Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S964943AbbGVMBW (ORCPT ); Wed, 22 Jul 2015 08:01:22 -0400 Received: from mailgw01.mediatek.com ([210.61.82.183]:37987 "EHLO mailgw01.mediatek.com" rhost-flags-OK-FAIL-OK-FAIL) by vger.kernel.org with ESMTP id S964793AbbGVMBD (ORCPT ); Wed, 22 Jul 2015 08:01:03 -0400 X-Listener-Flag: 11101 From: Henry Chen To: Mark Brown CC: Liam Girdwood , Matthias Brugger , Mark Rutland , Sascha Hauer , , , , , Subject: [PATCH v2 2/2] regulator: mt6311: Add support for mt6311 regulator Date: Wed, 22 Jul 2015 20:00:53 +0800 Message-ID: <1437566453-13117-3-git-send-email-henryc.chen@mediatek.com> X-Mailer: git-send-email 1.8.1.1.dirty In-Reply-To: <1437566453-13117-1-git-send-email-henryc.chen@mediatek.com> References: <1437566453-13117-1-git-send-email-henryc.chen@mediatek.com> MIME-Version: 1.0 Content-Type: text/plain X-MTK: N Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 11997 Lines: 378 Add regulator support for mt6311. It has 2 regulaotrs - Buck and LDO, provide the related buck/ldo voltage data to the driver, and creates the regulator_desc table. Supported operations for Buck are enabled/disabled and voltage change, only enabled/disabled for LDO. Signed-off-by: Henry Chen --- drivers/regulator/Kconfig | 9 ++ drivers/regulator/Makefile | 1 + drivers/regulator/mt6311-regulator.c | 208 +++++++++++++++++++++++++++++++++++ drivers/regulator/mt6311-regulator.h | 65 +++++++++++ include/linux/regulator/mt6311.h | 29 +++++ 5 files changed, 312 insertions(+) create mode 100644 drivers/regulator/mt6311-regulator.c create mode 100644 drivers/regulator/mt6311-regulator.h create mode 100644 include/linux/regulator/mt6311.h diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig index bef3bde..aab09ac 100644 --- a/drivers/regulator/Kconfig +++ b/drivers/regulator/Kconfig @@ -451,6 +451,15 @@ config REGULATOR_MC13892 Say y here to support the regulators found on the Freescale MC13892 PMIC. +config REGULATOR_MT6311 + tristate "MediaTek MT6311 PMIC" + depends on I2C + help + Say y here to select this option to enable the power regulator of + MediaTek MT6311 PMIC. + This driver supports the control of different power rails of device + through regulator interface. + config REGULATOR_MT6397 tristate "MediaTek MT6397 PMIC" depends on MFD_MT6397 diff --git a/drivers/regulator/Makefile b/drivers/regulator/Makefile index 91bf762..45e790f 100644 --- a/drivers/regulator/Makefile +++ b/drivers/regulator/Makefile @@ -60,6 +60,7 @@ obj-$(CONFIG_REGULATOR_MAX77843) += max77843.o obj-$(CONFIG_REGULATOR_MC13783) += mc13783-regulator.o obj-$(CONFIG_REGULATOR_MC13892) += mc13892-regulator.o obj-$(CONFIG_REGULATOR_MC13XXX_CORE) += mc13xxx-regulator-core.o +obj-$(CONFIG_REGULATOR_MT6311) += mt6311-regulator.o obj-$(CONFIG_REGULATOR_MT6397) += mt6397-regulator.o obj-$(CONFIG_REGULATOR_QCOM_RPM) += qcom_rpm-regulator.o obj-$(CONFIG_REGULATOR_QCOM_SPMI) += qcom_spmi-regulator.o diff --git a/drivers/regulator/mt6311-regulator.c b/drivers/regulator/mt6311-regulator.c new file mode 100644 index 0000000..d990dc9 --- /dev/null +++ b/drivers/regulator/mt6311-regulator.c @@ -0,0 +1,208 @@ +/* + * Copyright (c) 2015 MediaTek Inc. + * Author: Henry Chen + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include "mt6311-regulator.h" + +struct mt6311 { + struct device *dev; + struct regmap *regmap; + struct regulator_dev *rdev[MT6311_MAX_REGULATORS]; + int num_regulator; + int chip_cid; +}; + +static const struct regmap_config mt6311_regmap_config = { + .reg_bits = 8, + .val_bits = 8, + .max_register = MT6311_FQMTR_CON4, +}; + +/* Default limits measured in millivolts and milliamps */ +#define MT6311_MIN_UV 600000 +#define MT6311_MAX_UV 1400000 +#define MT6311_STEP_UV 6250 + +static const struct regulator_linear_range buck_volt_range[] = { + REGULATOR_LINEAR_RANGE(MT6311_MIN_UV, 0, 0x7f, MT6311_STEP_UV), +}; + +static struct regulator_ops mt6311_buck_ops = { + .list_voltage = regulator_list_voltage_linear_range, + .map_voltage = regulator_map_voltage_linear_range, + .set_voltage_sel = regulator_set_voltage_sel_regmap, + .get_voltage_sel = regulator_get_voltage_sel_regmap, + .set_voltage_time_sel = regulator_set_voltage_time_sel, + .enable = regulator_enable_regmap, + .disable = regulator_disable_regmap, + .is_enabled = regulator_is_enabled_regmap, +}; + +static struct regulator_ops mt6311_ldo_ops = { + .enable = regulator_enable_regmap, + .disable = regulator_disable_regmap, + .is_enabled = regulator_is_enabled_regmap, +}; + +#define MT6311_BUCK(_id) \ +{\ + .name = #_id,\ + .ops = &mt6311_buck_ops,\ + .of_match = of_match_ptr(#_id),\ + .regulators_node = of_match_ptr("regulators"),\ + .type = REGULATOR_VOLTAGE,\ + .id = MT6311_ID_##_id,\ + .n_voltages = (MT6311_MAX_UV - MT6311_MIN_UV) / MT6311_STEP_UV + 1,\ + .min_uV = MT6311_MIN_UV,\ + .uV_step = MT6311_STEP_UV,\ + .owner = THIS_MODULE,\ + .linear_ranges = buck_volt_range, \ + .n_linear_ranges = ARRAY_SIZE(buck_volt_range), \ + .enable_reg = MT6311_VDVFS11_CON9,\ + .enable_mask = MT6311_PMIC_VDVFS11_EN_MASK,\ + .vsel_reg = MT6311_VDVFS11_CON12,\ + .vsel_mask = MT6311_PMIC_VDVFS11_VOSEL_MASK,\ +} + +#define MT6311_LDO(_id) \ +{\ + .name = #_id,\ + .ops = &mt6311_ldo_ops,\ + .of_match = of_match_ptr(#_id),\ + .regulators_node = of_match_ptr("regulators"),\ + .type = REGULATOR_VOLTAGE,\ + .id = MT6311_ID_##_id,\ + .owner = THIS_MODULE,\ + .enable_reg = MT6311_LDO_CON3,\ + .enable_mask = MT6311_PMIC_RG_VBIASN_EN_MASK,\ +} + +static struct regulator_desc mt6311_regulators[] = { + MT6311_BUCK(VDVFS), + MT6311_LDO(VBIASN), +}; + +static int mt6311_regulator_init(struct mt6311 *chip) +{ + struct regulator_config config = { }; + int i; + + for (i = 0; i < MT6311_MAX_REGULATORS; i++) { + config.dev = chip->dev; + config.driver_data = chip; + config.regmap = chip->regmap; + + chip->rdev[i] = devm_regulator_register(chip->dev, + &mt6311_regulators[i], &config); + if (IS_ERR(chip->rdev[i])) { + dev_err(chip->dev, + "Failed to register MT6311 regulator\n"); + return PTR_ERR(chip->rdev[i]); + } + } + + return 0; +} + +/* + * I2C driver interface functions + */ +static int mt6311_i2c_probe(struct i2c_client *i2c, + const struct i2c_device_id *id) +{ + struct mt6311 *chip; + int error, ret; + unsigned int data; + + chip = devm_kzalloc(&i2c->dev, sizeof(struct mt6311), GFP_KERNEL); + if (!chip) + return -ENOMEM; + + chip->dev = &i2c->dev; + chip->regmap = devm_regmap_init_i2c(i2c, &mt6311_regmap_config); + if (IS_ERR(chip->regmap)) { + error = PTR_ERR(chip->regmap); + dev_err(chip->dev, "Failed to allocate register map: %d\n", + error); + return error; + } + + i2c_set_clientdata(i2c, chip); + + ret = regmap_read(chip->regmap, MT6311_SWCID, &data); + if (ret < 0) { + dev_err(chip->dev, "Failed to read DEVICE_ID reg: %d\n", ret); + return ret; + } + + switch (data) { + case MT6311_E1_CID_CODE: + case MT6311_E2_CID_CODE: + case MT6311_E3_CID_CODE: + chip->chip_cid = data; + break; + default: + dev_err(chip->dev, "Unsupported device id = 0x%x.\n", data); + return -ENODEV; + } + + ret = mt6311_regulator_init(chip); + + if (ret < 0) + dev_err(chip->dev, "Failed to initialize regulator: %d\n", ret); + + return ret; +} + +static const struct i2c_device_id mt6311_i2c_id[] = { + {"mt6311", 0}, + {}, +}; +MODULE_DEVICE_TABLE(i2c, mt6311_i2c_id); + +#ifdef CONFIG_OF +static const struct of_device_id mt6311_dt_ids[] = { + { .compatible = "mediatek,mt6311-regulator", + .data = &mt6311_i2c_id[0] }, + {}, +}; +MODULE_DEVICE_TABLE(of, mt6311_dt_ids); +#endif + +static struct i2c_driver mt6311_regulator_driver = { + .driver = { + .name = "mt6311", + .owner = THIS_MODULE, + .of_match_table = of_match_ptr(mt6311_dt_ids), + }, + .probe = mt6311_i2c_probe, + .id_table = mt6311_i2c_id, +}; + +module_i2c_driver(mt6311_regulator_driver); + +MODULE_AUTHOR("Henry Chen "); +MODULE_DESCRIPTION("Regulator device driver for Mediatek MT6311"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/regulator/mt6311-regulator.h b/drivers/regulator/mt6311-regulator.h new file mode 100644 index 0000000..5218db4 --- /dev/null +++ b/drivers/regulator/mt6311-regulator.h @@ -0,0 +1,65 @@ +/* + * Copyright (c) 2015 MediaTek Inc. + * Author: Henry Chen + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef __MT6311_REGULATOR_H__ +#define __MT6311_REGULATOR_H__ + +#define MT6311_SWCID 0x01 + +#define MT6311_TOP_INT_CON 0x18 +#define MT6311_TOP_INT_MON 0x19 + +#define MT6311_VDVFS11_CON0 0x87 +#define MT6311_VDVFS11_CON7 0x88 +#define MT6311_VDVFS11_CON8 0x89 +#define MT6311_VDVFS11_CON9 0x8A +#define MT6311_VDVFS11_CON10 0x8B +#define MT6311_VDVFS11_CON11 0x8C +#define MT6311_VDVFS11_CON12 0x8D +#define MT6311_VDVFS11_CON13 0x8E +#define MT6311_VDVFS11_CON14 0x8F +#define MT6311_VDVFS11_CON15 0x90 +#define MT6311_VDVFS11_CON16 0x91 +#define MT6311_VDVFS11_CON17 0x92 +#define MT6311_VDVFS11_CON18 0x93 +#define MT6311_VDVFS11_CON19 0x94 + +#define MT6311_LDO_CON0 0xCC +#define MT6311_LDO_OCFB0 0xCD +#define MT6311_LDO_CON2 0xCE +#define MT6311_LDO_CON3 0xCF +#define MT6311_LDO_CON4 0xD0 +#define MT6311_FQMTR_CON0 0xD1 +#define MT6311_FQMTR_CON1 0xD2 +#define MT6311_FQMTR_CON2 0xD3 +#define MT6311_FQMTR_CON3 0xD4 +#define MT6311_FQMTR_CON4 0xD5 + +#define MT6311_PMIC_RG_INT_POL_MASK 0x1 +#define MT6311_PMIC_RG_INT_EN_MASK 0x2 +#define MT6311_PMIC_RG_BUCK_OC_INT_STATUS_MASK 0x10 + +#define MT6311_PMIC_VDVFS11_EN_CTRL_MASK 0x1 +#define MT6311_PMIC_VDVFS11_VOSEL_CTRL_MASK 0x2 +#define MT6311_PMIC_VDVFS11_EN_SEL_MASK 0x3 +#define MT6311_PMIC_VDVFS11_VOSEL_SEL_MASK 0xc +#define MT6311_PMIC_VDVFS11_EN_MASK 0x1 +#define MT6311_PMIC_VDVFS11_VOSEL_MASK 0x7F +#define MT6311_PMIC_VDVFS11_VOSEL_ON_MASK 0x7F +#define MT6311_PMIC_VDVFS11_VOSEL_SLEEP_MASK 0x7F +#define MT6311_PMIC_NI_VDVFS11_VOSEL_MASK 0x7F + +#define MT6311_PMIC_RG_VBIASN_EN_MASK 0x1 + +#endif diff --git a/include/linux/regulator/mt6311.h b/include/linux/regulator/mt6311.h new file mode 100644 index 0000000..8473259 --- /dev/null +++ b/include/linux/regulator/mt6311.h @@ -0,0 +1,29 @@ +/* + * Copyright (c) 2015 MediaTek Inc. + * Author: Henry Chen + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef __LINUX_REGULATOR_MT6311_H +#define __LINUX_REGULATOR_MT6311_H + +#define MT6311_MAX_REGULATORS 2 + +enum { + MT6311_ID_VDVFS = 0, + MT6311_ID_VBIASN, +}; + +#define MT6311_E1_CID_CODE 0x10 +#define MT6311_E2_CID_CODE 0x20 +#define MT6311_E3_CID_CODE 0x30 + +#endif /* __LINUX_REGULATOR_MT6311_H */ -- 1.8.1.1.dirty -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/