Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id ; Wed, 12 Feb 2003 14:12:28 -0500 Received: (majordomo@vger.kernel.org) by vger.kernel.org id ; Wed, 12 Feb 2003 14:12:28 -0500 Received: from ztxmail01.ztx.compaq.com ([161.114.1.205]:38407 "EHLO ztxmail01.ztx.compaq.com") by vger.kernel.org with ESMTP id ; Wed, 12 Feb 2003 14:12:14 -0500 Date: Wed, 12 Feb 2003 13:22:37 +0600 From: steve cameron To: linux-kernel@vger.kernel.org Cc: axboe@suse.de Subject: Re: [PATCH] 2.5.60 make cciss driver compile Message-ID: <20030212072237.GI1032@zuul.cca.cpqcorp.net> Reply-To: steve.cameron@hp.com Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.4i Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 7289 Lines: 232 * Remove udelay in command polling routine * extend timeout to 20 seconds (need for certain multiport storage box) * Remove unneeded init time code in cciss_scsi.c (thus allowing removal of udelay in command polling code.) (patch 9 of 11) -- steve --- linux-2.5.60/drivers/block/cciss.c~20_sec_timeout 2003-02-12 10:13:14.000000000 +0600 +++ linux-2.5.60-scameron/drivers/block/cciss.c 2003-02-12 10:13:14.000000000 +0600 @@ -1236,24 +1236,25 @@ free_err: /* * Wait polling for a command to complete. * The memory mapped FIFO is polled for the completion. - * Used only at init time, interrupts disabled. + * Used only at init time, interrupts from the HBA are disabled. */ static unsigned long pollcomplete(int ctlr) { - unsigned long done; - int i; + unsigned long done; + int i; - /* Wait (up to 2 seconds) for a command to complete */ + /* Wait (up to 20 seconds) for a command to complete */ - for (i = 200000; i > 0; i--) { - done = hba[ctlr]->access.command_completed(hba[ctlr]); - if (done == FIFO_EMPTY) { - udelay(10); /* a short fixed delay */ - } else - return (done); - } - /* Invalid address to tell caller we ran out of time */ - return 1; + for (i = 20 * HZ; i > 0; i--) { + done = hba[ctlr]->access.command_completed(hba[ctlr]); + if (done == FIFO_EMPTY) { + set_current_state(TASK_UNINTERRUPTIBLE); + schedule_timeout(1); + } else + return (done); + } + /* Invalid address to tell caller we ran out of time */ + return 1; } /* * Send a command to the controller, and wait for it to complete. @@ -2402,7 +2403,7 @@ static int __init cciss_init_one(struct cciss_getgeometry(i); - cciss_find_non_disk_devices(i); /* find our tape drives, if any */ + cciss_scsi_setup(i); /* Turn the interrupts on so we can service requests */ hba[i]->access.set_intr_mask(hba[i], CCISS_INTR_ON); --- linux-2.5.60/drivers/block/cciss_scsi.c~20_sec_timeout 2003-02-12 10:13:14.000000000 +0600 +++ linux-2.5.60-scameron/drivers/block/cciss_scsi.c 2003-02-12 10:13:14.000000000 +0600 @@ -201,14 +201,12 @@ scsi_cmd_free(ctlr_info_t *h, CommandLis } static int -scsi_cmd_stack_setup(int ctlr) +scsi_cmd_stack_setup(int ctlr, struct cciss_scsi_adapter_data_t *sa) { int i; - struct cciss_scsi_adapter_data_t *sa; struct cciss_scsi_cmd_stack_t *stk; size_t size; - sa = (struct cciss_scsi_adapter_data_t *) hba[ctlr]->scsi_ctlr; stk = &sa->cmd_stack; size = sizeof(struct cciss_scsi_cmd_stack_elem_t) * CMD_STACK_SIZE; @@ -537,126 +535,24 @@ lookup_scsi3addr(int ctlr, int bus, int return -1; } - static void -cciss_find_non_disk_devices(int cntl_num) +cciss_scsi_setup(int cntl_num) { - ReportLunData_struct *ld_buff; - InquiryData_struct *inq_buff; - int return_code; - int i; - int listlength = 0; - int num_luns; - unsigned char scsi3addr[8]; - unsigned long flags; - int reportlunsize = sizeof(*ld_buff) + CISS_MAX_PHYS_LUN * 8; + struct cciss_scsi_adapter_data_t * shba; - hba[cntl_num]->scsi_ctlr = (void *) - kmalloc(sizeof(struct cciss_scsi_adapter_data_t), - GFP_KERNEL); - if (hba[cntl_num]->scsi_ctlr == NULL) - return; - - ((struct cciss_scsi_adapter_data_t *) - hba[cntl_num]->scsi_ctlr)->scsi_host = NULL; - ((struct cciss_scsi_adapter_data_t *) - hba[cntl_num]->scsi_ctlr)->lock = SPIN_LOCK_UNLOCKED; - ((struct cciss_scsi_adapter_data_t *) - hba[cntl_num]->scsi_ctlr)->registered = 0; - - if (scsi_cmd_stack_setup(cntl_num) != 0) { - printk("Trouble, returned non-zero!\n"); - return; - } - - ld_buff = kmalloc(reportlunsize, GFP_KERNEL); - if (ld_buff == NULL) { - printk(KERN_ERR "cciss: out of memory\n"); - return; - } - memset(ld_buff, 0, sizeof(ReportLunData_struct)); - inq_buff = kmalloc(sizeof( InquiryData_struct), GFP_KERNEL); - if (inq_buff == NULL) { - printk(KERN_ERR "cciss: out of memory\n"); - kfree(ld_buff); - return; - } - - /* Get the physical luns */ - return_code = sendcmd(CISS_REPORT_PHYS, cntl_num, ld_buff, - reportlunsize, 0, 0, 0, NULL ); - - if( return_code == IO_OK) { - unsigned char *c = &ld_buff->LUNListLength[0]; - listlength = (c[0] << 24) | (c[1] << 16) | (c[2] << 8) | c[3]; - } - else { /* getting report of physical luns failed */ - printk(KERN_WARNING "cciss: report physical luns" - " command failed\n"); - listlength = 0; - } - - CPQ_TAPE_LOCK(cntl_num, flags); ccissscsi[cntl_num].ndevices = 0; - num_luns = listlength / 8; // 8 bytes pre entry - /* printk("Found %d LUNs\n", num_luns); */ - - if (num_luns > CISS_MAX_PHYS_LUN) - { - printk(KERN_WARNING - "cciss: Maximum physical LUNs (%d) exceeded. " - "%d LUNs ignored.\n", CISS_MAX_PHYS_LUN, - num_luns - CISS_MAX_PHYS_LUN); - num_luns = CISS_MAX_PHYS_LUN; - } - - for(i=0; iLUN[i], 8); /* ugly... */ - return_code = sendcmd(CISS_INQUIRY, cntl_num, inq_buff, - sizeof(InquiryData_struct), 2, 0 ,0, scsi3addr ); - if (return_code == IO_OK) { - if(inq_buff->data_byte[8] == 0xFF) - { - printk(KERN_WARNING "cciss: inquiry failed\n"); - } else { - int devtype; - - /* printk("Inquiry...\n"); - print_bytes((unsigned char *) inq_buff, 36, 1, 1); */ - devtype = (inq_buff->data_byte[0] & 0x1f); - - switch (devtype) - { - case 0x01: /* sequential access, (tape) */ - case 0x08: /* medium changer */ - /* this is the only kind of dev */ - /* we want to expose here. */ - if (cciss_scsi_add_entry(cntl_num, -1, - (unsigned char *) ld_buff->LUN[i], - devtype) != 0) - i=num_luns; // leave loop - break; - default: - break; - } - - } - } - else printk("cciss: inquiry failed.\n"); + shba = (struct cciss_scsi_adapter_data_t *) + kmalloc(sizeof(*shba), GFP_KERNEL); + if (shba == NULL) + return; + shba->scsi_host = NULL; + shba->lock = SPIN_LOCK_UNLOCKED; + shba->registered = 0; + if (scsi_cmd_stack_setup(cntl_num, shba) != 0) { + kfree(shba); + shba = NULL; } -#if 0 - for (i=0;iscsi_ctlr = (void *) shba; return; } @@ -1603,7 +1499,7 @@ cciss_proc_tape_report(int ctlr, unsigne /* If no tape support, then these become defined out of existence */ -#define cciss_find_non_disk_devices(cntl_num) +#define cciss_scsi_setup(cntl_num) #define cciss_unregister_scsi(ctlr) #define cciss_register_scsi(ctlr) #define cciss_proc_tape_report(ctlr, buffer, pos, len) _ - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/