_XHCI_PLATFORM) += xhci-plat-hcd.o > > +obj-$(CONFIG_USB_XHCI_MTK) += xhci-mtk.o > > > > obj-$(CONFIG_USB_EHCI_HCD) += ehci-hcd.o > > obj-$(CONFIG_USB_EHCI_PCI) += ehci-pci.o > > diff --git a/drivers/usb/host/xhci-mtk.c b/drivers/usb/host/xhci-mtk.c > > new file mode 100644 > > index 0000000..45f0606 > > --- /dev/null > > +++ b/drivers/usb/host/xhci-mtk.c > > @@ -0,0 +1,814 @@ > > +/* > > + * Copyright (c) 2015 MediaTek Inc. > > + * Author: > > + * Zhigang.Wei > > + * Chunfeng.Yun > > + * > > + * This software is licensed under the terms of the GNU General Public > > + * License version 2, as published by the Free Software Foundation, and > > + * may be copied, distributed, and modified under those terms. > > + * > > + * This program is distributed in the hope that it will be useful, > > + * but WITHOUT ANY WARRANTY; without even the implied warranty of > > + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the > > + * GNU General Public License for more details. > > + * > > + */ > > + > > +#include > > +#include > > +#include > > +#include > > +#include > > +#include > > +#include > > +#include > > +#include > > +#include > > +#include > > + > > +#include "xhci.h" > > +#include "xhci-mtk.h" > > + > > + > > +#define SS_BW_BOUNDARY 51000 > > +/* table 5-5. High-speed Isoc Transaction Limits in usb_20 spec */ > > +#define HS_BW_BOUNDARY 6144 > > +/* usb2 spec section11.18.1: at most 188 FS bytes per microframe */ > > +#define FS_PAYLOAD_MAX 188 > > + > > +/* mtk scheduler bitmasks */ > > +#define EP_BPKTS(p) ((p) & 0x3f) > > +#define EP_BCSCOUNT(p) (((p) & 0x7) << 8) > > +#define EP_BBM(p) ((p) << 11) > > +#define EP_BOFFSET(p) ((p) & 0x3fff) > > +#define EP_BREPEAT(p) (((p) & 0x7fff) << 16) > > + > > + > > +struct xhci_hcd_mtk { > > + struct device *dev; > > + struct usb_hcd *hcd; > > + struct mu3h_sch_bw_info *sch_array; > > + struct regulator *vusb33; > > + struct regulator *vbus; > > + struct clk *sys_mac; /* sys and mac clock */ > > +}; > > + > > + > > +static int is_fs_or_ls(enum usb_device_speed speed) > > +{ > > + return speed == USB_SPEED_FULL || speed == USB_SPEED_LOW; > > +} > > + > > +static int get_bw_index(struct xhci_hcd *xhci, struct usb_device *udev, > > + struct usb_host_endpoint *ep) > > +{ > > + int bw_index; > > + int port_id; > > + struct xhci_virt_device *virt_dev; > > + > > + virt_dev = xhci->devs[udev->slot_id]; > > + port_id = virt_dev->real_port; > > + > > + if (udev->speed == USB_SPEED_SUPER) { > > + if (usb_endpoint_dir_out(&ep->desc)) > > + bw_index = (port_id - 1) * 2; > > + else > > + bw_index = (port_id - 1) * 2 + 1; > > + } else { > > + bw_index = port_id + xhci->num_usb3_ports - 1; > > + } > > + > > + return bw_index; > > +} > > + > > + > > +static void setup_sch_info(struct usb_device *udev, > > + struct xhci_ep_ctx *ep_ctx, struct mu3h_sch_ep_info *sch_ep) > > +{ > > + u32 ep_type; > > + u32 ep_interval; > > + u32 max_packet_size; > > + u32 max_burst; > > + u32 mult; > > + u32 esit_pkts; > > + > > + ep_type = CTX_TO_EP_TYPE(le32_to_cpu(ep_ctx->ep_info2)); > > + ep_interval = CTX_TO_EP_INTERVAL(le32_to_cpu(ep_ctx->ep_info)); > > + max_packet_size = MAX_PACKET_DECODED(le32_to_cpu(ep_ctx->ep_info2)); > > + max_burst = CTX_TO_MAX_BURST(le32_to_cpu(ep_ctx->ep_info2)); > > + mult = CTX_TO_EP_MULT(le32_to_cpu(ep_ctx->ep_info)); > > + pr_debug("%s: max_burst = %d, mult = %d\n", __func__, max_burst, mult); > > + > > + sch_ep->ep_type = ep_type; > > + sch_ep->max_packet_size = max_packet_size; > > + sch_ep->esit = 1 << ep_interval; > > + sch_ep->offset = 0; > > + sch_ep->burst_mode = 0; > > + > > + if (udev->speed == USB_SPEED_HIGH) { > > + sch_ep->cs_count = 0; > > + /* > > + * usb_20 spec section5.9 > > + * a single microframe is enough for HS synchromous endpoints > > + * in a interval > > + */ > > + sch_ep->num_budget_microframes = 1; > > + sch_ep->repeat = 0; > > + /* > > + * xHCI spec section6.2.3.4 > > + * @max_busrt is the number of additional transactions > > + * opportunities per microframe > > + */ > > + sch_ep->pkts = max_burst + 1; > > + sch_ep->bw_cost_per_microframe = max_packet_size * sch_ep->pkts; > > + } else if (udev->speed == USB_SPEED_SUPER) { > > + /* usb3_r1 spec section4.4.7 & 4.4.8 */ > > + sch_ep->cs_count = 0; > > + esit_pkts = (mult + 1) * (max_burst + 1); > > + if (ep_type == INT_IN_EP || ep_type == INT_OUT_EP) { > > + sch_ep->pkts = esit_pkts; > > + sch_ep->num_budget_microframes = 1; > > + sch_ep->repeat = 0; > > + } > > + > > + if (ep_type == ISOC_IN_EP || ep_type == ISOC_OUT_EP) { > > + if (esit_pkts <= sch_ep->esit) > > + sch_ep->pkts = 1; > > + else > > + sch_ep->pkts = roundup_pow_of_two(esit_pkts) > > + / sch_ep->esit; > > + > > + sch_ep->num_budget_microframes = > > + DIV_ROUND_UP(esit_pkts, sch_ep->pkts); > > + > > + if (sch_ep->num_budget_microframes > 1) > > + sch_ep->repeat = 1; > > + else > > + sch_ep->repeat = 0; > > + } > > + sch_ep->bw_cost_per_microframe = max_packet_size * sch_ep->pkts; > > + } else if (is_fs_or_ls(udev->speed)) { > > + /* > > + * usb_20 spec section11.18.4 > > + * assume worst cases > > + */ > > + sch_ep->repeat = 0; > > + sch_ep->pkts = 1; /* at most one packet for each microframe */ > > + if (ep_type == INT_IN_EP || ep_type == INT_OUT_EP) { > > + sch_ep->cs_count = 3; /* at most need 3 CS*/ > > + /* one for SS and one for budgeted transaction */ > > + sch_ep->num_budget_microframes = sch_ep->cs_count + 2; > > + sch_ep->bw_cost_per_microframe = max_packet_size; > > + } > > + if (ep_type == ISOC_OUT_EP) { > > + /* must never schedule a cs ISOC OUT ep */ > > + sch_ep->cs_count = 0; > > + /* > > + * the best case FS budget assumes that 188 FS bytes > > + * occur in each microframe > > + */ > > + sch_ep->num_budget_microframes = DIV_ROUND_UP( > > + sch_ep->max_packet_size, FS_PAYLOAD_MAX); > > + sch_ep->bw_cost_per_microframe = FS_PAYLOAD_MAX; > > + } > > + if (ep_type == ISOC_IN_EP) { > > + /* at most need additional two CS. */ > > + sch_ep->cs_count = DIV_ROUND_UP( > > + sch_ep->max_packet_size, FS_PAYLOAD_MAX) + 2; > > + sch_ep->num_budget_microframes = sch_ep->cs_count + 2; > > + sch_ep->bw_cost_per_microframe = FS_PAYLOAD_MAX; > > + } > > + } > > +} > > + > > +/* Get maximum bandwidth when we schedule at offset slot. */ > > +static u32 get_max_bw(struct mu3h_sch_bw_info *sch_bw, > > + struct mu3h_sch_ep_info *sch_ep, u32 offset) > > +{ > > + u32 num_esit; > > + u32 max_bw = 0; > > + int i; > > + int j; > > + > > + num_esit = XHCI_MTK_MAX_ESIT / sch_ep->esit; > > + for (i = 0; i < num_esit; i++) { > > + u32 base = offset + i * sch_ep->esit; > > + > > + for (j = 0; j < sch_ep->num_budget_microframes; j++) { > > + if (sch_bw->bus_bw[base + j] > max_bw) > > + max_bw = sch_bw->bus_bw[base + j]; > > + } > > + } > > + return max_bw; > > +} > > + > > +static void update_bus_bw(struct mu3h_sch_bw_info *sch_bw, > > + struct mu3h_sch_ep_info *sch_ep, int bw_cost) > > +{ > > + u32 num_esit; > > + u32 base; > > + int i; > > + int j; > > + > > + num_esit = XHCI_MTK_MAX_ESIT / sch_ep->esit; > > + for (i = 0; i < num_esit; i++) { > > + base = sch_ep->offset + i * sch_ep->esit; > > + for (j = 0; j < sch_ep->num_budget_microframes; j++) > > + sch_bw->bus_bw[base + j] += bw_cost; > > + } > > + > > +} > > + > > +static void debug_sch_ep(struct mu3h_sch_ep_info *sch_ep) > > +{ > > + pr_debug("%s:\n", __func__); > > + pr_debug("sch_ep->ep_type = %d\n", sch_ep->ep_type); > > + pr_debug("sch_ep->max_packet_size = %d\n", sch_ep->max_packet_size); > > + pr_debug("sch_ep->esit = %d\n", sch_ep->esit); > > + pr_debug("sch_ep->num_budget_microframes = %d\n", > > + sch_ep->num_budget_microframes); > > + pr_debug("sch_ep->bw_cost_per_microframe = %d\n", > > + sch_ep->bw_cost_per_microframe); > > + pr_debug("sch_ep->ep = %p\n", sch_ep->ep); > > + pr_debug("sch_ep->offset = %d\n", sch_ep->offset); > > + pr_debug("sch_ep->repeat = %d\n", sch_ep->repeat); > > + pr_debug("sch_ep->pkts = %d\n", sch_ep->pkts); > > + pr_debug("sch_ep->cs_count = %d\n", sch_ep->cs_count); > > +} > > + > > +static int check_sch_bw(struct usb_device *udev, > > + struct mu3h_sch_bw_info *sch_bw, struct mu3h_sch_ep_info *sch_ep) > > +{ > > + u32 offset; > > + u32 esit; > > + u32 num_budget_microframes; > > + u32 min_bw; > > + u32 min_index; > > + u32 worst_bw; > > + u32 bw_boundary; > > + > > + if (sch_ep->esit > XHCI_MTK_MAX_ESIT) > > + sch_ep->esit = XHCI_MTK_MAX_ESIT; > > + > > + esit = sch_ep->esit; > > + num_budget_microframes = sch_ep->num_budget_microframes; > > + > > + /* > > + * Search through all possible schedule microframes. > > + * and find a microframe where its worst bandwidth is minimum. > > + */ > > + min_bw = ~0; > > + min_index = 0; > > + for (offset = 0; offset < esit; offset++) { > > + if ((offset + num_budget_microframes) > sch_ep->esit) > > + break; > > + /* > > + * usb_20 spec section11.18: > > + * must never schedule Start-Split in Y6 > > + */ > > + if (is_fs_or_ls(udev->speed) && (offset % 8 == 6)) > > + continue; > > + > > + worst_bw = get_max_bw(sch_bw, sch_ep, offset); > > + if (min_bw > worst_bw) { > > + min_bw = worst_bw; > > + min_index = offset; > > + } > > + if (min_bw == 0) > > + break; > > + } > > + sch_ep->offset = min_index; > > + > > + debug_sch_ep(sch_ep); > > + > > + bw_boundary = (udev->speed == USB_SPEED_SUPER) > > + ? SS_BW_BOUNDARY : HS_BW_BOUNDARY; > > + > > + /* check bandwidth */ > > + if (min_bw + sch_ep->bw_cost_per_microframe > bw_boundary) > > + return -1; > > + > > + /* update bus bandwidth info */ > > + update_bus_bw(sch_bw, sch_ep, sch_ep->bw_cost_per_microframe); > > + > > + return 0; > > +} > > + > > +static void debug_sch_bw(struct mu3h_sch_bw_info *sch_bw) > > +{ > > + int i; > > + > > + pr_debug("%s: bus_bw_info\n", __func__); > > + for (i = 0; i < XHCI_MTK_MAX_ESIT; i++) > > + pr_debug("%d ", sch_bw->bus_bw[i]); > > + > > + pr_debug("\n"); > > +} > > + > > + > > +static bool need_bw_sch(struct usb_host_endpoint *ep, > > + enum usb_device_speed speed, int has_tt) > > +{ > > + /* only for periodic endpoints */ > > + if (usb_endpoint_xfer_control(&ep->desc) > > + || usb_endpoint_xfer_bulk(&ep->desc)) > > + return false; > > + /* > > + * for LS & FS periodic endpoints which its device don't attach > > + * to TT are also ignored, root-hub will schedule them directly > > + */ > > + if (is_fs_or_ls(speed) && !has_tt) > > + return false; > > + > > + return true; > > +} > > + > > +static int xhci_mtk_sch_init(struct xhci_hcd *xhci) > > +{ > > + struct usb_hcd *hcd = xhci_to_hcd(xhci); > > + struct device *dev = hcd->self.controller; > > + struct xhci_hcd_mtk *mtk = dev_get_drvdata(dev); > > + struct mu3h_sch_bw_info *sch_array; > > + int num_usb_bus; > > + int i; > > + > > + /* ss IN and OUT are separated */ > > + num_usb_bus = xhci->num_usb3_ports * 2 + xhci->num_usb2_ports; > > + > > + sch_array = kcalloc(num_usb_bus, sizeof(*sch_array), GFP_KERNEL); > > + if (sch_array == NULL) > > + return -ENOMEM; > > + > > + for (i = 0; i < num_usb_bus; i++) > > + INIT_LIST_HEAD(&sch_array[i].bw_ep_list); > > + > > + mtk->sch_array = sch_array; > > + > > + return 0; > > +} > > + > > + > > +static void xhci_mtk_sch_exit(struct xhci_hcd *xhci) > > +{ > > + struct usb_hcd *hcd = xhci_to_hcd(xhci); > > + struct device *dev = hcd->self.controller; > > + struct xhci_hcd_mtk *mtk = dev_get_drvdata(dev); > > + > > + kfree(mtk->sch_array); > > +} > > + > > + > > +int xhci_mtk_add_ep_quirk(struct usb_hcd *hcd, struct usb_device *udev, > > + struct usb_host_endpoint *ep) > > +{ > > + struct device *dev = hcd->self.controller; > > + struct xhci_hcd_mtk *mtk = dev_get_drvdata(dev); > > + > > + int ret = 0; > > + int port_id; > > + int bw_index; > > + struct xhci_hcd *xhci; > > + unsigned int ep_index; > > + struct xhci_ep_ctx *ep_ctx; > > + struct xhci_slot_ctx *slot_ctx; > > + struct xhci_virt_device *virt_dev; > > + struct mu3h_sch_bw_info *sch_bw; > > + struct mu3h_sch_ep_info *sch_ep; > > + struct mu3h_sch_bw_info *sch_array; > > + > > + xhci = hcd_to_xhci(hcd); > > + virt_dev = xhci->devs[udev->slot_id]; > > + ep_index = xhci_get_endpoint_index(&ep->desc); > > + slot_ctx = xhci_get_slot_ctx(xhci, virt_dev->in_ctx); > > + ep_ctx = xhci_get_ep_ctx(xhci, virt_dev->in_ctx, ep_index); > > + sch_array = mtk->sch_array; > > + > > + port_id = virt_dev->real_port; > > + xhci_dbg(xhci, "%s() xfer_type: %d, speed:%d, ep:%p\n", __func__, > > + usb_endpoint_type(&ep->desc), udev->speed, ep); > > + > > + if (!need_bw_sch(ep, udev->speed, slot_ctx->tt_info & TT_SLOT)) > > + return 0; > > + > > + bw_index = get_bw_index(xhci, udev, ep); > > + sch_bw = &sch_array[bw_index]; > > + > > + sch_ep = kzalloc(sizeof(struct mu3h_sch_ep_info), GFP_NOIO); > > + if (!sch_ep) > > + return -ENOMEM; > > + > > + setup_sch_info(udev, ep_ctx, sch_ep); > > + > > + ret = check_sch_bw(udev, sch_bw, sch_ep); > > + if (ret) { > > + xhci_err(xhci, "Not enough bandwidth!\n"); > > + kfree(sch_ep); > > + return -ENOSPC; > > + } > > + > > + list_add_tail(&sch_ep->endpoint, &sch_bw->bw_ep_list); > > + sch_ep->ep = ep; > > + > > + ep_ctx->reserved[0] |= cpu_to_le32(EP_BPKTS(sch_ep->pkts) > > + | EP_BCSCOUNT(sch_ep->cs_count) | EP_BBM(sch_ep->burst_mode)); > > + ep_ctx->reserved[1] |= cpu_to_le32(EP_BOFFSET(sch_ep->offset) > > + | EP_BREPEAT(sch_ep->repeat)); > > + > > + debug_sch_bw(sch_bw); > > + return 0; > > +} > > +EXPORT_SYMBOL_GPL(xhci_mtk_add_ep_quirk); > > + > > + > > +void xhci_mtk_drop_ep_quirk(struct usb_hcd *hcd, struct usb_device *udev, > > + struct usb_host_endpoint *ep) > > +{ > > + struct device *dev = hcd->self.controller; > > + struct xhci_hcd_mtk *mtk = dev_get_drvdata(dev); > > + > > + int bw_index; > > + struct xhci_hcd *xhci; > > + struct xhci_slot_ctx *slot_ctx; > > + struct xhci_virt_device *virt_dev; > > + struct mu3h_sch_bw_info *sch_array; > > + struct mu3h_sch_bw_info *sch_bw; > > + struct mu3h_sch_ep_info *sch_ep; > > + > > + xhci = hcd_to_xhci(hcd); > > + virt_dev = xhci->devs[udev->slot_id]; > > + slot_ctx = xhci_get_slot_ctx(xhci, virt_dev->in_ctx); > > + sch_array = mtk->sch_array; > > + > > + xhci_dbg(xhci, "%s() xfer_type: %d, speed:%d, ep:%p\n", __func__, > > + usb_endpoint_type(&ep->desc), udev->speed, ep); > > + > > + if (!need_bw_sch(ep, udev->speed, slot_ctx->tt_info & TT_SLOT)) > > + return; > > + > > + bw_index = get_bw_index(xhci, udev, ep); > > + sch_bw = &sch_array[bw_index]; > > + > > + list_for_each_entry(sch_ep, &sch_bw->bw_ep_list, endpoint) { > > + if (sch_ep->ep == ep) { > > + update_bus_bw(sch_bw, sch_ep, > > + -sch_ep->bw_cost_per_microframe); > > + list_del(&sch_ep->endpoint); > > + kfree(sch_ep); > > + break; > > + } > > + } > > + debug_sch_bw(sch_bw); > > +} > > +EXPORT_SYMBOL_GPL(xhci_mtk_drop_ep_quirk); > > + > > + > > +/* > > + * The TD size is the number of max packet sized packets remaining in the TD > > + * (including this TRB), right shifted by 10. > > + * It must fit in bits 21:17, so it can't be bigger than 31. > > + */ > > +u32 xhci_mtk_td_remainder_quirk(unsigned int td_running_total, > > + unsigned trb_buffer_length, struct urb *urb) > > +{ > > + u32 max = 31; > > + int remainder, td_packet_count, packet_transferred; > > + unsigned int td_transfer_size = urb->transfer_buffer_length; > > + unsigned int maxp; > > + > > + maxp = GET_MAX_PACKET(usb_endpoint_maxp(&urb->ep->desc)); > > + > > + /* 0 for the last TRB */ > > + if (td_running_total + trb_buffer_length == td_transfer_size) > > + return 0; > > + > > + packet_transferred = td_running_total / maxp; > > + td_packet_count = DIV_ROUND_UP(td_transfer_size, maxp); > > + remainder = td_packet_count - packet_transferred; > > + > > + if (remainder > max) > > + return max << 17; > > + else > > + return remainder << 17; > > +} > > +EXPORT_SYMBOL_GPL(xhci_mtk_td_remainder_quirk); > > + > > + > > +static int xhci_mtk_setup(struct usb_hcd *hcd); > > +static const struct xhci_driver_overrides xhci_mtk_overrides __initconst = { > > + .extra_priv_size = sizeof(struct xhci_hcd), > > + .reset = xhci_mtk_setup, > > +}; > > + > > +static struct hc_driver __read_mostly xhci_mtk_hc_driver; > > + > > + > > +static int xhci_mtk_ldos_enable(struct xhci_hcd_mtk *mtk) > > +{ > > + int ret; > > + > > + ret = regulator_enable(mtk->vbus); > > + if (ret) { > > + dev_err(mtk->dev, "failed to enable vbus\n"); > > + return ret; > > + } > > + > > + ret = regulator_enable(mtk->vusb33); > > + if (ret) { > > + dev_err(mtk->dev, "failed to enable vusb33\n"); > > + regulator_disable(mtk->vbus); > > + return ret; > > + } > > + return 0; > > +} > > + > > +static void xhci_mtk_ldos_disable(struct xhci_hcd_mtk *mtk) > > +{ > > + regulator_disable(mtk->vbus); > > + regulator_disable(mtk->vusb33); > > +} > > + > > +static void xhci_mtk_quirks(struct device *dev, struct xhci_hcd *xhci) > > +{ > > + /* > > + * As of now platform drivers don't provide MSI support so we ensure > > + * here that the generic code does not try to make a pci_dev from our > > + * dev struct in order to setup MSI > > + */ > > + xhci->quirks |= XHCI_PLAT; > > + xhci->quirks |= XHCI_MTK_HOST; > > + /* > > + * MTK host controller gives a spurious successful event after a > > + * short transfer. Ignore it. > > + */ > > + xhci->quirks |= XHCI_SPURIOUS_SUCCESS; > > +} > > + > > +/* called during probe() after chip reset completes */ > > +static int xhci_mtk_setup(struct usb_hcd *hcd) > > +{ > > + struct xhci_hcd *xhci; > > + int ret; > > + > > + ret = xhci_gen_setup(hcd, xhci_mtk_quirks); > > + if (ret) > > + return ret; > > + > > + if (!usb_hcd_is_primary_hcd(hcd)) > > + return 0; > > + > > + xhci = hcd_to_xhci(hcd); > > + ret = xhci_mtk_sch_init(xhci); > > + if (ret) { > > + kfree(xhci); > > + return ret; > > + } > > + > > + return ret; > > +} > > + > > + > > +static int xhci_mtk_probe(struct platform_device *pdev) > > +{ > > + struct device *dev = &pdev->dev; > > + struct device_node *node = pdev->dev.of_node; > > + struct usb_xhci_pdata *pdata = dev_get_platdata(dev); > > + struct xhci_hcd_mtk *mtk; > > + const struct hc_driver *driver; > > + struct xhci_hcd *xhci; > > + struct resource *res; > > + struct usb_hcd *hcd; > > + int ret = -ENODEV; > > + int irq; > > + > > + if (usb_disabled()) > > + return -ENODEV; > > + > > + driver = &xhci_mtk_hc_driver; > > + mtk = devm_kzalloc(dev, sizeof(*mtk), GFP_KERNEL); > > + if (!mtk) > > + return -ENOMEM; > > + mtk->dev = dev; > > + > > + mtk->sys_mac = devm_clk_get(dev, "sys_mac"); > > + if (IS_ERR(mtk->sys_mac)) { > > + dev_err(dev, "error to get sys_mac\n"); > > + ret = PTR_ERR(mtk->sys_mac); > > + goto err; > > + } > > + > > + mtk->vbus = devm_regulator_get(dev, "reg-vbus"); > > + if (IS_ERR(mtk->vbus)) { > > + dev_err(dev, "fail to get vbus\n"); > > + ret = PTR_ERR(mtk->vbus); > > + goto err; > > + } > > + > > + mtk->vusb33 = devm_regulator_get(dev, "reg-vusb33"); > > + if (IS_ERR(mtk->vusb33)) { > > + dev_err(dev, "fail to get vusb33\n"); > > + ret = PTR_ERR(mtk->vusb33); > > + goto err; > > + } > > + pm_runtime_enable(dev); > > + pm_runtime_get_sync(dev); > > + > > + ret = xhci_mtk_ldos_enable(mtk); > > + if (ret) > > + goto disable_pm; > > + > > + ret = clk_prepare_enable(mtk->sys_mac); > > + if (ret) > > + goto disable_ldos; > > + > > + irq = platform_get_irq(pdev, 0); > > + if (irq < 0) > > + goto disable_clk; > > + > > + /* Initialize dma_mask and coherent_dma_mask to 32-bits */ > > + ret = dma_set_coherent_mask(dev, DMA_BIT_MASK(32)); > > + if (ret) > > + goto disable_clk; > > + > > + if (!dev->dma_mask) > > + dev->dma_mask = &dev->coherent_dma_mask; > > + else > > + dma_set_mask(dev, DMA_BIT_MASK(32)); > > + > > + hcd = usb_create_hcd(driver, dev, dev_name(dev)); > > + if (!hcd) { > > + ret = -ENOMEM; > > + goto disable_clk; > > + } > > + > > + /* > > + * USB 2.0 roothub is stored in the platform_device. > > + * Swap it with mtk HCD. > > + */ > > + mtk->hcd = platform_get_drvdata(pdev); > > + platform_set_drvdata(pdev, mtk); > > + > > + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); > > + hcd->regs = devm_ioremap_resource(dev, res); > > + if (IS_ERR(hcd->regs)) { > > + ret = PTR_ERR(hcd->regs); > > + goto put_usb2_hcd; > > + } > > + hcd->rsrc_start = res->start; > > + hcd->rsrc_len = resource_size(res); > > + > > + hcd->usb_phy = devm_usb_get_phy_by_phandle(dev, "usb-phy", 0); > > + if (IS_ERR(hcd->usb_phy)) { > > + ret = PTR_ERR(hcd->usb_phy); > > + if (ret == -EPROBE_DEFER) > > + goto put_usb2_hcd; > > + hcd->usb_phy = NULL; > > + } else { > > + ret = usb_phy_init(hcd->usb_phy); > > + if (ret) > > + goto put_usb2_hcd; > > + } > > + > > + device_wakeup_enable(hcd->self.controller); > > + > > + xhci = hcd_to_xhci(hcd); > > + xhci->main_hcd = hcd; > > + xhci->shared_hcd = usb_create_shared_hcd(driver, dev, > > + dev_name(dev), hcd); > > + if (!xhci->shared_hcd) { > > + ret = -ENOMEM; > > + goto disable_usb_phy; > > + } > > + > > + if ((node && of_property_read_bool(node, "usb3-lpm-capable")) || > > + (pdata && pdata->usb3_lpm_capable)) > > + xhci->quirks |= XHCI_LPM_SUPPORT; > > + > > + if (HCC_MAX_PSA(xhci->hcc_params) >= 4) > > + xhci->shared_hcd->can_do_streams = 1; > > + > > + ret = usb_add_hcd(hcd, irq, IRQF_SHARED); > > + if (ret) > > + goto put_usb3_hcd; > > + > > + ret = usb_add_hcd(xhci->shared_hcd, irq, IRQF_SHARED); > > + if (ret) > > + goto dealloc_usb2_hcd; > > + > > + return 0; > > + > > + > > +dealloc_usb2_hcd: > > + usb_remove_hcd(hcd); > > + > > +put_usb3_hcd: > > + usb_put_hcd(xhci->shared_hcd); > > + > > +disable_usb_phy: > > + usb_phy_shutdown(hcd->usb_phy); > > + > > +put_usb2_hcd: > > + usb_put_hcd(hcd); > > + > > +disable_clk: > > + clk_disable_unprepare(mtk->sys_mac); > > + > > +disable_ldos: > > + xhci_mtk_ldos_disable(mtk); > > + > > +disable_pm: > > + pm_runtime_put_sync(dev); > > + pm_runtime_disable(dev); > > + > > +err: > > + return ret; > > +} > > + > > +static int xhci_mtk_remove(struct platform_device *dev) > > +{ > > + struct xhci_hcd_mtk *mtk = platform_get_drvdata(dev); > > + struct usb_hcd *hcd = mtk->hcd; > > + struct xhci_hcd *xhci = hcd_to_xhci(hcd); > > + > > + usb_remove_hcd(xhci->shared_hcd); > > + usb_phy_shutdown(hcd->usb_phy); > > + > > + usb_remove_hcd(hcd); > > + usb_put_hcd(xhci->shared_hcd); > > + usb_put_hcd(hcd); > > + xhci_mtk_sch_exit(xhci); > > + clk_disable_unprepare(mtk->sys_mac); > > + xhci_mtk_ldos_disable(mtk); > > + pm_runtime_put_sync(&dev->dev); > > + pm_runtime_disable(&dev->dev); > > + > > + return 0; > > +} > > + > > +#ifdef CONFIG_PM_SLEEP > > +static int xhci_mtk_suspend(struct device *dev) > > +{ > > + struct xhci_hcd_mtk *mtk = dev_get_drvdata(dev); > > + struct usb_hcd *hcd = mtk->hcd; > > + int ret; > > + > > + ret = usb_phy_set_suspend(hcd->usb_phy, 1); > > + /* keep on power of mac to maintain register, and only close clock */ > > + clk_disable_unprepare(mtk->sys_mac); > > + return ret; > > +} > > + > > +static int xhci_mtk_resume(struct device *dev) > > +{ > > + struct xhci_hcd_mtk *mtk = dev_get_drvdata(dev); > > + struct usb_hcd *hcd = mtk->hcd; > > + int ret; > > + > > + clk_prepare_enable(mtk->sys_mac); > > + ret = usb_phy_set_suspend(hcd->usb_phy, 0); > > + > > + return ret; > > +} > > + > > +static const struct dev_pm_ops xhci_mtk_pm_ops = { > > + SET_SYSTEM_SLEEP_PM_OPS(xhci_mtk_suspend, xhci_mtk_resume) > > +}; > > +#define DEV_PM_OPS (&xhci_mtk_pm_ops) > > +#else > > +#define DEV_PM_OPS NULL > > +#endif /* CONFIG_PM */ > > + > > +#ifdef CONFIG_OF > > +static const struct of_device_id mtk_xhci_of_match[] = { > > + { .compatible = "mediatek,mt8173-xhci"}, > > + { }, > > +}; > > +MODULE_DEVICE_TABLE(of, mtk_xhci_of_match); > > +#endif > > + > > +static struct platform_driver mtk_xhci_driver = { > > + .probe = xhci_mtk_probe, > > + .remove = xhci_mtk_remove, > > + .driver = { > > + .name = "xhci-mtk", > > + .pm = DEV_PM_OPS, > > + .of_match_table = of_match_ptr(mtk_xhci_of_match), > > + }, > > +}; > > + > > +static int __init xhci_mtk_init(void) > > +{ > > + xhci_init_driver(&xhci_mtk_hc_driver, &xhci_mtk_overrides); > > + return platform_driver_register(&mtk_xhci_driver); > > +} > > +module_init(xhci_mtk_init); > > + > > +static void __exit xhci_mtk_exit(void) > > +{ > > + platform_driver_unregister(&mtk_xhci_driver); > > +} > > +module_exit(xhci_mtk_exit); > > + > > +MODULE_DESCRIPTION("MediaTek xHCI Host Controller Driver"); > > +MODULE_LICENSE("GPL v2"); > > + > > diff --git a/drivers/usb/host/xhci-mtk.h b/drivers/usb/host/xhci-mtk.h > > new file mode 100644 > > index 0000000..e0fdd19 > > --- /dev/null > > +++ b/drivers/usb/host/xhci-mtk.h > > @@ -0,0 +1,108 @@ > > +/* > > + * Copyright (c) 2015 MediaTek Inc. > > + * Author: > > + * Zhigang.Wei > > + * Chunfeng.Yun > > + * > > + * This software is licensed under the terms of the GNU General Public > > + * License version 2, as published by the Free Software Foundation, and > > + * may be copied, distributed, and modified under those terms. > > + * > > + * This program is distributed in the hope that it will be useful, > > + * but WITHOUT ANY WARRANTY; without even the implied warranty of > > + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the > > + * GNU General Public License for more details. > > + * > > + */ > > + > > +#ifndef _XHCI_MTK_H_ > > +#define _XHCI_MTK_H_ > > + > > +#include "xhci.h" > > + > > +/** > > + * To simplify scheduler algorithm, set a upper limit for ESIT, > > + * if a synchromous ep's ESIT is larger than @XHCI_MTK_MAX_ESIT, > > + * round down to the limit value, that means allocating more > > + * bandwidth to it. > > + */ > > +#define XHCI_MTK_MAX_ESIT 64 > > + > > +/** > > + * struct mu3h_sch_bw_info > > + * @bus_bw: array to keep track of bandwidth already used at each uframes > > + * @bw_ep_list: eps in the bandwidth domain > > + * > > + * treat a HS root port as a bandwidth domain, but treat a SS root port as > > + * two bandwidth domains, one for IN eps and another for OUT eps. > > + */ > > +struct mu3h_sch_bw_info { > > + u32 bus_bw[XHCI_MTK_MAX_ESIT]; > > + struct list_head bw_ep_list; > > +}; > > + > > +/** > > + * struct mu3h_sch_ep_info > > + * @esit: unit is 125us, equal to 2 << Interval field in ep-context > > + * @num_budget_microframes: number of continuous uframes > > + * (@repeat==1) scheduled within the interval > > + * @ep: address of usb_host_endpoint > > + * @offset: which uframe of the interval that transfer should be > > + * scheduled first time within the interval > > + * @repeat: the time gap between two uframes that transfers are > > + * scheduled within a interval. in the simple algorithm, only > > + * assign 0 or 1 to it; 0 means using only one uframe in a > > + * interval, and1 means using @num_budget_microframes > > + * continuous uframes > > + * @pkts: number of packets to be transferred in the scheduled uframes > > + * @cs_count: number of CS that host will trigger > > + */ > > +struct mu3h_sch_ep_info { > > + u32 ep_type; > > + u32 max_packet_size; > > + u32 esit; > > + u32 num_budget_microframes; > > + u32 bw_cost_per_microframe; > > + void *ep; > > + struct list_head endpoint; > > + > > + /* mtk xhci scheduling info */ > > + u32 offset; > > + u32 repeat; > > + u32 pkts; > > + u32 cs_count; > > + u32 burst_mode; > > +}; > > + > > + > > +#if IS_ENABLED(CONFIG_USB_XHCI_MTK) > > + > > +int xhci_mtk_add_ep_quirk(struct usb_hcd *hcd, struct usb_device *udev, > > + struct usb_host_endpoint *ep); > > +void xhci_mtk_drop_ep_quirk(struct usb_hcd *hcd, struct usb_device *udev, > > + struct usb_host_endpoint *ep); > > +u32 xhci_mtk_td_remainder_quirk(unsigned int td_running_total, > > + unsigned trb_buffer_length, struct urb *urb); > > + > > +#else > > +static inline int xhci_mtk_add_ep_quirk(struct usb_hcd *hcd, > > + struct usb_device *udev, struct usb_host_endpoint *ep) > > +{ > > + return 0; > > +} > > + > > +static inline void xhci_mtk_drop_ep_quirk(struct usb_hcd *hcd, > > + struct usb_device *udev, struct usb_host_endpoint *ep) > > +{ > > + return 0; > > +} > > + > > +static inline u32 xhci_mtk_td_remainder_quirk(unsigned int td_running_total, > > + unsigned trb_buffer_length, struct urb *urb) > > +{ > > + return 0; > > +} > > + > > +#endif > > + > > +#endif /* _XHCI_MTK_H_ */ > > diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c > > index 94416ff..73997a0 100644 > > --- a/drivers/usb/host/xhci-ring.c > > +++ b/drivers/usb/host/xhci-ring.c > > @@ -68,6 +68,7 @@ > > #include > > #include "xhci.h" > > #include "xhci-trace.h" > > +#include "xhci-mtk.h" > > > > /* > > * Returns zero if the TRB isn't in this segment, otherwise it returns the DMA > > @@ -3131,9 +3132,14 @@ static int queue_bulk_sg_tx(struct xhci_hcd *xhci, gfp_t mem_flags, > > > > /* Set the TRB length, TD size, and interrupter fields. */ > > if (xhci->hci_version < 0x100) { > > - remainder = xhci_td_remainder( > > + if (xhci->quirks & XHCI_MTK_HOST) { > > + remainder = xhci_mtk_td_remainder_quirk( > > + running_total, trb_buff_len, urb); > > + } else { > > + remainder = xhci_td_remainder( > > urb->transfer_buffer_length - > > running_total); > > + } > > } else { > > remainder = xhci_v1_0_td_remainder(running_total, > > trb_buff_len, total_packet_count, urb, > > @@ -3286,9 +3292,14 @@ int xhci_queue_bulk_tx(struct xhci_hcd *xhci, gfp_t mem_flags, > > > > /* Set the TRB length, TD size, and interrupter fields. */ > > if (xhci->hci_version < 0x100) { > > - remainder = xhci_td_remainder( > > + if (xhci->quirks & XHCI_MTK_HOST) { > > + remainder = xhci_mtk_td_remainder_quirk( > > + running_total, trb_buff_len, urb); > > + } else { > > + remainder = xhci_td_remainder( > > urb->transfer_buffer_length - > > running_total); > > + } > > } else { > > remainder = xhci_v1_0_td_remainder(running_total, > > trb_buff_len, total_packet_count, urb, > > @@ -3383,7 +3394,7 @@ int xhci_queue_ctrl_tx(struct xhci_hcd *xhci, gfp_t mem_flags, > > field |= 0x1; > > > > /* xHCI 1.0 6.4.1.2.1: Transfer Type field */ > > - if (xhci->hci_version == 0x100) { > > + if ((xhci->hci_version == 0x100) || (xhci->quirks & XHCI_MTK_HOST)) { > > if (urb->transfer_buffer_length > 0) { > > if (setup->bRequestType & USB_DIR_IN) > > field |= TRB_TX_TYPE(TRB_DATA_IN); > > @@ -3407,8 +3418,14 @@ int xhci_queue_ctrl_tx(struct xhci_hcd *xhci, gfp_t mem_flags, > > field = TRB_TYPE(TRB_DATA); > > > > length_field = TRB_LEN(urb->transfer_buffer_length) | > > - xhci_td_remainder(urb->transfer_buffer_length) | > > TRB_INTR_TARGET(0); > > + > > + if (xhci->quirks & XHCI_MTK_HOST) > > + length_field |= xhci_mtk_td_remainder_quirk(0, > > + urb->transfer_buffer_length, urb); > > + else > > + length_field |= xhci_td_remainder(urb->transfer_buffer_length); > > + > > if (urb->transfer_buffer_length > 0) { > > if (setup->bRequestType & USB_DIR_IN) > > field |= TRB_DIR_IN; > > @@ -3632,8 +3649,14 @@ static int xhci_queue_isoc_tx(struct xhci_hcd *xhci, gfp_t mem_flags, > > > > /* Set the TRB length, TD size, & interrupter fields. */ > > if (xhci->hci_version < 0x100) { > > - remainder = xhci_td_remainder( > > - td_len - running_total); > > + if (xhci->quirks & XHCI_MTK_HOST) { > > + remainder = xhci_mtk_td_remainder_quirk( > > + running_total, trb_buff_len, > > + urb); > > + } else { > > + remainder = xhci_td_remainder( > > + td_len - running_total); > > + } > > } else { > > remainder = xhci_v1_0_td_remainder( > > running_total, trb_buff_len, > > diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c > > index 7da0d60..209fc8a 100644 > > --- a/drivers/usb/host/xhci.c > > +++ b/drivers/usb/host/xhci.c > > @@ -31,6 +31,7 @@ > > > > #include "xhci.h" > > #include "xhci-trace.h" > > +#include "xhci-mtk.h" > > > > #define DRIVER_AUTHOR "Sarah Sharp" > > #define DRIVER_DESC "'eXtensible' Host Controller (xHC) Driver" > > @@ -623,7 +624,11 @@ int xhci_run(struct usb_hcd *hcd) > > "// Set the interrupt modulation register"); > > temp = readl(&xhci->ir_set->irq_control); > > temp &= ~ER_IRQ_INTERVAL_MASK; > > - temp |= (u32) 160; > > + /* > > + * the increment interval is 8 times as much as that defined > > + * in xHCI spec on MTK's controller > > + */ > > + temp |= (u32) ((xhci->quirks & XHCI_MTK_HOST) ? 20 : 160); > > writel(temp, &xhci->ir_set->irq_control); > > > > /* Set the HCD state before we enable the irqs */ > > @@ -1688,6 +1693,9 @@ int xhci_drop_endpoint(struct usb_hcd *hcd, struct usb_device *udev, > > > > xhci_endpoint_zero(xhci, xhci->devs[udev->slot_id], ep); > > > > + if (xhci->quirks & XHCI_MTK_HOST) > > + xhci_mtk_drop_ep_quirk(hcd, udev, ep); > > + > > xhci_dbg(xhci, "drop ep 0x%x, slot id %d, new drop flags = %#x, new add flags = %#x\n", > > (unsigned int) ep->desc.bEndpointAddress, > > udev->slot_id, > > @@ -1783,6 +1791,15 @@ int xhci_add_endpoint(struct usb_hcd *hcd, struct usb_device *udev, > > return -ENOMEM; > > } > > > > + if (xhci->quirks & XHCI_MTK_HOST) { > > + ret = xhci_mtk_add_ep_quirk(hcd, udev, ep); > > + if (ret < 0) { > > + xhci_free_or_cache_endpoint_ring(xhci, > > + virt_dev, ep_index); > > + return ret; > > + } > > + } > > + > > ctrl_ctx->add_flags |= cpu_to_le32(added_ctxs); > > new_add_flags = le32_to_cpu(ctrl_ctx->add_flags); > > > > diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h > > index 31e46cc..d257ce3 100644 > > --- a/drivers/usb/host/xhci.h > > +++ b/drivers/usb/host/xhci.h > > @@ -1567,6 +1567,7 @@ struct xhci_hcd { > > /* For controllers with a broken beyond repair streams implementation */ > > #define XHCI_BROKEN_STREAMS (1 << 19) > > #define XHCI_PME_STUCK_QUIRK (1 << 20) > > +#define XHCI_MTK_HOST (1 << 21) > > unsigned int num_active_eps; > > unsigned int limit_active_eps; > > /* There are two roothubs to keep track of bus suspend info for */ > > -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/